Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “VS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Thermochemical reduction modeling in a high-temperature moving-bed reactor for energy storage: 1D model

The design of robust and efficient high-temperature thermochemical reactors and determination of operating conditions are critical steps toward enabling high-efficiency long-duration solar energy storage. This work presents a computational model for the thermal reduction of a metal oxide material (Mg-Mn-O) up to 1450 °C and the coupled complex transport phenomena in a novel tubular thermal reactor design that features the capability for a high extent-of-reduction (high energy storage density) and inherent heat recuperation. A one-dimensional model coupling counter-current gas–solid flow, two-phase heat transfer, thermochemical redox reactions, and species transport in a moving-bed reactor is developed. Simplified versions of the model are validated with published results in the literature for packed beds with both inert and reactive particles; the fully coupled model is also validated with experimental measurements of a moving-bed reactor in terms of local temperatures and oxygen release at the exit. Detailed comparisons on the effects of different boundary conditions in the reaction zone (prescribed wall temperature vs. heat flux conditions) and formulations based on a simple uniform flow assumption vs. plug flow using Ergun equation for gas flow are investigated. The results are compared with experimental measurements, and for all cases, the energy flow components in the reactor system and the thermal to chemical conversion efficiency and overall system efficiency are computed. Finally, the predicted high thermal-to-chemical efficiency ~95% and system efficiency ~30% agree with experimental measurements.

25 ENERGY STORAGE↗
DOE OSTI2022

Application of a Novel Heat Pump Model for Estimating Economic Viability and Barriers of Heat Pumps in Dairy Applications in the United States

Heat pumps represent an important opportunity for energy savings and decarbonization. This work investigates the techno-economic performance of high-temperature heat pumps (HTHPs) for use in the U.S. dairy industry. The studied heat pump performs a 50 °C temperature lift on a waste heat stream of cleaning water and applies the upgraded heat stream to a fluid milk pasteurization process. This work involved the creation of a HTHP model that estimated the coefficient of performance (COP), internal rate of return (IRR), net present value (NPV), and payback period (PBP), and emissions saved for a heat pump replacing a natural gas boiler. Capital costs, operations, and maintenance (O&M) cost, heat pump lifetime, electricity prices, natural gas prices, and a cost of carbon were varied to perform a parametric study on the factors affecting the break-even price of HTHPs. The results show that HTHP economics are highly sensitive to COP and energy price environment, and less sensitive to capital and O&M cost variance, leading to a large scatter of positive and negative NPVs based on U.S. location. PBPs demonstrate a defined threshold, based on energy price environment, below which favorable two-to-three-year PBPs predominate. This work is focused on the U.S. dairy industry, but international application in relation to fossil vs. electricity price regimes. Heat pumps have seen wider adoption in regions with a high ratio of fossil energy to electricity prices ($/MMBTU vs. $/kWh). The U.S. has plentiful natural gas resulting in lower fossil energy prices which has reduced heat pump adoption. This paper identifies potential first mover industries for HTHP adoption and their associated price regimes even in regions with lower ratios of fossil energy to electricity prices that exist many places globally.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION,↗
DOE OSTI2022

What you get is not always what you see—pitfalls in solar array assessment using overhead imagery

Effective integration planning for small, distributed solar photovoltaic (PV) arrays into electric power grids requires access to high quality data: the location and power capacity of individual solar PV arrays. Unfortunately, national databases of small-scale solar PV do not exist; those that do are limited in their spatial resolution, typically aggregated up to state or national levels. While several promising approaches for solar PV detection have been published, strategies for evaluating the performance of these models are often highly heterogeneous from study to study. The resulting comparison of these methods for practical applications for energy assessments becomes challenging and may imply that the reported performance evaluations overly optimistic. The heterogeneity comes in many forms, each of which we explore in this work: the degree of diversity of the locations and sensors (e.g. different satellites, aerial photography) from which the training and validation data originate, the validation of ground truth (manual annotation of imagery vs known solar PV locations), the level of spatial aggregation (e.g. array-level vs regional estimates), and inconsistencies in the training and validation datasets (e.g. different datasets are used for each study and those data are not always made accessible). For each, we discuss emerging practices from the literature to address them or suggest directions of future research. As part of our investigation, we evaluate solar PV identification performance in two large regions: the entire state of Connecticut and the city of San Diego, CA. In Connecticut, we also use 33,114 known parcel-level solar PV installations from Berkeley Lab’s Tracking the Sun dataset to evaluate parcel-level performance and evaluate capacity estimates using 169 municipalities. We also make our code (which we call SolarMapper), pre-trained models, training data, and predictions publicly available and provide a web portal for interactively inspecting each prediction that was made. Here our findings suggest that traditional performance evaluation of the automated identification of solar PV from satellite imagery may be optimistic due to common limitations in the validation process. The takeaways from this work are intended to inform and catalyze the large-scale practical application of automated solar PV assessment techniques by energy researchers and professionals.

14 SOLAR ENERGY↗
DOE OSTI2021

Aspects of rare earth element enrichment in Allegheny Plateau coals, Pennsylvania, USA

The Allegheny Plateau in western Pennsylvania, western Maryland, and northern West Virginia has relatively flat-lying strata with southwest-northeast-trending anticlines cored by splay faults originating from the thrust faults and southeast-northwest-trending lineaments. The lineaments define both the structural relief of the anticlines and the coal rank. Coal rank in the Pennsylvanian Allegheny Group coals is medium volatile bituminous in the region of less-prominent structural relief and low volatile bituminous in the region with more pronounced anticlines. Zinc and Cl exhibit high values in coals in the vicinity of the lineaments. Although coal rank was not a parameter in the Principal components analysis, the highest rank coals clustered together in a quadrant defined, in part, by the Zn concentration. Zinc was selected as a parameter due to its possible link with hydrothermal mineralization and Zr and TiO 2 /Al 2 O 3 were selected based on their presumed association with detrital mineral influences. The highest rare earths + Y values in benches of the Lower Kittanning coal were found at sites close to the lineaments. Negative or negligible Ce anomalies (δCe) and strongly positive Gd anomalies (δGd) suggest marine or hydrothermal influences and negative Eu anomalies (δEu) along with high TiO 2 /Al 2 O 3 values suggest a terrestrial input. In conclusion, the plots of δCe vs. δGd and δCe vs. δEu show that the low volatile bituminous coals are segregated from the other coals, suggesting that the factors that influenced coal rank also influenced the distribution of the rare earth elements.

58 GEOSCIENCES↗
DOE OSTI2025

Manganese concentration influences nitrogen cycling in agricultural soil

Manganese (Mn) can modulate nitrogen (N) transformations in soil, yet its role in agroecosystems remains understudied. We conducted a 51-day microcosm incubation with agricultural soils differing in long-term N history (N 0 , no added N; N 1 , added 225 kg N ha −1 for a duration of 27 years) and amended with soluble Mn at 0 (M 0 ), 50 (M 1 ), or 250 (M 2 ) mg kg −1 and Glyceria striata (Lam.) residue. In N 1 soils, Mn additions (both M 1 and M 2 ) lowered total mineral N by 25 % relative to N 1 M 0 at day 51 and reduced 51-day cumulative N₂O by 32 % (N 1 M 1 ) and 42 % (N 1 M 2 ) vs. N 1 M 0 , whereas effects in N 0 were negligible. Mn also depressed ammonia-oxidizing bacterial amoA gene transcripts at day 15 in N 1 M 2 vs. N 1 M 0 (2.5 fold change). This reduction was likely due to increased N loss via complete denitrification to N₂ through microbial pathways such as nitrate/nitrite-dependent manganese oxidation (NDMO), where bacteria directly used the added Mn 2+ to reduce nitrate (NO 3 − ) and nitrite (NO 2 − ) to N 2 or as Mn dependent-ammonia oxidation (Mnammox) where bacteria oxidized ammonium (NH 4 + ) to N 2 , using Mn oxides as electron acceptors that formed from the oxidation of the added Mn. Other contributing mechanisms may include Mn-induced N immobilization, toxicity, and changes in the microbial community. These mechanistic results indicate that background Mn availability and redox dynamics can shape nitrification–denitrification pathways under N-rich conditions. In conclusion, we highlight how native Mn pools and redox state may help explain observed variability in N losses and greenhouse gas production across agricultural soils.

Decomposition↗
DOE OSTI2023

Mechanical ventilation and indoor air quality in recently constructed U.S. homes in marine and cold-dry climates

Data were collected to characterize whole-house mechanical ventilation (WHMV) and indoor air quality (IAQ) in 55 homes in the Marine climate of Oregon and the Cold-Dry climate of Colorado in the U.S. Sixteen homes were monitored for two weeks, with and without WHMV operating. Ventilation airflows; airtightness; time-resolved CO 2 , PM2.5 and radon; and time-integrated NO 2 , NO X and formaldehyde were measured. Participants provided information about IAQ-impacting activities, perceptions and ventilation use. All homes had operational cooktop ventilation and bathroom exhaust. Thirty homes had equipment that could meet the ASHRAE 62.2–2010 standard with continuous or controlled runtime and 34 had some WHMV operating as found. Thirty-five of 46 participants with WHMV reported they did not know how to operate it, and only half of the systems were properly labeled. Two-week homes had lower formaldehyde, radon, CO 2 and NO (NO X -NO 2 ) when operated with WHMV, and had faster PM 2.5 decays following indoor emission events. Overall IAQ satisfaction was similar in Oregon and Colorado, but more Colorado participants (19% vs 3%) felt their IAQ could be improved and more reported dryness as a problem (58% vs. 14%). The collected data indicate that there are benefits of operating WHMV, even when continuous use may not be needed because outdoor pollutant concentrations are low and indoor sources do not present substantial challenges.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Seaweed-derived fucoidans and rhamnan sulfates serve as potent anti-SARS-CoV-2 agents with potential for prophylaxis

Seaweeds represent a rich source of sulfated polysaccharides with similarity to heparan sulfate, a facilitator of myriad virus host cell attachment. For this reason, attention has been drawn to their antiviral activity, including the potential for anti-SARS-CoV-2 activity. We have identified and structurally characterized several fucoidan extracts, including those from different species of brown macroalga, and a rhamnan sulfate from a green macroalga species. A high molecular weight fucoidan extracted from Saccharina japonica (FSjRPI-27), and a rhamnan sulfate extracted from Monostroma nitidum (RSMn), showed potent competitive inhibition of spike glycoprotein receptor binding to a heparin-coated SPR chip. This inhibition was also observed in cell-based assays using hACE2 HEK-293 T cells infected by pseudotyped SARS-CoV-2 virus with IC50 values <1 μg/mL. Effectiveness was demonstrated in vivo using hACE2–transgenic mice. Intranasal administration of FSjRPI-27 showed protection when dosed 6 h prior to and at infection, and then every 2 days post-infection, with 100 % survival and no toxicity at 104 plaque-forming units per mouse vs. buffer control. At 5-fold higher virus dose, FSjRPI-27 reduced mortality and yielded reduced viral titers in bronchioalveolar fluid and lung homogenates vs. buffer control. Furthermore, these findings suggest the potential application of seaweed-based sulfated polysaccharides as promising anti-SARS-CoV-2 prophylactics.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Optimizing iodine adsorption in functionalized metal-organic frameworks via an unprecedented positional isomerism strategy

Porous metal–organic frameworks (MOFs) have emerged as highly promising adsorbents for capturing radioiodine, a predominant fission product released during nuclear fuel reprocessing. However, systematic investigations into the correlation between MOF structure and iodine uptake capacity remain scarce. Here, we present a novel approach to enhance the iodine adsorption capacity of MOFs by optimizing linker functionalization. Using ligand-functionalized thorium-based MOFs as a structural platform, we demonstrate that ortho-amino-substitution near the node of the dicarboxylate linker significantly increases iodine adsorption capacity compared to meta-amino-substitution, where the amino groups are directed away from the node. Specifically, ortho-substituted Th-UiO-68-3,3”-(NH 2 ) 2 exhibits higher iodine uptake capacities than the meta-substituted Th-UiO-68-2,2”-(NH 2 ) 2 via both vapor diffusion-based (2.042 vs. 1.087 g/g) and solution-based (0.841 vs. 0.784 g/g) processes. Notably, the I 2 vapor adsorption capacity (2.042 g/g) of Th-UiO-68-3,3”-(NH 2 ) 2 represents the second highest among all reported Th-MOFs. Pair distribution function (PDF) studies reveal that the superior iodine uptake performance of ortho-functionalized MOFs can be attributed to the reduced steric hindrance of the amino groups compared with the meta-substituted variants. Finally, this research highlights how positional isomerism and its subtle alterations can significantly influence host–guest interactions, extending beyond simple structural considerations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Unraveling the relationship between physicochemical properties of NiFeReOx catalysts and the correlated performance toward electrochemical oxygen evolution reaction

NiFeO x catalysts with single site Re dopants exhibit much higher active and stability toward electrochemical oxygen evolution reaction (OER) compared to traditional NiFeO x catalysts. Nevertheless, the relationship between physicochemical properties of NiFeReO x catalysts and the correlated performance toward OER is unclear, which hampers to enhance the OER performance further. Herein, we prepared a series of NiFeReO x catalysts with different physicochemical properties by treating them at different temperatures (up to 350 °C) and then evaluated their performance toward OER. Here, the results show that heat treatment can convert all metal oxidation states to higher values as well as specific surface areas, which are believed to favor real active site generation and OER activity enhancement. A decrease in activity is observed with the temperature increase at the low current range, and the smallest overpotential of 248 mV at 10 mA cm −2 is achieved with the pristine NiFeReO x catalyst. In contrast, the heat-treated samples possess smaller Tafel slopes and lower charge transfer resistance likely due to enhanced intrinsic activity (from higher oxidation states) and conductivity, which facilitate the reaction kinetics and surpass the pristine sample at a large current density. Additionally, the sample treated at 350 °C exhibits a higher activity at 1000 mA cm −2 (1.68 V vs. RHE compared to pristine sample of 1.92 V vs. RHE); however, it manifests a poorer stability compared to the pristine one due to the imbalance of reconstruction/transformations that occurred on the catalyst surface during OER operation. Our work unravels the relationship between physicochemical properties of NiFeReO x catalysts and the correlated OER performance and provides valuable insights for designing NiFeReO x catalysts with high activity and durability.

Catalyst reconstruction↗
DOE OSTI2023

A framework for understanding efficient diurnal CO 2 reduction using Si and GaAs photocathodes

Integrated solar fuels and photoelectrochemical (PEC) CO 2 reduction (CO 2 R) are promising pathways toward producing value-added chemicals from CO 2 . However, improvements are needed in activity and selectivity as well as in fundamental understanding of device behavior to engender wide deployment. Here, we report two single-junction, integrated photocathodes for PEC CO 2 R based on TOPCon Si and GaAs substrates, which achieve -10 mA cm -2 at -0.33 V vs. RHE with 41% selectivity to C 2+ products and at -0.03 V vs. RHE with 27% selectivity to C 2+ products, respectively. We investigated the viability of a light-mediated strategy to direct selectivity in buried-junction PEC devices and confirmed that these devices could be optimized independently and described by the physics-based models of the individual components. Finally, we designed a framework to assess operational modes for PEC CO 2 R devices and demonstrated this framework under continuous galvanostatic control and variable illumination conditions.

14 SOLAR ENERGY↗
DOE OSTI2022

Mechanistic study of chemical looping reactions between solid carbon fuels and CuO

Copper (Cu) based chemical-looping combustion (CLC) is a promising process that utilizes solid carbon fuel such as coal and biomass. Understanding the reaction kinetics in this process can facilitate the industrial design of CLC units. Here, in this work, molecular dynamics (MD) simulations were performed to investigate the reaction kinetics of n-butane and two simplified solid carbon fuels (lignite and anthracite) with/without copper oxide (CuO) nanoparticle. In addition, experiments were conducted on the thermal characteristics, flammability, and flame speeds of CuO and solid carbon mixtures. For n-butane, oxidation on the CuO surface is the primary reaction since the activation energy of the surface reaction is much lower than that of oxygen (O 2 ) combustion (9.2 vs. 53.3 kcal/mol). On the other hand, for lignite, there is a smaller difference in the activation energy of O 2 combustion and surface reaction (23.04 vs. 6.34 kcal/mol). We hypothesize that some solid carbon fuels can have different reaction kinetics dependent upon temperature. This is proven by the case of a simplified anthracite coal: an Arrhenius plot shows that this solid carbon fuel has two different reaction kinetic regimes and the critical temperature for the change in kinetics is related to the oxygen uncoupling of the CuO nanoparticle. Like the modeling simulations, a change in activation energy is observed in the experimental results, where desorption of molecular oxygen from CuO becomes important.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Enhanced steam oxidation resistance of uranium nitride nuclear fuel pellets

Here, the steam oxidation resistance of UN and UN-(20 vol%)ZrN fuel pellets is evaluated to enhance understanding of steam corrosion mechanisms in advanced nuclear fuel materials. In situ neutron diffraction shows the modified UN fuel pellets form a (U 0.77 ,Zr 0.23 )N solid-solution and the sole crystalline oxidation product detected in bulk is (U 0.77 ,Zr 0.23 )O 2 . U 2 N 3 is not detected in significant quantities during the steam oxidation of UN or (U 0.77 ,Zr 0.23 )N and stable lattice parameters show that hydriding does not take place. Steam oxidation rates, obtained via sequential Rietveld refinement show how (U 0.77 ,Zr 0.23 )N has a higher activation energy (79 ± 1 kJmol -1 vs. 50 ± 5 kJmol -1 ), higher onset temperature (430 °C vs. 400 °C) and slower reaction rates for steam oxidation up to 616 °C, than pure UN. Throughout, both UN and (U 0.77 ,Zr 0.23 )N exhibit linear (non-protective) oxidation kinetics, signifying that degradation of the fuel pellets is caused by the evolution of gaseous products at the interface followed by oxide scale spallation. This quantitative and mechanistic understanding of material degradation enables better defined operating regimes and points towards (U,Zr)N solid solutions as a promising strategy for the design of advanced nuclear fuel materials with enhanced steam corrosion resistance.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2025

Silver diamine fluoride differentially affects dentin and hypomineralized enamel permeabilities

OBJECTIVES: To investigate the physicochemical effect of silver diamine fluoride (SDF) by correlating permeability with mineral density and elemental composition of hypomineralized enamel and carious dentin. METHODS: Enamel and dentin from human carious primary teeth with and without SDF treatment in-vivo, and hypomineralized enamel from permanent molars with and without SDF treatment in-vitro were scanned using micro X-ray computed tomography. Spatial maps of biometals (calcium, zinc), phosphorus, and silver were generated using X-ray fluorescence microprobe. Permeabilities were computed using Porous Microstructure Analysis software. RESULTS: The intrinsic permeability of SDF-treated carious dentin was 14.3 % lower than untreated sound dentin (6.39e-15 ± 3.01e-15 m² vs 7.46e-15 ± 1.82e-15 m²; P < 0.0001), while untreated carious dentin was 98.4 % higher (1.48e-14 ± 7.11e-15 m²; P < 0.0001). SDF-treated and untreated transparent dentin showed similar reduced permeabilities (75.6 % and 78.4 % lower than untreated sound dentin, respectively; P = 0.93). Severely hypomineralized enamel showed permeability reaching 108.1 % of adjacent sound dentin (5.71e-15 ± 2.04e-15 m² vs 5.28e-15 ± 1.30e-15 m²; P = 0.1409) and was significantly higher than mildly hypomineralized enamel (1.39e-15 ± 1.04e-15 m²; P < 0.0001). SDF treatment did not significantly impact the permeability of severely hypomineralized enamel (12.4 % reduction; P = 0.07). Principal component regression identified Zn level as a significant effector of tissue permeabilities in carious primary teeth (P < 0.0001). SIGNIFICANCE: This study introduces a computational method to measure dental tissue permeability, and demonstrates that SDF significantly reduces permeability in carious dentin but not intact hypomineralized enamel. The study reveals biometal Zn localization can alter dentin and enamel permeabilities, providing new insights into pathobiological mechanisms underlying caries and hypomineralization.

Chou, Conrad↗
DOE OSTI2022

Deconvoluting sources of failure in lithium metal batteries containing NMC and PEO-based electrolytes

Solid-state lithium metal batteries (SSLMBs) containing polyethylene oxide (PEO)-derived polymer electrolytes and high-voltage (> 4 V vs. Li/Li + ) cathode materials suffer from three sources of failure: (1) instability between the polymer electrolyte and cathode at high voltage, (2) instability of the polymer electrolyte with Li metal, and (3) poorly-designed cathodes. In this study, these three sources of failure are deconvoluted by studying Ni-rich LiNi x Mn y Co 1-x-y O 2 (NMC, x ≥ 0.6) cathodes and a gel polymer electrolyte (GPE) derived from PEO. Initial cycling data reveals that rapid capacity fade occurs regardless of whether soft short circuits form due to Li dendrites. Cyclic voltammetry scans on cells featuring a Li metal electrode, GPE, and a NMC811 electrode free of additives suggest that there are no runaway reactions between the GPE and NMC811 up to 4.5 V vs. Li/Li + . Cathode/cathode symmetric cell cycling demonstrates that Li metal reactivity is a prime source of failure, though a poorly-designed cathode leads to subpar performance. A cathode with single-crystal NMC particles was demonstrated to achieve better initial capacity and longer cycle life, indicating room for improvement in SSLMB cathode design. Therefore, the sources of failure as enumerated may be ranked as follows from most to least concerning: 2 > 3 > 1.

25 ENERGY STORAGE↗
DOE OSTI2020

Production and Fuel properties of Iso-Olefins with Controlled Molecular Structure and Obtained from Butene Oligomerization

The ability to control the molecular structure (e.g., degree of branching) of iso-olefins produced from oligomerizing light olefins is a valuable tool for tuning the final compositions of hydrocarbon fuels and targeting specific fuel properties. In this study, we demonstrated that the degree of branching of iso-olefins obtained from butene(s) oligomerization can be controlled by tuning process conditions (i.e., temperature, weight hourly space velocity [WHSV], and nature of butene feedstock) and by choosing the proper catalyst (i.e., Amberlyst-36 vs. Y/ZSM-22). In this study, we produced three types of iso-olefin mixtures: 1) a methyl-heptenes rich (74 wt.%) mixture, 2) dimethyl-hexenes rich (80–96 wt.%) mixtures, and 3) highly branched (i.e., more than three methyl substitutions) iso-olefins rich (>50 wt.%) mixtures. While dimethyl-hexenes are preferentially formed at lower temperatures (60–100°C) and WHSV (i.e., 2 hr-1), methyl-heptenes are favorably produced at higher temperatures (>100°C) and WHSVs (i.e., 7 hr-1) over Amberlyst-36. The use of either 1-butene or 2-butene as feedstock resulted in liquid products with similar branching because facile intramolecular isomerization occurs prior to oligomerization. However, the use of isobutylene feedstock forms a significantly more branched olefin product. The formation of highly branched iso-olefins also is favored at higher temperature (140°C) over Amberlyst-36. Using Y/ZSM-22 instead of Amberlyst-36 allowed preferential formation of less-branched methyl-heptenes. For each type of iso-olefins mixture, we determined fuel properties including research octane number (RON), motor octane number (MON), and octane sensitivity (S), which is the difference between RON and MON. We found that not only RON and MON but also S values increased with the degree of branching of these complex mixtures of iso-olefins. The highest RON of 99.7 and S value of 9.3 were obtained for a mixture of highly branched iso-olefins.

Dagle, Vanessa↗
DOE OSTI2021

Distribution of rare earth elements and other critical elements in beneficiated Pennsylvania anthracites

The Pennsylvania Anthracite Fields are in a complex tectonic and metamorphic terrain, historically hosting one of the largest concentrations of coal mining in the USA. Anthracite mining now largely consists of the surface mining of the pillars remaining from the prime years of underground mining. The geochemical study of the sized coal products and the refuse (largely rock) from three preparation plants (breakers) demonstrates that Principal components analysis (PCA) of select major oxide, minor element, and rare earth elements illustrates some differentiation among the products from the individual plants. The rock samples, with abundant quartz and metamorphic Al-Si minerals and with a lower ash-basis REE concentration than the coals, were distinctly separated from the coal samples on the PCA plots. Plots of Gd N /Gd N * vs. Eu N /Eu N * and Ce N /Ce N * vs. Eu N / Eu N * showed differentiation between the individual suites of coals showed that the refuse samples had distinct REE distributions compared to the associated coals. Further, several minor and trace elements show enrichments in the coal samples. Lithium, with concentrations of up to 314 ppm on an ash basis, is among the most promising of the critical elements, exceeding the enrichment of the REY and Sc.

58 GEOSCIENCES↗
DOE OSTI2027

Hydrotreating pine-derived catalytic fast pyrolysis oil to jet fuel: Process durability and impact of operating conditions

Hydrotreating woody biomass-derived catalytic fast pyrolysis (CFP) oil to jet fuel has the potential to enhance energy security due to the large abundance of forest and woody resources. CFP oil produced from pine over ZSM-5 was hydrotreated over sulfided NiMo/Al 2 O 3 for 410 h to study the impact of hydrotreating conditions (pressure, temperature, and weight hourly space velocity (WHSV)). The degree of deoxygenation remained high across the tested hydrotreating conditions, and the products contained < 0.01 wt% oxygen. Increasing hydrotreating pressure from 84 to 125 bar enhanced hydrogenation of aromatic rings and the formation of cycloalkanes and increasing the temperature from 385 to 400 degrees C enhanced cracking and the formation of jet-range molecules. Decreasing the weight hourly space velocity from 0.2 to 0.1 g/(g cat h) further enhanced cracking and led to higher gasoline- and lower jet fuel-range fractions. The highest jet fuel fraction (49 wt%) was obtained at 400 degrees C, 125 bar, 0.2 g/(g cat h) WHSV. CFP oils produced from pine over phosphorous-modified ZSM-5 were hydrotreated at this condition for 588 h to investigate the process durability. The hydrogenation performance of the catalyst gradually stabilized in approximately 300 h after which the product composition remained constant. Of the final hydrotreated CFP oil, 53 wt% fell in the jet fuel range with most of the tested fuel properties meeting ASTM D4054 and/or ASTM D7566 specifications. The freeze points were < -50 degrees C vs. guideline of < -40 degrees C and the viscosities at -20 degrees C were 3.8-4.1 mm 2 /s vs guideline of 8 mm 2 /s. Increasing the fraction of cycloalkanes could increase the cetane number and heating value, which did not meet the guidelines.

09 BIOMASS FUELS↗