Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Technology and Operations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1999

Technology Maturity Towards Highly Reusable Space Transportation Goals

The National Aeronautics and Space Administration's (NASA) Advanced Space Transportation Program (ASTP) has advanced key propulsion and launch vehicle systems technologies towards enabling the concepts identified by the Highly Reusable Space Transportation (HRST) Study as having significant potential for reducing the cost of access to space. The Marshall Space Flight Center (MSFC) manages the ASTP for the NASA Aero-Space Technology Enterprise. The HRST Study was conducted from 1995 through 1997 to evaluated launch concepts with the potential to reduce launch cost to $100 to $200 per pound of payload to low Earth orbit in the 2016 to 2022 timeframe. The HRST represents a generation of launch vehicles beyond the Lockheed-Martin VentureStar concept with a goal of another factor of ten reduction in launch cost below the next generation Reusable Launch Vehicle. Several concepts were developed and evaluated during the initial HRST studies. At the completion of the concept development phase in 1997, four task forces were formed to integrate the results of the study. These task forces were System Concept Definition, Operations Assessment. Cost Assessment and Technology Assessment. The Operations Assessment task force published its final report in November 1998. The Operations Assessment task force evaluated both single stage to orbit (SSTO) and two-stage to orbit (TSTO) concepts. SSTO concepts included horizontal takeoff and horizontal landing, vertical takeoff and vertical landing and vertical takeoff and horizontal landing. Horizontally launched concepts including launch assist options. SSTO concepts included airbreathing and all rocket as well as combination propulsion systems. The Operations Assessment considered the significance of performance margin, flight rate capability, reliability, launch assist, design optimization and technology development. These studies serve as a guide for the ASTP to prioritize technology development towards future highly reusable launch systems. Although the ASTP supports the development of technology that is focused at a near term fully reusable launch vehicle, the core of the technology development is looking ahead to future generations of launch vehicles that will enable dramatic growth in civil and commercial space enterprise. The primary focus of the paper is to status the key enabling technologies including rocket based combined cycle (RBCC) propulsion, magnetic launch assist, long life, low weight rocket propulsion, integral hot structures. robust thermal protection systems and integrated vehicle health management. The ASTP technology roadmap is leading rapidly towards system demonstration and eventual future X vehicle flight demonstrations.

Lyles, Garry↗
NASA NTRS2008

Introduction to the Portable Life Support Schematic and Technology Development Components

Conger presented the operations and functions of the baseline Constellation Program (CxP) Portable Life Support System (PLSS) schematic and key development technologies. He explained the functional descriptions of the schematic components in the fluid systems of the PLSS for multiple operational scenarios. PLSS subsystems include the oxygen subsystem, the ventilation subsystem, and the thermal subsystem. He also presented the operational PLSS modes: Nominal EVA mode, Umbilical - no recharge mode, Umbilical - with recharge mode, BENDS mode, BUDDY mode, Secondary oxygen mode, and the PLSS-removed umbilical mode.

Conger, Bruce↗
NASA NTRS2000

X-33, Demonstrating Revolutionary Operations for VentureStar(TM)

The X-33, reusable space plane technology demonstrator is on course to begin the flights of the X-33 by the end of 2002 that will serve as a basis for industry and government decisions that could lead to VentureStar(Trademark). Lockheed Martin has placed the VentureStar LLC in it's Space Company and is now competing in an industry wide effort that will permit NASA to select a Second Generation RLV source by 2005. This move provides the focus for firm business planning needed to enable the decision by the time X-33 flies in mid 2002 and possibly with upgraded technologies a year or so later. The operations concept for the X-33 is an integration of launch vehicle and aircraft operations approaches. VentureStar is a Single Stage To Orbit (SSTO) and will therefore enable a new approach to Space Launch Operations that is more "aircraft like" and can produce substantially lower operating costs over current systems. NASA's initiatives over the past several years in Reusable Launch Vehicles (RLV) have had as a primary objective to demonstrate technologies that will result in significant reduction in costs of space access. Further, the end objective is to commercialize the development and operations of the next generation RLV. Hence, the X-33 and its operations demonstration is a major contributor to that next generation system.

Austin, Robert E.↗
NASA NTRS1985

Summary presentation to the Artificial Gravity Panel

General requirements for artificial gravity under a wide range of circumstances are considered. Appropriate or feasible ways of filling these requirements are explored with the focus on using tethers. The orbiter itself does not appear to be a good platform for tether research and development. Therefore, tethers that would be attached to space stations are emphasized. However, orbiter demonstrations and external tank demonstrations might be useful in exploring and developing tether operations prior to the space station. The general recommendations include requirements of artificial gravity in medicine and physiology, technology, microgravity sciences, habitability, operations in space, and what artificial gravity would mean to operations in space.

Butler, G.↗
NASA NTRS2010

FAILSAFE Health Management for Embedded Systems

The FAILSAFE project is developing concepts and prototype implementations for software health management in mission- critical, real-time embedded systems. The project unites features of the industry-standard ARINC 653 Avionics Application Software Standard Interface and JPL s Mission Data System (MDS) technology (see figure). The ARINC 653 standard establishes requirements for the services provided by partitioned, real-time operating systems. The MDS technology provides a state analysis method, canonical architecture, and software framework that facilitates the design and implementation of software-intensive complex systems. The MDS technology has been used to provide the health management function for an ARINC 653 application implementation. In particular, the focus is on showing how this combination enables reasoning about, and recovering from, application software problems.

Horvath, Gregory A.↗
NASA NTRS2014

Biomedical Monitoring By A Novel Noncontact Radio Frequency Technology Project

The area of Space Health and Medicine is one of the NASA's Space Technology Grand Challenges. Space is an extreme environment which is not conducive to human life. The extraterrestrial environment can result in the deconditioning of various human physiological systems and thus require easy to use physiological monitoring technologies in order to better monitor space crews for appropriate health management and successful space missions and space operations. Furthermore, the Space Technology Roadmap's Technology Area Breakdown Structure calls for improvements in research to support human health and performance (Technology Area 06). To address these needs, this project investigated a potential noncontact and noninvasive radio frequency-based technique of monitoring central hemodynamic function in human research subjects in response to orthostatic stress.

Portfolio↗
NASA NTRS2011

A Vision of Quantitative Imaging Technology for Validation of Advanced Flight Technologies

Flight-testing is traditionally an expensive but critical element in the development and ultimate validation and certification of technologies destined for future operational capabilities. Measurements obtained in relevant flight environments also provide unique opportunities to observe flow phenomenon that are often beyond the capabilities of ground testing facilities and computational tools to simulate or duplicate. However, the challenges of minimizing vehicle weight and internal complexity as well as instrumentation bandwidth limitations often restrict the ability to make high-density, in-situ measurements with discrete sensors. Remote imaging offers a potential opportunity to noninvasively obtain such flight data in a complementary fashion. The NASA Hypersonic Thermodynamic Infrared Measurements Project has demonstrated such a capability to obtain calibrated thermal imagery on a hypersonic vehicle in flight. Through the application of existing and accessible technologies, the acreage surface temperature of the Shuttle lower surface was measured during reentry. Future hypersonic cruise vehicles, launcher configurations and reentry vehicles will, however, challenge current remote imaging capability. As NASA embarks on the design and deployment of a new Space Launch System architecture for access beyond earth orbit (and the commercial sector focused on low earth orbit), an opportunity exists to implement an imagery system and its supporting infrastructure that provides sufficient flexibility to incorporate changing technology to address the future needs of the flight test community. A long term vision is offered that supports the application of advanced multi-waveband sensing technology to aid in the development of future aerospace systems and critical technologies to enable highly responsive vehicle operations across the aerospace continuum, spanning launch, reusable space access and global reach. Motivations for development of an Agency level imagery-based measurement capability to support cross cutting applications that span the Agency mission directorates as well as meeting potential needs of the commercial sector and national interests of the Intelligence, Surveillance and Reconnaissance community are explored. A recommendation is made for an assessment study to baseline current imaging technology including the identification of future mission requirements. Development of requirements fostered by the applications suggested in this paper would be used to identify technology gaps and direct roadmapping for implementation of an affordable and sustainable next generation sensor/platform system.

Horvath, Thomas J.↗
NASA NTRS2010

Enhanced Vision for All-Weather Operations Under NextGen

Recent research in Synthetic/Enhanced Vision technology is analyzed with respect to existing Category II/III performance and certification guidance. The goal is to start the development of performance-based vision systems technology requirements to support future all-weather operations and the NextGen goal of Equivalent Visual Operations. This work shows that existing criteria to operate in Category III weather and visibility are not directly applicable since, unlike today, the primary reference for maneuvering the airplane is based on what the pilot sees visually through the "vision system." New criteria are consequently needed. Several possible criteria are discussed, but more importantly, the factors associated with landing system performance using automatic and manual landings are delineated.

Bailey, Randall E.↗
NASA NTRS1993

NASA Operational Environment Team (NOET): NASA's key to environmental technology

NASA has stepped forward to face the environmental challenge to eliminate the use of Ozone-Layer Depleting Substances (OLDS) and to reduce our Hazardous Air Pollutants (HAP) by 50 percent in 1995. These requirements have been issued by the Clean Air Act, the Montreal Protocol, and various other legislative acts. A proactive group, the NASA Operational Environment Team or NOET, received its charter in April 1992 and was tasked with providing a network through which replacement activities and development experiences can be shared. This is a NASA-wide team which supports the research and development community by sharing information both in person and via a computerized network, assisting in specification and standard revisions, developing cleaner propulsion systems, and exploring environmentally-compliant alternatives to current processes.

Cook, Beth↗
NASA NTRS2010

Concept of Operation for Tactical Separation Assurance in Super-Density Operations

The Airspace Systems Program is committed to supporting the Next Generation Air Transportation System through research and development in select areas. One such area, referred to as Super Density Operations, is conducting research to develop technologies that will safely increase the throughput in busy terminal area environments. The purpose of this document is to develop a Concept of Operations for the Tactical Separation Assurance function, one of the functions included in Super Density Operations. A functional description of the technologies required for Super Density Operations is presented followed by a more detail description of the Tactical Separation Assurance function. Two story boards are presented to illustrate the operational use of the Tactical Separation Assurance function under different situations. The last section proposes a pathway to implementing the Tactical Separation Assurance function.

Denery, Dallas G.↗
NASA NTRSDate not supplied

Astrobee ISS Free Flyers: Overview and Enabling Technologies

The Astrobee robots began operations on the International Space Station (ISS) in April of 2019. These 32-cm-wide, 9-kg, cube-shaped free flyers are capable of autonomously traversing the US Orbital Segment of ISS and performing tasks to assist astronauts in their day-to-day activities. The Astrobee Facility also provides an on-orbit testbed for guest scientists desiring to try new technologies in zero-g. This presentation will provide an overview of the Astrobee system and some of its key enabling technologies, including propulsion, navigation, and human interfaces. Additional information and publications can be found on the Astrobee website: https://www.nasa.gov/astrobee.

Astrobee↗
NASA NTRS2001

Evolvable Hardware for Extreme Environments: Hot or Cold

Temperature tolerant electronics and long life survivability are key capabilities required for future NASA/JPL missions. Current approaches to electronics for extreme environments focus on component level robustness and hardening. Compensation techniques, e.g., as offered by bias cancellation circuits, have also been employed. This paper presents a novel approach, based on evolvable hardware technology, which allows adaptive in situ circuit redesign/reconfiguration during the operation in the environment. This technology would complement material/device advancements and bring closer the success of missions in harsh environments. Additional information is contained in the original extended abstract.

Stoica, A.↗
NASA NTRS2006

Extreme Temperature Electronics Using a Reconfigurable Analog Array

Temperature and radiation tolerant electronics, as well as long life survivability are key capabilities required for future NASA missions. Current approaches to electronics for extreme environments focus on component level robustness and hardening. Compensation techniques such as bias cancellation circuitry have also been employed. However, current technology can only ensure very limited lifetime in extreme environments. Previous work presented a novel approach, based on evolvable hardware technology, which allows adaptive in-situ circuit redesign/reconfiguration during operation in extreme environments. This technology would complement material/device advancements and increase the mission capability to survive harsh environments. This work describes a new reconfigurable analog chip developed by JPL and SPAWAR that is targeted for extreme temperature and evolutionary hardware experiments. Being based on Gm-C technology, this chip can have its functionality tuned and adapted to extreme temperatures through voltage bias adjustment. This tuning process will be controlled by Evolutionary Algorithms. This paper presents details of the reconfigurable analog chip as well as a system level overview. Some early experiments are also described.

evolvable hardware↗
NASA NTRS2010

Fastener Capture Plate Technology to Contain On-Orbit Debris

The Fastener Capture Plate technology was developed to solve the problem of capturing loose hardware and small fasteners, items that were not originally intended to be disengaged in microgravity, thus preventing them from becoming space debris. This technology was incorporated into astronaut tools designed and successfully used on NASA s Hubble Space Telescope Servicing Mission #4. The technology s ultimate benefit is that it allows a very time-efficient method for disengaging fasteners and removing hardware while minimizing the chances of losing parts or generating debris. The technology aims to simplify the manual labor required of the operator. It does so by optimizing visibility and access to the work site and minimizing the operator's need to be concerned with debris while performing the operations. It has a range of unique features that were developed to minimize task time, as well as maximize the ease and confidence of the astronaut operator. This paper describes the technology and the astronaut tools developed specifically for a complicated on-orbit repair, and it includes photographs of the hardware being used in outer space.

Eisenhower, Kevin↗
NASA NTRS2009

Aeronautics and Space Report of the President: Fiscal Year 2009 Activities

In fiscal year 2009 (FY 09), the Exploration Systems Mission Directorate's (ESMD) Advanced Capabilities Division (ACD) provided critical research and technology products that reduced operational and technical risks for the flight systems being developed by the Constellation Program.1 These products addressed high-priority technology requirements for lunar exploration; risk mitigation related to astronaut health and performance; basic research in life and physical sciences using the International Space Station (ISS), free-flying spacecraft, and ground-based laboratories; and lunar robotic missions to gather data relevant to future human lunar missions.

Source record↗
NASA NTRS2004

High temperature experiments using programmable transistor array

Temperature and radiation tolerant electronics, as well as long life survivability are key capabilities required for future NASA missions. Current approaches to electronics for extreme environments focus on component level robustness and hardening. Compensation techniques such as bias cancellation circuitry have also been employed. However, current technology can only ensure very limited lifetime in extreme environments. This paper presents a novel approach, based on evolvable hardware technology, which allows adaptive in-situ circuit redesign/reconfiguration during operation in extreme environments. This technology would complement material/device advancements and increase the mission capability to survive harsh environments. The approach is demonstrated on a mixed-signal programmable chip, which recovers functionality until 280oC. We show in this paper the functionality recovery at high temperatures for a variety of circuits, including rectifiers, amplifiers and filters.

Duong, Vu↗
NASA NTRS1987

On-board processing satellite network architecture and control study

The market for telecommunications services needs to be segmented into user classes having similar transmission requirements and hence similar network architectures. Use of the following transmission architecture was considered: satellite switched TDMA; TDMA up, TDM down; scanning (hopping) beam TDMA; FDMA up, TDM down; satellite switched MF/TDMA; and switching Hub earth stations with double hop transmission. A candidate network architecture will be selected that: comprises multiple access subnetworks optimized for each user; interconnects the subnetworks by means of a baseband processor; and optimizes the marriage of interconnection and access techniques. An overall network control architecture will be provided that will serve the needs of the baseband and satellite switched RF interconnected subnetworks. The results of the studies shall be used to identify elements of network architecture and control that require the greatest degree of technology development to realize an operational system. This will be specified in terms of: requirements of the enabling technology; difference from the current available technology; and estimate of the development requirements needed to achieve an operational system. The results obtained for each of these tasks are presented.

Campanella, S. Joseph↗
NASA NTRS1989

Hybrid propulsion technology program: Phase 1. Volume 3: Thiokol Corporation Space Operations

Three candidate hybrid propulsion (HP) concepts were identified, optimized, evaluated, and refined through an iterative process that continually forced improvement to the systems with respect to safety, reliability, cost, and performance criteria. A full scale booster meeting Advanced Solid Rocket Motor (ASRM) thrust-time constraints and a booster application for 1/4 ASRM thrust were evaluated. Trade studies and analyses were performed for each of the motor elements related to SRM technology. Based on trade study results, the optimum HP concept for both full and quarter sized systems was defined. The three candidate hybrid concepts evaluated are illustrated.

Schuler, A. L.↗