Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRAILS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Aeroelastic Modeling of Elastically Shaped Aircraft Concept via Wing Shaping Control for Drag Reduction

Lightweight aircraft design has received a considerable attention in recent years as a means for improving cruise efficiency. Reducing aircraft weight results in lower lift requirements which directly translate into lower drag, hence reduced engine thrust requirements during cruise. The use of lightweight materials such as advanced composite materials has been adopted by airframe manufacturers in current and future aircraft. Modern lightweight materials can provide less structural rigidity while maintaining load-carrying capacity. As structural flexibility increases, aeroelastic interactions with aerodynamic forces and moments become an increasingly important consideration in aircraft design and aerodynamic performance. Furthermore, aeroelastic interactions with flight dynamics can result in issues with vehicle stability and control. Abstract This paper describes a recent aeroelastic modeling effort for an elastically shaped aircraft concept (ESAC). The aircraft model is based on the rigid-body generic transport model (GTM) originally developed at NASA Langley Research Center. The ESAC distinguishes itself from the GTM in that it is equipped with highly flexible wing structures as a weight reduction design feature. More significantly, the wings are outfitted with a novel control effector concept called variable camber continuous trailing edge (VCCTE) flap system for active control of wing aeroelastic deflections to optimize the local angle of attack of wing sections for improved aerodynamic efficiency through cruise drag reduction and lift enhancement during take-off and landing. The VCCTE flap is a multi-functional and aerodynamically efficient device capable of achieving high lift-to-drag ratios. The flap system is comprised of three chordwise segments that form the variable camber feature of the flap and multiple spanwise segments that form a piecewise continuous trailing edge. By configuring the flap camber and trailing edge shape, drag reduction could be achieved. Moreover, some parts of the flap system can be made to have a high frequency response for roll control, gust load alleviation, and aeroservoelastic (ASE) modal suppression control. Abstract The aeroelastic model of the ESAC is based on one-dimensional structural dynamic theory that captures the aeroelastic deformation of a wing structure in a combined motion that involves flapwise bending, chordwise bending, and torsion. The model includes the effect of aircraft propulsion due to wing flexibility which causes the propulsive forces and moments to couple with the wing elastic motion. Engine mass is also accounted in the model. A fuel management model is developed to describe the wing mass change due to fuel usage in the main tank and wing tanks during cruise. Abstract The model computes both static and dynamic responses of the wing structures. The static aeroelastic deflections are used to estimate the effect of wing flexibility on induced drag and the potential drag reduction by the VCCTE flap system. A flutter analysis is conducted to estimate the flutter speed boundary. Gust load alleviation via adaptive control has been recently investigated to address flexibility of aircraft structures. A multi-objective flight control approach is presented for drag reduction control. The approach is based on an optimal control framework using a multi-objective cost function. Future studies will demonstrate the potential benefits of the approach.

Aeroelasticity↗

Shed Vortex Structure and Phase-Averaged Velocity Statistics in Symmetric/Asymmetric Turbulent Flat Plate Wakes

The near wake of a flat plate is investigated via direct numerical simulations (DNS). Many earlier experimental investigations have used thin plates with sharp trailing edges and turbulent boundary layers to create the wake. This results in large theta divided by D (sub TE) values (theta is the boundary layer momentum thickness towards the end of the plate and D (sub TE) is the trailing edge thickness). In the present study the emphasis is on relatively thick plates with circular trailing edges (CTE) resulting in theta divided by D values less than one (D is the plate thickness and the diameter of the CTE), and vigorous vortex shedding. The Reynolds numbers based on the plate length and D are 1.255 x 10 (sup 6) and 10,000, respectively. Two cases are computed; one with turbulent boundary layers on both the upper and lower surfaces of the plate (statistically the same, symmetric wake, Case TT) and, a second with turbulent and laminar boundary layers on the upper and lower surfaces, respectively (asymmetric case, Case TL). The data and understanding obtained is of considerable engineering interest, particularly in turbomachinery where the pressure side of an airfoil can remain laminar or transitional because of a favorable pressure gradient and the suction side is turbulent. Shed-vortex structure and phase-averaged velocity statistics obtained in the two cases are compared here. The upper negative shed vortices in Case TL (turbulent separating boundary layer) are weaker than the lower positive ones (laminar separating boundary layer) at inception (a factor 1.27 weaker in terms of peak phase-averaged spanwise vorticity at first appearance of a peak). The upper vortices weaken rapidly as they travel downstream. A second feature of interest in Case TL is a considerable increase in the peak phase-averaged, streamwise normal intensity (random component) with increasing streamwise distance (x divided by D) that occurs nears the positive vortex cores. This behavior is observed for a few diameters in the near wake. This is counter to Case TT where the peak value essentially decreases with increasing x divided by D. Both these effects are examined in detail and the important contributors are identified.

direct numerical simulations↗

Design, Development, and Flight Evaluation of Pilot Displays and Long-Track Control for Wake Surfing Applications

From April to May 2017, the National Aeronautics and Space Administration Armstrong Flight Research Center completed a series of flights with a trail C-20A airplane surfing in the wake of a Gulfstream III airplane using a commercially available datalink as the primary communication between the two aircraft. The purpose of this test was to characterize the aerodynamic benefits received by the trail airplane flying in the upwash portion of the wake generated from the lead airplane. Lateral and vertical relative position to the wake were automatically controlled through an experimental programmable autopilot on the C-20A airplane. Long-track, the separation distance between the two aircraft, was maintained by test pilots managing throttle position using customized cockpit displays. These displays provided the pilots with throttle cues for maintaining long-track position and situational awareness of the wake vortex relative to the position of the trail airplane. Flight testing demonstrated the ability of the pilots to use these displays to maintain a safe long-track distance, but found there to be trades between tracking performance and the frequency of throttle motion. The wake awareness display provided the pilots with adequate situational awareness of the wake vortex during the flight experiment. This paper presents a summary of the design, development, and flight evaluation of the pilot displays and long-track control.

aircraft↗

TPSAS-NF1676L-12439-DND

Goal: Increase aircraft throughput at the runway threshold by controlling the spacing between aircraft to a greater precision than can be accomplished today. APS is a time-based spacing concept, today’s system relies on distance-based spacing. ATC determines a spacing interval between a leading and trailing aircraft, then issues a clearance to the trailing aircraft with that interval. The trailing aircraft performs speed changes during its approach to achieve its assigned time spacing with respect to the leading aircraft at the runway threshold. The first in a chain of aircraft does not have a leading aircraft and is assigned a required time of arrival (RTA) at the runway threshold.

Frederick Wieland↗

Aircraft System Noise Assessment of the NASA Single-Aisle Over-the-Wing Nacelle Configuration

A system noise assessment of the NASA single-aisle over-wing nacelle configuration, the OWN160, is carried out to estimate the performance of the configuration relative to NASA noise goals. The vehicle was first designed during the Environmentally Responsible Aviation(ERA)project, and last analyzed in 2016.Renewed interest in the concept necessitates an updated acoustic prediction. A model for jet-trailing edge interaction noise is developed from experimental data and included in the system noise assessment and analysis. Total system noise is predicted using NASA’s research-level Aircraft Noise Prediction Program (ANOPP-Research). Results are evaluated with and without the jet-trailing edge effect and compared to prior analysis and an equivalent conventional aircraft configuration, the TW160. The jet-trailing edge interaction affects the noise source ranking and increases the total noise of the OWN160, but the concept retains an advantage for noise reduction when compared to the conventional configuration with a cumulative reduction of 7.7 EPNdB (ERA results showed a 9.7 EPNdB reduction).

Kelly M Shelts↗

Wake Disturbance-Based Separation Evaluation for Urban Air Mobility Aircraft

This paper builds upon previous research to evaluate Urban Air Mobility (UAM) flight dynamics in the presence of wake disturbances. A model for fixed-wing-generated wake effects is applied to a Revolutionary Vertical Lift Technology (RVLT) Lift+Cruise UAM trail aircraft operating in the fixed-wing Cruise configuration. The wake effects are evaluated at various longitudinal and latitudinal separation configurations to determine the most hazardous wake encounter situation. Trim calculations and closed-loop simulations show a trailing aircraft flying directly into a wake vortex as the most hazardous scenario. Furthermore, trailing behind a larger aircraft at similar speeds greatly increases the safe separation distance. These considerations indicate a need for dynamic pairwise separation criteria to enable dense Advanced Air Mobility (AAM) operations while maintaining safety.

Urban Air Mobility↗

JWST Reveals CO Ice, Concentrated CO 2 Deposits, and Evidence for Carbonates Potentially Sourced From Ariel’s Interior

The Uranian moon Ariel exhibits a diversity of geologically young landforms, with a surface composition rich in CO 2 ice. The origin of CO 2 and other species, however, remains uncertain. We report observations of Ariel’s leading and trailing hemispheres, collected with NIRSpec (2.87–5.10 μm) on the James Webb Space Telescope. These data shed new light on Arielʼs spectral properties, revealing a double-lobed CO 2 ice scattering peak centered near 4.20 and 4.25 μm, with the 4.25 μm lobe possibly representing the largest CO 2 Fresnel peak yet observed in the solar system. A prominent 4.38 μm 13 CO 2 ice feature is also present, as is a 4.90 μm band that results from 12 CO 2 ice. The spectra reveal a 4.67 μm 12 CO ice band and a broad 4.02 μm band that might result from carbonate minerals. The data confirm that features associated with CO 2 and CO are notably stronger on Ariel’s trailing hemisphere compared to its leading hemisphere. We compared the detected CO 2 features to synthetic spectra of CO 2 ice and mixtures of CO 2 with CO, H 2 O, and amorphous carbon, finding that CO 2 could be concentrated in deposits thicker than ∼10 mm on Ariel’s trailing hemisphere. Comparison to laboratory data indicates that CO is likely mixed with CO 2 . The evidence for thick CO 2 ice deposits and the possible presence of carbonates on both hemispheres suggests that some carbon oxides could be sourced from Ariel’s interior, with their surface distributions modified by charged particle bombardment, sublimation, and seasonal migration of CO and CO 2 from high to low latitudes.

Uranian satellites↗

Wavy flow cooling concept for turbine airfoils

An airfoil including an outer wall and a cooling cavity formed therein. The cooling cavity includes a leading edge flow channel located adjacent a leading edge of the airfoil and a trailing edge flow channel located adjacent a trailing edge of the airfoil. Each of the leading edge and trailing edge flow channels define respective first and second flow axes located between pressure and suction sides of the airfoil. A plurality of rib members are located within each of the flow channels, spaced along the flow axes, and alternately extending from opposing sides of the flow channels to define undulating flow paths through the flow channels.

Liang, George↗

Methods and systems to enhance flame holding in a gas turbine engine

A fuel nozzle including a swirler assembly that includes a shroud, a hub, and a plurality of vanes extending between the shroud and the hub. Each vane includes a pressure sidewall and an opposite suction sidewall coupled to the pressure sidewall at a leading edge and at a trailing edge. At least one suction side fuel injection orifice is formed adjacent to the leading edge and extends from a first fuel supply passage to the suction sidewall. A fuel injection angle is oriented with respect to the suction sidewall. The suction side fuel injection orifice is configured to discharge fuel outward from the suction sidewall. At least one pressure side fuel injection orifice extends from a second fuel supply passage to the pressure sidewall and is substantially parallel to the trailing edge. The pressure side fuel injection orifice is configured to discharge fuel tangentially from the trailing edge.

33 ADVANCED PROPULSION SYSTEMS↗

Photovoltaic module with removable wind deflector

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

14 SOLAR ENERGY↗

Turbine blade squealer tip rail with fence members

A turbine blade includes an airfoil, a blade tip section, a squealer tip rail, and a plurality of chordally spaced fence members. The blade tip section includes a blade tip floor located at an end of the airfoil distal from the root. The blade tip floor includes a pressure side and a suction side joined together at chordally spaced apart leading and trailing edges of the airfoil. The squealer tip rail extends radially outwardly from the blade tip floor adjacent to the suction side and extends from a first location adjacent to the airfoil trailing edge to a second location adjacent to the airfoil leading edge. The fence members are located between the airfoil leading and trailing edges and extend radially outwardly from the blade tip floor and axially from the squealer tip rail toward the pressure side.

42 ENGINEERING↗

Photovoltaic module with removable wind deflector

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

25 ENERGY STORAGE↗

Photovoltaic module with removable wind deflector

A photovoltaic (PV) module assembly including a PV module, a deflector, and a clip. The PV module includes a PV device and a frame. A PV laminate is assembled to the frame, and the frame includes a support arm forming a seat. The deflector defines a front face and a rear face, with the clip extending from either the trailing frame member or the rear face of the deflector. In a mounted state, the deflector is nested within the seat and is releasably mounted to the trailing frame member via the clip. In some embodiments, the support arm forms a second seat, with the PV module assembly providing a second mounted state in which the deflector is in a differing orientation/slope, nested within the second seat and releasably mounted to the trailing frame member via the clip.

14 SOLAR ENERGY↗

Gas turbine engine exhaust diffuser including circumferential vane

A flow passage defined between an inner and an outer boundary for guiding a fluid flow in an axial direction. A flow control vane is supported at a radial location between the inner and outer boundaries. A fluid discharge opening is provided for discharging a flow of the compressed fluid from a trailing edge of the vane, and a fluid control surface is provided adjacent to the fluid discharge opening and extends in the axial direction at the trailing edge of the vane. The fluid control surface has a curved trailing edge forming a Coanda surface. The fluid discharge opening is selectively provided with a compressed fluid to produce a Coanda effect along the control surface. The Coanda effect has a component in the radial direction effecting a turning of the fluid flow in the flow path radially inward or outward toward one of the inner and outer boundaries.

33 ADVANCED PROPULSION SYSTEMS↗

Airfoil

An airfoil includes a leading edge, a trailing edge downstream from the leading edge, a pressure surface between the leading and trailing edges, and a suction surface between the leading and trailing edges and opposite the pressure surface. A first convex section on the suction surface decreases in curvature downstream from the leading edge, and a throat on the suction surface is downstream from the first convex section. A second convex section is on the suction surface downstream from the throat, and a first convex segment of the second convex section increases in curvature.

33 ADVANCED PROPULSION SYSTEMS↗

Turbine blades and systems with forward blowing slots

A blade for use in a wind turbine comprises a pressure side and suction side meeting at a trailing edge and leading edge. The pressure side and suction side provide lift to the turbine blade upon the flow of air from the leading edge to the trailing edge and over the pressure side and suction side. The blade includes one or more openings at the suction side, in some cases between the leading edge and the trailing edge. The one or more openings are configured to provide a pressurized fluid towards the leading edge of the blade, in some cases at an angle between about 0.degree. and 70.degree. with respect to an axis oriented from a centerline of the blade toward the leading edge.

17 WIND ENERGY↗

Turbine blades and systems with forward blowing slots

A blade for use in a wind turbine comprises a pressure side and suction side meeting at a trailing edge and leading edge. The pressure side and suction side provide lift to the turbine blade upon the flow of air from the leading edge to the trailing edge and over the pressure side and suction side. The blade includes one or more openings at the suction side, in some cases between the leading edge and the trailing edge. The one or more openings are configured to provide a pressurized fluid towards the leading edge of the blade, in some cases at an angle between about 0.degree. and 70.degree. with respect to an axis oriented from a centerline of the blade toward the leading edge.

Zuteck, Michael D.↗

Arrangement for a gas turbine combustion engine

An arrangement (10) for delivering gases from combustors (15) to a first row of blades. The arrangement (10) includes at least an upstream flow path (60) including an aft first side wall (64) and a downstream flow path (62) including a forward second side wall (66). A convergence junction trailing edge (40) is defined at a downstream terminal edge (41) of the first side wall (64), and the second side wall (66) converges toward the first side wall (64) in the direction of the convergence junction trailing edge (40). An impingement sheet structure (78) is located between and provides impingement cooling air to the first and second side walls (64, 66). Openings (88) provide a cooling air passage between the first and second side walls (64, 66) and provide a flow of post impingement air into the gas path at the convergence junction trailing edge (40).

33 ADVANCED PROPULSION SYSTEMS↗