Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “TRACKING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1972

An experiment to determine the relative positions of two collocated laser tracking stations

Two Goddard Space Flight Center laser tracking stations were collocated for a short time towards the end of 1971 for the purposes of comparing their tracking performance and quality. The lasers, only 25 meters apart, obtained simultaneous tracking data on eighteen passes of the Beacon Explorer C spacecraft. These data have now been used to determine the location of one laser with respect to the other with the result that the computed position of the second laser agrees with the surveyed position to 4 centimeters in latitude and height, and 1 centimeter in longitude.

Dunn, P. J.↗
NASA NTRS1971

An error analysis of the recovery capability of the relative sea-surface profile over the Puerto Rican trench from multi-station and ship tracking of GEOS-2

Error analyses were performed to examine the height error in a relative sea-surface profile as determined by a combination of land-based multistation C-band radars and optical lasers and one ship-based radar tracking the GEOS 2 satellite. It was shown that two relative profiles can be obtained: one using available south-to-north passes of the satellite and one using available north-to-south type passes. An analysis of multi-station tracking capability determined that only Antigua and Grand Turk radars are required to provide satisfactory orbits for south-to-north type satellite passes, while a combination of Merritt Island, Bermuda, and Wallops radars provide secondary orbits for north-to-south passes. Analysis of ship tracking capabilities shows that high elevation single pass range-only solutions are necessary to give only moderate sensitivity to systematic error effects.

Stanley, H. R.↗
NASA NTRS1973

Tracking and data system support for the Mariner Mars 1971 mission. Volume 3: Orbit insertion through end of primary mission

The Tracking and Data System (TDS) Support for the Mariner Mars 1971 Mission final report contains the deep space tracking and data acquisition activities in support of orbital operations. During this period a major NASA objective was accomplished: completion of the 180th revolution and 90th day of data gathering with the spacecraft about the planet Mars. Included are presentations of the TDS flight support pass chronology data for each of the Deep Space Stations used, and performance evaluation for the Deep Space Network Telemetry, Tracking, Command, and Monitor Systems. With the loss of Mariner 8 at launch, Mariner 9 assumed the mission plan of Mariner 8, which included the TV mapping cycles and a 12-hr orbital period. The mission plan was modified as a result of a severe dust storm on the surface of Mars, which delayed the start of the TV mapping cycles. Thus, the end of primary mission date was extended to complete the TV mapping cycles.

Barnum, P. W.↗
NASA NTRS1973

Mechanical erasure of particle tracks - A tool for lunar microstratigraphic chronology.

Mechanical erasure of particle tracks caused by impact deformation is shown to be a common feature of lunar soil grains. Etching of lunar pyroxenes reveals deformation markings that are evidence of prior impact events. The soil microstratigraphic chronology can be derived if it is assumed that the minimum track density in a thin soil layer is commonly found in grains where such erasure was caused by the impact that deposited the soil. With Apollo 12 core samples as examples, the minimum track density found in each layer is used to calculate the longest exposure that layer could have received since it was last disturbed. By summing the upper limits on the exposure times of the different layers, a lower limit on the average deposition rate was estimated to be 0.35 cm/m.y.

Fleischer, R. L.↗
NASA NTRS1974

Tracking system analytic calibration activities for the Mariner Mars 1971 mission

This report describes the functions of the Tracking System Analytic Calibration activity for Mariner Mars 1971 (MM'71), its objectives for this and future missions, and the support provided to the MM'71 Navigation Team during operations. The support functions encompass calibration of tracking data by estimating physical parameters whose uncertainties represent limitations to navigational accuracy, and detailed analysis of the tracking data to uncover and resolve any anomalies. Separate articles treat the activities and results of producing calibrations for the various error sources: Deep Space Station Locations, timing and polar motion, charged particles, and the troposphere. Two other articles are also included dis- - cussing the effects of the media error sources on orbit determination and the merits of the smoothing technique used for DRIVID.

Facilities↗
NASA NTRS1974

The tracking system analytic calibration activity for Mariner Mars 1971: Its function and scope

The functions of the Tracking System Analytic Calibration activity for Mariner Mars 1971 (MM'71), its objectives for this and future missions, and the support provided to the MM'71 Navigation Team during operations are described. Support functions encompass calibration of tracking data by estimating physical parameters whose uncertainties represent limitations to navigational accuracy, and detailed analysis of the tracking data to uncover and resolve any anomalies. Separate articles treat the activities and results of producing calibrations for the various error sources: Deep Space Station Locations, timing and polar motion, charged particles, and the troposphere. Two other articles are also included discussing the effects of the media error sources on orbit determination and the merits of the smoothing technique used for DRIVID.

Madrid, G. A.↗
NASA NTRS1974

Orbital and entry tracking accessory for globes

An orbital and entry tracking accessory or attachment is described which can be mounted on a globe to provide a rapid means of determining range requirements for entry vehicles returning from any orbit to any desired landing site with reasonable accuracy. The device is constructed of clear plastic strip material, and comprises a support ring, a calibrated orbital track member rigidly carried by the support ring, and a calibrated lateral range member pivotally coupled to the support ring at points such that the lateral range member is always oriented normally to the orbital track member. The assembly is mountable on the globe relatively snugly, but freely movable. At least one of the members has a detachable coupling which permits placement of the device on the globe.

Pritchard, E. B.↗
NASA NTRS1974

Adaptive compensation for an optical tracking telescope

The application of model referenced adaptive control theory to an optical tracking telescope is discussed. The capability of the adaptive technique to compensate for mount irregularities such as inertial variations and bearing friction is demonstrated via field test results on a large tracking telescope. Results are presented which show a 6 to 1 improvement in tracking accuracy for a worst-case satellite trajectory.

Gilbart, J. W.↗
NASA NTRS1974

The ATS-F/Nimbus-F tracking and orbit determination experiment

The experiment described was conducted to demonstrate a procedure for tracking a near-earth satellite via a geostationary satellite without the aid of multiple ground station tracking. Another objective of the experiment was connected with the utilization of the broad tracking coverage provided by the geostationary satellite to obtain an improved geopotential solution. Questions of overall experiment implementation are discussed along with details regarding ground equipment, the ATS-F transponder, and the Nimbus-F transponder. Aspects of measurement evaluation are also examined, taking into account basic measurements, measurement interpretation, and approaches for orbit computation.

Schmid, P. E.↗
NASA NTRS1974

Dual S and Ku-band tracking feed for a TDRS reflector antenna

The results are presented of a trade study designed to identify a synchronous satellite antenna system suitable for receiving and transmitting data from lower orbiting satellites at both S- and K sub u-bands simultaneously as part of the Tracking and Data Relay Satellite System. All related problems associated with maintaining a data link between two satellites with a K sub u-band half-power beamwidth of 0.4 db are considered including data link maintenance techniques, beam pointing accuracies, gimbal and servo errors, solar heating, angle tracking schemes, acquisition problems and aids, tracking accuracies versus SNR, antenna feed designs, equipment designs, weight and power budgets, and detailed candidate antenna system designs.

Pullara, J. C.↗
NASA NTRS1974

Some results of track method of investigating Luna 16 lunar material

Preliminary data from an investigation of tracks in olivine crystals, separated from the five zones of a lunar surface material core, are reported. The gradients of track densities, their lengths, and their angular distribution were measured with an optical microscope. Throughout the core depth (35 cm) crystals bearing traces of exposure to low energy solar cosmic rays were found, indicating the occurrence of mixing processes in the surficial layer of lunar surface material. The age of the occurrence of the samples investigated on the lunar surface, calculated from the track density, is in the interval 0.7 to 16 million years.

Kashkarov, L. L.↗
NASA NTRS1974

Study of sample of Sea of Fertility lunar surface material by the track method

Tracks in crystals of feldspars, olivines, pyroxenes, and in several fragments of basalts from a sample of Luna 16 lunar surface material were studied. A high track density, exceeding 10 to the 8th power cm/2 was found. The tracks were produced mainly by iron group nuclei of cosmic galactic and solar rays.

Poupeau, G.↗
NASA NTRS1975

Simultaneous acquisition of tracking data from two stations

A method and apparatus is described for obtaining simultaneous tracking data from two ground stations relative to a spacecraft, and in particular for obtaining two-way range and Doppler measurements with respect to the spacecraft using only one transponder on the spacecraft. The technique employs simultaneous transmission from two stations to produce a return signal with upper and lower sidebands resulting from the interference of the two transmissions. A transponder transmits the upper and lower sidebands centered about a carrier received by both stations. One station tracks the carrier and the other tracks a sideband aided by the carrier.

Wood, G. E.↗
NASA NTRS1973

Effects of visual flight display dynamics on altitude tracking performance in a flight simulator

The effects were studied of visual display dynamics on pilot tracking performance in a simulator. The tracking task consisted of maintaining the piloted aircraft at the same altitude as two aircraft positioned three-hundred feet ahead; as would be required in level formation flying. The two leading aircraft were represented symbolically along with the horizon on a CRT display. Vertical position of these aircraft with respect to the horizon indicated the altitude of the subject's aircraft, which was disturbed by atmospheric turbulence. Various bandwidths of second-order dynamics were interposed between the true aircraft altitude and the displayed altitude, whereas no dynamics were interposed in the attitude display. Experiments were run using two experienced pilots and two substantially different longitudinal dynamics for the piloted aircraft. Preliminary results indicate a significant decrease in altitude tracking performance for display dynamics with natural frequencies below ten radians per second.

Weener, E. F.↗
NASA NTRS1975

Low cost tracking Navaids error model verification

Features and characteristics of the tracking navaids (Microwave Scanning Beam Landing System, Radar Altimeter, Tacan, rendezvous radar and one way Doppler extracter) were investigated. From the investigation, a set of specifications were developed for building equipment to verify the error model of the tracking navaids. Breadboard verification equipment (BVE) was built for the Microwave Scanning Beam Landing System and the radar altimeter. The breadboard verification equipment generates signals to the tracking navaids which simulate the space shuttles trajectory in the terminal area. The BVE simulates sources of navaids error by generating pseudorandom perturbations on the navaids signals. Differences between the trajectory value and the navaid derived values are taped and form the basis for the navaids error model.

Charych, A.↗
NASA NTRS1974

Space Shuttle tracking and data acquisition system

NASA's plans for the Space Shuttle tracking and data acquisition system are described. The limitations of the techniques now used for tracking and data acquisition support of earth orbiting spacecraft are discussed. NASA's solution to these limitations, the Tracking and Data Relay Satellite System, is described. The system's geometrical coverage and technical characteristics are explained. Operation of the system for Space Shuttle support is described in overview terms.

Robinson, L. M.↗
NASA NTRS1974

Spark chamber track finding program

A spark-chamber track-finding program has been written. The accuracy of the location of the track is good, and if the chamber contains many spurious sparks the computation time is much less than the time used by a least-squares fit routine. Multiple tracks can be found and interaction vertices can thereby be determined.

Arens, J. F.↗
NASA NTRS1975

Applications of satellite-to-satellite tracking to orbit determination and geopotential recovery

Recent simulations have demonstrated the applicability of satellite-to-satellite tracking data to the related problems of orbit determination and geopotential recovery. Specifically, satellite-to-satellite tracking between an earth orbiting satellite and a satellite at geosynchronous altitude (36000 km) produces long continuous data arcs which are not available by means of ground-based tracking. This facility, in conjunction with correct estimation techniques, yields exceptional orbit determination accuracy. The data type also has considerable applicability to geopotential determination when the low satellite has a high inclination.

Argentiero, P.↗