Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Surface condition”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

A finite element analysis of the exact nonlinear formulation of a lifting surface in steady incompressible flow, with the evaluation of the correct wake geometry

The problem of steady incompressible flow for lifting surfaces is considered. An integral equation is solved relating the values of the potential discontinuity on the lifting surface and its wake to the values of the normal derivative of the potential which are known from the boundary conditions. The lifting surface and the wake are divided into small quadrilateral surface elements. The values of the potential discontinuity and the normal derivative of the potential are assumed to be constant within each lifting surface element and equal to their values at the centroids of the lifting surface elements. This yields a set of linear algebraic equations. An iteration procedure is used to obtain the wake geometry: the velocities at the corner points of the wake elements are calculated and the wake streamlines are aligned to be parallel to the velocity vector. The procedure is repeated until convergence is attained.

Suciu, E. O.↗
NASA NTRS2003

Nucleation Behavior of Oxygen-Acetylene Torch-Produced Diamond Films

A mechanism is presented for the nucleation of diamond in the combustion flame environment. A series of six experiments and two associated simulations provide results from which the mechanism was derived. A substantial portion of the prior literature was reviewed and the data and conclusions from the previous experimenters were found to support the proposed mechanism. The nucleation mechanism builds on the work of previous researchers but presents an approach to nucleation in a detail and direction not fully presented heretofore. This work identifies the gas phase as the controlling environment for the initial formation steps leading to nucleation. The developed mechanism explains some of the difficulty which has been found in producing single crystal epitaxial films. An experiment which modified the initial gas phase precursor using methane and carbon monoxide is presented. Addition of methane into the precursor gases was found to be responsible for pillaring of the films. Atomic force microscopy surface roughness data provides a reasonable look at suppression of nucleation by carbon monoxide. Surface finish data was taken on crystals which were open to the nucleation environment and generally parallel to the substrate surface. The test surfaces were measured as an independent measure of the instantaneous nucleation environent. A gas flow and substrate experiment changed the conditions on the surface of the sample by increasing the gas flow rate while remaining on a consistent point of the atomic constituent diagram, and by changing the carbide potential of the substrate. Two tip modification experiments looked at the behavior of gas phase nucleation by modifying the shape and behavior of the flame plasma in which the diamond nucleation is suspected to occur. Diamond nucleation and growth was additionally examined using a high-velocity oxygen fuel gun and C3H6 as the fuel gas phase precursor with addition of carbon monoxide gas 01 addition of liquid toluene.

Roberts, F. E.↗
NASA NTRS2006

Understanding Surface Processes on Mars Through Study of Iron Oxides/Oxyhydroxides: Clues to Surface Alteration and Aqueous Processes

We are performing oxidation and reduction reactions on hydrated ferric oxide minerals in order to investigate how these might alter under a variety of conditions on the surface of Mars. Preliminary experiments on ferrihydrite and goethite showed that heating these minerals in a dry oxidizing environment produces fine-grained hematite, while heating these minerals in a reducing environment produces fine-grained magnetite. Under Mars-like oxidation levels this magnetite then oxidizes to maghemite. These reactions are dependent on the presence of water and organic material that can act as a reductant. We are using reflectance and Mossbauer spectroscopy to characterize the reaction products and TEM to analyze the sample texture. Our preliminary results indicate that magnetite and maghemite could be formed in the soil on Mars from ferrihydrite and goethite if organics were present on early Mars.

Bishop, J. L.↗
NASA NTRS2012

Creation of an Upper Stage Trajectory Capability Boundary to Enable Booster System Trade Space Exploration

The problem of trajectory optimization is important in all space missions. The solution of this problem enables one to specify the optimum thrust steering program which should be followed to achieve a specified mission objective, simultaneously satisfying the constraints.1 It is well known that whether or not the ascent trajectory is optimal can have a significant impact on propellant usage for a given payload, or on payload weight for the same gross vehicle weight.2 Consequently, ascent guidance commands are usually optimized in some fashion. Multi-stage vehicles add complexity to this analysis process as changes in vehicle properties in one stage propagate to the other stages through gear ratios and changes in the optimal trajectory. These effects can cause an increase in analysis time as more variables are added and convergence of the optimizer to system closure requires more analysis iterations. In this paper, an approach to simplifying this multi-stage problem through the creation of an upper stage capability boundary is presented. This work was completed as part of a larger study focused on trade space exploration for the advanced booster system that will eventually form a part of NASA s new Space Launch System.3 The approach developed leverages Design of Experiments and Surrogate Modeling4 techniques to create a predictive model of the SLS upper stage performance. The design of the SLS core stages is considered fixed for the purposes of this study, which results in trajectory parameters such as staging conditions being the only variables relevant to the upper stage. Through the creation of a surrogate model, which takes staging conditions as inputs and predicts the payload mass delivered by the SLS upper stage to a reference orbit as the response, it is possible to identify a "surface" of staging conditions which all satisfy the SLS requirement of placing 130 metric tons into low-Earth orbit (LEO).3 This identified surface represents the 130 metric ton capability boundary for the upper stage, such that if the combined first stage and boosters can achieve any one staging point on that surface, then the design is identified as feasible. With the surrogate model created, design and analysis of advanced booster concepts is streamlined, as optimization of the upper stage trajectory is no longer required in every design loop.

Walsh, Ptrick↗
NASA NTRS1981

Dynamical predictability of monthly means

The concept of predictability which is conditioned by synoptic-scale disturbance instabilities is extended to that of time averages, which are determined by low-frequency planetary wave predictability, in an attempt to determine the theoretical upper limit of dynamical predictability of monthly means for prescribed, nonfluctuating external forcings. Sixty-day integrations of a global general circulation model with nine different initial conditions but identical boundary conditions of sea surface temperatures, snow, sea ice and soil moisture are carried out, where the rms vector wind error between the observed initial conditions is greater than 15 m/sec. It is found that while the variances among the first 30-day means, predicted from mostly different initial conditions, are significantly different from the variances due to random perturbations in the initial conditions, variances for days 31-60 are not so distinguishable. These results suggest that the evolution of long waves remains predictable for between one month and 45 days.

Shukla, J.↗
NASA NTRS1982

Verification and transfer of thermal pollution model. Volume 4: User's manual for three-dimensional rigid-lid model

The theory of a three dimensional (3-D) mathematical thermal discharge model and a related one dimensional (1-D) model are described. Model verification at two sites, a separate user's manual for each model are included. The 3-D model has two forms: free surface and rigid lid. The former allows a free air/water interface and is suited for significant surface wave heights compared to mean water depth, estuaries and coastal regions. The latter is suited for small surface wave heights compared to depth because surface elevation was removed as a parameter. These models allow computation of time dependent velocity and temperature fields for given initial conditions and time-varying boundary conditions. The free surface model also provides surface height variations with time.

Lee, S. S.↗
NASA NTRSDate not supplied

Wildfire Risk Support via Satellite-Derived Vegetation Health and Land Surface Model Soil Moisture

Land Surface Model (LSM) and evaporative demand products provide advanced lead time to wildfire conditions that complement traditional fire indices and represent short-term changes that add context to overall, long-term drought conditions. Established fire indices typically use weather indicators (i.e., precipitation, temperature) and estimated dead fuel moisture to indirectly obtain land surface and sub-surface characterization. The convergence of LSM shallow and deep-layer soil moisture output and satellite-derived vegetation health combine to provide a tool for stakeholders to examine trends in the state of land surface conditions that can help assess wildfire threat. Satellite remote sensing data can constrain near-real time vegetation characteristics within the LSM and/or provide a derived stress index in order to help characterize the wildfire risk. In addition, a percentile product of soil moisture is derived from a comparison of current LSM conditions to the historical record of the LSM in order to put the current conditions in perspective relative to the season and geographic region. The 2015 season as well as the 2018 Camp Fire Complex in California were examined in terms of the changes in LSM soil moisture and vegetation states. Satellite vegetation health consistently showed decreases a month prior to wildfire initiation. Additionally, maximum changes in total column soil moisture corresponded with the greatest concentration of fire locations. While soil moisture deficits occurred in the shallow layers across northern California in 2018, significant deficits at all sub-surface levels were seen ahead of the Camp Fire event. This presentation will demonstrate the complementary value of LSM output and satellite measured vegetation health to diagnose short-term deficits in sub-surface soil moisture and the rapid decline in vegetation health which precedes large wildfire events.

Wildfire↗
NASA NTRS2019

An Approach to Retrieve BRDF from Satellite and Airborne Measurements of Surface-Reflected Radiance Based on Decoupling of Atmospheric Radiative Transfer and Surface Reflection

Bi-directional Reflection Distribution Function (BRDF) defines anisotropy of the surface reflection. It is required to specify the boundary condition for radiative transfer (RT) modeling. Measurements of reflected radiance by satellite- and air-borne sensors provide information about anisotropy of surface reflection. Atmospheric correction needs to be performed to derive BRDF from the reflected radiance. Common approach for BRDF retrievals consists of the use of kernel-based BRDF and RT modeling that needs to be done anew at every step of the iterative process. The kernels’ weights are obtained by minimization of the difference between measured and modeled radiance. This study develops a new method of retrieving kernel-based BRDF that requires RT calculations to be done only once. The method employs the exact analytical expression of radiance at any atmospheric level through the solutions of two auxiliary atmosphere-only RT problems and the surface-reflected radiance at the surface level. The latter is related to BRDF and solutions of the auxiliary RT problems by a Fredholm integral equation of the second kind. The approach requires to perform RT calculations one time before the iterations. It can use observations taken at different atmospheric conditions assuming that surface conditions remain unchanged during the time span of observations. The algorithm accurately catches zero weights of the kernels that may be a concern if the number of kernels is greater than 3 in current mainstream approaches. The study presents numerical tests of the BRDF retrieval algorithm for various surface and atmospheric conditions.

Radkevich, Alexander↗
NASA NTRS1992

Stability correction functions for the mean wind speed and temperature in the unstable surface layer

In accordance with a theoretical analysis by Kader and Yaglom, interpolation expressions are proposed for the Monin-Obukhov functions for the wind speed and temperature profiles under unstable conditions in the surface layer of the atmospheric boundary layer. The values of the parameters are adjusted to agree with earlier work under weak instability, as reviewed by Hogstrom. The resulting formulations are valid for considerably larger values of their argument than those that were hitherto available. Their advantage is that they yield concise and closed-form stability correction functions which can be readily applied in profile analysis and model calculations.

Brutsaert, Wilfried↗
NASA NTRS1975

Evaluation of high pressure water blast with rotating spray bar for removing paint and rubber deposits from airport runways, and review of runway slipperiness problems created by rubber contamination

A high pressure water blast with rotating spray bar treatment for removing paint and rubber deposits from airport runways is studied. The results of the evaluation suggest that the treatment is very effective in removing above surface paint and rubber deposits to the point that pavement skid resistance is restored to trafficked but uncontaminated runway surface skid resistance levels. Aircraft operating problems created by runway slipperiness are reviewed along with an assessment of the contributions that pavement surface treatments, surface weathering, traffic polishing, and rubber deposits make in creating or alleviating runway slipperiness. The results suggest that conventional surface treatments for both portland cement and asphaltic concrete runways are extremely vulnerable to rubber deposit accretions which can produce runway slipperiness conditions for aircraft operations as or more slippery than many snow and ice-covered runway conditions. Pavement grooving surface treatments are shown to be the least vulnerable to rubber deposits accretion and traffic polishing of the surface treatments examined.

Horne, W. B.↗
NASA NTRS2003

Remote Sensing of Liquid Water and Ice Cloud Optical Thickness and Effective Radius in the Arctic: Application of Airborne Multispectral MAS Data

A multispectral scanning spectrometer was used to obtain measurements of the reflection function and brightness temperature of clouds, sea ice, snow, and tundra surfaces at 50 discrete wavelengths between 0.47 and 14.0 microns. These observations were obtained from the NASA ER-2 aircraft as part of the FIRE Arctic Clouds Experiment, conducted over a 1600 x 500 km region of the north slope of Alaska and surrounding Beaufort and Chukchi Seas between 18 May and 6 June 1998. Multispectral images of the reflection function and brightness temperature in 11 distinct bands of the MODIS Airborne Simulator (MAS) were used to derive a confidence in clear sky (or alternatively the probability of cloud), shadow, and heavy aerosol over five different ecosystems. Based on the results of individual tests run as part of the cloud mask, an algorithm was developed to estimate the phase of the clouds (water, ice, or undetermined phase). Finally, the cloud optical thickness and effective radius were derived for both water and ice clouds that were detected during one flight line on 4 June. This analysis shows that the cloud mask developed for operational use on MODIS, and tested using MAS data in Alaska, is quite capable of distinguishing clouds from bright sea ice surfaces during daytime conditions in the high Arctic. Results of individual tests, however, make it difficult to distinguish ice clouds over snow and sea ice surfaces, so additional tests were added to enhance the confidence in the thermodynamic phase of clouds over the Beaufort Sea. The cloud optical thickness and effective radius retrievals used 3 distinct bands of the MAS, with the newly developed 1.62 and 2.13 micron bands being used quite successfully over snow and sea ice surfaces. These results are contrasted with a MODIS-based algorithm that relies on spectral reflectance at 0.87 and 2.13 micron.

King, Michael D.↗
NASA NTRS2018

Introduction to Tools and Techniques for Surface Sampling on Europa

The NASA Jet Propulsion Laboratory (JPL) is studying excavation and collection of a sample from an icy surface for a potential landed mission to Europa. Europa presents unique challenges in planetary sampling. Very little is known about the local topography and material composition of the surface. The environmental conditions of being cryogenically cold (80-130K), low gravity (~1/7th Earth), no atmosphere, low lighting conditions, and limited ground in the loop opportunities have forced JPL to look at sampling differently than past missions. Interacting with the surface of the Jovian moon requires a sampling system that is robust to local topography on the scale of the lander and/or the tool. In addition, the sampling system must be capable both of detecting faults and automatically adjusting to them to achieve the mission objectives without ground in the loop feedback. Presented here is an overview of a sampling system concept that involves a two-stage approach for collecting a sample. The first stage uses an excavation tool to prepare the surface site for sample collection by removing the top layer of irradiated material and clearing tailings from the hole. The second stage then generates and collects a sample for delivery to instruments on-board a lander. Also presented is an introduction for how autonomy and sensing technologies might be employed to enable mission success.

Tevere, Erica L.↗
NASA NTRS1988

Mesoscale monitoring of the soil freeze/thaw boundary from orbital microwave radiometry

The fundamental objectives are to test the feasibility of delineating the lateral boundary between frozen and thawed condition in the surface layer of soil from orbital microwave radiometry and secondly to examine the sensitivity of general circulation models to an explicit parameterization of the boundary condition. Physical models were developed to relate emissivity to scene properties and a simulation package was developed to predict brightness temperature as a function of emissivity and physical temperature in order to address issues of heterogeneity, scaling, and scene dynamics. Radiative transfer models were develped for both bare soil surfaces and those obscured by an intervening layer of vegetation or snow. These models relate the emissivity to the physical properties of the soil and to those of the snow or vegetation cover. A SMMR simulation package was developed to evaluate the adequacy of the emission models and the limiting effects of scaling for realistic scenarios incorporating spatially heterogeneous scenes with dynamic moisture and temperature gradients at the pixel scale.

Ulaby, Fawwaz T.↗
NASA NTRS2019

Long-Duration Venus Lander Development

One of the most intriguing planets in our solar system for both solar system and extra-solar system science is Venus. Venus is the planet most similar to Earth in several key ways and many believe Venus-like planets are more common around other suns than are Earth-like planets. Therefore scientific understanding of our sister planet is a high priority. However, the hostile environmental conditions at the surface coupled with thick acid clouds and dense atmosphere have made understanding this planet very challenging. Remote sensing of surface features and near surface environments is very limited. The hostile environment has also limited the ability of landers to survive, in fact the longest living asset survived just over two hours. Even after over 50 years of attempts to explore Venus, many key measurements, especially near the surface, are still in the future. NASA has begun to undertake steps to overcome the technical challenges and is developing the capability for sustained operations and science return from this important body. For example, recent technology advances in high temperature sensors, electronics, power, and other systems have been funded and this, combined with the new capabilities to replicate Venus conditions on Earth, are changing the outlook for Venus surface exploration.

Kremic, Tibor↗
NASA NTRS2010

How Well Can Infrared Sounders Observe the Atmosphere and Surface Through Clouds?

Infrared sounders, such as the Atmospheric Infrared Sounder (AIRS), the Infrared Atmospheric Sounding Interferometer (IASI), and the Cross-track Infrared sounder (CrIS), have a cloud-impenetrable disadvantage in observing the atmosphere and surface under opaque cloudy conditions. However, recent studies indicate that hyperspectral, infrared sounders have the ability to detect cloud effective-optical and microphysical properties and to penetrate optically thin clouds in observing the atmosphere and surface to a certain degree. We have developed a retrieval scheme dealing with atmospheric conditions with cloud presence. This scheme can be used to analyze the retrieval accuracy of atmospheric and surface parameters under clear and cloudy conditions. In this paper, we present the surface emissivity results derived from IASI global measurements under both clear and cloudy conditions. The accuracy of surface emissivity derived under cloudy conditions is statistically estimated in comparison with those derived under clear sky conditions. The retrieval error caused by the clouds is shown as a function of cloud optical depth, which helps us to understand how well infrared sounders can observe the atmosphere and surface through clouds.

Zhou, Daniel K.↗
NASA NTRS2002

Wind Tunnel Measurements of Shuttle Orbiter Global Heating with Comparisons to Flight

An aerothermodynamic database of global heating images was acquired of the Shuttle Orbiter in the NASA Langley Research Center 20-Inch Mach 6 Air Tunnel. These results were obtained for comparison to the global infrared images of the Orbiter in flight from the infrared sensing aeroheating flight experiment (ISAFE). The most recent ISAFE results from STS-103, consisted of port side images, at hypersonic conditions, of the surface features that result from the strake vortex scrubbing along the side of the vehicle. The wind tunnel results were obtained with the phosphor thermography system, which also provides global information and thus is ideally suited for comparison to the global flight results. The aerothermodynamic database includes both windward and port side heating images of the Orbiter for a range of angles of attack (20 to 40 deg), freestream unit Reynolds number (1 x 10(exp 6))/ft to 8 x 10(exp 6)/ft, body flap deflections (0, 5, and 10 deg), speed brake deflections (0 and 45 deg), as well as with boundary layer trips for forced transition to turbulence heating results. Sample global wind tunnel heat transfer images were extrapolated to flight conditions for comparison to Orbiter flight data. A windward laminar case for an angle of attack of 40 deg was extrapolated to Mach 11.6 flight conditions for comparison to STS-2 flight thermocouple results. A portside wind tunnel image for an angle of attack of 25 deg was extrapolated for Mach 5 flight conditions for comparison to STS-103 global surface temperatures. The comparisons showed excellent qualitative agreement, however the extrapolated wind tunnel results over-predicted the flight surface temperatures on the order of 5% on the windward surface and slightly higher on the portside.

Berry, Scott A.↗
NASA NTRS1987

Electromagnetic scattering by impedance structures

The scattering of electromagnetic waves from impedance structures is investigated, and current work on antenna pattern calculation is presented. A general algorithm for determining radiation patterns from antennas mounted near or on polygonal plates is presented. These plates are assumed to be of a material which satisfies the Leontovich (or surface impedance) boundary condition. Calculated patterns including reflection and diffraction terms are presented for numerious geometries, and refinements are included for antennas mounted directly on impedance surfaces. For the case of a monopole mounted on a surface impedance ground plane, computed patterns are compared with experimental measurements. This work in antenna pattern prediction forms the basis of understanding of the complex scattering mechanisms from impedance surfaces. It provides the foundation for the analysis of backscattering patterns which, in general, are more problematic than calculation of antenna patterns. Further proposed study of related topics, including surface waves, corner diffractions, and multiple diffractions, is outlined.

Balanis, Constantine A.↗
NASA NTRS1990

Development of a defect stream function, law of the wall/wake method for compressible turbulent boundary layers

The method presented is designed to improve the accuracy and computational efficiency of existing numerical methods for the solution of flows with compressible turbulent boundary layers. A compressible defect stream function formulation of the governing equations assuming an arbitrary turbulence model is derived. This formulation is advantageous because it has a constrained zero-order approximation with respect to the wall shear stress and the tangential momentum equation has a first integral. Previous problems with this type of formulation near the wall are eliminated by using empirically based analytic expressions to define the flow near the wall. The van Driest law of the wall for velocity and the modified Crocco temperature-velocity relationship are used. The associated compressible law of the wake is determined and it extends the valid range of the analytical expressions beyond the logarithmic region of the boundary layer. The need for an inner-region eddy viscosity model is completely avoided. The near-wall analytic expressions are patched to numerically computed outer region solutions at a point determined during the computation. A new boundary condition on the normal derivative of the tangential velocity at the surface is presented; this condition replaces the no-slip condition and enables numerical integration to the surface with a relatively coarse grid using only an outer region turbulence model. The method was evaluated for incompressible and compressible equilibrium flows and was implemented into an existing Navier-Stokes code using the assumption of local equilibrium flow with respect to the patching. The method has proven to be accurate and efficient.

Wahls, Richard A.↗