Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Solvent effect”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Cooperative Research and Development Agreement between National Energy Technology Laboratory and University of Kentucky (Abstract)

The National Energy Technology Laboratory (NETL) and University of Kentucky (Participant) will collaborate in the development of “Deep Learning Potential-based Molecular Dynamics Simulation Investigation of Chemical Conversion-Absorption Coupling of CO 2 at Air-Reactive Deep Eutectic Solvent Interface.” This project is supported by DOE-Office of Science Graduate Student Research (SCGSR) program and managed by Oak Ridge Institute for Science and Education (ORISE). Deep eutectic solvents (DESs) are promising alternative sorbents for direct air capture (DAC) CO 2 due to their low vapor pressure, low corrosion, non-toxicity, relatively low cost, and biodegradable nature. Understanding the CO 2 reaction-transport mechanisms at the interface can help develop cost-effective DAC by DESs with high capacity and stability. The collaboration will investigate the absorption and chemical conversion of CO 2 at the air-DES interface to facilitate the development of novel DAC technology using reactive DESs. The anticipated results will make DAC more efficient, allow more sustainable use of our Nation’s fossil energy resources, and advance NETL’s ongoing CO 2 capture efforts.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1990

Synthesis and characterization of polyamide-imides

The synthesis and characterization of polyamide-imides (PAI) derived from four different dianhydrides and three isomers of diaminobenzanilide are discussed with emphasis on the effect of combining an amide linkage in the diamine portion with other bridging groups in the dianhydride portion of the polymer backbone. It is noted that all of the amide-imide polymers exhibit high-glass transition temperatures, high thermooxidative stability, and a relatively good solvent resistance. These aromatic PAIs are characterized by high thermal stability due to chain stiffness, crystallinity, and intermolecular hydrogen bonding, and are considered to be good candidates as high-temperature films, coatings, and fibers for aerospace applications.

Dezern, James F.↗
NASA NTRS2002

Rejuvenation of Spent Media via Supported Emulsion Liquid Membranes

The overall goal of this project is to maximize the reuseability of spent fermentation media. Supported emulsion liquid membrane separation, a highly efficient extraction technique, is used to remove inhibitory byproducts during fermentation; thus, improving the yield while reducing the need for fresh water. The key objectives of this study are: Develop an emulsion liquid membrane system targeting low molecular weight organic acids which has minimal toxicity on a variety of microbial systems; Conduct mass transfer studies to allow proper modeling and design of a supported emulsion liquid membrane system; Investigate the effect of gravity on emulsion coalescence within the membrane unit; Access the effect of water re-use on fermentation yields in a model microbial system; Develop a perfusion-type fermentor utilizing a supported emulsion liquid membrane system to control inhibitory fermentation byproducts; Work for the coming year will focus on the determination of toxicity of various solvents, selection of the emulsifying agents, as well as characterizing the mass transfer of hollow-fiber contactors.

Wiencek, John M.↗
DOE OSTI2023

Engineering Redox Flow Battery Electrodes with Spatially Varying Porosity Using Non‐Solvent‐Induced Phase Separation

Redox flow batteries (RFBs) are a promising electrochemical platform for efficiently and reliably delivering electricity to the grid. Within the RFB, porous carbonaceous electrodes facilitate electrochemical reactions and distribute the flowing electrolyte. Tailoring electrode microstructure and surface area can improve RFB performance, lowering costs. Electrodes with spatially varying porosity may increase electrode utilization and provide surface area in reaction‐limited zones; however, the efficacy of such designs remains an open area of research. Herein, a non‐solvent‐induced phase‐separation (NIPS) technique that enables the reproducible synthesis of macrovoid‐free electrodes with well‐defined across‐thickness porosity gradients is described. The monotonically varying porosity profile is quantified and the physical properties and surface chemistries of porosity‐gradient electrodes are compared with macrovoid‐containing electrode, also synthesized by NIPS. Then, the electrochemical and fluid dynamic performance of the porosity‐gradient electrodes is evaluated, exploring the effect of changing the direction of the porosity gradient and benchmarking against the macrovoid‐containing electrode. Lastly, the performance is examined in a vanadium RFB, finding that the porosity‐gradient electrode outperforms the macrovoid electrode, is independent of gradient direction, and performs favorably compared to advanced electrodes in the contemporary literature. It is anticipated that the approach motivates further exploration of microstructurally tailored electrodes in electrochemical systems.

25 ENERGY STORAGE↗
DOE OSTI2023

Use of FLOSIC for understanding anion-solvent interactions

An Achille’s heel of lower-rung density-functional approximations is that the highest-occupied-molecular-orbital energy levels of anions, known to be stable or metastable in nature, are often found to be positive in the worst case or above the lowest-unoccupied-molecular-orbital levels on neighboring complexes that are not expected to accept charge. A trianionic example, [Cr(C2O4)3]3−, is of interest for constraining models linking Cr isotope ratios in rock samples to oxygen levels in Earth’s atmosphere over geological timescales. Here we describe how crowd sourcing can be used to carry out self-consistent Fermi–Löwdin–Orbital-Self-Interaction corrected calculations (FLOSIC) on this trianion in solution. The calculations give a physically correct description of the electronic structure of the trianion and water. In contrast, uncorrected local density approximation (LDA) calculations result in approximately half of the anion charge being transferred to the water bath due to the effects of self-interaction error. Use of group-theory and the intrinsic sparsity of the theory enables calculations roughly 125 times faster than our initial implementation in the large N limit reached here. By integrating charge density densities and Coulomb potentials over regions of space and analyzing core-level shifts of the Cr and O atoms as a function of position and functional, we unambiguously show that FLOSIC, relative to LDA, reverses incorrect solute-solvent charge transfer in the trianion-water complex. In comparison to other functionals investigated herein, including Hartree–Fock and the local density approximation, the FLOSIC Cr 1s eigenvalues provide the best agreement with experimental core ionization energies.

Chemistry↗
DOE OSTI2024

Plutonium Speciation and Oxidation State Distributions in the Presence of Citrate

We explored the speciation and kinetics of the Pu(VI)-citrate and Pu(III)-citrate systems (pH m = 2.5–11.0, I = 0.1 M NaCl, T = 23 °C, O 2 (g) < 2 ppm) using ultraviolet–visible–near-infrared (UV–vis–NIR) spectrophotometry, solvent extraction, and PHREEQC modeling. Formation constants were determined for PuO 2 (HcitH)(aq) (log K° 1,1 = 1.09 ± 0.05) and PuO 2 (HcitH)(citH) 3– (log K° 1,2 = -0.20 ± 0.07), and evidence for (PuO 2 ) m (citH –k ) n (OH) x 2m(3+k)n–x was identified under alkaline conditions. Pu(VI) species were found to be less stable in the presence of citrate than in the absence of citrate (t ≤ 168 days); the rate of reduction increased with increasing pH. Further, the direct reduction of Pu(VI) to Pu(IV) was required to fit experimental data in the presence of citrate but did not improve the fit for Pu in the absence of citrate. We also observed increased Pu(III) stability in the presence of citrate (t ≤ 293 days), with higher concentrations of Pu(III) favored at lower pH. Finally, we provide evidence of a radiolysis-driven mechanism for the citrate-mediated reduction of plutonium that involves electron transfer from the oxidative breakdown of citrate. Our work highlights the need to investigate the redox effect of organic ligands on plutonium oxidation states under repository-relevant conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

Mechanism of the Comonomer Effect in LLDPE from Ethylene/1-Hexene Using a Quinoline-Amine Hafnium Catalyst

Polymers of ethylene and copolymers of ethylene and 1-hexene are synthesized by utilizing a single-site hafnium catalyst activated with tris(pentafluorophenyl)borane. Polymer production increases sharply as compared to the homopolymerization of ethylene with the addition of just a small amount of 1-hexene-a phenomenon known as the "comonomer effect." A mechanism behind the comonomer effect is proposed where the activation-initiation step plays the key part. When only a small fraction of the precatalyst is initially active, high molecular weight (170 000 g mol -1 , Đ 1.6) polymer chains grow, forming a physical gel structure that traps catalyst, monomer, and solvent molecules, thereby shutting down the reaction-this scenario plays out in the case of homopolymerization of ethylene. 1-Hexene, when present, slows down the chain growth, thereby lowering the molecular weight and preventing the formation of a gel, which in turn allows for more catalytic sites to be initiated; the reaction continues, resulting in a larger amount of polymer of lower molecular weight (25 000 g mol -1 ). The proposed mechanism is validated in a series of experiments where targeted variation of the activation/initiation steps is shown to produce, depending on the condition, either a small amount of high molecular weight physical gel or a large amount of low molecular weight polymer.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Fused filament fabrication of polymer composites for extreme environments

Vast improvements have been made to the capabilities of advanced manufacturing (AM), yet there are still limitations on which materials can effectively be used in the technology. To this end, parts created using AM would benefit from the ability to be developed from feedstock materials incorporating additional functionality. A common three-dimensional (3D) printing polymer, acrylonitrile butadiene styrene, was combined with bismuth and polyvinylidene fluoride via a solvent treatment to fabricate multifunctional composite materials for AM. Composites of varying weight percent loadings were extruded into filaments, which were subsequently 3D printed into blocks via fused filament fabrication. Investigating the material properties demonstrated that in addition to the printed blocks successfully performing as radiation shields, the chemical, thermal, and mechanical properties are suitable for AM. Thus, this work demonstrates that it is possible to enhance AM components with augmented capabilities while not significantly altering the material properties which make AM possible.

36 MATERIALS SCIENCE↗
NASA NTRS1993

Rayleigh rejection filters for 193-nm ArF laser Raman spectroscopy

Selected organic absorbers and their solvents are evaluated as spectral filters for the rejection of 193-nm Rayleigh light associated with the use of an ArF excimer laser for Raman spectroscopy. A simply constructed filter cell filled with 0.5 percent acetone in water and an optical path of 7 mm is shown effectively to eliminate stray Rayleigh light underlying the Raman spectrum from air while transmitting 60 percent of the Raman light scattered by O2.

Mckenzie, Robert L.↗
DOE OSTI2026

pyEF: A Python Framework for QM and QM/MM Atom-Wise Electric Field Analysis

We introduce pyEF, a software package for computing molecular electric fields, electrostatic interaction energies, and electrostatic potentials from quantum mechanical (QM) atom-centered multipole expansions with atom-wise decomposable contributions. We demonstrate the computational efficiency and accuracy of this QM-derived electric field evaluation tool through several tests. To assess the influence of the underlying QM method and charge partitioning scheme on these electrostatic quantities, we analyze over 250 configurations of an acetone solute molecule in five solvents of variable polarity. We find that electric field calculations are highly sensitive to the choice of charge partitioning method. Even among real-space charge schemes, acetone Stark tuning rates differ by up to a factor of 2. Benchmarking computed solvent dipole moments against experimental bulk values, we conclude that the CM5, ADCH, and Hirshfeld-I charge schemes most reliably capture solvent electrostatics and therefore provide a more faithful foundation for computing electric fields. When constructed from these real-space charges, electric fields are nearly insensitive to basis set size and monotonically increase in magnitude with higher Fock exchange. We also demonstrate efficient convergence of QM electrostatics when more distant molecules are represented solely by MM point charges, reducing computational overhead. Leveraging these findings, we demonstrate the use of pyEF to deduce environmental effects on a transition metal complex from a Ga 4 L 6 12– nanocage and quantify the dominant role of organic linkers in orchestrating electrostatic preorganization.

electric fields↗
DOE OSTI2024

CH 3 Radical Generation in Microplasmas for Up-Conversion of Methane

The conversion of methane, CH 4 , into higher value chemicals using low temperature plasmas is challenged by both improving efficiency and selectivity. One path towards selectivity is capturing plasma produced methyl radicals, CH 3 , in a solvent for aqueous processing. Due to the rapid reactions of methyl radicals in the gas phase, the transport distance from production of the CH 3 to its solvation should be short, which then motivates the use of microplasmas. The generation of CH 3 in Ar/CH 4 /H 2 O plasmas produced in nanosecond pulsed dielectric barrier discharge microplasmas is discussed using results from a computational investigation. The microplasma is sustained in the channel of a microfluidic chip in which the solvent flows along one wall or in droplets. CH 3 is primarily produced by electron-impact of and dissociative excitation transfer to CH 4 , as well as CH 2 reacting with CH 4 . CH 3 is rapidly consumed to form C 2 H 6 which, in spite of being subject to these same dissociative processes, accumulates over time, as do other stable products including C 3 H 8 and CH 3 OH. The gas mixture and electrical properties were varied to assess their effects on CH 3 production. CH 3 production is largest with 5% CH 4 in the Ar/CH 4 /H 2 O mixture due to an optimal balance of electron-impact dissociation, which increases with CH 4 percentage, and dissociative excitation transfer and CH 2 reacting with CH 4 , which decrease with CH 4 percentage. Design parameters of the microchannels were also investigated. Increasing the permittivity of the dielectrics in contact with the plasma increased the ionization wave intensity which increased CH 3 production. Increased energy deposition per pulse generally increased CH 3 production as does lengthening pulse length up to a certain point. The arrangement of the solvent flow in the microchannel can also affect the CH 3 density and fluence to the solvent. The fluence of CH 3 to the liquid solvent is increased if the liquid is immersed in the plasma as a droplet or is a layer on the wall where the ionization wave terminates. The solvation dynamics of CH 3 with varying numbers of droplets was also examined. Here, the maximum density of solvated methyl radicals CH 3aq occurs with a large number of droplets in the plasma. However, the solvated CH 3aq density can rapidly decrease due to desolvation, emphasizing the need to quickly react the solvated species in the solvent.

03 NATURAL GAS↗
DOE OSTI2025

Surface engineering of Pt nanocatalysts with transition metal oleates for selective catalysis: a case study on the hydrogenation of α,β-unsaturated aldehydes

Selective and active catalysts enable effective use of feedstocks, reduced energy consumption and waste generation. Tuning the electronic structure of heterogeneous metal nanocatalysts via their surface modifications is a promising strategy to design highly selective and active catalysts for the synthesis of harder to make and more cost-efficient products. Here, we introduce transition metal oleates as a new class of ligands to engineer the catalytically active and very selective surface in organic solvents. Using citral hydrogenation and 5 nm Pt NPs as a model reaction and model catalytic system, respectively, we show that surface engineering of Pt nanocatalysts with metal oleates allows synthesis of desired partially hydrogenated product (geraniol) with ∼90% conversion with selectivity over 93%. We demonstrate that the selective synthesis of the unsaturated alcohols catalyzed by Pt NPs modified by adsorption of the transition metal salts cannot be explained by the widely accepted mechanism of preferred coordination of C$=$O groups by Lewis acids (e.g. partially oxidized transition surface metals). Our results indicate that C$=$O groups prefer to bind to negatively charged surfaces. We propose the explanation on how the adsorption of transition metal oleates can result in the increased electron density at the surface of Pt nanoparticles. Our study not only provides reliable solutions to selective hydrogenation but opens a new possibility of using metal oleates for the electronic ligand effect.

Kwon, Soon Gu [Argonne National Laboratory (ANL), ↗
DOE OSTI2022

Melt-Spun PAN Precursor for Cost-Effective Carbon Fibers in High Pressure Compressed Gas Tankage

The objective of this program was to synthesize melt-spinnable polyacrylonitrile (PAN) precursor that will lead to carbon fiber 25% less expensive than carbon fiber produced from conventional PAN precursor when produced in large volumes. The carbon fiber produced from this precursor needs to achieve ≥ 700 ksi tensile strength with this cost reduction to replace the incumbent fiber. In this program, the technology for producing precursor and then converted carbon fiber (CF) capable of meeting the 700 ksi target was to be demonstrated at a small scale in tows, containing ≥ 100 filaments. If this program moved on to a “Phase 2”, the processes would be scaled up to produce and test Type IV compressed gas storage tanks capable of meeting the 700-bar ultimate targeted FOA performance level. Precursor fiber production typically contributes a large fraction (~50%) to finished CF manufactured cost. Presently, all high strength CFs are manufactured from solution spun PAN precursor, accomplished at low temperatures using large amounts of environmentally unfriendly solvents that impart major impact to line speed and costs involved with handling and reclaiming the solvents and associated “waste streams” required in spinning and extracting those solvents. PAN melt spinning was demonstrated by the company BASF in CF precursor production and used in production of some other acrylic fibers, but significant production challenges remain for meeting the established CF metrics. Melt spinning requires use of plasticizers to suppress the melt temperature of the predominantly PAN formulation to a point sufficiently below the temperature of significant cross-linking. Fortunately, BASF and this team’s earlier work had demonstrated acrylic formulations melt spun with combinations of plasticizing solvents at much lower solvent levels. This project team made significant progress in understanding technical issues and identifying formulation pathways in earlier work in this area where >250ksi strength was achieved. The goal of this program was to pursue a more comprehensive approach with a larger, more diverse team having greater equipment design and overall production capabilities to push rapidly beyond the science to resolve remaining “engineering” issues associated with establishing stable, continuous processes for precursor fiber leading to enhanced, cost-effective CF and composite tank production.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Process strategies for recovery of sugars, lipids, and lignin from oilcane bagasse using natural deep eutectic solvents (NADES)

Sugarcane is being enhanced as a bioenergy crop by engineering it to accumulate and store lipids along with polymeric sugars in vegetative tissues. However, there is no existing process that allows for processing this new crop to recover both lipid and cellulosic sugars from the oilcane bagasse. Therefore, a comprehensive investi- gation of two pretreatment methods—natural deep eutectic solvents (NADES) and chemical-free hydrothermal pretreatment (HT) was conducted to judge their suitability for recovering fermentable sugars, lipids, and lignin from bagasse. Two NADES, i.e., choline chloride: lactic acid (ChCl:LA) and betaine: lactic acid (BT:LA) were prepared using a 1:2 M ratio and were evaluated for pretreatment of oilcane bagasse at 10, 20, and 50 % (w/w) solids, followed by enzymatic hydrolysis at 10 % (w/w) solids. Notably, ChCl:LA NADES treatment at 10 % (w/ w) solids at 140 °C for 2 h, solubilized 78.8 % of lignin and 80.4 % of hemicellulose and allowed 82.7 % enzymatic conversion of glucans to glucose. In contrast, HT pretreatment removed approximately 87.6 % of the hemicellulose and provided an enzymatic glucose yield of 69.7 %. Furthermore, ChCl:LA operated at 50 % solids loading the enriched lipids 2.6-fold (9.2 wt%) in recovered solids compared to HT (6.4 %) and BT:LA (5.1 %) pretreatment processes. NMR-HSQC and GPC analysis showed that ChCl:LA also cleaved the most lignin β–O–4 linkages and demonstrated lower molecular weight compared to HT. As a result, this study demonstrates that NADES pretreatment is an effective green processing method for recovering lipids, sugars, and lignin from bioenergy crops at high solid loading (50 % w/w) within the context of an integrated biorefinery.

09 BIOMASS FUELS↗
DOE OSTI2021

Structure and Dispersion of Free and Grafted Polymer in Nanoparticle Organic Hybrid Materials-Based Solutions by Small-Angle Neutron Scattering

Liquid-like Nanoscale Organic Hybrid Materials or NOHMs consisting of polymer grafted nanoparticles have shown great promise in applications, such as electrochemistry and gas separation, due to their enhanced conductivity, tunability, and negligible vapor pressure. Recently, NOHMs are considered to be used as novel electrolytes in Redox Flow Batteries (RFBs). However, to employ NOHMs in redox flow batteries as electrolytes, it is important to understand the conformation and dispersion of NOHMs in the electrochemical milieu. In this work, we report the use of small-angle neutron scattering to probe the structure and dispersion of Jeffamine M2070 polymer grafted to a SiO 2 nanoparticle in an aqueous solution with and without the presence of a supporting electrolyte. Our results indicate that, in the aqueous environment, there exists a large amount of free polymer in the solution that is not grafted to the functionalized nanoparticles. These protonated free polymers, dispersed in the aqueous solvent, may also strongly interact with the grafted polymer layer and greatly affect the neat structure of NOHMs. Thus, there also exist polymers identified as “interacting” polymers to distinguish them from tethered or truly free polymers in the fluid system. The presence of supporting electrolyte shows a greater effect on the structure of NOHMs-based fluid as it not only alters the structure of the free polymer but also hinders the interaction of the polymer with the functionalized nanoparticles. Moreover, the change in the interaction of the Jeffamine M2070 with the functionalized nanoparticles due to the addition of supporting electrolyte has revealed a drastic change in the viscosities of NOHM solutions. Overall, the dispersion of the free polymer, the interaction of the interacting polymer with grafted polymer, and the change in conformation of free polymer and grafted layers with the addition of supporting electrolyte provide valuable insight into the overall scenario of the electrochemical environment of NOHMs. These results can be applied to fine-tune the structure of liquid-like NOHMs and will aid in a better understanding of their performance as potential electrolytes in RFBs.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Radiation Chemistry Research for Improved Nuclear Fuel Cycles

Nuclear energy is a key component of a global, low-carbon energy future. One of the challenges facing large-scale deployment of nuclear power is the long-term disposition of used nuclear fuel. Due to the political and technical challenges of siting deep geologic storage facilities, reprocessing of used nuclear fuel is desirable to reduce the total volume and decay heat of waste requiring long-term storage, enabling efficient usage of geologic storage repositories. However nuclear fuel reprocessing is complicated by intense multi-component radiation fields that degrade solvent systems that are used for this purpose. Resulting radiolytic degradation can result in reduced performance over time, and generation of additional waste. Thus, an understanding of the radiation-induced chemistry of these reprocessing solvent systems is crucial to for the development of new, radiation-resistant processes for efficiently treating used nuclear fuel. Controlled irradiation experiments combined with high-performance chromatography and mass spectrometry have provided comprehensive knowledge of radiolytic degradation pathways and kinetics, which is needed to predict the effect of radiation-induced chemistry on the performance of the nuclear fuel reprocessing technology. This talk will give an overview of recent progress in research on the radiation chemistry of fuel reprocessing molecules conducted by the Idaho National Laboratory Center for Radiation Chemistry Research (CR2) in conjunction with the Molecular Mass Spectrometry and Chromatography group.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2023

Solvation Effects on the Dielectric Constant of 1 M LiPF6 in Ethylene Carbonate: Ethyl Methyl Carbonate 3:7

We report the dielectric constant of 1 M LiPF 6 in EC:EMC 3:7 w/w (ethylene carbonate/ethyl methyl carbonate) in addition to neat EC:EMC 3:7 w/w. Using three Debye relaxations, the static permittivity value, or dielectric constant, is extrapolated to 18.5, which is compared to 18.7 for the neat solvent mixture. The EC solvent is found to strongly coordinate with the Li + cations of the salt, which results in a loss of dielectric contribution to the electrolyte. However, the small amplitude and large uncertainty in relaxation frequency for EMC cloud definitive identification of the Li + solvation shell. Importantly, the loss of the free EC permittivity contribution due to Li + solvation is almost completely balanced by the positive contribution of the associated LiPF 6 salt, demonstrating that a significant quantity of dipolar ion pairs exists in 1 M LiPF 6 in EC:EMC 3:7.

25 ENERGY STORAGE↗
DOE OSTI2020

A lithium-sulfur battery with a solution-mediated pathway operating under lean electrolyte conditions

Lithium-sulfur (Li-S) battery is one of the most promising candidates for the next generation energy storage systems. However, several barriers, including polysulfide shuttle effect, the slow solid-solid surface reaction pathway in the lower discharge plateau, and corrosion of Li anode still limit its practical applications, especially under the lean electrolyte condition required for high energy density applications. Here, we propose a solution-mediated sulfur reduction pathway to improve the capacity and reversibility of the sulfur cathode and suppress dendrite growth on the Li metal anode simultaneously. With this method, a high coulombic efficiency (99%) and stable cycle life over 100 cycles were achieved under application-relevant conditions (S loading: 6.2 mg cm-2; electrolyte to sulfur ratio: 3 mLE gs-1; sulfur weigh ratio: 72 wt%). This result is enabled by a specially designed Li2S4-rich electrolyte, in which Li2S is formed through a chemical disproportionation reaction instead of electrochemical routes. A diglyme solvent was used to obtain electrolytes with the optimum range of Li2S4 concentration. Operando X-ray absorption spectroscopy confirms the solution pathway in a practical Li-S cell. This solution pathway not only introduces a new electrolyte regime for practical Li-S batteries, but also provides a new perspective for bypassing the inefficient surface pathway for other electrochemical processes.

Wang, Hui↗