Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Single crystal model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Classification of fragile topology enabled by matrix homotopy

Flat bands in twisted materials have attracted considerable attention due to the emergence of correlated phases that can be associated with the non-Wannier-representable nature of its single-particle states. Specifically, these bands can exhibit a class of topology that can be nullified by the addition of trivial bands, termed fragile topology, which has required an expansion of prior classification schemes. However, existing approaches for predicting fragile topology rely on momentum-space methods, e.g., Wilson loops, presenting a fundamental challenge for using fragile topology as a predictor of correlated phases in aperiodic systems, such as incommensurate twist angles in moiré materials. Here, we develop a ℤ 2 energy-resolved topological marker for classifying fragile phases using a system’s position-space description, enabling the direct classification of finite, disordered, and aperiodic materials. By translating the physical symmetries protecting the system’s fragile topological phase into matrix symmetries of the system’s Hamiltonian and position operators, we use matrix homotopy to construct our topological marker while simultaneously yielding a quantitative measure of topological robustness. We demonstrate our framework’s effectiveness in both a low-energy tight-binding model and a continuum photonic crystal model of 𝐶 2 ⁢𝒯-symmetric systems, and find that fragile topology can both persist under strong disorder and even exhibit disorder-induced reentrant phase transitions. Our photonic crystal results also demonstrate the robustness of fragile topology, and the applicability of our approach, to heterostructures lacking a bulk spectral gap. Overall, our framework serves as an efficient tool for elucidating fragile topology, offering guidance for the prediction and discovery of correlated phases in both crystalline and aperiodic materials.

Lee, Ki Young [Sandia National Laboratories (SNL-N↗

Atomic Force Microscopy to Characterize Antimicrobial Peptide-Induced Defects in Model Supported Lipid Bilayers

Antimicrobial peptides (AMPs) interact with bacterial cell membranes through a variety of mechanisms, causing changes extending from nanopore formation to microscale membrane lysis, eventually leading to cell death. Several AMPs also disrupt mammalian cell membranes, despite their significantly different lipid composition and such collateral hemolytic damage hinders the potential therapeutic applicability of the AMP as an anti-microbial. Elucidating the mechanisms underlying the AMP–membrane interactions is challenging due to the variations in the chemical and structural features of the AMPs, the complex compositional variations of cell membranes and the inadequacy of any single experimental technique to comprehensively probe them. (1) Background: Atomic Force Microscopy (AFM) imaging can be used in combination with other techniques to help understand how AMPs alter the orientation and structural organization of the molecules within cell membranes exposed to AMPs. The structure, size, net charge, hydrophobicity and amphipathicity of the AMPs affect how they interact with cell membranes of differing lipid compositions. (2) Methods: Our study examined two different types of AMPs, a 20-amino acid, neutral, α-helical (amphipathic) peptide, alamethicin, and a 13-amino acid, non-α-helical cationic peptide, indolicidin (which intramolecularly folds, creating a hydrophobic core), for their interactions with supported lipid bilayers (SLBs). Robust SLB model membranes on quartz supports, incorporating predominantly anionic lipids representative of bacterial cells, are currently not available and remain to be developed. Therefore, the SLBs of zwitterionic egg phosphatidylcholine (PC), which represents the composition of a mammalian cell membrane, was utilized as the model membrane. This also allows for a comparison with the results obtained from the Quartz Crystal Microbalance with Dissipation (QCM-D) experiments conducted for these peptides interacting with the same zwitterionic SLBs. Further, in the case of alamethicin, because of its neutrality, the lipid charge may be less relevant for understanding its membrane interactions. (3) Results: Using AFM imaging and roughness analysis, we found that alamethicin produced large, unstable defects in the membrane at 5 µM concentrations, and completely removed the bilayer at 10 µM. Indolicidin produced smaller holes in the bilayer at 5 and 10 µM, although they were able to fill in over time. The root-mean-square (RMS) roughness values for the images showed that the surface roughness caused by visible defects peaked after peptide injection and gradually decreased over time. (4) Conclusions: AFM is useful for helping to uncover the dynamic interactions between different AMPs and cell membranes, which can facilitate the selection and design of more efficient AMPs for use in therapeutics and antimicrobial applications.

Swana, Kathleen W.↗

Pattern-matching indexing of Laue and monochromatic serial crystallography data for applications in materials science

Serial crystallography data can be challenging to index, as each frame is processed individually, rather than being processed as a whole like in conventional X-ray single-crystal crystallography. An algorithm has been developed to index still diffraction patterns arising from small-unit-cell samples. The algorithm is based on the matching of reciprocal-lattice vector pairs, as developed for Laue microdiffraction data indexing, combined with three-dimensional pattern matching using a nearest-neighbors approach. As a result, large-bandpass data (e.g. 5–24 keV energy range) and monochromatic data can be processed, the main requirement being prior knowledge of the unit cell. Furthermore, angles calculated in the vicinity of a few theoretical and experimental reciprocal-lattice vectors are compared, and only vectors with the highest number of common angles are selected as candidates to obtain the orientation matrix. Global matching on the entire pattern is then checked. Four indexing options are available, two for the ranking of the theoretical reciprocal-lattice vectors and two for reducing the number of possible candidates. Furthermore, the algorithm has been used to index several data sets collected under different experimental conditions on a series of model samples. Additionally, knowing the crystallographic structure of the sample and using this information to rank the theoretical reflections based on the structure factors helps the indexing of large-bandpass data for the largest-unit-cell samples. For small-bandpass data, shortening the candidate list to determine the orientation matrix should be based on matching pairs of reciprocal-lattice vectors instead of triplet matching.

36 MATERIALS SCIENCE↗

Multiband effects on the upper critical field angular dependence of 122-family iron pnictide superconductors

Detailed measurements of the in-plane resistivity were performed in a high-quality Ba(Fe 1-x Co x ) 2 As 2 (x=0.065) single crystal, in magnetic fields up to 9 T and with different orientations θ relative to the crystal c axis. A significant ρ(T) H,θ rounding is observed just above the superconducting critical temperature T c due to Cooper pairs created by superconducting fluctuations. These data are analyzed in terms of a generalization of the Aslamazov-Larkin approach, that extends its applicability to high reduced-temperatures and magnetic fields. This method allows us to carry out a criterion-independent determination of the angular dependence of the upper critical field, H c2 (θ). In spite of the relatively small anisotropy of this compound, it is found that H c2 (θ) presents a significant deviation from the single-band 3D anisotropic Ginzburg-Landau (3D-aGL) approach, particularly for large θ (typically above ~60o). These results are interpreted in terms of the multiband nature of these materials, in contrast with other proposals for similar H c2 (θ) anomalies. Our results are also consistent with an effective anisotropy factor almost temperature independent near T c , a result that differs from the ones obtained by using a single-band model.

36 MATERIALS SCIENCE↗

Energy landscape in Ni-Co-Cr and related alloys

Among multi-principal element alloys, the NiCoCr middle-entropy alloy has an outstanding combination of strength and ductility at both low and elevated temperatures. Equiatomic NiCoCr is a single-phase alloy with the face centered cubic (fcc) crystal structure. A low stacking fault energy in the fcc matrix is a cause of a relatively low creep in this alloy. The hexagonal close-packed (hcp) structure differs from the fcc by a stacking of atomic layers. The energy difference between the hcp and fcc structures is known to correlate with the stacking fault energy in the fcc phase. We compute formation and relative structural energies versus composition in the Ni-Co-Cr ternary and related quaternary systems, discuss possibilities of compositional adjustments, and compare theoretical predictions with experiment. We acknowledge funding by NASA’s Aeronautics Research Mission Directorate (ARMD) via Transformational Tools and Technologies (TTT) Project.

Multiscale↗

Disorderly Conduct of Benzamide IV: Crystallographic and Computational Analysis of High Entropy Polymorphs of Small Molecules

Benzamide, a simple derivative of benzoic acid and a common intermediate of pharmaceutical compounds, was reported to form two polymorphs in 1832, but the single crystal structure of the more stable form was not solved until 1959. Nearly 50 years later, the second form was characterized by powder diffraction, followed shortly thereafter by characterization of a third form, a polytype of the most thermodynamically stable Form I. These two new forms, Forms II and III, are metastable. Herein, we describe a fourth polymorph, Form IV, discovered by melt crystallization concurrently with its crystallization under confinement at small length scales (<10 nm), where it is stable indefinitely. Form III exists under confinement in larger pores, and melting point data for different pore sizes corroborate the existence of Form IV below 10 nm. Form IV is highly disordered, precluding indexing of powder diffraction data other than hk0 reflections. Nonetheless, a combination of powder X-ray diffraction and computational crystal structure prediction reveals that Form IV contains a 2D motif resembling that of Form II, but with longrange order in the third dimension masked by ubiquitous stacking faults. This approach relies on distilling a large number of candidate structures to a few possible disorder models based on benzamide tetrads that organize in 2D parquet-like tiles, with organization along the third dimension, that can be modeled with various stacking fault configurations having distinct intermolecular interactions and translations in the dimension orthogonal to the tiling planes. These observations reveal a bewildering crystallographic complexity for such a simple molecule. Nonetheless, the approach described herein demonstrates that challenging structures that may be abandoned prematurely because of poor crystallinity, twinning, or disorder can be solved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Measurement of mix at the fuel–ablator interface in indirectly driven capsule implosions on the National Ignition Facility

The interface between the capsule ablator and fuel ice layer is susceptible to hydrodynamic instabilities. The subsequent mixing of hot ablator material into the ice reduces fuel compression at stagnation and is a candidate for reduced capsule performance. The ability to diagnose ice–ablator mix is critical to understanding and improving stability at this interface. Combining the crystal backlighter imager with the single line of sight camera on the National Ignition Facility (NIF) allows direct measurement of ice–ablator mix by providing multiple quasi-monochromatic radiographs of layered capsule implosions per experiment with high spatial (∼12 μm) and temporal (∼35 ps) resolution. The narrow bandwidth of this diagnostic platform allows radiography of the inner edge of the capsule limb close to stagnation without capsule self-emission contaminating the data and removes opacity uncertainties typically associated with the spectral content of the radiograph. Analysis of radiographic data via a parameterized forward-fitting Abel inversion technique provides measurements of the distribution of mix mass inwards from the ice–ablator interface. The sensitivity of this mix measurement technique was demonstrated by applying it to layered experiments in which the stability of the ice–ablator interface was expected to vary significantly. Additional experiments suggest that high-density carbon capsules that employ a buried-layer dopant profile suffer from mixing at the innermost doped–undoped interface. Data from these experiments suggest that opacity models used in hydrodynamic simulations of NIF experiments can potentially over-predict the opacity of doped capsules. LLNL-JRNL-850535-DRAFT.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Structure and identification of the native PLP synthase complex from Methanosarcina acetivorans lysate

Many protein-protein interactions behave differently in biochemically purified forms as compared to their in vivo states. As such, determining native protein structures may elucidate structural states previously unknown for even well-characterized proteins. Here, we apply the bottom-up structural proteomics method, cryoID , toward a model methanogenic archaeon. While they are keystone organisms in the global carbon cycle and active members of the human microbiome, there is a general lack of characterization of methanogen enzyme structure and function. Through the cryoID approach, we successfully reconstructed and identified the native Methanosarcina acetivorans pyridoxal 5′-phosphate (PLP) synthase (PdxS) complex directly from cryogenic electron microscopy (cryo-EM) images of fractionated cellular lysate. We found that the native PdxS complex exists as a homo-dodecamer of PdxS subunits, and the previously proposed supracomplex containing both the synthase (PdxS) and glutaminase (PdxT) was not observed in cellular lysate. Our structure shows that the native PdxS monomer fashions a single 8α/8β TIM-barrel domain, surrounded by seven additional helices to mediate solvent and interface contacts. A density is present at the active site in the cryo-EM map and is interpreted as ribose 5-phosphate. In addition to being the first reconstruction of the PdxS enzyme from a heterogeneous cellular sample, our results reveal a departure from previously published archaeal PdxS crystal structures, lacking the 37-amino-acid insertion present in these prior cases. This study demonstrates the potential of applying the cryoID workflow to capture native structural states at atomic resolution for archaeal systems, for which traditional biochemical sample preparation is nontrivial.

Methanosarcina acetivorans↗

Gapless spinons and a field-induced soliton gap in the hyperhoneycomb Cu oxalate framework compound [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3

Here, we report a detailed study of the specific heat and magnetic susceptibility of single crystals of a spin-liquid candidate: the hyperhoneycomb Cu oxalate framework compound [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 . The specific heat shows no anomaly associated with a magnetic transition at low temperatures down to T ~ 180 mK in zero magnetic field. We observe a large linear-in-T contribution to the specific heat γT, γ = 98 (1) mJ / mol K 2 , at low temperatures, indicative of the presence of fermionic excitations despite the Mott insulating state. The low-T specific heat is strongly suppressed by applied magnetic fields H, which induce an energy gap, Δ(H), in the spin-excitation spectrum. We use the four-component relativistic density-functional theory (DFT) to calculate the magnetic interactions, including the Dzyaloshinskii-Moriya antisymmetric exchange, which causes an effective staggered field acting on one copper sublattice. The magnitude and field dependence of the field-induced gap, Δ (H) ∝ H 2/3 , are accurately predicted by the soliton mass calculated from the sine-Gordon model of weakly coupled antiferromagnetic Heisenberg chains with all parameters determined by our DFT calculations. Thus our experiment and calculations are entirely consistent with a model of [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 in which anisotropic magnetic exchange interactions due to Jahn-Teller distortion cause one copper sublattice to dimerize, leaving a second sublattice of weakly coupled antiferromagnetic chains. We also show that this model quantitatively accounts for the measured temperature-dependent magnetic susceptibility. Thus [(C 2 H 5 ) 3 NH] 2 Cu 2 (C 2 O 4 ) 3 is a canonical example of a one-dimensional spin-1/2 Heisenberg antiferromagnet and not a resonating-valence-bond quantum spin liquid, as previously proposed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Basalt generation at the Apollo 12 site. Part 1: New data, classification, and re-evaluation

New data are reported from five previously unanalyzed Apollo 12 mare basalts that are incorporated into an evaluation of previous petrogenetic models and classification schemes for these basalts. This paper proposes a classification for Apollo 12 mare basalts on the basis of whole-rock Mg# (molar 100*(Mg/(Mg+Fe))) and Rb/Sr ratio (analyzed by isotope dilution), whereby the ilmenite, olivine, and pigeonite basalt groups are readily distinguished from each other. Scrutiny of the Apollo 12 feldspathic 'suite' demonstrates that two of the three basalts previously assigned to this group (12031, 12038, 12072) can be reclassified: 12031 is a plagioclase-rich pigeonite basalt; and 12072 is an olivine basalt. Only basalt 12038 stands out as a unique sample to the Apollo 12 site, but whether this represents a single sample from another flow at the Apollo 12 site or is exotic to this site is equivocal. The question of whether the olivine and pigeonite basalt suites are co-magmatic is addressed by incompatible trace-element chemistry: the trends defined by these two suites when Co/Sm and Sm/Eu ratios are plotted against Rb/Sr ratio demonstrate that these two basaltic types cannot be co-magmatic. Crystal fractionation/accumulation paths have been calculated and show that neither the pigeonite, olivine, or ilmenite basalts are related by this process. Each suite requires a distinct and separate source region. This study also examines sample heterogeneity and the degree to which whole-rock analyses are representative, which is critical when petrogenetic interpretation is undertaken. Sample heterogeneity has been investigated petrographically (inhomogeneous mineral distribution) with consideration of duplicate analyses, and whether a specific sample (using average data) plots consistently upon a fractionation trend when a number of different compostional parameters are considered. Using these criteria, four basalts have been identified where reported analyses are not representative of the whole-rock composition: 12005, an ilmenite basalt; 12006 and 12036, olivine basalts; and 12031 previously classified as a feldspathic basalt, but reclassified as part of the pigeonite suite.

Neal, Clive R.↗

Title Coherent X-ray Studies of Surface Growth and Patterning Processes

X-ray Photon Correlation Spectroscopy (XPCS) is being developed as a tool to study nanoscale dynamics of fluctuations during thin film growth and surface patterning. XPCS examines the evolution of the X-ray scattering speckle pattern in reciprocal space to reveal dynamics information not accessible through any other means. Unlike low-coherence conventional X-ray scattering, which incoherently averages over different regions of a sample, coherent X-ray scattering is sensitive to the detailed structure of a given sample at that moment in time. In thin film growth processes, heterodyning, which occurs due to coherent mixing of two scattered signals, can be used to investigate the relationship between surface growth velocity and defect propagation. And, for polycrystalline thin film growth, the spatial coherence of the X-ray beam can substitute for the missing spatial coherence of the growth process to track layered growth in detail, even in a growth regime in which there are no conventional growth oscillations of the X-ray intensity. This has opened the door for detailed dynamics studies of individual atomic layers during real-world growth and patterning, not just in perfect single-crystal growth cases, which greatly expands the applicability of in-situ X-ray scattering methods. Step-flow dynamics in mounded polycrystalline growth has been studied separately for two thin film organic semiconductors deposited by thermal deposition in a vacuum environment, C60 and diindenoperylene (DIP). Highly oriented polycrystalline thin films are readily obtained in both systems, where mounds are composed of crystalline monolayer-height steps and terraces in a so-called wedding cake morphology. The formation of mounds is understood to be due to significant Ehrlich-Schwoebel step edge barriers that inhibit molecules from hopping down from one layer to the one below. The mounds exhibit local step flow, which can be monitored using coherent X-ray scattering. This is made possible due to heterodyning between scattering from the average mounds and the moving steps, which becomes visible in XPCS analysis. The effect of desorption, i.e. re-evaporation of deposited molecules is found to be important for understanding these processes. The impact of this work is to enable testing of models of step dynamics, the shape of mounds, and merging of mounds to form continuous thin films. Highly ordered polycrystalline thin films deposited on inexpensive substrates have applications in thin film solar cells and other organic electronic devices. In a separate set of experiments, speckle analysis during self-organized ion beam nanopatterning reveals memory stretching back to the beginning of patterning in the early stages and enables measurement of the velocity of self-organized patterns across surfaces providing the possibility of stringent new tests of the theory of pattern formation and motion.

36 MATERIALS SCIENCE↗

Many-body interference in kagome crystals

When electrons in metals act collectively, they enable emergent phenomena and electronic functionalities that transcend the behaviour of individual particles. Coherent collective charge motion has so far been observed primarily in superconductors, in which it arises with the formation of Cooper pairs. Here we report experimental evidence for coherent charge transport in the normal state of the kagome metal CsV 3 Sb 5 , indicative of a distinct collective electronic state. The signature is a set of magnetoresistance oscillations in mesoscopic crystalline pillars under in-plane magnetic fields, with a periodicity determined by the number of magnetic flux quanta h/e threading between adjacent kagome layers—effectively forming an interlayer Aharonov–Bohm interferometer. The cooperative nature of this phenomenon is evidenced by a non-analytic angular dependence characterized by abrupt transitions between discrete oscillation frequencies and its persistence over length scales that exceed the single-particle mean free path. Notably, the oscillation amplitude matches other anomalous electronic responses reported in CsV 3 Sb 5 , pointing to an underlying mechanism that establishes intrinsic coherence. These findings shed new light on the debated nature of correlated order in kagome metals and establish CsV 3 Sb 5 as a platform for realizing long-range coherent charge transport in the absence of superconductivity—opening new directions for coherence in correlated electron systems beyond conventional models.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of gravity-free solidification on microsegregation

Single crystalline germanium has been grown for the first time in space aboard Skylab Mission No. 2. The crystal growth experiment, designed to characterize the influence of gravity-free solidification on microsegregation of a semiconductor material, contained three crystals. One was doped with Ga; the second with Sb; and the third with B. Portions of the germanium crystals were remelted and subsequently resolidified at 5 microns per second under controlled conditions by the gradient freeze technique. Detailed spreading resistance measurements made on the Ga doped Ge crystals indicate that microsegregation in space is reduced by two to five-fold in the bulk and eight-fold near the surface, while macrosegregation in space is reduced by six-fold in the bulk. The effective segregation coefficient for Ga in Ge was analyzed extensively and was found to be larger for space solidification. This has the implication that the solute boundary layer at the growth interface in space is correspondingly thinner. The solidification interface is significantly smoother and is found to be initially convex toward the melt in space. A convective mixing model has been advanced to explain the absence of gravity on convective mixing and solute segregation during solidification.

Yue, J. T.↗

Flux creep in Bi2Sr2CaCu2O8(sub +x) single crystals

The results of a magnetic study on a Bi2Sr2CaCu2O(8+x) single crystal are reported. Low field susceptibility (dc and ac), magnetization cycles and time dependent measurements were performed. With increasing the temperature the irreversible regime of the magnetization cycles is rapidly restricted to low fields, showing that the critical current J(sub c) becomes strongly field dependent well below T(sub c). At 2.4 K the critical current in zero field, determined from the remanent magnetization by using the Bean formula for the critical state, is J(sub c) = 2 10(exp 5) A/sq cm. The temperature dependence of J(sub c) is satisfactorily described by the phenomenological law J(sub c) = J(sub c) (0) (1 - T/T(sub c) (sup n), with n = 8. The time decay of the zero field cooled magnetization and of the remanent magnetization was studied at different temperatures for different magnetic fields. The time decay was found to be logarithmic in both cases, at least at low temperatures. At T = 4.2 K for a field of 10 kOe applied parallel to the c axis, the average pinning energy, determined by using the flux creep model, is U(sub o) = 0.010 eV.

Agostinelli, E.↗

Two-bond 13 C– 13 C spin-coupling constants in saccharides: dependencies on exocyclic hydroxyl group conformation

Seven doubly 13 C-labeled isotopomers of methyl β-D-glucopyranoside, methyl β-D-xylopyranoside, methyl β-D-galactopyranoside, methyl β-D-galactopyranosyl-(1→4)-β-D-glucopyranoside and methyl β-D-galactopyranosyl-(1→4)-β-D-xylopyranoside were prepared, crystallized, and studied by single-crystal X-ray crystallography and solid-state 13 C NMR spectroscopy to determine experimentally the dependence of 2 J C1,C3 values in aldopyranosyl rings on the C1–C2–O2–H torsion angle, θ 2 , involving the C2 carbon of the C1–C2–C3 coupling pathway. Using X-ray crystal structures to determine θ 2 in crystalline samples and by selecting compounds that exhibit a relatively wide range of θ 2 values in the crystalline state, 2 J C1,C3 values measured in crystalline samples were plotted against θ 2 and the resulting plot compared to that obtained from density functional theory (DFT) calculations. For θ 2 values ranging from ~90° to ~240°, very good agreement was observed between the experimental and theoretical plots, providing strong validation of DFT-calculated spin-coupling dependencies on exocyclic C–O bond conformation involving the central carbon of geminal C–C–C coupling pathways. we report that these findings provide new experimental evidence supporting the use of 2 J CCC values as non-conventional spin-coupling constraints in MA'AT conformational modeling of saccharides in solution, and the use of NMR spin-couplings not involving coupled hydroxyl hydrogens as indirect probes of C–O bond conformation. Solvomorphism was observed in crystalline βGal-(1→4)-βGlcOCH 3 wherein the previously-reported methanol solvate form was found to spontaneously convert to a monohydrate upon air-drying, leading to small but discernible conformational changes in, and a new crystalline form of, this disaccharide.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Complex magnetic order in the decorated spin-chain system Rb 2 Mn 3 ( MoO 4 ) 3 ( OH ) 2

The macroscopic magnetic properties and microscopic magnetic structure of Rb 2 Mn 3 (MoO 4 ) 3 (OH) 2 (space group Pn ma) are investigated by magnetization, heat capacity, and single-crystal neutron diffraction measurements. The compound's crystal structure contains bond-alternating [Mn 3 O 11 ] ∞ chains along the b axis, formed by isosceles triangles of Mn ions occupying two crystallographically nonequivalent sites (the Mn1 site on the base and Mn2 site on the vertex). These chains are only weakly linked to each other by nonmagnetic oxyanions. Both superconducting quantum interference device magnetometry and neutron diffraction experiments show two successive magnetic transitions as a function of temperature. On cooling, it transitions from a paramagnetic phase into an incommensurate phase below 4.5 K with a magnetic wave vector near k 1 = ( 0 , 0.46 , 0 ). An additional commensurate antiferromagnetically ordered component arises with k 2 = ( 0, 0, 0), forming a complex magnetic structure below 3.5 K with two different propagation vectors of different stars. On further cooling, the incommensurate wave vector undergoes a lock-in transition below 2.3 K. The experimental results suggest that the magnetic superspace group is Pnma. 1' (0b0) s0ss for the single- k incommensurate phase and is Pn' m a ( 0 b 0 ) 00 s for the two- k magnetic phase. We propose a simplified magnetic structure model taking into account the major ordered contributions, where the commensurate k 2 defines the ordering of the c-axis component of the Mn1 magnetic moment, while the incommensurate k 1 describes the ordering of the ab -plane components of both Mn1 and Mn2 moments into elliptical cycloids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge Transport and Space-Charge Formation in Cd 1 - x Zn x Te 1 - y Se y Radiation Detectors

The electron- and hole-transport properties in cadmium zinc telluride selenide (CZTS) crystals are studied using a laser-induced transient-current technique with pulsed and dc bias. The internal electric field profile and velocity of surface recombination are determined by Monte Carlo simulations of electron and hole transient currents combined with a numerical solution of the drift-diffusion equation coupled with Poisson’s equation. Electron and hole drift mobilities of μe = 830 cm 2 /Vs and μh = 40 cm 2 /Vs, respectively, are determined. We also develop a simple technique for evaluating surface recombination directly from measured current waveforms without the need for numerical simulation. The good quality of the prepared detector at pulsed bias, with electron- and hole-mobility-lifetime products of (μτ)e = 1.9 × 10 -3 cm 2 /V and (μτ)h = 1.4 × 10 -4 cm 2 /V, respectively, are observed. The formation of a positive space charge, originating from hole injection combined with a recombination level, is found. We observe a significant position dependence of the lifetime of electrons and holes in dc bias due to hole injection. The experiment is successfully fitted by a simple model dominated by a single deep recombination level with an energy of E t =E C -0.73eV; concentration of 7.3 × 10 11 cm -3 ; and electron- and hole-capture cross sections of 3.5 × 10 -14 cm 2 and 6.5 × 10 -14 cm 2 , respectively.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of a New Cloud Droplet Activation Parameterization wtih in Situ Data from CRYSTAL-FACE and CSTRIPE

The accuracy of the 2003 prognostic, physically based aerosol activation parameterization of A. Nenes and J. H. Seinfeld (NS) with modification introduced by C. Fountoukis and A. Nenes in 2005 (modified NS) is evaluated against extensive microphysical data sets collected on board the Center for Interdisciplinary Remotely Piloted Aircraft Studies (CIRPAS) Twin Otter aircraft for cumuliform and stratiform clouds of marine and continental origin. The cumuliform cloud data were collected during NASA's Cirrus Regional Study of Tropical Anvils and Cirrus Layers-Florida Area Cirrus Experiment (CRYSTAL-FACE, Key West, Florida, July 2002), while the stratiform cloud data were gathered during Coastal Stratocumulus Imposed Perturbation Experiment (CSTRIPE, Monterey, California, July 2003). In situ data sets of aerosol size distribution, chemical composition, and updraft velocities are used as input for the NS parameterization, and the evaluation is carried out by comparing predicted cloud droplet number concentrations (CDNC) with observations. This is the first known study in which a prognostic cloud droplet activation parameterization has been evaluated against a wide range of observations. On average, predicted droplet concentration in adiabatic regions is within -20% of observations at the base of cumuliform clouds and -30% of observations at different altitudes throughout the stratiform clouds, all within experimental uncertainty. Furthermore, CDNC is well parameterized using either a single mean updraft velocity w or by weighting droplet nucleation rates with a Gaussian probability density function of w. This study suggests that for nonprecipitating warm clouds of variable microphysics, aerosol composition, and size distribution the modified NS parameterization can accurately predict cloud droplet activation and can be successfully implemented for describing the aerosol activation process in global climate models.

Meskhidze, Nicholas↗