Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Scanning electron microscopy”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Liquid crystalline phase synthesis of nanoporous MnO{sub 2} thin film arrays as an electrode material for electrochemical capacitors

Graphical abstract: Three-dimensional (3D) MnO{sub 2} thin film arrays with nanoporous structure is electrodeposited on Ti foil from hexagonal lyotropic liquid crystalline phase. Low-angle X-ray diffraction (XRD), wide-angle XRD, field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) are employed to study the morphology and the structure of the as-synthesized MnO{sub 2} materials. Galvanostatic charge/discharge measurements show the nanoporous, 3D electrode material exhibits excellent capacitive performance between the potential range of −0.1 to 0.9 V, and a maximum specific capacitance as high as 462 F g{sup −1} are achieved in 0.5 M Na{sub 2}SO{sub 4} solution at a charge/discharge current density of 4 A g{sup −1}. Highlights: ► 3D MnO{sub 2} thin film arrays with nanoporous structure is fabricated for the first time. ► A maximum specific capacitance as high as 462 F g{sup −1} is obtained. ► The 3D and nanoporous superarchitecture facilitate electrolyte penetration. -- Abstract: Three-dimensional (3D) MnO{sub 2} thin film arrays with nanoporous structure is electrodeposited on Ti foil from hexagonal lyotropic liquid crystalline phase. Low-angle X-ray diffraction (XRD), wide-angle XRD, field emission scanning electron microscopy (FESEM), and transmission electron microscopy (TEM) are employed to study the morphology and the structure of the as-synthesized MnO{sub 2} materials. Galvanostatic charge/discharge measurements show the nanoporous, 3D electrode material exhibits excellent capacitive performance between the potential range of −0.1 to 0.9 V, and a maximum specific capacitance as high as 462 F g{sup −1} are achieved in 0.5 M Na{sub 2}SO{sub 4} solution at a charge/discharge current density of 4 A g{sup −1}.

36 MATERIALS SCIENCE↗

Identification of microstructural characteristics in lightweight aggregate concretes by micromechanical modelling including the interfacial transition zone (ITZ)

An approach which combines both experimental techniques and micromechanical modelling is developed in order to characterise the elastic behaviour of lightweight aggregate concretes (LWAC). More than three hundred LWAC specimens with various lightweight aggregate types (5) of several volume ratios and three different mortar matrices (normal, HP, VHP) are tested. The modelling is based on iterative homogenisation process and includes the ITZ specificities experimentally observed with scanning electron microscopy (SEM). In agreement with experimental measurements, the effects of mix design parameters as well as of the interfacial transition zone (ITZ) on concrete mechanical performances are quantitatively analysed. Confrontations with experimental results allow identifying the elastic moduli of LWA which are difficult to determine experimentally. Whereas the traditional empirical formulas are not sufficiently precise, predictions of LWAC elastic behaviours computed with the micromechanical models appear in good agreement with experimental measurements.

36 MATERIALS SCIENCE↗

Microstructure Analysis of Bismuth Absorbers for Transition-Edge Sensor X-ray Microcalorimeters

Given its large X-ray stopping power and low specific heat capacity, bismuth (Bi) is a promising absorber material for X-ray microcalorimeters and has been used with transition-edge sensors (TESs) in the past. However, distinct X-ray spectral features have been observed in TESs with Bi absorbers deposited with different techniques. Evaporated Bi absorbers are widely reported to have non-Gaussian low-energy tails, while electroplated ones do not show this feature. In this study, we fabricated Bi absorbers with these two methods and performed microstructure analysis using scanning electron microscopy and X-ray diffraction microscopy. The two types of material showed the same crystallographic structure, but the grain size of the electroplated Bi was about 40 times larger than that of the evaporated Bi. This distinction in grain size is likely to be the cause of their different spectral responses.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

In Situ TEM Investigation of ZnO Nanowires during Sodiation and Lithiation Cycling

The development of sodium-ion batteries has drawn lots of attention recently due to the low-cost and eco-friendly sodium source. However, a fundamental understanding of the sodiation behavior for commonly used electrode materials is still limited. Here, combining in situ transmission electron microscopy, aberration-corrected scanning transmission electron microscopy, and ex situ battery cycling tests, the lithiation and sodiation behavior of ZnO nanowires is investigated. The findings show a direct correlation between the mechanical behavior of the lithiated/sodiated ZnO nanowires and their electrochemical cyclability. The mechanical brittleness of LiZn and the formation of nanocracks lead to the poor cyclability of Li-ion batteries with a ZnO anode. However, the sodiated ZnO nanowires show profuse dislocation plasticity. The observed high-density dislocations offer the sodiated ZnO anode more ductility and subsequently better cyclability than its Li-ion counterpart. The results reveal the importance of understanding the correlation between mechanical properties of battery electrodes and their cycling abilities.

Asayesh-Ardakani, Hasti↗

(Oxy)hydroxides Formed on Aluminum Fuel Materials After Irradiation and Long-Term Wet Storage - 20354

The aluminum cladding of research-reactor fuel experiences general corrosion when in contact with water during in-reactor service and post-discharge wet storage, resulting in the formation of adherent aluminum (oxy)hydroxide films. These (oxy)hydroxides contain chemically-bound water that poses challenges for extended dry storage due to the risk of thermal or radiolytic decomposition releasing free water and/or hydrogen and oxygen gases. This study describes characterization of the (oxy)hydroxides present on several aluminum materials used in reactor operation and subsequently stored wet in the L-Basin storage facility at the Savannah River Site (SRS) for an extended period. Characterization data providing insight into the loading, composition, and morphology of (oxy)hydroxides to be expected on service-exposed aluminum cladding provides valuable benchmarks for designing adequate drying and dry-storage approaches. This work is part of a broader investigation to address knowledge gaps and technical data needs for dry storage of aluminum-clad spent nuclear fuel (ASNF), which included in-lab growth of (oxy)hydroxide films on aluminum alloy substrates to investigate formation behavior, investigation of drying methods to remove existing (oxy)hydroxides from ASNF cladding, and measurement of radiolytic yield of hydrogen from (oxy)hydroxide powders and films. In this study, (oxy)hydroxide films were characterized for three aluminum-alloy materials used in reactors and subsequently stored wet for up to approximately 40 years in L-Basin at SRS: one cropping from a Missouri University Research Reactor (MURR) fuel element (Al-6061 alloy), one cropping from a Universal Sleeve Housing (USH) (Al-6063 alloy), and one Mark-16B fuel assembly (either Al-6061 or Al- 6063). The USH and Mark-16B were used in SRS production reactors. Characterization of the as-received (oxy)hydroxides included scanning electron microscopy (SEM) in both plan-view and cross-section to characterize the (oxy)hydroxide layer's morphology, thickness, and structure. X-ray diffraction (XRD) was used to identify the chemical composition and distinguish between the various aluminum (oxy)hydroxides known to form under reactor and storage conditions. XRD analysis revealed both bayerite (Al(OH)3) and boehmite (AlOOH) on the surface of the MURR and USH samples, as well as bayerite, boehmite, and gibbsite (another Al(OH)3 polymorph) on the surface of the Mark-16B sample. The aluminum trihydroxides, bayerite and gibbsite, are typically associated with corrosion in low-temperature (<80 deg. C) water, while boehmite is expected to form at higher water temperature (>80 deg. C). The presence of bayerite on the USH, which is believed to have operated close to 90 deg. C, suggests that boehmite formed during in-reactor exposure was not protective against further hydroxide growth in low-temperature wet storage. Cross-section scanning electron microscopy (SEM) showed total (oxy)hydroxide layer thicknesses of ∼5- 10 μm for the MURR and ∼5-15 μm for the Mark-16B. The thickness of the USH's (oxy)hydroxide layer was indiscernible by the current mounting and imaging method, despite plan-view SEM and XRD confirming the presence of an (oxy)hydroxide layer. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Flower-like NiO structures: Controlled hydrothermal synthesis and electrochemical characteristic

Graphical abstract: Flower-like porous NiO was obtained via thermal decomposition of the precursor prepared by a hydrothermal process using hexamethylenetetramine and polyethylene glycol as hydrolysis-controlling agent and surfactant, respectively. The morphology and microstructure of as-synthesized NiO were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The results of electrochemical measurements demonstrated that the flower-like porous NiO has high capacity (340 F g{sup −1}) with excellent cycling performance as electrode materials of electrochemical capacitors (ECs), which may be attributed to the unique microstrcture of NiO. Data analyses indicated that NiO with novel porous structure attractive for practical and large-scale applications in electrochemical capacitors. Display Omitted Highlights: ► Synthesis and characterization of NiO with novel porous structure is presented in this work. ► The electrochemical performance of product was examined. ► NiO with excellent performance as electrode materials may be due to the unique microstrcture. ► NiO with novel porous structure attractive for practical with high capacity (340 F g{sup −1}). -- Abstract: Flower-like porous NiO was obtained by thermal decomposition of the precursor prepared by a hydrothermal process with hexamethylenetetramine and polyethylene glycol as hydrolysis-controlling agent and surfactant, respectively. The morphology and microstructure of as-synthesized NiO were characterized by X-ray diffraction (XRD), Brunauer–Emmett–Teller (BET), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The resulting structures of NiO exhibited porous like petal building blocks. The electrochemical measurements’ results demonstrated that flower-like porous NiO has high capacity (340 F g{sup −1}) with excellent cycling performance as electrode materials for electrochemical capacitors, which may be attributed to the unique structure of NiO. The results indicated that NiO with novel porous structure has been attractive for practical and large-scale applications in electrochemical capacitors.

36 MATERIALS SCIENCE↗

Effects of Ag additions on melt-spun RE2Fe14B microstructure and texture

Control of microstructure and texture is of critical importance in forming rare earth (RE)-iron-boron particulate suitable for anisotropic polymer-bonded permanent magnets and anisotropic sintered permanent magnets. In this study, the selected approach to controlling grain size, while maintaining texture, is through stabilization and refinement of directional growth in melt-spun ribbons. Varying concentrations of Ag were added to melt-spun ribbons of composition (Y0.55Nd0.45)2.2Fe14B1.1. Effects on microstructure and texture were observed through scanning electron microscopy (SEM) and x-ray diffraction (XRD). It was determined that Ag stabilized columnar growth (compared to alloys with no Ag added) with additions as small as 0.3 at. %, but the Ag also produced a unique texture in the ribbons. In RE-Fe-B ribbons without Ag, strong <00l> texture is observed at the free surface and a mechanism has been established. In all Ag-containing ribbons, the observed texture is canted to both the c- and a-axes, but the mechanism remains unclear.

36 MATERIALS SCIENCE↗

Cryogenic EBSD reveals structure of directionally solidified ice–polymer composite

Despite considerable research efforts on directionally solidified or freeze-cast materials in recent years, little fundamental knowledge has been gained that links model with experiment. In this contribution, the cryogenic characterization of directionally solidified polymer solutions illustrates, how powerful cryo-scanning electron microscopy combined with electron backscatter diffraction is for the structural characterization of ice–polymer composite materials. Under controlled sublimation, the freeze-cast polymer scaffold structure is revealed and imaged with secondary electrons. Electron backscatter diffraction fabric analysis shows that the ice crystals, which template the polymer scaffold and create the lamellar structure, have a-axes oriented parallel to the direction of solidification and the c-axes perpendicular to it. These results indicate the great potential of both cryo-scanning electron microscopy and cryo-electron backscatter diffraction in gaining fundamental knowledge of structure–property–processing correlations. - Highlights: • Cryo-SEM of freeze-cast polymer solution reveals an ice-templated structure. • Cryo-EBSD reveals the ice crystal a-axis to parallel the solidification direction. • The honeycomb-like polymer phase favors columnar ridges only on one side. • Combining cryo-SEM with EBSD links solidification theory with experiment.

36 MATERIALS SCIENCE↗

Photoelectrochemical Stability and Alteration Products of n-Type Single-Crystal ZnO Photoanodes

The photoelectrochemical stability and surface-alteration characteristics of doped and undoped n-type ZnO single-crystal photoanode electrodes were investigated. The single-crystal ZnO photoanode properties were analyzed using current-voltage measurements plus spectral and time-dependent quantum-yield methods. These measurements revealed a distinct anodic peak and an accompanying cathodic surface degradation process at negative potentials. The features of this peak depended on time and the NaOH concentration in the electrolyte, but were independent of the presence of electrode illumination. Current measurements performed at the peak indicate that charging and discharging effects are apparently taking place at the semiconductor/electrolyte interface. This result is consistent with the significant reactive degradation that takes place on the ZnO single crystal photoanode surface and that ultimately leads to the reduction of the ZnO surface to Zn metal. The resulting Zn-metal reaction products create unusual, dendrite-like, surface alteration structural features that were analyzed using x-ray diffraction, energy-dispersive analysis, and scanning electron microscopy. ZnO doping methods were found to be effective in increasing the n-type character of the crystals. Higher doping levels result in smaller depletion widths and lower quantum yields, since the minority carrier diffusion lengths are very short in these materials.

Paulauskas, I. E.↗

Gelatin/Gelatinized Sago Starch Biomembranes as a Drug Delivery System Using Rubber Latex as Plasticizer

Preparation and properties of gelatin and gelatin/gelatinized sago starch biomembranes as a drug delivery system are presented. Deproteinized natural rubber latex (DNRL) was chosen to blend as a plasticizer in biomembranes due to its elasticity. The opaque biomembranes were formed, and the effect of DNRL amounts (10–50 part per hundred of gelatin; phg) on mechanical properties of biomembranes was investigated. It was discovered that increasing the amounts of DNRL could decrease the brittleness of biomembranes. However, these DNRL blended biomembranes still swelled, dissolved in water, and eroded within 2 h. The 50 phg DNRL was further chosen for biomembrane preparations. Then, the 5–30 phg gelatinized sago starch which was prepared in-house was added. These gelatin/gelatinized sago starch biomembranes were homogenous and opaque. They portrayed good water uptake properties, and the highest values occurred in 20–30 min, then these biomembranes eroded slowly. Increasing the amounts of sago starch in biomembranes raised the water uptake rates but reduced the erosion properties. Biomembranes with and without starch blends showed the same tensile strengths. Their elongations at break increased when the amounts of starch were raised but still were lower than that of gelatin/DNRL biomembranes. The morphology, scanning electron microscopy, atomic force electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimeter, and X-ray diffractometer confirmed the compatibility of ingredients in biomembranes. Lidocaine and its hydrochloride salt were successfully incorporated in these biomembranes with good properties. The drug release and permeation of biomembrane showed good drug controlled release and were able to permeate through the pig skin.

36 MATERIALS SCIENCE↗

Optical properties of transparent glass–ceramics containing lithium–mica nanocrystals: Crystallization effect

Graphical abstract: Optical properties of transparent Li{sub 2}O–MgO–Al{sub 2}O{sub 3}–SiO{sub 2}–F glasses containing lithium–mica nanocrystals are studied and crystallization condition has been evaluated and optimized to produce transparent glass–ceramics. Crystallization temperatures were determined by differential thermal analysis and crystalline phases were identified and quantified by X-ray diffraction. Scanning electron microscopy was used for morphological variations and UV–vis absorption spectroscopy for comparative analysis of transparency. In order to investigate the optical properties of transparent glass–ceramics, optical band gap, Fermi energy level and Urbach energy are calculated. The results of the investigation illustrate that band gap is reduced with increases in crystallization time and temperature. Enhanced orderliness in the arrangement of atoms might be regarded as possible reasons for the above changes. - Highlights: • The optimum temperature and time of crystallization were determined. • Li–mica nanocrystals with size of <30 nm were formed using a two-step heat-treatment. • Optical band gap and Fermi energy of nanocrystalline materials decreased with increasing of crystallization temperature and time. • Urbach band tailing was decreased with increasing of crystallization condition. - Abstract: Optical properties of transparent Li{sub 2}O–MgO–Al{sub 2}O{sub 3}–SiO{sub 2}–F glasses containing lithium–mica nanocrystals were studied. The crystallization condition of these glasses was evaluated and optimized to produce transparent glass–ceramics. Crystallization temperatures were determined by differential thermal analysis and crystalline phases were identified and quantified by X-ray diffraction. Scanning electron microscopy was used to detect morphological changes and UV–vis absorption spectroscopy was used for comparative analysis of transparency. In order to investigate the optical properties of the transparent glass–ceramics, optical band gap, Fermi energy level and Urbach energy were calculated. The results of the investigation illustrate that the band gap is reduced with increases in crystallization time and temperature. Enhanced orderliness in the arrangement of atoms might be regarded as possible reasons for the above changes.

36 MATERIALS SCIENCE↗

Indium-bump-free antimonide superlattice membrane detectors on silicon substrates

We present an approach to realize antimonide superlattices on silicon substrates without using conventional Indium-bump hybridization. In this approach, PIN superlattices are grown on top of a 60 nm Al0.6Ga0.4Sb sacrificial layer on a GaSb host substrate. Following the growth, the individual pixels are transferred using our epitaxial-lift off technique, which consists of a wet-etch to undercut the pixels followed by a dry-stamp process to transfer the pixels to a silicon substrate prepared with a gold layer. Structural and optical characterization of the transferred pixels was done using an optical microscope, scanning electron microscopy, and photoluminescence. The interface between the transferred pixels and the new substrate was abrupt, and no significant degradation in the optical quality was observed. An Indium-bump-free membrane detector was then fabricated using this approach. Spectral response measurements provided a 100% cut-off wavelength of 4.3 μm at 77 K. The performance of the membrane detector was compared to a control detector on the as-grown substrate. The membrane detector was limited by surface leakage current. The proposed approach could pave the way for wafer-level integration of photonic detectors on silicon substrates, which could dramatically reduce the cost of these detectors.

Zamiri, M. (ORCID:000000020042735X)↗

Probing microscopic variations of superconductivity on the surface of Ba(Fe1-xCox)2As2 single crystals

The spatially resolved electrical transport properties have been studied on the surface of optimally-doped superconducting Ba(Fe1-xCox)2As2 single crystal by using a four-probe scanning tunneling microscopy. While some non-uniform contrast appears near the edge of the cleaved crystal, the scanning electron microscopy (SEM) reveals mostly uniform contrast. For the regions that showed uniform SEM contrast, a sharp superconducting transition at TC = 22.1 K has been observed with a transition width TC = 0.2 K. In the non-uniform contrast region, TC is found to vary between 19.6 and 22.2 K with TC from 0.3 to 3.2 K. The wavelength dispersive x-ray spectroscopy reveals that Co concentration remains 7.72% in the uniform region, but changes between 7.38% and 7.62% in the non-uniform region. Thus the variations of superconductivity are associated with local compositional change.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Quantification and Uncertainty in Particle Morphological Analysis

A key part of forensic analysis of interdicted nuclear materials is examining the microstructure of the materials, which are frequently in the form of particulates. We are developing methods for quantifying the morphology of particle sets imaged using scanning electron microscopy. In order to use this data effectively, we need to understand the uncertainties involved in measuring the morphology of particles. This presentation discusses the sources of uncertainty in scanning electron microscopy, and presents the results of an internal user test of the MAMA software package being developed under a DHS Transformational and Applied Research program. The steps required to establish morphological standards similar to NIST standards are discussed.

36 MATERIALS SCIENCE↗

Preparation of grape-like Bi{sub 2}O{sub 3}/Ti photoanode and its visible light activity

Graphical abstract: Compact and grape-like bismuth oxide (Bi{sub 2}O{sub 3}) coated titania (Ti) anode was prepared by oxalic acid (H{sub 2}C{sub 2}O{sub 4}) etching, electrodeposition and calcination in order to explore its photoelectrocatalytic activities. The Bi{sub 2}O{sub 3} coating was demonstrated to be full of pores, and a good combination between Bi{sub 2}O{sub 3} layer and honeycomb-like Ti substrate was observed by scanning electron microscopy. A synergy was found between electrolysis and photocatalysis using the prepared Bi{sub 2}O{sub 3}/Ti anode for photoelectrocatalytic oxidation of azo dye Acid Orange 7 under visible light irradiation (420 nm). Research highlights: {yields} Bi{sub 2}O{sub 3}/Ti anode was prepared by H{sub 2}C{sub 2}O{sub 4} etching, electrodeposition and calcination. {yields} A compact and grape-like Bi{sub 2}O{sub 3} coated Ti anode was obtained. {yields} Bi{sub 2}O{sub 3} coating was full of pores, and have a good combination with Ti substrate. {yields} A synergy was observed in photoelectrocatalytic oxidation under visible light. -- Abstract: Compact and grape-like bismuth oxide (Bi{sub 2}O{sub 3}) coated titania (Ti) anode was prepared by oxalic acid (H{sub 2}C{sub 2}O{sub 4}) etching, electrodeposition and calcination in order to explore its photoelectrocatalytic activities. The Bi{sub 2}O{sub 3} coating was demonstrated to be full of pores, and a good combination between Bi{sub 2}O{sub 3} layer and honeycomb-like Ti substrate was observed by scanning electron microscopy. The characteristic morphology of Bi{sub 2}O{sub 3} coating indicated that the electrode is stable during degradation. The Bi{sub 2}O{sub 3}/Ti electrode was used in oxidative degradation of Acid Orange 7 by electrolysis, photocatalytic oxidation and photoelectrocatalytic oxidation processes. The pseudo-first order kinetics parameter (K{sub app}) of photoelectrocatalytic process was 1.15 times of the sum of electrolysis and photocatalytic oxidation under visible light irradiation at 420 nm. The results indicated that the synergy of electrolysis and photocatalysis lead to an excellent photoelectrocatalytic property of the Bi{sub 2}O{sub 3}/Ti electrode.

36 MATERIALS SCIENCE↗

Synthesis and characterization of aluminium–alumina micro- and nano-composites by spark plasma sintering

Graphical abstract: The evolution of microstructure by varying the particle size of reinforcement in the matrix employing spark plasma sintering has been demonstrated here in Al–Al{sub 2}O{sub 3} system. An emphasis has been laid on varying the reinforcement particle size and evaluating the microstructural morphologies and their implications on mechanical performance of the composites. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) reinforced in aluminium matrix were fabricated by powder metallurgy route using spark plasma sintering technique technique at a temperature of 773 K and pressure of 50 MPa. Another set of specimens having composition 1, 5, 20 vol.% of alumina (average size ∼ 10 μm) had been fabricated to compare the physical as well as mechanical attributes of the microcomposite as well as the nanocomposites. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation measurements. The alumina nanoparticles revealed an interface showing appreciable physical intimacy with the aluminium matrix compared to that of the alumina microparticles. The interfacial integrity in case of nanocomposites is better than in the microcomposite which has been studied using microscopic techniques. Spark plasma sintering imparts enhanced densification as well as matrix-reinforcement proximity which has been corroborated with the experimental results. - Highlights: • The Al–Al{sub 2}O{sub 3} micro- and nano-composites fabricated by spark plasma sintering. • Better matrix-reinforcement integrity in nanocomposites than microcomposites. • Spark plasma sintering method results in higher density and hardness values. • High density and hardness values of nanocomposites than microcomposites. • High dislocation density in spark plasma sintered Al–Al{sub 2}O{sub 3} composites. - Abstract: In the present study, an emphasis has been laid on evaluation of the microstructural morphologies and their implications on mechanical performance of the composites by varying the reinforcement particle size. Nanocomposites of 0.5, 1, 3, 5, 7 volume % alumina (average size < 50 nm) and microcomposites of 1, 5, 20 volume % of alumina (average size ∼ 10 μm) reinforced in aluminium matrix were fabricated by spark plasma sintering technique at a temperature of 773 K and pressure of 50 MPa. These micro- and nano-composites have been characterized using X-ray diffraction, scanning electron microscopy and transmission electron microscopy followed by density, microhardness and nanoindentation hardness measurements. The alumina nanoparticles revealed appreciable physical intimacy with the aluminium matrix than that of alumina microparticles. The highest nanohardness recorded 0.85 GPa and 99% densification for 7 and 1 vol.% Al–Al{sub 2}O{sub 3} nancomposites respectively. Spark plasma sintering imparts enhanced densification and matrix-reinforcement proximity which have been corroborated with the experimental results.

36 MATERIALS SCIENCE↗

Nanoscale piezoresponse studies of ferroelectric domains in epitaxial BiFeO{sub 3} nanostructures.

We report the dependence of the ferroelectric domain configuration and switching behavior on the shape (square versus round) of epitaxial BiFeO{sub 3} (BFO) nanostructures. We fabricated (001) oriented BFO(120 nm)/SrRuO{sub 3}(SRO,125 nm) film layers on (001) SrTiO{sub 3} single crystals by rf magnetron sputter deposition, and patterned them to square (500 x 500 nm{sup 2}) and round (502 nm in diameter) shaped nanostructures by focused ion-beam lithography. The surface morphology and the crystalline structure of the nanostructures were characterized by scanning electron microscopy and x-ray diffraction, respectively, while the domain configuration was investigated using piezoelectric force microscopy. We found that the square-shaped nanostructures exhibit a single variant domain configuration aligned along the [{bar 1}1{bar 1}] direction, whereas the round-shaped nanostructures exhibit seven variants of domain configuration along the [{bar 1}1{bar 1}], [1{bar 1}{bar 1}], [11{bar 1}], [111], [{bar 1}11], [1{bar 1}1], and [{bar 1}{bar 1}1] directions. Moreover, local d{sub 33} piezoelectric coefficient measurements showed hysteresis loops with a strong displacement in the voltage axis (strong imprint) for the square-shaped nanostructures, while the round-shaped ones exhibited more symmetric loops. These findings have critical implications for the development of nanocapacitors for gigabyte to terabyte nonvolatile ferroelectric memories.

36 MATERIALS SCIENCE↗

Growth and characterization of Pt-protected Gd{sub 5}Si{sub 4} thin films

Successful growth and characterization of thin films of giant magnetocaloric Gd{sub 5}(Si{sub x}Ge{sub 1−x}){sub 4} were reported in the literature with limited success. The inherent difficulty in producing this complex material makes it difficult to characterize all the phases present in the thin films of this material. Therefore, thin film of binary compound of Gd{sub 5}Si{sub 4} was deposited by pulsed laser deposition. It was then covered with platinum on the top of the film to protect against any oxidation when the film was exposed to ambient conditions. The average film thickness was measured to be approximately 350 nm using a scanning electron microscopy, and the composition of the film was analyzed using energy dispersive spectroscopy. X-ray diffraction analysis indicates the presence of Gd{sub 5}Si{sub 4} orthorhombic structure along with Gd{sub 5}Si{sub 3} secondary phase. The transition temperature of the film was determined from magnetic moment vs. temperature measurement. The transition temperature was between 320 and 345 K which is close to the transition temperature of the bulk material. Magnetic moment vs. magnetic field measurement confirmed that the film was ferromagnetic below 342 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗