Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STALLING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Velocity Measurements in the Wake of the Swept Wing Flow Test (SWIFT) Model at the National Transonic Facility

Femtosecond laser electronic excitation tagging (FLEET) was applied to obtain flowfield velocity data for the Swept Wing Flow Test (SWiFT) at the NASA Langley Research Center National Transonic Facility (NTF). Despite numerous challenges associated with performing flow velocimetry measurements within a large-scale cryogenic wind tunnel facility, the experimental campaign was conducted under various conditions, including dry air at 320 K, cool nitrogen at 240 K, and Mach numbers of 0.2 and 0.8. FLEET velocimetry measurements were performed in the downstream wake of the SWiFT model, providing a quantitative dataset. This dataset includes one-dimensional velocity profiles and two-dimensional velocity maps acquired at different angles of attack and Reynolds numbers. The two-dimensional single component velocity maps indicate relatively uniform flow across the 120-mm wide wake flow survey suggesting that the main flow features can be represented by single-position linear velocity profiles. The measured instantaneous velocity profiles at variable angles of attack are compared to model lift coefficient information obtained at Mach 0.2. At high Reynolds numbers, a sudden velocity decrease was observed in the FLEET measurements at the same time as stall in lift coefficient was observed. At a low Reynolds number, both the velocity profiles and the lift coefficient show a smoother transition, without a sudden stall. Furthermore, the two-dimensional, one component velocity map reveals a velocity deficit region at Mach 0.8 at various angles of attack. Both single shot and mean velocity measurements were acquired allowing assessment of flowfield fluctuations and measurement precisions. The uncertainties are within 4 m/s in mean measurements based on repeatability data and about 5 m/s in instantaneous single-shot measurements. Measurements are reported with ~4.8 mm spatial resolution with 32-pixel averaging used to reduce measurement errors.

Transonic↗

Quiet airfoils for small and large wind turbines

Thick airfoil families with desirable aerodynamic performance with minimal airfoil induced noise. The airfoil families are suitable for a variety of wind turbine designs and are particularly well-suited for use with horizontal axis wind turbines (HAWTs) with constant or variable speed using pitch and/or stall control. In exemplary embodiments, a first family of three thick airfoils is provided for use with small wind turbines and second family of three thick airfoils is provided for use with very large machines, e.g., an airfoil defined for each of three blade radial stations or blade portions defined along the length of a blade. Each of the families is designed to provide a high maximum lift coefficient or high lift, to exhibit docile stalls, to be relatively insensitive to roughness, and to achieve a low profile drag.

17 WIND ENERGY↗

Neutrino Heating Drives a Supernova (Silent Animation)

When a neutron star forms, compression creates heat that generates neutrinos. When the star’s core collapses, a shock wave propagates around the star but stalls. The neutrinos reenergize a stalled shock wave, and the convection created leads to an asymmetric explosion that shoots elements into the cosmos. The heat content, or entropy, is shown, with greater entropy represented by “warmer” hues. At center is a volume rendering of the developing explosion above the newly formed neutron star (based on a simulation with the CHIMERA code); side images of orthogonal slices through the star reveal additional detail. The movie starts 100 milliseconds after the formation of the neutron star, depicts the shockwave’s bounce and follows astrophysical events up to 432 milliseconds after the bounce.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Production of a Biofuel Intermediate from Biomass Sugars by Clostridium tyrobutyricum

Butyric acid is a valuable chemical that can be fermentatively produced in Clostridium tyrobutyricum and catalytically upgraded to drop in biofuels. Despite considerable study of glucose fermentation in C. tyrobutyricum, information about glucose and xylose co-fermentation to produce butyric acid is limited. In this work, fed-batch fermentations of corn stover hydrolysate at pH 5.0 demonstrated the co-fermentation of glucose and xylose. However, the fermentation stalled at approximately 48 hours after reaching inhibitory levels of butyric acid (18 g/L). When the fermentation pH was increased to 6.0, higher butyric acid titers (50 g/L) were achieved but the fermentation again stalled after 98 hours due to product inhibition. To demonstrate the potential of a continuous co-fermentation process, in situ product recovery via membrane-based liquid-liquid extraction (pertraction) was applied to remove butyric acid. The extracted acids were then recovered from the organic solvent via back extraction into an alkaline solution, producing a high purity product. Results from pertractive fermentations of real corn stover hydrolysate are shown below.

09 BIOMASS FUELS↗

Demonstrating the Safety of Long-Term Dry Storage - 13468

Commercial nuclear plants in the United States were originally designed with the expectation that used nuclear fuel would be moved directly from the reactor pools and transported off site for either reprocessing or direct geologic disposal. However, Federal programs intended to meet this expectation were never able to develop the capability to remove used fuel from reactor sites - and these programs remain stalled to this day. Therefore, in the 1980's, with reactor pools reaching capacity limits, industry began developing dry cask storage technology to provide for additional on-site storage. Use of this technology has expanded significantly since then, and has today become a standard part of plant operations at most US nuclear sites. As this expansion was underway, Federal programs remained stalled, and it became evident that dry cask systems would be in use longer than originally envisioned. In response to this challenge, a strong technical basis supporting the long term dry storage safety has been developed. However, this is not a static situation. The technical basis must be able to address future challenges. Industry is responding to one such challenge - the increasing prevalence of high burnup (HBU) used fuel and the need to provide long term storage assurance for these fuels equivalent to that which has existed for lower burnup fuels over the past 25 years. This response includes a confirmatory demonstration program designed to address the aging characteristics of HBU fuel and set a precedent for a learning approach to aging management that will have broad applicability across the used fuel storage landscape. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Deep Isolation - Innovation for the Storage and Disposal of High-level Waste and Spent Nuclear Fuel - 19367

Deep Isolation, Inc. is a private, Berkeley based company that has brought innovation to nuclear waste disposal. Deep Isolation has developed a disposal technique that adapts mature drilling technology and customizes it for the purpose of providing a safe and secure solution. Though the stalled nuclear waste program in the US has created unwanted burdens and costs, it has also provided object lessons which Deep Isolation has learned from and designed a novel approach. The solution proposed by Deep Isolation combines the best of the geosciences and social sciences to present the US and other countries with an optimized and tailored approach to disposing of a variety of nuclear waste. This system can complement existing potential storage and disposal sites, or in the case of countries with smaller amounts of waste--the national solution. Deep Isolation innovates where others have stalled and offers a means of deep geological disposal that costs less, takes less time to implement, and cuts down and in some cases eliminates the need for transportation of the waste. The technical solution optimized by Deep Isolation uses established directional drilling technology from the oil and gas industry to drill a vertical drill hole thousands of meters deep and then transition to a horizontal drill hole that is thousands of meters in length. The target media is in or below shale formations, which are present at various depths throughout much of the United States and throughout the world. The availability of suitable geology allows for permanent disposal at multiple locations - including existing nuclear sites, without a need to transport the waste to a central repository. This innovative solution not only offers options for commercial used nuclear fuel and defense spent nuclear fuel and high-level waste, but also other nuclear wastes such as those considered by DoE's past deep bore-hole program, i.e. cesium and strontium capsules. Greater-Than-Class-C (GTCC) waste is also an opportunity for Deep Isolation. DoE's preferred alternative for GTCC includes 'land disposal at generic commercial facilities.' Deep Isolation could provide safe, secure, and permanent disposal at a commercial facility. Deep Isolation complements the technical innovation with best practices from the social sciences. In acknowledgement that the past challenges to implement nuclear waste disposal facilities have been primarily due to socio-political failings, we have designed a means to deeply engage with public and stakeholders. Our approach is committed to partnering with communities, local jurisdictions, states, and Tribes to determine a path forward that benefits all involved, that is fully transparent, collaborative and accountable. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Computation of the National Renewable Energy Laboratory Phase-VI Rotor in Pitch Motion during Standstill

Previously, computational fluid dynamics (CFD) computations of dynamic stall on wind turbine blades have been performed for stand still conditions with moderate success by among others the present authors. In the present work, numerical investigations are performed to illustrate the possibilities of state of the art CFD methods for this problem, including the numerical requirements as time-step and grid resolution. Additionally, the effect of different types of modeling is investigated, ranging from fully turbulent Reynolds-averaged Navier-Stokes (RANS), transitional RANS, to transitional delayed detached-eddy simulation computations. The investigation indicates that detailed information and fair agreement with measurements can be obtained.

17 WIND ENERGY↗

Measurements and predictions of wind turbine tower shadow and fairing effects

Downwind two-bladed rotor configurations can have advantages in reducing rotor mass for wind turbines, compared with three-bladed upwind designs. However, the tower shadow adds an aerodynamic complication that can be difficult to quantify and predict. This study presents and analyzes a previously unpublished subset of data collected during an extensive wind tunnel campaign, the Unsteady Aerodynamic Experiment (UAE). At high tip speed ratios, the tower shadow is a dominating contributor to bending moment oscillations but can be mitigated by the use of a tower fairing when such a fairing is aligned with the flow. At lower tip speed ratios where the blades can undergo aerodynamic stall and hysteresis, tower shadow was only a secondary contributor to bending moments and the tower fairing did not significantly impact bending moments. The aeroelastic simulation code called FAST was used to predict the same experimental conditions. In general, simulations reasonably predicted most of the cycle-averaged aspects, but only qualitatively predicted the unsteady variations due to tower shadow. To improve simulation predictions inside the tower wake, it is suggested that future work model the unsteady wake component associated with cylinder shedding and to consider a wake model for tower fairings at various wind incidence angles.

17 WIND ENERGY↗

Dissecting limiting factors of the Protein synthesis Using Recombinant Elements (PURE) system

Reconstituted cell-free protein synthesis systems such as the Protein synthesis Using Recombinant Elements (PURE) system give high-throughput and controlled access to in vitro protein synthesis. Here we show that compared with the commercial S30 crude extract based RTS 100 E. coli HY system, the PURE system has less mRNA degradation and produces up to ~6-fold full-length proteins. However the majority of polypeptides PURE produces are partially translated or inactive since the signal from firefly luciferase (Fluc) translated in PURE is only ~2/3 rd of that measured using the RTS 100 E. coli HY S30 system. Both of the 2 batch systems suffer from low ribosome recycling efficiency when translating proteins from 82 k D to 224 k D . A systematic fed-batch analysis of PURE shows replenishment of 6 small molecule substrates individually or in combination before energy depletion increased Fluc protein yield by ~1.5 to ~2-fold, while creatine phosphate and magnesium have synergistic effects when added to the PURE system. Additionally, while adding EF-P to PURE reduced full-length protein translated, it increased the fraction of functional protein and reduced partially translated protein probably by slowing down the translation process. Finally, ArfA, rather than YaeJ or PrfH, helped reduce ribosome stalling when translating Fluc and improved system productivity in a template-dependent fashion.

59 BASIC BIOLOGICAL SCIENCES↗

A DNN surrogate unsteady aerodynamic model for wind turbine loads calculations

A recurrent deep-neural network (DNN) surrogate model capable of modeling the unsteady aerodynamic response and dynamic stall behavior of wind turbine blades has been developed and validated for use in engineering design codes. The model is trained using a subset of the oscillating airfoil experiments conducted at the Ohio State University wind tunnel. The predictions from our DNN model show excellent agreement with the measured data and, in all cases, a marked improvement over the state-of-the-art unsteady aerodynamic models. The DNN-based unsteady aerodynamics model was integrated with OpenFAST to perform full-turbine load computations for the NREL-5MW rotor. The largest differences are observed for the inboard stations, particularly in the pitching moment response, when using the new surrogate model compared to the other models available in OpenFAST.

17 WIND ENERGY↗

Computational Fluid Dynamics Study of a Cross-Flow Marine Hydrokinetic Turbine and the Combined Influence of Struts and Helical Blades

A computational fluid dynamics study was performed for a cross-flow marine hydrokinetic turbine. The analysis was done in three dimensions and used the unsteady Reynolds-averaged Navier-Stokes solver in the commercial code STAR-CCM+. The base turbine configuration is the RivGen(R) Turbine, designed by the Ocean Renewable Power Company. A convergence and uncertainty analysis was performed for both the spatial and temporal discretization; this was done using the base configuration, which features support struts and helical foils. Both struts and helical blades introduce three-dimensional flow effects, influencing the complex flow phenomenon of dynamic stall. The study compares the relative impact of struts on power performance and blade loading for both helical and straight blades, and found that for this turbine the relative loss in power from struts was lower with helical blades.

CFD↗

The Unsteady Aerodynamics Module For FAST8

The new modularization framework of FAST v.8 (Jonkman 2013) was accompanied by a complete overhaul of the aerodynamics routines. AeroDyn is an aerodynamics module comprised of four submodels: rotor wake/induction, blade airfoil aerodynamics, tower influence on the blade nodes, and tower drag. Throughout the software overhaul, several improvements to the original theoretical treatments were achieved, including more accurate skewed-wake and unsteady airfoil aerodynamics, and the possibility of modeling highly flexible and curved blades. Under asymmetric conditions, such as wind shear, yawed, and tilted flow, the individual blade elements undergo variations in angle of attack that lead to unsteady aerodynamics phenomena, which can no longer be captured through the static airfoil lift and drag look-up tables. This document covers the main theory and the organization of the modularization framework of the new unsteady aerodynamics submodule (UAM)1, which includes unsteady aerodynamics under attached flow conditions and dynamic stall. The UAM can be called by either blade element momentum theory (only interface discussed in this report), or other future wake models (e.g., dynamic blade element momentum theory, or generalized dynamic wake).

17 WIND ENERGY↗

Compressor surge

Steady state characteristics, stalling, and surge in axial flow compressors

STEADY STATE↗

Development and Application of Advanced Measurement Techniques for Characterizing and Controlling Flow Instabilities in Axial Turbomachines

This report summarizes the recent progress in a project aimed at characterizing the flow structure, instabilities, and turbulence in axial compressors, and also on the utilization of casing grooves for delaying the onset of stall without performance degradation at high flow rates. Progress had been hindered by the COVID-19 laboratory closures and restrictions on the number of people that could be present in the laboratory during Fiscal Year 2020. Once the restrictions were lifted, the tasks described in this report were completed.

compressor↗

Understanding and Controlling Hybrid Electric Gas Turbine Engine Transient Dynamics

The electrification of the gas turbine engine is known to increase the flexibility of aircraft architectures by enabling the generation of electrical power to distribute to other electrically based, thrust producing subsystems. It also has potential for direct performance benefits in the gas turbine engine itself, both at steady state and dynamically. Although the design focus of the gas turbine engine performance is primarily at steady state, it is often the instabilities occurring during transients that cause disequilibrium and constrain performance improvements. Instabilities arise due to the disequilibrium of the energy storage mechanisms within the traditional engine system and likewise for the electrified engine system. The primary energy storage mechanisms in the traditional system are the rotational inertia, gas path volumes, the thermal masses that make up the mechanical structure, and now, the electrical power system will provide additional contributions. Understanding the effect each of these energy storage mechanisms has on the others and controlling them appropriately allows for the suppression of state changes within the turbomachinery components to the degree that the components remain near steady state, thus reducing the disequilibrium within the system. The ability to tightly regulate the state changes of turbomachinery components, such as the compressor, minimizes the excursion of the compressor operating point from the operating line (operability), allowing for higher performing, more efficient compressor designs by decreasing the amount of stall margin needed for safe engine power level changes. Preliminary studies with the electrification of the turbine engine have shown that this is possible, and this concept can lead to design trades benefitting engine performance, weight, and volume. This paper explores in detail the energy storage mechanisms and control approaches for coordinating their state changes, and ultimately proposes that a higher performing, more efficient compressor design can result.

transient dynamics↗