Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SORPTION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Assistant template and co-template agents in modeling mesoporous silicas and post-synthesizing organofunctionalizations

Mesoporous SBA-16 silicas were synthesized through a direct methodology using the template (F127) combined with co-templates (ethanol and n-butanol), with tetraethylorthosilicate as the silica source. These ordered mesoporous silica were characterized by elemental analyses, infrared spectroscopy, solid-state nuclear magnetic resonance for {sup 13}C (CP/MAS) and {sup 29}Si (HP/DEC) nuclei, nitrogen sorption/desorption processes, small angle X-ray analyses (SAXS) and transmission electron microscopy (TEM). SAXS and TEM results confirmed the space group Im3m and cubic 3D symmetry, typical for highly ordered SBA-16. The sorption/desorption data for SBA-16 and when functionalized gave type IV isotherms, with hysteresis loop H2. Surface areas of 836; 657 and 618 m{sup 2} g{sup -1} and average pore diameters of 7.99; 8.10 and 9.85 nm, for SBA-16A, SBA-16B and SBA-16C were obtained, respectively. When functionalized the silicas presented a reduction in surface area, pore volume and pore diameter due to the pendant chains that interfere with nitrogen sorption in these measurements. The co-template ethanol favors the ordered mesopores with highest wall thicknesses. - Graphical Abstract: The mesoporous SBA-16 can be synthesized from binary (F127/TEOS) or ternary (F127/alcohol/TEOs) systems to give well-ordered mesoporous silicas. The co-templates ethanol or butanol gave the final material with highest wall thickness, mainly with ethanol. After these syntheses the pores were successfully organofunctionalized to give a good incorporation of the silylating agents. The final silicas presented of well-arranged solid characteristics as expressing by three distinct peaks, as indexed by the corresponding planes. Highlights: Black-Right-Pointing-Pointer Syntheses of mesoporous silicas by using ternary (F127/agent/TEOS) and binary (F127/TEOS) systems. Black-Right-Pointing-Pointer Use of co-templates to synthesize mesoporous silicas with larger wall thicknesses. Black-Right-Pointing-Pointer Immobilization of pendant chains inside the porous silicas. Black-Right-Pointing-Pointer Ordered mesoposous silicas as new materials for possible applications on sorption and delivering drug systems.

36 MATERIALS SCIENCE↗

Selective adsorption in two porous triazolate–oxalate-bridged antiferromagnetic metal-azolate frameworks obtained via in situ decarboxylation of 3-amino-1,2,4-triazole-5-carboxylic acid

Solvothermal reactions of metal salts, 3-amino-1,2,4-triazole-5-carboxylic acid (H{sub 2}atzc) and ammonium oxalate in different temperature produced two metal azolate frameworks, namely, [Cu{sub 3}(atzc){sub 2}(atz)(ox)]·1.5H{sub 2}O (1) and [Co{sub 5}(atz){sub 4}(ox){sub 3}(HCOO){sub 2}]·DMF (2) (H{sub 2}atzc=3-amino-1,2,4-triazole-5-carboxylic acid, Hatz=3-amino-1,2,4-triazole, and ox=oxalate), in which the atzc precusor was in situ decarboxylated. Structural determination reveals that 1 contains [Cu{sub 3}(atzc){sub 2}(atz)]{sup 2−} layers of mixed μ{sub 4}-atzc and μ{sub 3}-atz ligands, which are pillared by ox{sup 2−} groups to form a 3D porous framework. Compound 2 contains 2D layers with basic spindle-shaped decanuclear units, which extended by ox{sup 2−} and formates to form 3D porous framework. Gas adsorption investigation revealed that two kinds of frameworks exhibited selective CO{sub 2} over N{sub 2} sorption. Moreover, activated 2 shows H{sub 2} storage capacity. Additionally, magnetic properties of both the compounds have been investigated. - Graphical abstract: Solvothermal reactions of metal salts, 3-amino-1,2,4-triazole-5-carboxylate and oxalate produced two metal azolate frameworks, which could store gas molecules, especially H{sub 2} due to small pores. in situ decarboxylation of precursor was observed. - Highlights: • Two MAFs were synthesized via in situ decarboxylation of H{sub 2}atzc. • Both activated frameworks exhibited selective CO{sub 2} over N{sub 2} sorption. • Activated 2 could adsorb H{sub 2}, which makes it promising candidates for gas storage.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and properties of silver sulfate complexes derived from dipyridyl methylthio ligands with secondary donor site

Dipyridyl sulphide ligands 4-(pyridin-4-ylmethylthio)pyridine (abbreviated as L1) and 3-(pyridin-4-ylmethylthio)pyridine (abbreviated as L2) have been designed and used as μ-{sub N},{sub N}-bridging linkages to construct coordination polymers with free –S–CH{sub 2}– groups as secondary donor sites. By use solvent control method, coordination polymers ([Ag{sub 3}SO{sub 4}(L1){sub 3}](Cl)·4.5H{sub 2}O){sub ∞}(1), ([Ag{sub 2}SO{sub 4}(L1){sub 2}]·6H{sub 2}O·2CH{sub 3}OH){sub ∞}(2), ([Ag{sub 2}SO{sub 4}(L2){sub 2}]·H{sub 2}O){sub ∞}(3) and ([Ag{sub 4}(SO{sub 4}){sub 2}(L2){sub 4}]·5H{sub 2}O){sub ∞}(4) with different architectures were obtained. Complexes 1, 3 and 4 feature 1D channel with different sizes and structures. Complex 1 exhibits guest exchange by THF and 1,4-dioxane, and Hg{sup 2+} sorption ability from solution due to its relative larger channel and available bonding sites of –S– exposed to the channel region. All complexes have been characterized through single-crystal and powder X-ray diffraction (PXRD), FT-IR spectra, X-ray photoelectron spectroscopy (XPS), elemental and thermogravimetric analyses. The guest exchange and Hg{sup 2+} sorption were monitored and identified, and the structure-property relationship of coordination polymers 1–4 are discussed. - Graphical abstract: Coordination polymers of silver(I) sulfate with secondary donor sites are shown guest exchange property and Hg{sup 2+} absorb ability from solution. This work provides a new method to construct functional materials with potential application. - Highlights: • New example of constructing functional coordination polymer with secondary donor methylthio group. • Guest exchange and interesting Hg(II) absorb ability from solution are investigated. • New method to construct functional materials with potential application.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Cu- and Zr-based metal organic frameworks and their composites with graphene oxide for capture of acid gases at ambient temperature

Highlights: • Incorporation of GO in Cu- and Zr-based MOFs resulted in additional porosity at the interstitial MOF/GO spaces. • The UiO-66-NH{sub 2}/GO composite exhibited enhanced CO{sub 2} capacity at higher pressures. • CO{sub 2}/N{sub 2} selectivity of HKUST-1/GO was higher compared to pure HKUST-1. • The HKUST-1 crystallites in the presence of GO exhibited enhanced H{sub 2}S sorption kinetics. • The UiO-66 based adsorbents were more stable in humidity conditions than the HKUST-1 based ones. - Abstract: Capture of acid gases (CO{sub 2} and H{sub 2}S) by liquid solvent absorption is the common industrial practice, yet capture relying on solid adsorbents is increasingly gaining interest as potential alternative towards less energy-demanding operations. Herein, we developed and examined various metal organic frameworks (MOFs) bearing Cu- and Zr- metal clusters and their composites with graphene oxide (GO), and evaluated their performance for CO{sub 2} and H{sub 2}S adsorption. Specifically, UiO-66, UiO-66-NH{sub 2}, HKUST-1, and their GO composites were grown, subjected to structural, morphological, and textural characterization, and subsequently evaluated for their adsorption capacity and selectivity at ambient temperature. The crystallinity of the parent MOFs was preserved upon in-situ growth of the MOF/GO composites, while incorporation of GO yielded uniformly-shaped and well-dispersed MOF crystals resulting in enhanced sorption kinetics, and increased the pore volume compared to pure MOFs due to additional porosity formed in the interstitial spaces between the MOF crystallites and the GO flakes. To this extent, the interplay between additional porosity and pore functionalities in the competitive CO{sub 2} and N{sub 2} adsorption was investigated. UiO-66-NH{sub 2} exhibited enhanced CO{sub 2} capacity (3.07 mmol/g at 25 °C and 4 bar) and the highest CO{sub 2}/N{sub 2} selectivity (167 at 1 bar) among the tested MOFs, due to the presence of the amine functional groups in the organic linker that enhanced affinity with CO{sub 2}. At increased pressures, the UiO-66-NH{sub 2}/GO composite exhibited higher CO{sub 2} capacity compared to pure UiO-66-NH{sub 2}, which is attributed to activation of the additional porosity between the MOF crystallites and the GO layers. HKUST-1/GO selectivity was also enhanced compared to HKUST-1 in all pressures tested. Under humid environment, the UiO-66 based structures were relatively stable in contrast to the HKUST-1 ones that underwent gradual degradation. These composites offer functionalization tunability due to the presence of both MOF and GO counterparts for targeted gas capture applications.

36 MATERIALS SCIENCE↗

$\mathrm{ATR}$-$\mathrm{FTIR}$ spectroscopy as a probe for metal ion binding onto immobilized ligands

ATR-FTIR spectroscopy is shown to be useful in probing metal ion binding to ligands immobilized on polymer beads. Lu(III) is the metal ion, phosphinic and sulfonic acids are the immobilized ligands, and polystyrene beads crosslinked at low and high levels are the support. Analysis is based on ligand band positions and intensities before and after complexation as a function of time. ATR spectra of the phosphinic acid show two types of binding sites with different accessibilities: surface ligands that bind Lu(III) from solution and interior ligands that gain ions by diffusion from the surface. Initially bound Lu(III) ions are mobile within the solid phase and their movement is accompanied by the breaking of hydrogen bonds among the phosphinic acid ligands to form Lu(III) phosphinate complexes. Competition between hydrogen bonding and bond-making with Lu(III) contributes to slow sorption rates compared to results from the sulfonic acid ligand whose strong acidity and ionizability allows rapid Lu(III) sorption. Comparing ATR spectra of the phosphinic acid bound to lightly- and highly-crosslinked polystyrene shows how the extent of crosslinking affects the transport mechanism.

36 MATERIALS SCIENCE↗

Adsorption properties of carbonized polyacrylonitrile deposited on {gamma}-alumina and silica gel by precipitation polymerization

The precipitation polymerization method was used for the deposition of various contents of polyacrylonitrile on two oxide-type supports ({gamma}-alumina and silica gel). The synthesized materials were characterized by thermal analysis performed in inert and oxidizing atmospheres. The mechanism of polyacrylonitrile decomposition was proposed. In order to gain effective adsorbents of volatile organic compounds the polyacrylonitrile/support composites were carbonized at elevated temperatures. The texture and morphology of the calcined materials were examined by low-temperature sorption of N{sub 2} and scanning electron microscopy, respectively. An influence of thermal treatment conditions and carbonaceous species loading on adsorption capacity of methyl-ethyl ketone vapour was also determined. Attenuated total reflection Fourier transform infrared spectroscopy measurements revealed that the ladder-type polyacrylonitrile species formed above 250 {sup o}C and stable up to about 350-400 {sup o}C are the most effective sites for methyl-ethyl ketone sorption. The carbonaceous species dispersion was found to be an additional factor influencing the adsorption capacity of the carbonized polyacrylonitrile/support composites.

36 MATERIALS SCIENCE↗

Layered inorganic/organic mercaptopropyl pendant chain hybrid for chelating heavy cations

Graphical abstract: Crystalline lamellar silicate RUB-18 was immobilized with mercaptopropyl groups at the surface and then used as support for cadmium and lead removal from aqueous solutions. Highlights: Black-Right-Pointing-Pointer Synthetic methodology requires intercalation. Black-Right-Pointing-Pointer Organofunctionalized ilerite compound as sorbent. Black-Right-Pointing-Pointer Active mercaptopropyl groups remove cations. Black-Right-Pointing-Pointer High maximum sorption capacity for cadmium. -- Abstract: Heavy metal sorbents with uptake capacities for divalent cadmium and lead cation removal from aqueous solutions have been synthesized by grafting mercaptopropyltrimethoxysilane onto the surface of two different precursors obtained from lamellar ilerite, its acidic and the cetyltrimethylammonium exchanged forms. The organofunctionalization was carried out by two different procedures: reflux and solvent evaporation methodologies. Elemental analysis data based on carbon content gave 1.37 and 3.53 mmol of organic pendant groups per gram of hybrid by the reflux method, when starting from acidic ilerite and the surfactant form. X-ray diffraction corroborated the maintenance of the original crystallinity. Infrared spectroscopy and nuclear magnetic resonance for {sup 29}Si and {sup 13}C nuclei are in agreement with the success of the proposed method. The sulfur basic centers attached to the lamellar structure are used to coordinate both cations at the solid/liquid interface. The isotherms were obtained through the batchwise process and the experimental data were adjusted to the Freundlich model. The maximum sorption capacities of 5.55 and 5.12 mmol g{sup -1} for lead and 6.10 and 7.10 mmol g{sup -1} for cadmium were obtained for organofunctionalized ilerite and its surfactant form, synthesized by reflux methodology. This behavior suggested that these hybrids could be employed as promising sorbents with a polluted system.

36 MATERIALS SCIENCE↗

Low-temperature sintering behavior of nanocrystalline indium tin oxide prepared from polymer-containing sols

Highlights: Black-Right-Pointing-Pointer The synthesis of ITO powders and thin films from PVP-containing sols is presented. Black-Right-Pointing-Pointer The nano- and microstructures of ITO are more compact when PVP is used. Black-Right-Pointing-Pointer PVP acts both as a steric stabilizer of the sol and as a pre-sintering agent. Black-Right-Pointing-Pointer The PVP-induced enhanced sintering results in ITO with lower electrical resistance. Black-Right-Pointing-Pointer The surface composition of the ITO films is independent of the initial PVP content. -- Abstract: Indium tin hydroxide (ITH) xerogel powders and thin films with different polyvinylpyrrolidone (PVP) contents (0-22%, w/w) were prepared by a classical sol-gel method. To obtain nanocrystalline indium tin oxide (ITO), the ITH xerogels were calcined at 550 Degree-Sign C. The effect of the initial polymer content on the structure of the ITO powders was studied by means of N{sub 2}-sorption measurements, small-angle X-ray scattering (SAXS), transmission and scanning electron microscopy. The N{sub 2}-sorption measurements revealed that the ITO powders obtained contained micropores and both their porosity and specific surface area decreased with increasing PVP content of the ITH xerogels. The SAXS measurements confirmed the enhanced sintering of the particles in the presence of PVP. The calculated mass fractal dimensions of the ITO powders increased significantly, indicating a significant compaction in structure. The pre-sintered structure could be achieved at relatively low temperature, which induced a significant decreasing (three orders of magnitude) in the electrical resistance of the ITO films.

36 MATERIALS SCIENCE↗

Nanoscale carbon materials from hydrocarbons pyrolysis: Structure, chemical behavior, utilisation for non-aqueous supercapacitors

Highlights: • N-doped and regular carbon nanomaterials were obtained by pyrolitic technique. • Dynamic vapor sorption of different solvents reveals smaller S{sub BET} values. • Steric hindrance and specific chemical interactions are the reasons for this. • Nitrogen doping leads to raise of capacitance and coulombic efficiency with non-aqueous N-containing electrolyte. - Abstract: This work systematically studies adsorption properties of carbon nanomaterials that are synthesized through hydrocarbons that is a powerful technique to fabricate different kinds of carbon materials, e.g., nanotubes, nanoshells, onions, including nitrogen substituted. The adsorption properties of the as-synthesized carbons are achieved by low temperature nitrogen adsorption and organic vapors sorption. Heptane, acetonitrile, water, ethanol, benzene and 1-methylimidazole, which are of great importance for development of supercapacitors, are used as substrates. It is discovered that while nitrogen adsorption reveals a high specific surface area, this parameter for most of organic compounds is rather small depending not only on the size of its molecule but also on chemical interactions for a pair adsorbent–adsorbate. The experimental values of heat of adsorption for carbon and N-substituted structures, when Coulomb cross-coupling of nitrogen atoms in adsorbent and adsorbate takes place, confirms this supposition.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Plasticization behavior in polymers of intrinsic microporosity (PIM-1): A simulation study from combined Monte Carlo and molecular dynamics

Microporous glassy polymers currently in use for gas capture and separations can undergo plasticization and swelling through a high uptake of adsorbates. In this paper, we evaluated their effects on the structural and adsorption properties of a polymer of intrinsic microporosity (PIM-1) through atomistic molecular simulations. The sorption-relaxation behavior in PIM-1 induced by CO 2 , CH 4 , H 2 , N 2 , and O 2 gases and binary mixtures have been studied using a combined approach of Monte Carlo and molecular dynamics. Through accounting for polymer relaxation, we showed that structural properties were significantly altered, especially by CO 2 and CH 4 . For adsorption properties, significant differences in loading and configuration of gases in PIM-1 were observed when comparing between fixed and flexible frameworks. Our MC/MD simulations revealed a threshold value around 3 mmol/g at 300 K at which gas loading initiate plasticization and swelling within the polymer matrix. Furthermore, working capacity and regenerability were improved upon sorption-relaxation in several cases indicating that the phenomena do not always correlate with a reduction in performance as usually assumed in the literature.

36 MATERIALS SCIENCE↗

Zeolite-like MOF nanocrystals incorporated 6FDA-polyimide mixed-matrix membranes for CO 2 /CH 4 separation

MOF mixed-matrix membranes (MMMs) are regarded as potential candidates for energy-efficient natural gas purification. Our work reports the fabrication of high-performance 6FDA-polyimide MMMs, based on the incorporation of zeolite-like MOF (ZMOF) as fillers, and their associated permeation studies for CO 2 /CH 4 separation. To eliminate micron-sized crystals, a facile repeating sedimentation approach was used to harvest nanocrystals from the as-synthesized bulk ZMOF crystalline powder material. This enables the deployment of ZMOF nanocrystals with relatively uniform dimension and morphology in the polymer matrix. Typical 6FDA-polyimides encompassing distinct diamine moieties (6FDA-DAM, 6FDA-DETDA-DABA or PDMC) were explored as polymer matrices to disclose the transport property matching the hosted ZMOF filler. Mixed-gas permeation measurements revealed that the incorporation of the ZMOF filler affords a concurrent enhancement of the CO 2 permeability and the CO 2 /CH 4 selectivity for the three tested 6FDA-polyimides. Particularly, the highly permeable 6FDA-DAM showed a considerably enhanced performance for CO 2 /CH 4 that transcends the 2008 Robeson upper-bound. Detailed analysis of the sorption data and diffusion coefficients suggest that the enhanced transport property in the ZMOF-based MMM is plausibly attributed to the combination of the higher CO 2 sorption capacity and selectivity, and favorable gas diffusivity via the CO 2 -philic framework of ZMOF in moderately confined pores.

36 MATERIALS SCIENCE↗

Boric acid removal with polyol-functionalized polyether membranes

Poor selectivity of conventional desalination membranes for boron often necessitates multi-stage treatment trains to achieve desired boron removal for end uses such as irrigation. One approach to membrane design for improved single-pass boric acid removal is via incorporation of chelating ligands that selectively sorb boron. In this study, membranes based on epoxy-amine cross-linked poly(glycidyl glycidyl ether) (PGGE) were synthesized and functionalized with N-methyl-d-glucamine (NMDG), a polyol known to interact selectively with boron. PGGE and PGGE-NMDG membranes exhibited boron sorption isotherms that were well-described by dual mode isotherms. PGGE-NMDG sorbed 2.5 mmol B/g dry polymer from a neutral aqueous solution containing 100 mmol B/L, which was almost three times the adsorption density of a commercial boron selective resin, Amberlite IRA743. Further, the membranes were regenerated in acid without a significant loss of boron sorption capacity over four cycles. Interactions between boron and NMDG and PGGE sites (e.g., epoxides) impacted boron diffusion in both membranes. The use of ligand functionalized membranes to capture target solutes such as boron requires high loading of interacting sites to maximize uptake capacity. Establishing fundamental structure/property rules for boron selectivity could lead to new material designs with improved boron separation properties for water purification.

36 MATERIALS SCIENCE↗

Impact of humidity on gas transport in polybenzimidazole membranes

Polybenzimidazoles (PBIs) are promising materials for high temperature H 2 /CO 2 separation in applications such as steam reforming and pre-combustion carbon capture where significant amounts of water are often present. However, PBIs are hydrophilic, and the impact of humidity on PBI gas separation properties is relatively unexplored. Furthermore, opportunity exists to elucidate the interplay between plasticization, free volume, and gas transport in glassy polymer membranes such as PBIs. Here, this study investigates the effect of humidity on H 2 , O 2 , and CO 2 permeabilities at 35 °C in a commercial PBI and two sulfone-containing PBIs. Water uptake significantly reduces PBI gas permeabilities at low humidities due to competitive sorption and antiplasticization. At high humidities, plasticization increases the permeabilities of larger gases in more hydrophilic PBIs. Effective fractional free volumes evaluated from gas permeation data and previously reported water sorption and dilation data suggest water plasticizes PBIs by increasing accessible free volume via enhanced molecular dynamics rather than by creating new free volume cavities.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Salt and ion transport in a series of crosslinked AMPS/PEGDA hydrogel membranes

Salt permeability and ionic conductivity are critical properties for membranes in water purification and energy applications. Both properties depend on individual ion sorption and diffusion coefficients, which are significantly influenced by polymer chemical and physical parameters such as fixed charge concentration and membrane water content. However, systematic studies connecting polymer structure to ion transport properties are still lacking. In this study, a series of uncharged and charged membranes were synthesized using poly(ethylene glycol) diacrylate (PEGDA) as a cross-linker and 2-acrylamido-2-methyl-1-propanesulfonic acid (AMPS) as a charged monomer. Membrane fixed charge concentration and water uptake were systematically varied by adjusting AMPS content in the pre-polymerization mixture. Salt sorption and permeability coefficients and ionic conductivity of these membranes were measured as a function of NaCl solution concentration (0.01–1 M). Combining the solution-diffusion model and Nernst-Planck equation, individual ion diffusion coefficients were calculated. Experimental Na + diffusion coefficients for all materials were well described by the Mackie and Meares tortuosity model, highlighting the strong influence of water content on ion diffusivity in both uncharged and charged polymers. Model predictions for Cl – diffusion coefficients agree reasonably well with experimental values, with some deviations occurring in more highly charged membranes. Finally, this discrepancy might result from interactions not captured by the Mackie and Meares model (e.g., fixed charge-ion interactions).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ultra-fast and sensitive magneto-optical hydrogen sensors using a magnetic nano-cap array

Magnetism in curved nano-geometries has opened a new path to design novel characteristics and phenomena that could greatly impact the future fundamental and applied studies of materials. Here, in this report, a hexagonally-packed array of magnetic nano-caps (or nano-patches, NP) exhibiting unique magnetic anisotropy and optimal nanostructure for fast hydrogen kinetics is explored as a sensing element for the spark-free magnetic-circular-dichroism (MCD) H 2 sensor. The MCD H 2 sensor outperforms the state-of-the-art optical sensors reported to date and satisfies the most challenging performance targets imposed by US Department of Energy. In particular, a Pd 67 Co 33 NP sensor exhibits response time of t 90 < 0.9 s, recovery time of t 10 < 9.0 s over the 1-100 mbar H 2 partial pressure range, and limit of detection (LOD) of ~1 ppm. The LOD improves to <700 ppb, when the signal-to-noise ratio is enhanced by stacking three NP arrays. Using a 30-nm TAF (Teflon AF 2400) polymer coating, the sorption kinetics of the Pd 67 Co 33 /TAF sensor are significantly accelerated, with t 90 < 0.4 s and t 10 < 2.8 s over the same pressure range. When the Pd 67 Co 33 /TAF sensor is further coated with a 100-nm poly(methyl methacrylate) (PMMA) layer, a rapid sorption time of t 90 < 0.5 s, LOD < 1 ppm and excellent sensor accuracy (<2.5% full scale) are maintained, while the sensor obtains strong selectivity against interference gases and moisture and a negligible aging effect. The MCD nano-cap sensor platform may have a great impact on the future deployment of H 2 fuel, H 2 environmental monitoring sensors, and fast proton-based magneto-ionic devices.

Fast and sensitive hydrogen sensors↗

Understanding the impact of SPMAK and PEGPEA in crosslinked PEGDA membranes: Methanol-carboxylate co-transport behavior and correlating structure-physicochemical-transport properties

Investigating multicomponent transport in dense, hydrated polymer membranes is necessary in applications such as fuel cells, electrolyzers, and desalination systems. Of particular interest are photoelectrochemical CO 2 reduction cells (PEC-CRC) which produce liquid products such as alcohols (methanol) and carboxylates (formate, acetate). Flux coupling and competitive sorption behavior of these products (solutes) have been found to affect permselectivity, thereby motivating us to investigate fundamental membrane structure-physicochemical-transport relationships. Past research has shown that systematic tuning of crosslinked cation exchange membranes (CEMs) with charge-neutral monoacrylate monomers containing alkyl and phenyl groups (i.e., poly(ethylene glycol) methacrylate (PEGMA), and poly(ethylene glycol) phenyl ether acrylate (PEGPEA)) can suppress acetate transport (permeability) in co-permeation with methanol. To further investigate this transport behavior and to enhance membrane ionic conductivities, 3-sulfopropyl methacrylate potassium (SPMAK), a sulfonated monoacrylate monomer is incorporated here. SPMAK content is varied with neutral PEGPEA and diacrylate crosslinker, poly (ethylene glycol) diacrylate (PEGDA) of two different chain lengths (n = 10 and 13) to prepare membranes of various compositions. Electrochemical and physicochemical properties including ionic conductivity, ion exchange capacity, and water uptake increase with increasing charged SPMAK content. Different states of water within hydrated membranes are probed using differential scanning calorimetry (DSC), where increasing intermediate (loosely bound) water is observed with increasing hydrophilic SPMAK content. The transport behavior of methanol and carboxylates (formate, acetate, propionate) are investigated, where permeabilities vary as methanol > formate > acetate ≈ propionate. Interestingly, permeabilities decrease with increasing PEGPEA content and are more dependent on solute diffusion than sorption. Permeabilities and diffusivities decrease while permselectivities increase with decreasing PEGDA chain length.

25 ENERGY STORAGE↗

Surface interactions and degradation of a fluoroquinolone antibiotic in the dark in aqueous TiO 2 suspensions

Fluoroquinolone antibiotics (FQs) are important drugs used in human and veterinary medicine. Their detection in natural waters and waste water treatment plants, along with increased resistance to FQs among some bacteria, have generated an increased interest in the fate of these drugs in the environment. Partitioning of FQs between an aqueous solution and attendant substrates depends, in part, on the surface reactivity of the adsorbent, commonly a function of particle size, surface charge, and functional groups. In this paper, this study investigated the surface interactions between the FQ drug ofloxacin (OFL) and titanium oxide (TiO 2 ), a common catalyst and widely-observed constituent in many consumer products. Raman and fluorescence spectroscopic techniques, as well as LC/MS, were used to determine the OFL moieties present on TiO 2 surfaces and in attendant solutions. Raman spectra indicate that the C==O (ketone) group of the quinolone core, the NH + of the piperazinyl ring, and CH 3 of benzoxazine core are the most active in sorption onto the TiO 2 surface. Raman spectra also show that the sorbed benzoxazine–quinolone core and piperazinyl moieties are readily desorbed from the surface by re-suspending samples in water. Importantly, we found that OFL could be degraded by reacting with TiO 2 even in the dark. Complementary LC/MS analysis of the attendant supernatants indicates the presence of de-piperazinylated and de-carboxylated OFL breakdown products in supernatant solutions. Together, both Raman and LC/MS analyses indicate that TiO 2 breaks the compound into piperazinyl and carboxylate groups which attach to the surface, whereas de-carboxylated and hydroxylated quinolone moieties remain in solution. Finally, the present study thus identifies the sorption mechanisms and breakdown products of OFL during dark reactions with TiO 2 , which is critically important for understanding the fate and transport of OFL as it enters the soil and aquatic environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Dissolved organic matter reduces the effectiveness of sorbents for mercury removal

Mercury (Hg) contamination of soils and sediments impacts numerous environments worldwide and constitutes a challenging remediation problem. In this study, we evaluate the impact of dissolved organic matter (DOM) on the effectiveness of eight sorbent materials considered for Hg remediation in soils and sediments. The materials include both engineered and unmodified materials based on carbon, clays, mesoporous silica and a copper alloy. Initially, we investigated the kinetics of Hg(II) complexation with DOM for a series of Hg:DOM ratios. Steady-state Hg-DOM complexation occurred within 48 to 120 h, taking longer time at higher Hg:DOC (dissolved organic carbon) molar ratios. In subsequent equilibrium experiments, Hg(II) was equilibrated with DOM at a defined Hg:DOC molar ratio (2.4 · 10 –6 ) for 170 h and used in batch experiments to determine the effect of DOM on Hg partition coefficients and sorption isotherms by comparing Hg(II) and Hg-DOM. Hg sorption capacities of all sorbents were severely limited in the presence of DOM as a competing ligand. Thiol-SAMMS®, SediMite™ and pine biochar were most effective in reducing Hg concentrations. While pine biochar and lignin-derived carbon processed at high temperatures released negligible amounts of anions into solution, leaching of sulfate and chloride was observed for most engineered sorbent materials. Sulfate may stimulate microbial communities harboring sulfate reducing bacteria, which are considered one of the primary drivers of microbial mercury methylation in the environment. Here, the results highlight potential challenges arising from the application of sorbents for Hg remediation in the field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗