Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Rate Constrained”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Estimating the reproductive number, total outbreak size, and reporting rates for Zika epidemics in South and Central America

As South and Central American countries prepare for increased birth defects from Zika virus outbreaks and plan for mitigation strategies to minimize ongoing and future outbreaks, understanding important characteristics of Zika outbreaks and how they vary across regions is a challenging and important problem. We developed a mathematical model for the 2015/2016 Zika virus outbreak dynamics in Colombia, El Salvador, and Suriname. We fit the model to publicly available data provided by the Pan American Health Organization, using Approximate Bayesian Computation to estimate parameter distributions and provide uncertainty quantification. The model indicated that a country-level analysis was not appropriate for Colombia. We then estimated the basic reproduction number to range between 4 and 6 for El Salvador and Suriname with a median of 4.3 and 5.3, respectively. We estimated the reporting rate to be around 16% in El Salvador and 18% in Suriname with estimated total outbreak sizes of 73,395 and 21,647 people, respectively. The uncertainty in parameter estimates highlights a need for research and data collection that will better constrain parameter ranges.

60 APPLIED LIFE SCIENCES↗

Absorption characteristics of lithium bromide (LiBr) solution constrained by superhydrophobic nanofibrous structures

An experimental study on absorption characteristics of water vapor into a thin lithium bromide (LiBr) solution flow is presented. The LiBr solution flow is constrained between a superhydrophobic vapor permeable wall and a solid surface that removes the heat of absorption. As opposed to conventional falling film absorbers, in this configuration, the solution film thickness and velocity can be controlled independently to enhance the absorption rate. The effects of water vapor pressure, cooling surface temperature, solution film thickness, and solution flow velocity on the absorption rate are studied. An absorption rate of approximately 0.006 kg/m(2) s was measured at a LiBr solution channel thickness and flow velocity of 100 mu m and 5 mm/s, respectively. The absorption rate increased linearly with the water vapor driving potential at the test conditions of this study. It was demonstrated that decreasing the solution film thickness and increasing the solution velocity enhance the absorption rate. The high absorption rate and the inherently compact form of the proposed,absorber facilitate development of compact small-scale waste heat or solar-thermal driven cooling systems. Published by Elsevier Ltd.

Isfahani, RN↗

Controlling Thin-Film Stress and Wrinkling during Perovskite Film Formation

Significant effort has focused on controlling the deposition of perovskite films to enable uniform films, enabling efficiencies to climb dramatically. However, little attention has been paid to the evolution of thin-film stresses during deposition and the consequent effect on film morphology. While a textured surface topology has potential benefits for light scattering, a smooth surface is desirable to enable the pinhole-free deposition of contact layers. In this paper, we show that the highly textured morphology made by popular antisolvent conversion methods arises because of in-plane compressive stress experienced during the intermediate phase of film formation where the substrate constrains the film from expanding—leading to energy release in the form of wrinkling, resulting in trenches that can be hundreds of nanometers deep with periods of several micrometers. Finally, we demonstrate that the extent of wrinkling is correlated with the rate of film conversion and that ultrasmooth films are obtained by slowing the rate of film formation.

36 MATERIALS SCIENCE↗

Seasonal Evolution of the Subglacial Hydrologic System Modified by Supraglacial Lake Drainage in Western Greenland

The impact of summer surface melt on Greenland Ice Sheet dynamics is modulated by the state of the subglacial hydrologic system. Studies of ice motion indicate that efficiency of the subglacial system increases over the melt season, decreasing the sensitivity of ice motion to surface melt inputs. However, the behavior of the subglacial hydrologic system is complex and some characteristics are still poorly constrained. Here we investigate the coevolution of subglacial hydrology and ice motion in the Pâkitsoq region of western Greenland during the 2011 melt season. We analyze measurements from 11 Global Positioning System stations, from which we derive ice velocity, longitudinal strain rates, and basal uplift, alongside observations of surface ablation and supraglacial lake drainages. We observe ice acceleration after the onset of local surface melting, followed by gradual ice deceleration, consistent with increasing subglacial efficiency. In the study area, supraglacial lake drainages cooccur with a change in regional strain rate patterns and ice deceleration, suggesting that lake drainages contribute to rapid subglacial reorganization. At lower ice surface elevations (below ~900 m above sea level), ice motion is correlated with both total basal uplift and its rate of change, while at higher elevations (~900–1,100 m above sea level), ice motion correlated only with the basal uplift rate. This pattern suggests that continued cavity growth or subglacial sediment dynamics may be important in the apparent increase in subglacial drainage efficiency at higher elevations in the ablation zone. Furthermore, our results further suggest that transient subglacial behavior is important in the seasonal evolution of ice motion.

58 GEOSCIENCES↗

Quantifying global soil carbon losses in response to warming

The majority of the Earth’s terrestrial carbon is stored in the soil. If anthropogenic warming stimulates the loss of this carbon to the atmosphere, it could drive further planetary warming. Despite evidence that warming enhances carbon fluxes to and from the soil, the net global balance between these responses remains uncertain. Here we present a comprehensive analysis of warming- induced changes in soil carbon stocks by assembling data from 49 field experiments located across North America, Europe and Asia. We find that the effects of warming are contingent on the size of the initial soil carbon stock, with considerable losses occurring in high-latitude areas. By extrapolating this empirical relationship to the global scale, we provide estimates of soil carbon sensitivity to warming that may help to constrain Earth system model projections. Our empirical relationship suggests that global soil carbon stocks in the upper soil horizons will fall by 30 ± 30 petagrams of carbon to 203 ± 161 petagrams of carbon under one degree of warming, depending on the rate at which the effects of warming are realized. Under the conservative assumption that the response of soil carbon to warming occurs within a year, a business-as-usual climate scenario would drive the loss of 55 ± 50 petagrams of carbon from the upper soil horizons by 2050. This value is around 12-17 per cent of the expected anthropogenic emissions over this period. Despite the considerable uncertainty in our estimates, the direction of the global soil carbon response is consistent across all scenarios. This provides strong empirical support for the idea that rising temperatures will stimulate the net loss of soil carbon to the atmosphere, driving a positive land carbon–climate feedback that could accelerate climate change.

58 GEOSCIENCES↗

Double beta decay

The subjects of the two-neutrino (2{nu}{beta}{beta}) and neutrinoless double beta (0{nu}{beta}{beta}) decays are introduced. The main theoretical and experimental issues related to the double beta decay are discussed. It is stressed that the study of the 0{nu}{beta}{beta} decay is the most important source of information about the Majorana nature of neutrinos. In addition, the 0{nu}{beta}{beta}-decay half-life can constrain the absolute neutrino mass-scale and the neutrino mass pattern. Morever, the Majorana CP-violating phases, which might be responsible for the matter asymmetry of the Universe, could be deduced from the measured 0{nu}{beta}{beta}-decay rate, once this process will be observed. One can conclude that the double beta decay is an important process for the fields of nuclear physics, particle physics, astrophysics and cosmology.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A UNIVERSAL LUMINOSITY FUNCTION FOR RADIO SUPERNOVA REMNANTS

We compile radio supernova remnant (SNR) samples from the literature for 19 nearby galaxies ranging from the SMC to Arp 220, and use this data to constrain the SNR luminosity function (LF) at 20 cm. We find that radio SNR populations are strikingly similar across galaxies. The LF can be described as a power law with constant index and scaling proportional to a galaxy's star formation rate (SFR). Unlike previous authors, we do not find any dependence of SNR luminosity on a galaxy's global interstellar medium density. The observed correlation between the luminosity of a galaxy's brightest SNR and a galaxy's SFR can be completely explained by statistical effects, wherein galaxies with higher SFR more thoroughly sample the high-luminosity end of the SNR LF. The LF is well fitted by a model of SNR synchrotron emission which includes diffusive shock acceleration and magnetic field amplification, if we assume that all remnants are undergoing adiabatic expansion, the densities of star-forming regions are similar across galaxies, and the efficiency of cosmic ray production is constant.

79 ASTRONOMY AND ASTROPHYSICS↗

KINEMATIC ANALYSIS OF NUCLEAR SPIRALS: FEEDING THE BLACK HOLE IN NGC 1097

We present a harmonic expansion of the observed line-of-sight velocity field as a method to recover and investigate spiral structures in the nuclear regions of galaxies. We apply it to the emission-line velocity field within the circumnuclear star-forming ring of NGC 1097, obtained with the GMOS-IFU spectrograph. The radial variation of the third harmonic terms is well described by a logarithmic spiral, from which we interpret that the gravitational potential is weakly perturbed by a two-arm spiral density wave with an inferred pitch angle of 52{sup 0} {+-} 4{sup 0}. This interpretation predicts a two-arm spiral distortion in the surface brightness, as hinted by the dust structures in central images of NGC 1097, and predicts a combined one-arm and three-arm spiral structure in the velocity field, as revealed in the non-circular motions of the ionized gas. Next, we use a simple spiral perturbation model to constrain the fraction of the measured non-circular motions that is due to radial inflow. We combine the resulting inflow velocity with the gas density in the spiral arms, inferred from emission-line ratios, to estimate the mass inflow rate as a function of radius, which reaches about 0.011 M{sub sun} yr{sup -1} at a distance of 70 pc from the center. This value corresponds to a fraction of about 4.2 x 10{sup -3} of the Eddington mass accretion rate onto the central black hole in this LINER/Seyfert1 galaxy. We conclude that the line-of-sight velocity can not only provide a cleaner view of nuclear spirals than the associated dust, but that the presented method also allows the quantitative study of these possibly important links in fueling the centers of galaxies, including providing a constraint on the mass inflow rate as a function of radius.

79 ASTRONOMY AND ASTROPHYSICS↗

Photon-dominated region modeling of the [C I], [C II], and CO Line Emission From A Boundary In The Taurus molecular cloud

We present [C I] and [C II] observations of a linear edge region in the Taurus molecular cloud, and model this region as a cylindrically symmetric photon-dominated region (PDR) exposed to a low-intensity UV radiation field. The sharp, long profile of the linear edge makes it an ideal case to test PDR models and determine cloud parameters. We compare observations of the [C I], {sup 3} P {sub 1} → {sup 3} P {sub 0} (492 GHz), [C I] {sup 3} P {sub 2} → {sup 3} P {sub 1} (809 GHz), and [C II] {sup 2} P {sub 3/2} → {sup 2} P {sub 1/2} (1900 GHz) transitions, as well as the lowest rotational transitions of {sup 12}CO and {sup 13}CO, with line intensities produced by the RATRAN radiative transfer code from the results of the Meudon PDR code. We constrain the density structure of the cloud by fitting a cylindrical density function to visual extinction data. We study the effects of variation of the FUV field, {sup 12}C/{sup 13}C isotopic abundance ratio, sulfur depletion, cosmic ray ionization rate, and inclination of the filament relative to the sky-plane on the chemical network of the PDR model and resulting line emission. We also consider the role of suprathermal chemistry and density inhomogeneities. We find good agreement between the model and observations, and that the integrated line intensities can be explained by a PDR model with an external FUV field of 0.05 G {sub 0}, a low ratio of {sup 12}C to {sup 13}C ∼43, a highly depleted sulfur abundance (by a factor of at least 50), a cosmic ray ionization rate (3-6) × 10{sup –17} s{sup –1}, and without significant effects from inclination, clumping or suprathermal chemistry.

79 ASTRONOMY AND ASTROPHYSICS↗

CAN IBEX DETECT INTERSTELLAR NEUTRAL HELIUM OR OXYGEN FROM ANTI-RAM DIRECTIONS?

To better constrain the parameters of the interstellar neutral flow, we searched the Interstellar Boundary EXplorer (IBEX)-Lo database for helium and oxygen from the interstellar medium in the anti-ram direction in the three years (2009–2011) with the lowest background rates. We found that IBEX-Lo cannot observe interstellar helium from the anti-ram direction because the helium energy is too low for indirect detection by sputtering off the IBEX-Lo conversion surface. Our results show that this sputtering process has a low energy threshold between 25 and 30 eV, whereas the energy of the incident helium is only 10 eV for these observations. Interstellar oxygen, on the other hand, could in principle be detected in the anti-ram hemisphere, but the expected magnitude of the signal is close to the detection limit imposed by counting statistics and by the magnetospheric foreground.

79 ASTRONOMY AND ASTROPHYSICS↗

Axion hot dark matter bounds after Planck

We use cosmological observations in the post-Planck era to derive limits on thermally produced cosmological axions. In the early universe such axions contribute to the radiation density and later to the hot dark matter fraction. We find an upper limit m{sub a} < 0.67 eV at 95% C.L. after marginalising over the unknown neutrino masses, using CMB temperature and polarisation data from Planck and WMAP respectively, the halo matter power spectrum extracted from SDSS-DR7, and the local Hubble expansion rate H{sub 0} released by the Carnegie Hubble Program based on a recalibration of the Hubble Space Telescope Key Project sample. Leaving out the local H{sub 0} measurement relaxes the limit somewhat to 0.86 eV, while Planck+WMAP alone constrain the axion mass to 1.01 eV, the first time an upper limit on m{sub a} has been obtained from CMB data alone. Our axion limit is therefore not very sensitive to the tension between the Planck-inferred H{sub 0} and the locally measured value. This is in contrast with the upper limit on the neutrino mass sum, which we find here to range from Σ m{sub ν} < 0.27 eV at 95% C.L. combining all of the aforementioned observations, to 0.84 eV from CMB data alone.

79 ASTRONOMY AND ASTROPHYSICS↗

THE r-PROCESS IN MAGNETOROTATIONAL SUPERNOVAE

One of the hottest open issues involving the chemical evolution of r-process elements is fast enrichment in the early universe. Clear evidence for the chemical enrichement of r-process elements is seen in the stellar abundances of extremely metal poor stars in the Galactic halo. However, small-mass galaxies are the ideal testbed for studying the evolutionary features of r-process enrichment given the potential rarity of production events yielding heavy r-process elements. Their occurrences become countable and thus an enrichment path due to each event can be found in the stellar abundances. We examine the chemical feature of Eu abundance at an early stage of [Fe/H] ≲ −2 in the Draco and Sculptor dwarf spheroidal (dSph) galaxies. Accordingly, we constrain the properties of Eu production in the early dSphs. We find that the Draco dSph experienced a few Eu production events, whereas Eu enrichment took place more continuously in the Sculptor dSph due to its larger stellar mass. The event rate of Eu production is estimated to be about one per 100−200 core-collapse supernovae, and a Eu mass of ∼ (1–2) × 10{sup −5}M{sub ⊙} per single event is deduced by associating this frequency with the observed plateau value of [Eu/H] ∼ −1.3 for [Fe/H] ≳ −2. The observed plateau implies that early Eu enrichment ceases at [Fe/H] ≈ −2. Such a selective operation only in low-metallicity stars supports magnetorotational supernovae, which require very fast rotation, as the site of early Eu production. We show that the Eu yields deduced from chemical evolution agree well with the nucleosynthesis results from corresponding supernovae models.

79 ASTRONOMY AND ASTROPHYSICS↗

Molecular and Material Approaches to Overcome Kinetic and Energetic Constraints in Dye-Sensitized Solar Cells

Dye-sensitized solar cells (DSSCs) have attracted a lot of interest as they proffer the possibility of extremely inexpensive and efficient solar energy conversion. The excellent performance of the most efficient DSSCs relies on two main features: 1) a high surface area nanoparticle semiconductor photoanode to allow for excellent light absorption with moderate extinction molecular dyes and 2) slow recombination rates from the photoanode to I 3 - allowing good charge collection. The I 3 - /I - couple, however, has some disadvantages, notably the redox potential limits the maximum open-circuit voltage, and the dye regeneration requires a large driving force which constrains the light harvesting ability. Thus, the design features that allow DSSCs to perform as well as they do also prevent further significant improvements in performance. As a consequence, the most efficient device configuration, and the maximum efficiency, has remained essentially unchanged over the last 16 years. Significant gains in performance are possible; however it will likely require a substantial paradigm shift. The general goal of this project is to understand the fundamental role of dye-sensitized solar cell, DSSC, components (sensitizer, redox shuttle, and photoanode) involved in key processes in order to overcome the kinetic and energetic constraints of current generation DSSCs. For example, the key to achieving high energy conversion efficiency DSSCs is the realization of a redox shuttle which fulfills the dual requirements of 1) efficient dye regeneration with a minimal driving force and 2) efficient charge collection. In current generation DSSCs, however, only one or the other of these requirements is met. We are currently primarily interested in understanding the physical underpinnings of the regeneration and recombination reactions. Our approach is to systematically vary the components involved in reactions and interrogate them with a series of photoelectrochemical (PEC) measurements. The lessons learned will ultimately be used to develop design rules for next generation DSSCs.

14 SOLAR ENERGY↗

Optimization-based algorithms for nonlinear mechanics and frictional contact

An optimization-based strategy for solving nonlinear mechanics problems is proposed. In contrast to typical nonlinear equation solver algorithms that aim to find zeros in the residual force function, we minimize an energy (or energy-like) function to encourage solutions which are locally stable equilibria. These smooth and potentially non-convex objective functions are minimized using a preconditioned conjugate-gradient trust-region algorithm. Contact is formulated as an inequality constrained minimization problem, and is solved with an augmented Lagrangian algorithm. Friction is included in the approach via a regularized quasi-potential energy, and other dissipative behavior is included through the use of variational constitutive updates. Finally, to accelerate convergence rates for the Lagrange multipliers, we propose a novel multiplier update algorithm utilizing the Fischer-Burmeister function, and demonstrate super-linear solver convergence for some applications.

42 ENGINEERING↗

Topology Optimization with a Manufacturability Objective

Part distortion and residual stress are critical factors for metal additive manufacturing (AM) because they can lead to high failure rates during both manufacturing and service. We present a topology optimization approach that incorporates a fast AM process simulation at each design iteration to provide predictions of manufacturing outcomes (i.e., residual stress, distortion, residual elastic energy) that can be optimized or constrained. The details of the approach and implementation are discussed, and an example design is presented that illustrates the efficacy of the method.

42 ENGINEERING↗

A Field Study of Nonintrusive Load Monitoring Devices and Implications for Load Disaggregation

Evaluations of nonintrusive load monitoring (NILM) algorithms and technologies have mostly occurred in constrained, artificial environments. However, few field evaluations of NILM products have taken place in actual buildings under normal operating conditions. This paper describes a field evaluation of a state-of-the-art NILM product, tested in eight homes. The match rate metric—a technique recommended by a technical advisory group—was used to measure the NILM’s success in identifying specific loads and the accuracy of the energy consumption estimates. A performance assessment protocol was also developed to address common issues with NILM mislabeling and ground-truth comparisons that have not been sufficiently addressed in past evaluations. The NILM product’s estimates were compared to the submetered consumption of eight major appliances. Overall, the product had good performance in disaggregating the energy consumption of the electric water heaters, which included both electric resistance and heat-pump water heaters, but only a fair accuracy with refrigerators, dryers, and air conditioners. The performance was poor for cooking equipment, furnace fans, clothes washers, and dishwashers. Moreover, the product was often unable to detect major loads in homes. Typically, two or more appliances were not detected in a home. At least two dryers, furnace fans, and air conditioners went undetected across the eight homes. On the other hand, the dishwasher was detected in all homes where available or monitored. The key findings were qualitatively compared to those of past field evaluations. Potential areas for improvement in NILM product performance were determined along with areas where complementary technologies may be able to aid in load-disaggregation applications.

47 OTHER INSTRUMENTATION↗

Model sensitivity studies of the decrease in atmospheric carbon tetrachloride

Carbon tetrachloride (CCl 4 ) is an ozone-depleting substance, which is controlled by the Montreal Protocol and for which the atmospheric abundance is decreasing. But, the current observed rate of this decrease is known to be slower than expected based on reported CCl 4 emissions and its estimated overall atmospheric lifetime. Here we use a three-dimensional (3-D) chemical transport model to investigate the impact on its predicted decay of uncertainties in the rates at which CCl 4 is removed from the atmosphere by photolysis, by ocean uptake and by degradation in soils. The largest sink is atmospheric photolysis (74 % of total), but a reported 10 % uncertainty in its combined photolysis cross section and quantum yield has only a modest impact on the modelled rate of CCl 4 decay. This is partly due to the limiting effect of the rate of transport of CCl 4 from the main tropospheric reservoir to the stratosphere, where photolytic loss occurs. The model suggests large interannual variability in the magnitude of this stratospheric photolysis sink caused by variations in transport. The impact of uncertainty in the minor soil sink (9 % of total) is also relatively small. In contrast, the model shows that uncertainty in ocean loss (17 % of total) has the largest impact on modelled CCl 4 decay due to its sizeable contribution to CCl 4 loss and large lifetime uncertainty range (147 to 241 years). Furthermore, with an assumed CCl 4 emission rate of 39 Gg year -1 , the reference simulation with the best estimate of loss processes still underestimates the observed CCl 4 (overestimates the decay) over the past 2 decades but to a smaller extent than previous studies. Changes to the rate of CCl 4 loss processes, in line with known uncertainties, could bring the model into agreement with in situ surface and remote-sensing measurements, as could an increase in emissions to around 47 Gg year -1 . Further progress in constraining the CCl 4 budget is partly limited by systematic biases between observational datasets. For example, surface observations from the National Oceanic and Atmospheric Administration (NOAA) network are larger than from the Advanced Global Atmospheric Gases Experiment (AGAGE) network but have shown a steeper decreasing trend over the past 2 decades. The observed differences imply a difference in emissions which is significant relative to uncertainties in the magnitudes of the CCl 4 sinks.

54 ENVIRONMENTAL SCIENCES↗

Implementing belowground controls on nutrient uptake in ELMv2-SPRUCE improves representation of a boreal peatland ecosystem

Boreal peatlands store 13 %–32 % of the global soil carbon (C) stock, a service dependent on plant-mycorrhizal fungi associations. In these nutrient poor systems, ectomycorrhizal and ericoid mycorrhizal fungi supply up to >80 % of the nutrient requirements of their plant hosts, partly with mined nitrogen (N) and phosphorus (P) from soil organic matter that are otherwise inaccessible to plants. Despite the ecological significance, mycorrhizal associations are only represented in a few land surface or ecosystem models. We modify the peatland branch of version 2 of the Energy Exascale Earth System Land Model (ELMv2-SPRUCE) to replace the default photosynthesis-driven inorganic N and P (NP) uptake process with a more realistic representation of the process via three pathways: (1) direct inorganic NP uptake by uncolonized fine roots, (2) indirect inorganic NP acquisition and (3) indirect NP acquisition from organic sources by mycorrhizal roots. We systematically evaluated the performance of the default and modified models with field observations from a whole ecosystem warming and carbon dioxide fertilization experimental site: Spruce and Peatland Responses Under Changing Environment (SPRUCE), in northern Minnesota, USA. The modified model reduces the underestimation of the growth response of shrubs in the default model to warming from 40 %–80 % to 17 %–35 % and reduces the overall relative absolute error on C fluxes from 1.61 to 1.54 in calibration. Improvements on modeled shrub growths and shrub-moss community net ecosystem exchanges are also seen in validation. The improved growth response of shrubs to warming is accompanied by several-fold increase in direct inorganic NP uptake and decrease in fungal colonization rate. The modified model simulates a smaller magnitude of transition of the ecosystem from C sink to C source under warming due to alleviation of plant nutrient limitation. Equifinality analysis shows the newly added parameters in the modified model can be constrained by the observed C fluxes. Sensitivity analysis shows the newly added parameters have stronger statistical interactions than the preexisting parameters in the default model. Overall, the modified model is an improvement over the default ELMv2-SPRUCE and will be a useful tool for understanding boreal peatland change.

Wang, Yaoping [Oak Ridge National Laboratory (ORNL↗