Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Radioisotopes”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1975

Work on cardiovascular imaging supported by NASA and Stanford University

A bibliography of 55 works on cardiovascular imaging and related general cardiography is presented for the period ranging from mid-1975 back to 1968. The listing of papers is developed from a NASA library system computer search. The papers are divided by primary subject matter into the following categories: general cardiography including some comparisons of methods (22 papers), angiography (19 papers), echocardiography (11 papers), radioisotopes (1 paper), and magnetocardiography (2 papers).

Source record↗
NASA NTRS1977

Development of the data base for a degradation model of a selenide RTG

The paper is concerned with the evaluation of the materials used in a selenide radioisotope thermoelectric generator (RTG). These materials are composed of n-type gadolinium selenide and n-type copper selenide. A three-fold evaluation approach is being used: (1) the study of the rate of change of the thermal conductivity of the material, (2) the investigation of the long-term stability of the material's Seebeck voltage and electrical resistivity under current and temperature gradient conditions, and (3) determination of the physical behavior and compatibility of the material with surrounding insulation at elevated temperatures. Programmatically, the third category of characteristic evaluation is being emphasized.

Stapfer, G.↗
NASA NTRS1977

Results of metallographical diagnostic examination of Navy half-watt thermoelectric converters degraded by accelerated tests

To verify the 15-year reliability of the Navy half-watt radioisotope thermoelectric generator (RTG), bismuth-telluride thermoelectric converters were submitted to testing at high temperatures which accelerated the degradation and caused failure of the converters. Metallographic diagnostic examination of failed units verified failure mechanisms. Results of diagnostic examinations are presented.

Rosell, F. E., Jr.↗
NASA NTRS1978

Low-intensity x-ray and gamma-ray imaging device

Low-dosage, low-power X-ray system can be made completely self-contained, allowing fluoroscopy and radiography to be carried out in field and remote locations. New device, known as "lixiscope," can be used with conventional X-ray machine turned down to low level, or, it can be operated with radioisotope source for hand-held portable applications. Originally developed for X-ray astronomy, lixiscope obtains high sensitivity by using intermediate stages of photoelectron conversion and electron amplification to generate image suitable for direct viewing or for recording on film.

Yin, L. I.↗
NASA NTRS1977

Voyager electronic parts radiation program, volume 1

The Voyager spacecraft is subject to radiation from external natural space, from radioisotope thermoelectric generators and heater units, and from the internal environment where penetrating electrons generate surface ionization effects in semiconductor devices. Methods for radiation hardening and tests for radiation sensitivity are described. Results of characterization testing and sample screening of over 200 semiconductor devices in a radiation environment are summarized.

Stanley, A. G.↗
NASA NTRS1978

The cosmic ray record in the San Juan Capistrano meteorite

Measurements of cosmic ray track densities, rare gas concentrations, and radioisotope activities on the same sample of the San Juan Capistrano (SJC) meteorite (March 15, 1973) were combined in order to obtain a consistent picture of the irradiation history of the meteorite. The latter was recovered in two fragments weighing 50.5 and 5.5 g, respectively, which were then sampled according to the objectives set forward. The preatmospheric size of SJC and the depth occupied by the sample in the preatmospheric body were determined within narrow limits. In addition, the study compared estimates of the cosmic ray exposure age as determined by various techniques and evaluated the amount of ablation undergone when SJC penetrated the earth's atmosphere.

Finkel, R. C.↗
NASA NTRS1978

Development and fabrication of a diffusion welded Columbium alloy heat exchanger

A Mini Brayton space power generation system required the development of a Columbium alloy heat exchanger to transfer heat from a radioisotope heat source to a He/Xe working fluid. A light-weight design featured the simultaneous diffusion welding of 148 longitudinal fins in an annular heat exchanger about 9-1/2 in. in diameter, 13-1/2 in. in length and 1/4 in. in radial thickness. To complete the heat exchanger, additional gas ducting elements and attachment supports were added by GTA welding in a vacuum-purged inert atmosphere welding chamber. The development required the modification of an existing large size hot isostatic press to achieve HIP capabilities of 2800 F and 10,000 psi for at least 3 hr. Excellent diffusion welds were achieved in a high-quality component which met all system requirements.

Zimmerman, W. F.↗
NASA NTRS1976

OAST Space Theme Workshop. Volume 3: Working group summary. 6: Power (P-2). A. Statement. B. Technology needs (form 1). C. Priority assessment (form 2)

Power requirements for the multipurpose space power platform, for space industrialization, SETI, the solar system exploration facility, and for global services are assessed for various launch dates. Priorities and initiatives for the development of elements of space power systems are described for systems using light power input (solar energy source) or thermal power input, (solar, chemical, nuclear, radioisotopes, reactors). Systems for power conversion, power processing, distribution and control are likewise examined.

Source record↗
NASA NTRS1978

A summary of USSR thermionic energy conversion activity

The paper surveys the research and development associated with thermionic energy conversion in the USSR. Consideration is given to the basic physics of the thermionic converter, the development of thermionic nuclear reactors including the three TOPAZ models, radioisotope-heated generators, and the thermionic topping of fossil-fueled electric-power plants. Comparisons are made between U.S. and USSR capabilities in thermionic energy conversion and potential cooperative programs are noted.

Rasor, N. S.↗
NASA NTRS1978

Selenide technology evaluation program at JPL

Results are presented for experimental and analytical investigations of the overall performance of a selenide radioisotope thermoelectric generator intended to provide the electrical power for interplanetary spaceprobes such as the Galileo mission to Jupiter. The discussion focuses on technology areas of concern, electrical properties of the selenide thermoelectric materials used, and thermal conductivity of these materials for superior performance. It is shown that the selenide thermoelectric materials offer the advantage of high conversion efficiency. The long-life requirement on the power system for the Galileo mission necessitates proper design, known fabrication techniques, and reproducible assembly techniques in order to ensure stability of the thermoelectric properties. However, the thermophysical properties - sublimation and creep - of the p-material remains an area of considerable concern.

Stapfer, G.↗
NASA NTRS1978

Support system considerations for STS biological investigations

Equipment required for Space Transportation System biological experiments is considered, and environmental factors and operational constraints affecting the performance of experiments are examined. Specimen housing is discussed, problems associated with telemetry procedures are characterized, and attention is directed to the problems of handling hazardous fixatives, radioisotopes, and chemicals.

Bowman, G. H.↗
NASA NTRS1979

Voyager 1 encounter with the Jovian system

An overview of the Voyager 1 encounter with Jupiter is presented. Voyager conducted close range measurements of the atmosphere, satellites and magnetosphere of Jupiter from January 6, 1979 to April 13, 1979, coming as close as 348,890 km to the planet. The three-axis stabilized spacecraft carries radioisotope thermoelectric generators providing 445 W of power to the instruments and transmitters and makes use of an X-band telemetry rate of up to 115.2 kbit/sec, a scan platform providing pointing control of 0.15 deg/axis for the instruments carried on it, and three interconnected computer systems. The trajectory of Voyager through the Galilean satellites is illustrated, noting that the trajectory allows for periods of sun and earth occultation, south polar passage by Io, close encounters with Ganymede and Callisto and earth-Jupiter communications distances supporting 21 to 22 h of maximum data rates daily. Highlights of the results of the investigations are presented.

Stone, E. C.↗
NASA NTRS1979

Analytical predictions of RTG power degradation

The DEGRA computer code that is based on a mathematical model which predicts performance and time-temperature dependent degradation of a radioisotope thermoelectric generator is discussed. The computer code has been used to predict performance and generator degradation for the selenide Ground Demonstration Unit (GDS-1) and the generator used in the Galileo Project. Results of parametric studies of load voltage vs generator output are examined as well as the I-V curve and the resulting predicted power vs voltage. The paper also discusses the increased capability features contained in DEGRA2 and future plans for expanding the computer code performance.

Noon, E. L.↗
NASA NTRS1975

Evaluation and comparison of alternative designs for water/solid-waste processing systems for spacecraft

Promising candidate designs currently being considered for the management of spacecraft solid waste and waste-water materials were assessed. The candidate processes were: (1) the radioisotope thermal energy evaporation/incinerator process; (2) the dry incineration process; and (3) the wet oxidation process. The types of spacecraft waste materials that were included in the base-line computational input to the candidate systems were feces, urine residues, trash and waste-water concentrates. The performance characteristics and system requirements for each candidate process to handle this input and produce the specified acceptable output (i.e., potable water, a storable dry ash, and vapor phase products that can be handled by a spacecraft atmosphere control system) were estimated and compared. Recommendations are presented.

Spurlock, J. M.↗
NASA NTRS1980

Analysis of nuclear waste disposal in space, phase 3. Volume 2: Technical report

The options, reference definitions and/or requirements currently envisioned for the total nuclear waste disposal in space mission are summarized. The waste form evaluation and selection process is documented along with the physical characteristics of the iron nickel-base cermet matrix chosen for disposal of commercial and defense wastes. Safety aspects of radioisotope thermal generators, the general purpose heat source, and the Lewis Research Center concept for space disposal are assessed as well as the on-pad catastrophic accident environments for the uprated space shuttle and the heavy lift launch vehicle. The radionuclides that contribute most to long-term risk of terrestrial disposal were determined and the effects of resuspension of fallout particles from an accidental release of waste material were studied. Health effects are considered. Payload breakup and rescue technology are discussed as well as expected requirements for licensing, supporting research and technology, and safety testing.

Rice, E. E.↗
NASA NTRS1980

Viking Mars mission support investigations in the Langley transonic dynamics tunnel

Six experimental investigations conducted in the transonic dynamics tunnel, which supported elements of the entry and the landed phases of the Viking mission, are described. The objective of each investigation and selected experimental results are presented. How these particular wind tunnel results contributed to spacecraft development and ultimately to the success of the Viking mission is indicated. Experimental studies applicable to the entry phase of the mission included parachute environment and performance definition, aerodynamic characteristics exhibited by two separating bodies, and pressure measurements in the transonic range to optimize the location and orientation of a stagnation-pressure sensor on the Lander. The experimental investigations which supported the landed phase of the mission included a convective heat transfer test to establish the requirements for wind covers for the radioisotope thermoelectric generators and two tests which supported the development and calibration of the meteorological science experiment.

Foughner, J. T., Jr.↗
NASA NTRS1980

Oxygen production for interplanetary return missions

Interplanetary missions with extraterrestrial returns are limited by large propulsion mass requirements. The injected mass landed on an extraterrestrial body can be reduced substantially by utilizing indigenous materials for the production of propellant on the extraterrestrial body. Analyses reported show that for Mars return missions, in situ production of oxygen during the wait between landing and the next low-energy return opportunity reduces the Earth-launch mass requirements to the allowable limit for direct entry and direct return missions. A small chemical processor using radioisotope thermal energy can extract oxygen several times its own mass from carbon dioxide, during the several-hundred-days wait on Mars. The fundamental element of the concept is the electrolytic process. Solid electrolyte cells for extracting oxygen from gaseous feedstock are identified. The basic physical principles underlying the extraction process are analyzed, and the relations between the major parameters established. The laboratory equipment for experimental investigation of the process is presented.

Richter, R.↗
NASA NTRS1979

Primordial heating of asteroidal parent bodies

Most meteorites show evidence of thermal processing either because of metamorphic changes or as a result of melting and differentiation. Proposed mechanisms for supplying this energy generally rely upon short-lived radioisotopes or electrical induction, though accretion is sometimes mentioned, and more exotic models have been discussed. Interest in isotopic heating has been heightened by the discovery of Al-26 in Allende inclusions and also by the proposal that a lunar core and dynamo resulted from the radioactive decay of superheavy elements during the early solar system. Electrical induction as a heat source can be scaled to a broad range of solar system conditions, but corroborative evidence for these conditions is inconclusive. The accretion mechanism is probably not viable for the asteroidal and meteorite parent bodies, because the high kinetic energy requirement is inconsistent with the formation of the objects and their regoliths in the presence of a weak gravitational field.

Sonett, C. P.↗