Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Water-carbon dioxide solid phase equilibria at pressures above 4 GPa

A solid phase in the mixed water-carbon dioxide system, previously identified as carbonic acid, was observed in the high-pressure diamond-anvil cell. The pressure-temperature paths of both its melting and peritectic curves were measured, beginning at 4.4GPa and 165°C (where it exists in a quadruple equilibrium, together with an aqueous fluid and the ices H2O(VII) and CO2(I)) and proceeding to higher pressures and temperatures. Single-crystal X-ray diffraction revealed a triclinic crystal with unit cell parameters (at 6.5GPa and 20°C) of a=5.88Å, b=6.59Å, c=6.99Å, α=88.7°, β=79.7°, and γ=67.7°. Raman spectra exhibit a major line at ~1080cm-1 and lattice modes below 300cm-1.

54 ENVIRONMENTAL SCIENCES↗

Structural, electronic and vibrational properties of few-layer 2H-and 1T-TaSe 2

Two-dimensional metallic transition metal dichalcogenides (TMDs) are of interest for studying phenomena such as charge-density wave (CDW) and superconductivity. Few-layer tantalum diselenides (TaSe 2 ) are typical metallic TMDs exhibiting rich CDW phase transitions. However, a description of the structural, electronic and vibrational properties for different crystal phases and stacking configurations, essential for interpretation of experiments, is lacking. We present first principles calculations of structural phase energetics, band dispersion near the Fermi level, phonon properties and vibrational modes at the Brillouin zone center for different layer numbers, crystal phases and stacking geometries. Evolution of the Fermi surfaces as well as the phonon dispersions as a function of layer number reveals dramatic dimensionality effects in this CDW material. Lastly, our results indicate strong electronic interlayer coupling, detail energetically possible stacking geometries, and provide a basis for interpretation of Raman spectra.

36 MATERIALS SCIENCE↗

Presence of Li clusters in molten LiCl-Li

Molten mixtures of lithium chloride and metallic lithium are of significant interest in various metal oxide reduction processes. These solutions have been reported to exhibit seemingly anomalous physical characteristics that lack a comprehensive explanation. ln the current work, the physical chemistry of molten solutions of lithium chloride and metallic lithium, with and without lithium oxide, was investigated using in situ Raman spectroscopy. The Raman spectra obtained from these solutions were in agreement with the previously reported spectrum of the lithium cluster, Li 8 . Furthermore, this observation is indicative of a nanofluid type colloidal suspension of Li 8 , in a molten salt matrix. It is suggested that the formation and suspension of lithium clusters in lithium chloride is the cause of various phenomena exhibited by these solutions that were previously unexplainable.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Superconductivity and charge density wave in ZrTe 3–x Se x

Charge density wave (CDW), the periodic modulation of the electronic charge density, will open a gap on the Fermi surface that commonly leads to decreased or vanishing conductivity. On the other hand superconductivity, a commonly believed competing order, features a Fermi surface gap that results in infinite conductivity. Here we report that superconductivity emerges upon Se doping in CDW conductor ZrTe 3 when the long range CDW order is gradually suppressed. Superconducting critical temperature T c (x) in ZrTe 3–x Se x (0 ≤ x ≤ 0.1) increases up to 4 K plateau for 0.04 ≤ x ≤ 0.07. Further increase in Se content results in diminishing T c and filametary superconductivity. The CDW modes from Raman spectra are observed in x = 0.04 and 0.1 crystals, where signature of ZrTe 3 CDW order in resistivity vanishes. As a result, the electronic-scattering for high T c crystals is dominated by local CDW fluctuations at high temperatures, the resistivity is linear up to highest measured T = 300 K and contributes to substantial in-plane anisotropy.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High-pressure X-ray diffraction, Raman, and computational studies of MgCl 2 up to 1 Mbar: Extensive pressure stability of the β-MgCl 2 layered structure

We studied magnesium chloride (MgCl 2 ) with the rhombohedral layered CdCl 2 -type structure (α-MgCl 2 ), experimentally, using synchrotron angle-dispersive powder x-ray diffraction and Raman spectroscopy using a diamond-anvil cell up to 100 GPa at room temperature and theoretically using first-principles density functional calculations. Our results reveal a pressure-induced second-order structural phase transition to a hexagonal layered CdI 2 -type structure (β-MgCl 2 ) at 0.7 GPa: the stacking sequence of the Cl anions are altered resulting in a reduction of the c-axis length. Theoretical calculations confirm this phase transition sequence and the calculated transition pressure is in excellent agreement with the experiment. Lattice dynamics calculations also reproduce the experimental Raman spectra measured for the ambient and high-pressure phase. According to our experimental results MgCl 2 remains in a 2D layered phase up to 100 GPa and further, the 6-fold coordination of Mg cations is retained. Theoretical calculations of relative enthalpy suggest that this extensive pressure stability is due to a low enthalpy of the layered structure ruling out kinetic barrier effects. Our observation is unusual, as it contradicts with the general structural behavior of highly compressed AB 2 compounds.

36 MATERIALS SCIENCE↗

An integrated portable Raman sensor with nanofabricated gold bowtie array substrates for energetics detection

An integrated field-portable surface enhaned Raman scattering (SERS) sensing system has been developed and evaluated for quantitative analysis of energetics such as perchlorate (ClO4-) and trinitrotoluene (TNT) at environmentally-relevant concentrations and conditions. The detection system consists of a portable Raman spectrometer equipped with an optical fiber probe that is coupled with novel elevated gold bowtie nanostructural arrays as a sensitive and reproducible SERS substrate. Using the standard addition technique, we show that ClO4- and TNT can be quantified at concentrations as low as 0.66 mg/L (or ~6.6 M) and 0.20 mg/L (~0.9 M), respectively, in groundwater samples collected from selected military sites. This research represents the first step toward the development of a field SERS sensor which may permit rapid, in-situ screening and analysis for various applications including national security, chemical, biological and environmental detection.

Abu Hatab, Nahla A↗

Visible light plasmonic heating of Au-ZnO for the catalytic reduction of CO 2

Plasmonic excitation of Au nanoparticles attached to the surface of ZnO catalysts using low power 532 nm laser illumination leads to significant heating of the catalyst and the conversion of CO 2 and H 2 reactants to CH 4 and CO products. Temperature-calibrated Raman spectra of ZnO phonons show that intensity-dependent plasmonic excitation can controllably heat Au–ZnO from 30 to ~600 °C and simultaneously tune the CH 4 : CO product ratio. The laser induced heating and resulting CH 4 : CO product distribution agrees well with predictions from thermodynamic models and temperature-programmed reaction experiments indicating that the reaction is a thermally driven process resulting from the plasmonic heating of the Au-ZnO. The apparent quantum yield for CO 2 conversion under continuous wave (cw) 532 nm laser illumination is 0.030%. The Au-ZnO catalysts are robust and remain active after repeated laser exposure and cycling. The light intensity required to initiate CO 2 reduction is low ( ~2.5 x 10 5 W m -2 ) and achievable with solar concentrators. Our results illustrate the viability of plasmonic heating approaches for CO 2 utilization and other practical thermal catalytic applications.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Characterization of zein assemblies by ultra-small-angle X-ray scattering

Zein, a protein of corn, has an amphiphilic molecule capable of self-assembly into distinctly different structures. In this work, ultra-small-angle X-ray scattering (USAXS) was applied to investigate the formation of self-assembled zein structures in binary solvent systems of ethanol and water. Our study included observing structural changes due to aging. Three hierarchical structures were identified in zein-solvent systems, molecular zein 2D films, believed to be formed by zein rods assembled first into one-dimensional fibers and then into two-dimensional films, and 3D spherical aggregates. Aging did not change the size or shape of primary units, but promoted their self-assembly into intermediate 2D structures and shaped 3D structures into well19 defined spheres. We found that the rheological parameters, consistency index (K) and behavior index (n), storage and loss moduli (G’ and G”) were also measured. K and n, changed markedly with aging, from nearly Newtonian low consistency fresh samples to highly viscous pseudoplastic aged samples. G’ and G” increased with aging for all samples reflecting increased interactions among zein self-assembled structures. Furthermore, viscoelastic parameters indicated that zein dispersions formed gels upon aging. It was observed that USAX reported on molecular scale self-assembly processes, while rheological measurements reported on the macroscale interaction between self-assembled particles. Raman spectra suggested that α-helix to β-sheet transformations prompted zein self-assembly, which influenced the size and morphology of molecular assemblies and ultimately the rheological properties of zein dispersions.

36 MATERIALS SCIENCE↗

Impacts of hydrogen bonding interactions with Np(v/vi)O 2 Cl 4 complexes: vibrational spectroscopy, redox behavior, and computational analysis

The neptunyl (Np(V)O 2 + /Np(VI)O 2 2+ ) cation is the dominant form of 237 Np in acidic aqueous solutions and the stability of the Np(V) and Np(VI) species is driven by the specific chemical constituents present in the system. Hydrogen bonding with the oxo group may impact the stability of these species, but there is limited understanding of how these intermolecular interactions influence the behavior of both solution and solid-state species. In the current study, we systematically evaluate the interactions between the neptunyl tetrachloride species and hydrogen donors in coordination complexes and in the related aqueous solutions. Both Np(V) compounds (N 2 C 4 H 12 ) 2 [Np(V)O 2 Cl 4 ]Cl (Np(V)pipz) and (NOC 4 H 10 ) 3 [Np(V)O 2 Cl 4 ] (Np(V)morph) exhibit directional hydrogen bonding to the neptunyl oxo group while Np(VI) compounds (NC 5 H 6 ) 2 [Np(VI)O 2 Cl 4 ] (Np(VI)pyr) and (NOC 4 H 10 ) 4 [Np(VI)O 2 Cl 4 ]·2Cl (Np(VI)morph) assemble via halogen interactions. Here, the Raman spectra of the solid-state phases indicate the activation of vibrational bands when there is asymmetry of the neptunyl bond, while these spectral features are not observed within the related solution phase spectra. Density functional theory calculations of the Np(V)pipz system suggest that activation of the ν 3 asymmetric stretch and other combination modes lead to additional complexity within the solid-state spectra. Electrochemical analyses of complexes in the solution phases are consistent with the results of the crystallization experiments as the voltammetric potentials of Np(V)/Np(VI) complexes in the presence of protonated heterocycles differ from the potentials of pure Np(V) and may correlate with the hydrogen bonding interactions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantification of defects engineered in single layer MoS 2

Atomic defects are controllably introduced in suspended single layer molybdenum disulfide (1L MoS 2 ) using helium ion beam. Vacancies exhibit one missing atom of molybdenum and a few atoms of sulfur. Quantification was done using a Scanning Transmission Electron Microscope (STEM) with an annular detector. Experimentally accessible inter-defect distance was employed to measure the degree of crystallinity in 1L MoS 2 . A correlation between the appearance of an acoustic phonon mode in the Raman spectra and the inter-defect distance was established, which introduces a new methodology for quantifying defects in two-dimensional materials such as MoS 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Coordination and thermophysical properties of select trivalent lanthanides in LiCl–KCl

The coordination chemistry of various fission and decay products, such as actinides and lanthanides, are crucial to the commercial deployment of molten salt reactors as they can affect the thermophysical properties. In this report we examined the structure, coordination environment, and physical properties such as the density and the vibrational density of states for three lanthanide species, namely Ce, Eu, and Sm in the LiCl–KCl eutectic system using a combination of quantum mechanics simulations and spectroscopic experiments. Quantum mechanics molecular dynamics (QM-MD) modelling was employed to determine the physical properties of each system resulting in accurate local coordination of each species. Then, the vibrational density of states (DOS) was determined using a two-phase thermodynamic modelling which was then compared to the experimentally obtained Raman spectra of the species in molten LiCl–KCl having the eutectic composition. We find that Ce 3+ , Eu 3+ and Sm 3+ all adopt octahedral local coordination environments in the eutectic salt composition in good agreement with experimental results. Ce3+ is found to fluctuate between an octahedral six-coordinated and a seven-coordinated structure due to the increased local proximity of Cl in the eutectic salt, resulting in a lower fluidicity/diffusivity than the other trivalent lanthanides studied. The thermophysical properties of the eutectic composition with trivalent lanthanides were not significantly different from the pure eutectic salt composition, but several changes were noted.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure of silver pentazolates AgN 5 and AgN 6

Silver pentazolate, a high energy density compound containing the cyclo-N 5 – anion, has recently been synthesized under ambient conditions. However, due to high sensitivity to irradiation, its crystal structure has not been determined. In this work, silver–nitrogen crystalline compounds under ambient conditions and at high pressures, up to 100 GPa, are predicted and characterized by performing first-principles evolutionary crystal structure searching with variable stoichiometry. It is found that newly discovered AgN 5 and AgN 6 are the only thermodynamically stable silver–nitrogen compounds at pressures between 42 and 80 GPa. In contrast to AgN 5 , the pentazolate AgN 6 compound contains N 2 diatomic molecules in addition to cyclo-N 5 – . These AgN 5 and AgN 6 crystals are metastable under ambient conditions with positive formation enthalpies of 54.95 kJ mol –1 and 46.24 kJ mol –1 , respectively. Here, the underlying cause of the stability of cyclo-N 5 – silver pentazolates is the enhanced aromaticity enabled by the charge transfer from silver atoms to nitrogen rings. To aid in the experimental identification of these materials, calculated Raman spectra are reported at ambient pressure: the frequencies of N 5 – vibrational modes of AgN 5 are in good agreement with those measured in the experiment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Influence of diluent concentration in localized high concentration electrolytes: elucidation of hidden diluent-Li + interactions and Li + transport mechanism

Localized high concentration electrolytes (LHCE) offer a viable dilution strategy for high concentration electrolytes (HCE) as the dilution process barely impacts the enhanced reductive/oxidative behavior of the HCE formulation but significantly lowers the overall viscosity and, in most cases, increases the ionic conductivity. On the other hand, experimental studies indicate that fluorinated ether electrolytes such as 1,1,2,2-tetrafluoroethylene 2,2,3,3-tetrafluoropropyl ether (TTE) help grow enhanced passivation layers on Ni-rich NMC cathodes. In this work, we study LHCE formulations based on lithium bis(fluorosulfonyl)imide (LiFSI), dimethyl carbonate (DMC), and TTE as the diluent. Here we use molecular dynamics methodologies, and Raman spectra measurements, to address to what extent the diluent content impacts the coordination behavior of the aggregated structures in the electrolyte and to evaluate the Li + transport properties under the influence of an external electric field. In contrast to other fluorinated ethers, we find that TTE interacts with Li + via fluorine atoms, partially limiting the DMC–Li + interactions hence altering the Li + solvation coordination. This competitive interaction with Li+ between the organic solvent and the TTE diluent influences the electrolyte's reductive/oxidative behavior. Nevertheless, the bonding strength of the Li + –F TTE is much weaker than those of the Li + –O DMC and Li + –OFSI – . Therefore, the existence of Li + –F TTE is in a transient state rather than in a steady state. These results provide plausible guiding rules for future dilution strategies of HCE electrolytes. We also demonstrate that Li + ions drift under the electric field's influence via repeated ion dissociation/association processes following a hopping conduction mechanism. Li + ions jump between aggregated networks where Li–O interactions dominate via diluent-enriched phases, a process in which the solvation shells temporarily mutate to a Li–F dominated coordination structure. We expect our results to contribute an improved atomic-level understanding of the solvation structure and dynamics of LHCE electrolytes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Ferroelectric 2D antimony oxides with wide bandgaps

The first two-dimensional (2D) polymorphs of antimony dioxide, namely, γ-Sb 2 O 4 and δ-Sb 2 O 4 , are predicted using the evolutionary algorithm combined with first-principles density functional theory (DFT) calculations. Out-of-plane ferroelectricity is found in γ-Sb 2 O 4 , while in-plane ferroelectricity is found in δ-Sb 2 O 4 . The predicted dipole moments of γ-Sb 2 O 4 and δ-Sb 2 O 4 phases are 36.63 and 14.96 eÅ, respectively, implying that they can be good candidates for making ferroelectric devices. Further, the calculations show that doping with other group V elements or applying strain can lower the switching energy barriers and thus facilitate switching. Results from GW calculations show indirect band gaps of 5.51 and 3.39 eV for γ-Sb 2 O 4 and δ-Sb 2 O 4 in their monolayers, respectively. Raman spectra are calculated to facilitate the experimental investigation of the predicted structures. The existence of both in-plane and out-of-plane 2D ferroelectricity and the large band gaps make this material system particularly interesting for potential applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of ultraviolet irradiation on energy band structure and conductivity of polyaniline

The effects of ultraviolet (UV) irradiation on the electrical property of polyaniline (PANI) have been researched in this study. Spectroscopic methods [Raman spectroscopy (532 nm excitation) and x-ray photoelectron spectroscopy] and electrical conductivity measurements were used to characterize the conducting polymer PANI with and without UV irradiation. The authors found that UV irradiation could lead to degenerating electrical conductivity of PANI, resulting from an increase in the surface band bending and a reduction in the work function.

36 MATERIALS SCIENCE↗

Raman and electron microscopic studies of Si{sub 1-x}Ge{sub x} alloy nanowires grown by chemical vapor deposition

Si{sub 1-x}Ge{sub x} alloy nanowires (SiGeNWs) were grown by Au-catalyzed chemical vapor deposition and studied by Raman spectroscopy, transmission electron microscopy (TEM), and energy-dispersive x-ray spectroscopy (EDS) in TEM (TEM-EDS). The relationship between the growth parameters and the structure of the SiGeNWs was clarified by systematically changing the growth conditions over a wide range. Raman and TEM-EDS results demonstrated that the SiGeNWs consist of a lower Ge composition core and a higher Ge composition shell epitaxially grown on the surface of the core. The effects of oxidation on the structure of the SiGeNWs were studied. It was found that oxidation leads to segregation of the Ge atoms at the interface between the SiGeNWs and SiO{sub 2}, which in turn results in a large inhomogeneity in Ge composition. Oxidation at a very low rate in a diluted oxygen gas atmosphere is required to avoid the formation of Ge particles and minimize the inhomogeneity.

36 MATERIALS SCIENCE↗

On the growth of carbon nanofibers on glass with a Cr layer by inductively coupled plasma chemical vapor deposition: The effect of Ni film thickness

We have studied the effect of the thickness of catalytic Ni film for the growth of vertically aligned carbon nanofibers (VA-CNFs) on glass substrates coated with a conductive underlayer of Cr. Both the pretreatment process through which the catalytic Ni nanoparticles were formed and the growth of well-aligned CNFs were carried out in an inductively coupled plasma chemical vapor deposition (ICP-CVD) system. The VA-CNFs were characterized by scanning electron microscopy, Raman spectroscopy, as well as field emission measurements. The results of VA-CNF growth shows that as the Ni film thicknesses decrease, not only the length but also the density of the CNFs drop, although the density of catalytic Ni nanoparticles increases. The variation of CNF density with Ni film thicknesses is believed to be a result of the detachment of the CNFs from the substrate, caused by the electrostatic force produced by the plasma sheath electric field, as well as an ion-enhanced chemical etching effect due to atomic/ionic hydrogen, during the ICP-CVD growth. A field emission measurement apparatus based on a metallic probe of spherical anode structure was also constructed in this study. An electrostatic image model was employed to determine the electric field distribution on the cathode surface. Along with the standard F-N field emission model, the dependence of field emission current density on the cathode surface electric field, as well as an effective field enhancement factor, were extracted from the current-voltage measurement results. The threshold electric field (E{sub threshold}, for a current density of 1 mA/cm{sup 2}) increases from 9.2 V/{mu}m to 13.1 V/{mu}m, and then drops to 11.5 V/{mu}m for the CNFs with Ni film thicknesses of 20 nm, 30 nm, and 40 nm, respectively. The electrostatic model results also indicate that the 20 nm case has the greatest space-charge effect on the emission current, consistent with the growth results that the 20 nm case has the lowest CNF density. On the other hand, the CNF length of the 40 nm case is longer than that of the 30 nm one, while the densities are nearly the same; as a result, E{sub threshold} for the 30 nm case is higher.

36 MATERIALS SCIENCE↗

Structure and optical properties of pulsed sputter deposited Cr{sub x}O{sub y}/Cr/Cr{sub 2}O{sub 3} solar selective coatings

Spectrally selective Cr{sub x}O{sub y}/Cr/Cr{sub 2}O{sub 3} multilayer absorber coatings were deposited on copper (Cu) substrates using a pulsed sputtering system. The Cr targets were sputtered using asymmetric bipolar-pulsed dc generators in Ar+O{sub 2} and Ar plasmas to deposit a Cr{sub x}O{sub y} (bottom layer)/Cr/Cr{sub 2}O{sub 3} (top layer) coating. The compositions and thicknesses of the individual component layers have been optimized to achieve high absorptance (0.899-0.912) and low emittance (0.05-0.06). The x-ray diffraction data in thin film mode showed that the Cr{sub x}O{sub y}/Cr/Cr{sub 2}O{sub 3} coating consists of an amorphous phase; the Raman data of the coating, however, showed the presence of A{sub 1g} and E{sub g} modes, characteristic of Cr{sub 2}O{sub 3}. The x-ray photoelectron spectroscopy (XPS) data from near-surface region of the absorber suggested that the chemical state of Cr was in the form of Cr{sup 3+} and no phases of CrO{sub 2} and CrO{sub 3} were present. The experimental spectroscopic ellipsometric data have been fitted with theoretical models to derive the dispersion of the optical constants (n and k). The optical constants of the three layers indicate that the bottom two layers are the main absorber layers and the top Cr{sub 2}O{sub 3} layer, which has higher oxygen content, acts as an antireflection coating. In order to study the thermal stability of the Cr{sub x}O{sub y}/Cr/Cr{sub 2}O{sub 3} coatings, they were subjected to heat treatment (in air and vacuum) at different temperatures and durations. The coating deposited on Cu substrates exhibited high solar selectivity ({alpha}/{epsilon}) of 0.895/0.06 even after heat treatment in air up to 300 deg. C for 2 h. At higher temperatures, the solar selectivity decreased significantly (e.g., {alpha}/{epsilon}=0.855/0.24 at 350 deg. C in air), which is attributed to oxidation of Cr crystallites, increased surface roughness, and formation of CuO. The formation of CuO and the increase in Cr{sup 3+} vacancies due to the outward diffusion of Cr at higher annealing temperatures were confirmed by XPS. In the case of vacuum annealing, for temperatures greater than 500 deg. C the outward diffusion of Cu was the dominating degradation mechanism. The microstructural stability of the absorber coatings heat treated in air (up to 325 deg. C) and vacuum (up to 600 deg. C) was confirmed by micro-Raman spectroscopy measurements. Studies on the accelerated aging tests indicated that the absorber coatings on Cu were stable in air up to 250 h at 250 deg. C with a solar selectivity of 0.898/0.11.

36 MATERIALS SCIENCE↗