Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

A surface plasmon enabled liquid-junction photovoltaic cell

Plasmonic nanosystems have recently been shown to be capable of functioning as photovoltaics and of carrying out redox photochemistry, purportedly using the energetic electrons and holes created following plasmonic decay as charge carriers. Although such devices currently have low efficiency, they already manifest a number of favorable characteristics, such as their tunability over the entire solar spectrum and a remarkable resistance to photocorrosion. Here, we report a plasmonic photovoltaic using a 25 μm thick electrolytic liquid junction which supports the iodide/triiodide (I - /I 3 - ) redox couple. The device produces photocurrent densities in excess of 40 μA cm -2 , an open circuit voltage ( V oc ) of ~0.24 V and a fill factor of ~0.5 using AM 1.5 G solar radiation at 100 mW cm -2 . The photocurrent and the power conversion efficiency are primarily limited by the low light absorption in the 2-D gold nanoparticle arrays. The use of a liquid junction greatly reduces dielectric breakdown in the oxide layers utilized, which must be very thin for optimal performance, leading to a great improvement in the long-term stability of the cell's performance.

Lee, Woo-ram↗

Molecular dynamics simulation of the structural, elastic, and thermal properties of pyrochlores

We present a comprehensive simulation study of the effect of composition on the structural, elastic and thermal properties of 25 different compounds from the pyrochlore family. We joined a repulsive potential to an existing interatomic potential to enable molecular dynamics simulations of conditions away from equilibrium. We systematically varied the chemistry of the pyrochlore by substituting different cations in the A and B sites of the A2B2O7 formula unit. The A cations varied from Lu3+ to La3+, and the B cations from Ti4+ to Ce4+. The lattice parameter increased steadily with increasing the radius of A or B cations, but the bulk modulus showed a decreasing trend with increasing cation radius. However, the specific heat capacity and thermal expansion coefficient remained almost unchanged with increasing the radii of A and B cations. It is of interest to note that Ce on the B site significantly reduces the specific heat capacity and thermal expansion coefficient, which could have implications for annealing of radiation damage in cerate pyrochlores. The present results are consistent with the experimental measurements, which validates these potentials for simulation of dynamical processes, such as radiation damage, in pyrochlores.

computer simulation↗

Understanding the links between composition, polyhedral distortion, and luminescence properties in green-emitting β-Si 6–z Al z O z N 8–z :Eu 2+ phosphors

Inorganic phosphor materials play a crucial role in the creation of white light from blue and near-UV solid-state light-emitting diodes. Understanding the intricacies of the phosphor structure is key for setting the stage for improved, more efficient functionality. Average structure and coordination environment analysis of the robust and efficient green-emitting phosphor, β-SiAlON:Eu 2+ (β-Si 6–z Al z O z N 8–z Eu 0.009 ), is combined here with a range of property measurements to elucidate the role of Al content ( z ) in luminescence properties, including the red shift of emission and the thermal quenching of luminescence as a function of increasing Al content z . Average structure techniques reveal changes in polyhedral distortion with increasing z for the 9-coordinate Eu site in β-SiAlON:Eu 2+ . X-ray absorption near edge structure (XANES) is used to confirm that the majority of the activator Eu is in the Eu 2+ state, exhibiting the symmetry-allowed and efficient 4f 7 5d 0 → 4f 6 5d 1 transitions. As a result, room temperature and temperature-dependent luminescence indicate a curious increase in thermal stability with increasing z over a small range due to an increasing barrier for thermal ionization, which is correlated to an increase in the quantum yield of the phosphor.

36 MATERIALS SCIENCE↗

Enhanced yield-mobility products in hybrid halide Ruddlesden–Popper compounds with aromatic ammonium spacers

We show hybrid halide Ruddlesden–Popper compounds are related to three-dimensional hybrid AMX 3 perovskites (e.g. where A is a monovalent cation, M is a divalent metal cation, and X is a halogen) with the general formula L 2 A n–1 M n X 3n+1 where L is a monovalent spacer cation. The crystal structure comprises perovskite-like layers separated by organic cation spacers. Here two Ruddlesden–Popper compounds with a conjugated cation, 2-(4-biphenyl)ethylammonium (BPEA) prepared by solvothermal and solvent evaporation techniques are reported. The structures of the two compounds: (BPEA) 2 PbI 4 and (BPEA) 2 (CH 3 NH 3 )Pb 2 I 7 , were solved by X-ray crystallography. The aromatic rings of the BPEA groups are well-separated in the organic layers leading to optical properties comparable to n = 1 and 2 hybrid halide Ruddlesden–Popper compounds with simpler alkyl ammonium cations. The ambient stability of both compounds over time was also confirmed by powder X-ray diffraction. Finally, the transient photoconductance, measured by time-resolved microwave conductivity, show that the compounds have maximum yield-mobility products respectively of 0.07 cm 2 V –1 s –1 and 1.11 cm 2 V –1 s –1 for (BPEA) 2 PbI 4 and (BPEA) 2 (CH 3 NH 3 )Pb 2 I 7 , both slightly enhanced over what has been measured for compounds with simpler ( n -butylammonium) spacer cations.

36 MATERIALS SCIENCE↗

Exploring phase transitions and magnetoelectric coupling of epitaxial asymmetric multilayer heterostructures

Magnetoelectric (ME) heterostructures can exhibit higher magnetic and ferroelectric ordering temperatures along with large ME coupling compared to single-phase multiferroic materials. We synthesized Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN)/Ni 0.65 Zn 0.35 Fe 2 O 4 (NZFO)/Pb(Fe 0.5 Nb 0.5 )O 3 (PFN) multilayer heterostructures having dimensions of 40/10/40/10/40 nm. High quality epitaxial growth of these heterostructures was confirmed via X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns. These nanostructures show well saturated polarization (~52 μC cm -2 ) and magnetization (~62 emu cm -3 ) at room temperature (RT). The magnetic and ferroelectric transitions occur well above RT. These heterostructures exhibit relaxor behavior and undergo 2nd order ferroelectric phase transition. Magnetodielectric measurements show significant coupling between the magnetic and electrical order parameters at RT. These characteristics of the heterostructures make them suitable as potential candidates for ultra-low power memory, spintronics, and different multifunctional (micro)nanoscale device applications.

36 MATERIALS SCIENCE↗

Synthesis and structural properties of a 2D Zn( II ) dodecahydroxy- closo -dodecaborate coordination polymer

Here, in this work, we discuss the synthesis and characterization of a 2D coordination polymer composed of a dianionic perhydroxylated boron cluster, [B 12 (OH) 12 2– ], coordinated to Zn( II )—the first example of a transition metal-coordinated [B 12 (OH) 12 ] 2– compound. This material was synthesized via cation exchange from the starting cesium salt and then subjected to rigorous characterization prior to and after thermal activation. Numerous techniques, including XRD, FTIR, SEM, TGA, and solid-state NMR revealed a 2D coordination polymer composed of sheets of Zn( II ) ions intercalated between planes of boron clusters. The as-synthesized material was then evacuated of solvent via thermal treatment, and atomic-level changes from this transformation were elucidated through a combination of 1D and 2D solid-state NMR analyses of 11 B and 1 H nuclei, suggesting the full removal of coordinated solvent molecules. Evidence also suggested that [B 12 (OH) 12 2– ] can adjust its coordination to Zn( II ) in the solid-state through hemilability of its numerous –OH ligands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

“Breathing” organic cation to stabilize multiple structures in low-dimensional Ge-, Sn-, and Pb-based hybrid iodide perovskites

Low-dimensional hybrid inorganic–organic perovskites are excellent candidates for stable optoelectronic devices. The dimensionality of these perovskites depends largely on the organic and inorganic compositions, as well as the synthetic conditions. We report five new hybrid iodides, (ETU) 4 Ge 5 I 18 , (ETU)GeI 4 , (ETU)SnI 4 , (ETU)PbI 4 , and (ETU) 3 Pb 2 I 10 using only one type of organic cation, namely, S-(2-aminoethyl)isothiouronium (ETU). (ETU)GeI 4 and (ETU)SnI 4 belong to the (110)-oriented structure-type with “3 × 3” sawtooth corrugated layers and crystallize in a structure with the orthorhombic space group Pbca. (ETU) 4 Ge 5 I 18 crystallizes in a structure with the triclinic space group P$\bar{1}$with combining macron], featuring a 2D layered structure with combinations of corner, edge, and face-sharing [GeI 6 ] octahedra. For the Pb-based series, (ETU)PbI 4 has the conventional (100) – oriented 2D type whereas (ETU) 3 Pb 2 I 10 has a unique 0D structure. Remarkably, the unstable 2D orange-phase (ETU)PbI 4 transforms to a stable 0D yellow phase (ETU) 3 Pb 2 I 10 , accompanied by the reduction of the C–S–C angle of the organic cation ETU. The optical band gaps are largely regulated by the diverse types of structure and are in the range of 1.8 eV to 2.8 eV. (ETU)SnI 4 is the only material showing notable photoluminescence at room-temperature. Our work showcases the flexibility of the organic cation in determining the structural dimensionality and provides a new strategy in generating new hybrid materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Simultaneous enhancement of thermally activated delayed fluorescence and photoluminescence quantum yield via homoconjugation

A critical challenge facing thermally activated delayed fluorescence (TADF) is to facilitate rapid and efficient electronic transitions while ensuring a narrow singlet–triplet energy gap (ΔE ST ) in a single luminophore. We present a TADF-active iptycene that clearly demonstrates that homoconjugation can be harnessed as a viable design strategy towards answering this challenge. A homoconjugated analogue of an established quinoxaline-based TADF luminophore has been produced by fusing three of these luminophores together across a shared triptycene core. Homoconjugation was confirmed by electrochemistry, and as a direct consequence of this phenomenon we observed synergistic improvements to photoluminescence quantum yield (Φ PL ), radiative rate of singlet decay ($k^{S}_{r}$), delayed fluorescence lifetime (τ TADF ), and rate of reverse intersystem crossing (k rISC ), all while narrowing the ΔE ST . The enhancement is rationalised with TD-DFT calculations including spin–orbit coupling (SOC). A facile synthesis, the ubiquity of the pyrazine motif in state-of-the-art TADF materials of all colours, and the extent of the overall performance enhancement leads to a great potential for generality.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗