Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantification”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Quantification of transient stretch effects on kernel-vortex interactions in premixed methane-air flames

Relative flame speeds of time-dependent highly curved premixed methane-air flames (spark-ignited flame kernels) interacting with a laminar vortex have been quantified using high-speed chemiluminescence imaging, particle image velocimetry, and piezoelectric pressure measurements. The goals of this study are to improve fundamental understanding of transient stretch effects on highly curved premixed flames, to provide practical insight into the turbulent growth of spark-ignited flame kernels in internal combustion (IC) engines burning light hydrocarbon fuels, and to provide data for IC engine ignition and combustion model development. Lean and rich CH{sub 4}-O{sub 2}-N{sub 2} flames were tested ({phi}=0.64, 0.90, and 1.13, with nitrogen dilution to equalize the flame speeds (S{sub b}) in the absence of vortex interaction). Transient stretch rates were varied using three different vortex strengths, and the size of the flame kernel at the start of the vortex interaction controlled by time delay between ignition and vortex generation. Vortex interactions with small ({proportional_to}5 mm radius) flame kernels were found to increase burning rates for lean ({phi}=0.64) flame kernels substantially. Burning rates for rich ({phi}=1.13) flames were decreased, with total flame kernel extinction occurring in extreme cases. These small flame kernel-vortex interactions are dominated by transient stretch effects and thermodiffusive stability, in agreement with premixed flame theory. However, vortex interactions with larger methane-air flame kernels ({proportional_to}30 mm radius) led to slight flame speed enhancements for both lean and rich flame kernels, with the flame-vortex process dominated by increased flamefront area generated by vortex-induced flame wrinkling. (author)

33 ADVANCED PROPULSION SYSTEMS↗

The Structure and Purity of a Reference Dye Standard used for Quantification of C.I. Solvent Red 164 in Fuels

This research describes a comprehensive analytical approach to provide structure verification and purity determination for Morton Red 26. Studies presented in this paper, based on application of numerous traditional and advanced analytical techniques, provide definitive proof that Morton Red 26 and Solvent Red 26 are not chemically equivalent and, further, that Morton Red 26 and NIST #2037 have identical chemical structures, a result that stands in contrast to common perception. Additional analytical studies, again based on the application of numerous analytical methodologies, determined that Morton Red 26 was approximately 72 percent pure, a finding that stands in contrast to the 99 percent purity value certified by the supplier (Morton International). Possible explanations and implications are briefly discussed. Several of the Morton Red 26 impurities were tentatively identified, and a host of additional impurities were partially characterized by NMR, TLC, GC/MS, and HPLC/MS studies.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Explicit quantification of residence and flushing times in the Salish Sea using a sub-basin scale shoreline resolving model

The Salish Sea, located in the Pacific Northwest region of North America has complex currents and circulation features distributed over numerous interconnected deep basins with islands. Increased risk of exposure to oil spills and untreated wastewater from maritime emergencies and treatment plant failures have led to a need for quantifying residence and flushing characteristics at a sub-basin scale using a shoreline resolving hydrodynamic model. An unstructured grid model of the Salish Sea was developed using FVCOM with a ≈75-100m shoreline resolution. In addition to 7 tides and 23 salinity and temperature monitoring stations, an extensive currents data set from 135 stations collected over a span of three years was used for skill assessment and validation. Explicit forward computations were then conducted to define and quantify residence and flushing times in various sub-basins of interest using (a) Lagrangian particles and (b) Numerical/virtual dye experiments. The results in most basins show expected seasonal variability with longer flushing time associated with summer lower tides and lower freshwater inflows. However, contrary to expectation, flushing time is significantly longer in wintertime in large fjord-like basins such as Hood Canal (≈138 days), likely due to increased stratification and reduced mixing. The flushing time for the Puget Sound region of the Salish Sea is ≈115 days, while Georgia Basin is 240 days when analyzed as stand-alone basins with zero background concentrations. When examined as part of the flushing of the entire Puget Sound filled with virtual dye, the compounded flushing times for embedded sub-basins can be significantly longer in order of magnitudes and largely dictated by the flushing time of Puget Sound. The computed residence and flushing time scales tabulated over 36 sub-basins provide an improved understanding of water renewal in the system, informing pollution management actions.

54 ENVIRONMENTAL SCIENCES↗

Model Comparison and Uncertainty Quantification for Geologic Carbon Storage. The Sim-SEQ Initiative

Sim-SEQ is a model comparison initiative for geologic carbon storage (GCS). In Sim-SEQ, fifteen different modeling teams are developing conceptual models for flow and transport of an injected CO 2 plume at the Sim-SEQ study site (or the S-3 site) located near Cranfield, Mississippi. The objective of the project is to understand the sources of model uncertainty in GCS, and if possible, to quantify these uncertainties through comparison of the different conceptual models and also through comparison with observed data from the S-3 site. In this paper, we compare six different conceptual models of the S-3 site, and present a preliminary uncertainty analysis of these six models using a generalized linear model approach. We show that differences in model conceptualization and interpretation of site characterization data caus a significant range in predictions.

54 ENVIRONMENTAL SCIENCES↗

Life Cycle Assessment to support the quantification of the environmental impacts of an event

In recent years, several tools have been used to define and quantify the environmental impacts associated with an event; however, a lack of uniform approaches for conducting environmental evaluations has been revealed. The aim of this paper is to evaluate whether the Life Cycle Assessment methodology, which is rarely applied to an event, can be an appropriate tool for calculating the environmental impacts associated with the assembly, disassembly, and use phase of an event analysing in particular the components and the displays used to establish the exhibits. The aim is also to include the issues reported by ISO 20121:2012 involving the interested parties that can be monitored but also affected by the event owner, namely the event organiser, the workforce and the supply chain. A small event held in Northern Italy was selected as the subject of the research. The results obtained show that the main contributors are energy consumption for lighting and heating and the use of aluminium materials, such as bars for supporting the spotlights, carpet and the electronic equipment. A sensitivity analysis for estimating the effects of the impact assessment method chosen has also been conducted and an uncertainty analysis has been performed using the Monte Carlo technique. This study highlighted the importance of the energy consumed by heating and lighting on the environmental implications, and indicated that the preparation and assembly should always be considered when quantifying the environmental profile of an event. - Highlights: • LCA methodology, developed for products and services, is applied to an event. • A small event held in Northern Italy is analysed. • The main contributors are energy consumption and the use of aluminium and carpet. • Exhibition site preparation can have important environmental implications. • This study demonstrates the importance of the assembly, disassembly and use phase.

54 ENVIRONMENTAL SCIENCES↗

An integrated environmental and health performance quantification model for pre-occupancy phase of buildings in China

To comprehensively pre-evaluate the damages to both the environment and human health due to construction activities in China, this paper presents an integrated building environmental and health performance (EHP) assessment model based on the Building Environmental Performance Analysis System (BEPAS) and the Building Health Impact Analysis System (BHIAS) models and offers a new inventory data estimation method. The new model follows the life cycle assessment (LCA) framework and the inventory analysis step involves bill of quantity (BOQ) data collection, consumption data formation, and environmental profile transformation. The consumption data are derived from engineering drawings and quotas to conduct the assessment before construction for pre-evaluation. The new model classifies building impacts into three safeguard areas: ecosystems, natural resources and human health. Thus, this model considers environmental impacts as well as damage to human wellbeing. The monetization approach, distance-to-target method and panel method are considered as optional weighting approaches. Finally, nine residential buildings of different structural types are taken as case studies to test the operability of the integrated model through application. The results indicate that the new model can effectively pre-evaluate building EHP and the structure type significantly affects the performance of residential buildings.

54 ENVIRONMENTAL SCIENCES↗