Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Program management”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Calendar Year 2024 Underground Test Area Annual Sampling Letter Report, Nevada National Security Site, Nevada, Rev. 1

The Underground Test Area (UGTA) Sampling Plan for Corrective Action Units (CAUs) 101 and 102: Central and Western Pahute Mesa, Nevada National Security Site (NNSS), Nevada (referred to herein as “the Plan”) (DOE/EMNV, 2025) describes the approach for collecting and analyzing groundwater samples to meet the objectives of the U.S. Department of Energy (DOE), Environmental Management (EM) Nevada Program’s UGTA Activity. The Plan is designed to ensure compliance with the UGTA Quality Assurance Plan (QAP) (DOE/EMNV, 2024), and the Federal Facility Agreement and Consent Order (FFACO) (1996, as amended).

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Preferential Attraction of Oviposition-Ready Oriental Fruit Flies to Host Fruit Odor over Protein Food Odor

Olfaction plays a key role in the location of food and oviposition resources by tephritid fruit flies. Adult females, including oriental fruit fly, Bactrocera dorsalis, can sustain egg production throughout their lives provided they obtain sufficient protein. Thus, preferential attraction to food or oviposition sites (host fruit) will depend on a fly’s particular physiological state. In this study, laboratory bioassays were conducted with mature, mated B. dorsalis (provisioned protein and sugar ad libitum) to evaluate attraction to traps baited with torula yeast versus six host fruit sources (guava, guava juice, mango, orange, Surinam cherry, or white sapote). Females that preferred fruit laid a significant number of eggs around the trap entrance (average 405 eggs/fly), while almost no eggs were laid by females that preferred yeast (0.5 and 1.3 eggs/fly on two occasions). Similar results were observed in a bioassay using headspace extracts of guava juice and torula yeast, supporting olfactory-mediated responses. When individual females were allowed to oviposit in guava juice traps 0–24 h after a choice test, 45.8% of females that chose guava juice laid eggs (average 14.7 eggs/fly), compared with 27.5% that chose yeast (average 6.5 eggs/fly). Dissections indicated that females with a preference for guava juice had an egg load 2.4 times greater than females that preferred yeast. These results suggest there is an olfactory-based behavioral switch in preference from protein to host odors when female B. dorsalis are oviposition-ready. We discuss the implications of our findings for practical behavioral management and detection programs for B. dorsalis.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2015

Heat Pump Water Heaters: Controlled Field Research of Impact on Space Conditioning and Demand Response Characteristics

A new generation of heat pump water heaters (HPWH) has been introduced into the U.S. market that promises to provide significant energy savings for water heating. Many electric utilities are promoting their widespread adoption as a key technology for meeting energy conservation goals and reducing greenhouse gas emissions. There is, however, considerable uncertainty regarding the space conditioning impact of an HPWH installed in a conditioned space. There is also uncertainty regarding the potential for deployment of HPWHs in demand response (DR) programs to help manage and balance peak utility loads in a similar manner as conventional electric resistance water heaters (ERWH). To help answer these uncertainties, controlled experiments have been undertaken over 30 months in a matched pair of unoccupied Lab Homes located on the campus of the Pacific Northwest National Laboratory (PNNL) in Richland, Washington.

demand response↗
DOE OSTI2015

UseLATEX.cmake

UseLATEX.cmake is a collection of script functions and examples for building LaTeX documents. It simplifies the process of building LaTeX documents, which requires the execution of multiple programs and the management of several input files. UseLATEX.cmake also provides several options to customize the LaTeX build process.

Moreland, Kenneth↗
DOE OSTI2017

Quantifying the Impact of Vehicle and Motor Fuel Provisions from the Energy Policy Act on the Sustainability and Resilience of U.S. Cities: Preprint

The Energy Policy Act (EPAct) of 1992, with later amendments, was enacted with the goal of reducing U.S. petroleum consumption by building a core market for alternative fuels and vehicles. The U.S. Department of Energy manages three federal programs related to EPAct; the Sustainable Federal Fleets Program, the State and Alternative Fuel Provider Program, and Clean Cities. Federal agencies and State and Alternative Fuel Provider Fleets are required to submit annual reports that document their compliance with the legislation. Clean Cities is a voluntary program aimed at building partnerships and providing technical expertise to encourage cities to reduce petroleum use in transportation. This study reviews the evolution of these three programs in relation to alternative fuel and vehicle markets and private sector adoption of alternative fueled vehicles to assess the impact of the programs on reduction in petroleum use and greenhouse gas emissions both within the regulated fleets and through development of alternative fuel and vehicle markets. The increased availability of alternative fuels and use of alternative fuels in regulated fleets is expected to improve cities' ability to respond to and quickly recover from both local disasters and short- and long-term regional or national fuel supply interruptions. Our analysis examines the benefits as well as potential drawbacks of alternative fuel use for the resiliency of U.S. cities.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗
DOE OSTI2017

Integration of National Laboratory and Low-Activity Waste Pre-Treatment System Technology Service Providers - 16435

The National Laboratories are a critical partner and provide expertise in numerous aspects of the successful execution of the Direct-Feed Low Activity Waste Program. The National Laboratories are maturing the technologies of the Low-Activity Waste Pre-Treatment System (LAWPS) consistent with DOE Order 413.3B “Program and Project Management for the Acquisition of Capital Assets” expectations. The National Laboratories continue to mature waste forms, i.e. glass and secondary waste grout, for formulations and predictions of long-term performance as inputs to performance assessments. The working processes with the National Laboratories have been developed in procurements, communications, and reporting to support the necessary delivery-based technology support. The relationship continues to evolve from planning and technology development to support of ongoing operations and integration of multiple highly coordinated facilities.

Low-Activity Waste↗
DOE OSTI2018

Quantifying the Impact of Vehicle and Motor Fuel Provisions from the Energy Policy Act on the Sustainability and Resilience of U.S. Cities

The Energy Policy Act (EPAct) of 1992, with later amendments, was enacted with the goal of reducing U.S. petroleum consumption by building a core market for alternative fuels and vehicles. The U.S. Department of Energy manages three federal programs related to EPAct; the Sustainable Federal Fleets Program, the State and Alternative Fuel Provider Program, and Clean Cities. Federal agencies and State and Alternative Fuel Provider Fleets are required to submit annual reports that document their compliance with the legislation. Clean Cities is a voluntary program aimed at building partnerships and providing technical expertise to encourage cities to reduce petroleum use in transportation. This study reviews the evolution of these three programs in relation to alternative fuel and vehicle markets and private sector adoption of alternative fueled vehicles to assess the impact of the programs on reduction in petroleum use and greenhouse gas emissions both within the regulated fleets and through development of alternative fuel and vehicle markets. The increased availability of alternative fuels and use of alternative fuels in regulated fleets is expected to improve cities' ability to respond to and quickly recover from both local disasters and short- and long-term regional or national fuel supply interruptions. Our analysis examines the benefits as well as potential drawbacks of alternative fuel use for the resiliency of U.S. cities.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2019

Small Unmanned Aerial Systems (sUAS) on the NNSS White Paper

The Nevada National Security Site (NNSS) prides itself on being the premier outdoor, indoor, and underground national laboratory. It is the preferred location for experiments supporting the National Nuclear Security Administration’s nuclear weapons Stockpile Stewardship Programs, national defense programs, and national security research, development, and training programs, as well as vital programs of other federal agencies. Work at the NNSS supports the Stockpile Stewardship Program, Global and Homeland Security programs, and Environmental Management. The NNSS looks to incorporate safer work practices and continuous improvements. Unmanned Aerial Surveys (UAS) have already been implemented in areas off the NNSS for multiple uses. Using these best practices with systems catered to the NNSS would allow integration of new technology and would allow work at the NNSS to maintain the high level of quality already exhibited. The Management and Operating Contractor (M&O) has shown experience in multiple UAS platforms. Through the coordination and experience developed through these projects, the M&O can further improve the quality and cost effectiveness of services currently rendered and offer new services not currently available today. Several NNSS departments that could implement UAS technology are Emergency Response, Facility Management, Environmental Management, and Training. These departments would be able to improve their capabilities and expand personnel effectiveness with the inclusion of UASs and the information they provide.

61 RADIATION PROTECTION AND DOSIMETRY↗
DOE OSTI2019

Method and system for semantic metadata compression in a two-tier storage system using copy-on-write

Example embodiments of the present invention relate to a method, a system, and a computer program product for managing metadata. The method includes determining a common characteristic of metadata entries for a plurality of files in a directory of a file system and computing a representative metadata entry for the plurality of metadata entries according to the common characteristic of the metadata entries. The plurality of metadata entries in the file system then may be represented according to the computed representative metadata entry.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Geothermal Energy

This fact sheet describes geothermal energy and the Bureau of Land Management's geothermal program.

GEOTHERMAL ENERGY↗
DOE OSTI2022

TEA and LCA Assessments of H2 Production from Coal, Coal/Biomass, and Biomass

This presentation was made at the "Gasification Technology Status and Pathways for Net-Zero Carbon Economy Workshop" held on November 30, 2022. The presentation primarily focuses on TEA/LCA results that NETL has developed for coal gasification w/ & w/o CCS as well as net-zero greenhouse gas coal/biomass gasification. Full reporting of these cases is publicly available in the NETL report titled "Comparison of Commercial, State-of-the-Art, Fossil-Based Hydrogen Production Technologies," April 2022. Additionally, the presentation describes current NETL work in support of the U.S. Department of Energy (DOE) Office of Fossil Energy and Carbon Management (FECM) Gasification Program in the areas of TEA/LCA/Markets analysis of biomass/MSW/waste plastics gasification to achieve cost reductions for net-zero H2 production.

Lewis, Eric↗
DOE OSTI2013

A Retrospective Management Perspective on Nearly 20 Years of the Savannah River Site Citizen Advisory Board - 13078

The Department of Energy, Office of Environmental Management (DOE EM) program has invested in site specific advisory boards since 1994. These boards have served as a portal to the communities surrounding the DOE sites, provided a key avenue for public involvement, and have actively engaged in providing input and feedback that has informed clean up and priority decisions made by EM. Although the EM program has made considerable progress in completing its mission, work will continue for decades, including work at the Savannah River Site (SRS). It is reasonable to assume the advisory boards will continue in their role providing input and feedback to EM. The SRS Citizen Advisory Board (CAB) formed in 1994 and has issued 298 recommendations through September 2012. Although the effectiveness of the board is not measured by the number of recommendations issued, the recommendations themselves serve to illustrate the areas in which the CAB is particularly interested, and offer insight to the overall effectiveness of the CAB as a means for public participation in the EM decision making process. (authors)

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2013

Automated Groundwater Monitoring of Uranium at the Hanford Site, Washington - 13116

An automated groundwater monitoring system for the detection of uranyl ion in groundwater was deployed at the 300 Area Industrial Complex, Hanford Site, Washington. The research was conducted to determine if at-site, automated monitoring of contaminant movement in the subsurface is a viable alternative to the baseline manual sampling and analytical laboratory assay methods currently employed. The monitoring system used Arsenazo III, a colorimetric chelating compound, for the detection of the uranyl ion. The analytical system had a limit of quantification of approximately 10 parts per billion (ppb, μg/L). The EPA's drinking water maximum contaminant level (MCL) is 30 ppb [1]. In addition to the uranyl ion assay, the system was capable of acquiring temperature, conductivity, and river level data. The system was fully automated and could be operated remotely. The system was capable of collecting water samples from four sampling sources, quantifying the uranyl ion, and periodically performing a calibration of the analytical cell. The system communications were accomplished by way of cellular data link with the information transmitted through the internet. Four water sample sources were selected for the investigation: one location provided samples of Columbia River water, and the remaining three sources provided groundwater from aquifer sampling tubes positioned in a vertical array at the Columbia River shoreline. The typical sampling schedule was to sample the four locations twice per day with one calibration check per day. This paper outlines the instrumentation employed, the operation of the instrumentation, and analytical results for a period of time between July and August, 2012. The presentation includes the uranyl ion concentration and conductivity results from the automated sampling/analysis system, along with a comparison between the automated monitor's analytical performance and an independent laboratory analysis. Benefits of using the automated system as an alternative to traditional sample collection and analysis includes the following: - Field observations that provide more characterization information than is possible using traditional monitoring methods. - Potentially significant reductions in labor and analytical costs if traditional methods are complemented by automated systems. - The reduced cost of acquiring samples will allow for more frequent collection of samples that may be automatically introduced into real-time graphical flux programs allowing site managers to observe the changes in contaminant concentrations during remediation projects and across discrete river stage events. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2015

Disposing of waste package with respect to physico-chemical characteristics - 15041

The waste inventory to be taken into account for the design of the Cigeo project is defined in the industrial program for waste management established in cooperation between nuclear operators (EDF, AREVA, CEA) and Andra. This waste inventory has been constituted with a list of different families of radioactive waste packages from High Level Waste (HLW) to Intermediate Level Long-lived Waste (IL-LLW). IL-LLW include a large variety of items such as structural elements from fuel assemblies (cladding from the fuel rods called 'hulls', end pieces called 'end caps' and assembly spacer grids, etc.), sludge from effluent treatment or miscellaneous equipment (filters, pumps, etc.). Most ILLW (except solidified sludges) are basically metallic but organic and inorganic components such as plastics (cellulose, PVC...) and salts may also be included. The rules used for designing Cigeo are based on the separation of waste having different physico-chemical characteristics in different cells. However it could be possible to dispose of waste packages with different physico-chemical characteristics in the same cell if we can demonstrate that a type of waste does not generate significant physico-chemical perturbations on other co-stored families. The first step of our analysis has been the identification of categories of materials present in waste likely to interact with each other. The second step consisted in analysing qualitatively the physico-chemical interactions between these materials. In the third step, we defined criteria allowing evaluation of the consequences of these interactions on (i) gas production (mainly H{sub 2}), (ii) radionuclide release and transfer and (iii) degradation of concrete components of the disposal cell. We built then a table allowing qualitative comparison of the consequences of the interactions between the materials types defined in the first step. The conclusion of this study shows that it is necessary to pay a very careful attention before disposing of waste packages containing organic components nearby waste packages containing actinides radionuclides. The geochemical phenomena coupling must also be quantitatively evaluated so as to analyse possible interaction processes between the released organic compounds and the cementitious components of the cells, the near-field clay-stone and the radionuclides migration. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

Integration of National Laboratory and Low-Activity Waste Pretreatment System Technology Service Providers - 16435

The National Laboratories are a critical partner and provide expertise in numerous aspects of the successful execution of the Direct-Feed Low Activity Waste Program. The National Laboratories are maturing the technologies of the Low-Activity Waste Pretreatment System consistent with DOE Order 413.3B, 'Program and Project Management for the Acquisition of Capital Assets', expectations. The National Laboratories continue to mature waste forms, i.e., glass and secondary waste grout, for formulations and predictions of long-term performance as inputs to performance assessments. The working processes with the National Laboratories have been developed in procurements, communications, and reporting to support the necessary delivery-based technology support. The relationship continues to evolve from planning and technology development to support of ongoing operations and integration of multiple highly coordinated facilities. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2016

The Impact of Furnace-Testing on the Microstructure of an Irradiated U-Mo Fuel Plate

The Material Management and Minimization Program (formerly known as the Reduced Enrichment for Research and Test Reactor Program) is responsible for converting research reactors that use highly enriched uranium (HEU) fuels to ones that use low-enriched uranium (LEU) fuels. As part of the development of LEU fuels, a variety of irradiation experiments are being conducted using the Advanced Test Reactor. In addition to the reactor tests, there is interest in generating information about the transient behavior of irradiated fuel plates. For example, it is of interest to determine the temperature at which a blister will form on the surface of a fuel plate, due to fission gas release from the fuel meat, for a particular fuel plate design. Since in-pile testing to determine the 'blister threshold' (the temperature where a blister forms on the surface of a fuel plate) in plate-type fuel is very difficult and expensive and has historically been deemed impractical for fuel qualification testing, an out-of-pile 'blister test' has been developed and employed. This post-irradiation blister anneal test was developed as a conservative simulation of in-pile behavior and has been routinely used for many research reactor fuel designs currently in use. In this test, the irradiated fuel plate is inserted into a furnace at a given temperature, soaked for a period of time, and removed for inspection. If no visible blisters appear, the furnace temperature is increased, and the plate is soaked and inspected again. This process continues until blisters are observed. Recently, a section from an irradiated U-7Mo dispersion fuel plate with Al-4043 matrix, which has a nominal composition of 4.81Si-0.20Fe-0.14Ti-0.16Cu-0.01Cr 0.01Mn-bal Al, was tested in a furnace located in the Hot Fuel Examination Facility, located at the Idaho National Laboratory, up to 500 deg. C, at which point blisters were observed on the surface of the fuel plate section. A sample near the blistered region of the fuel plate section was then characterized using scanning electron (SEM) and transmission electron microscopy (TEM). This paper discusses the results of this characterization and how they compare to those generated for a similar sample characterized after fabrication but before irradiation and for a sample characterized after irradiation but before furnace testing. One goal of this work is to identify the changes in the microstructure during blister testing that contribute to the eventual release of fission gas that results in the development of blisters. SEM analysis of the furnace-tested sample showed that in some locations of the U-7Mo particles, Al-4043 matrix constituents (primarily Si) had penetrated the microstructure along grain boundaries. This provided potential pathways for increased fission gas migration in the fuel meat microstructure during the furnace heating process. Some attack of these boundaries was also observed in the as-fabricated U-7Mo/Al-4043 sample, but there appeared to be additional attack during the furnace annealing. Besides the changes observed in grain boundary features, the TEM analysis showed that the fission gas bubbles that are typically present in the intra-granular regions of the as-irradiated U-7Mo microstructure as a fission gas bubble superlattice had changed in size, morphology, and distribution. The result of this may be an increase in the mobility of the fission gas in intra-granular regions of the fuel. The complete implications of the changes in fission gas morphology and distribution in the fuel meat microstructure and their impact on blistering continues to be investigated. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2018

Conservation management and ecosystem services in midwestern United States agricultural systems

The recognition that agricultural systems provide services beyond food production has motivated federal legislation and associated programs that promote sustainable management and conservation of productive working lands. This study evaluates the ability of the USDA Natural Resources Conservation Service's (NRCS) Conservation Measurement Tool (CMT), which has been used to determine eligibility for enrollment in the Conservation Stewardship Program, to reflect changes in ecosystem services resulting from the use of conservation management practices on croplands. This work evaluates four macroconcerns or outcomes (soil erosion, soil quality, water quality, and air quality) that are quantified within the tool by comparing CMT scores tabulated according to practices reported by farmers involved in grain producing operations in the US Midwest with soil health measures (dynamic soil properties [DSPs]) determined on 72 Illinois farm fields. Three management practice categories-Conventional, Conservation, and Organic-were evaluated. The CMT identified significant differences among management categories, and scores ranked consistently higher for Organic than Conventional or Conservation systems. Direct analysis of DSPs suggested that there were relatively small differences among soil health indicators measured on farms under varied management; this implies that the CMT might be overemphasizing the influence of selected management practices. The evaluation of multivariate relationships between the practices scored in the CMT and DSPs revealed that soil properties like soil pH and particulate organic matter-carbon (POM-C) can be used to improve the accuracy of the tool. They also show how relationships between questions (practices) and outcomes suggested by DSPs vary among farming categories and suggest this type of practice-based tool should be adapted by embedding factors to scale farming systems or, preferably, by adding questions that better describe important factors (e.g., plant productivity and fertilizer timing, rate, and form of application) and their interactions with other factors known to influence specific outcomes. This work shows how field data describing practices, properties, and outcomes can be used to statistically evaluate and refine conservation scoring tools.

conservation measurement tool↗
DOE OSTI2013

Scalable PGAS Metadata Management on Extreme Scale Systems

Programming models intended to run on exascale systems have a number of challenges to overcome, specially the sheer size of the system as measured by the number of concurrent software entities created and managed by the underlying runtime. It is clear from the size of these systems that any state maintained by the programming model has to be strictly sub-linear in size, in order not to overwhelm memory usage with pure overhead. A principal feature of Partitioned Global Address Space (PGAS) models is providing easy access to global-view distributed data structures. In order to provide efficient access to these distributed data structures, PGAS models must keep track of metadata such as where array sections are located with respect to processes/threads running on the HPC system. As PGAS models and applications become ubiquitous on very large transpetascale systems, a key component to their performance and scalability will be efficient and judicious use of memory for model overhead (metadata) compared to application data. We present an evaluation of several strategies to manage PGAS metadata that exhibit different space/time tradeoffs. We use two real-world PGAS applications to capture metadata usage patterns and gain insight into their communication behavior.

Global Arrays↗