Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Plasmons”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Photo-Swing CO2 Capture Using a Branched Polyethylenimine As Sorbents and TiN Light Absorber

Using branched polyethylenimine as the sorbent material for dilute CO2 capture, a photo-swing method is demonstrated in an industrially relevant support architecture using titanium nitride (TiN) nanosized light absorbers coupled with low-power LEDs with irradiances up to 420 mW cm-2. The photo-swing desorption process is applied to dry and humid streams of 400 ppm CO2 diluted in N2. Consistent with known sorption mechanisms for aminopolymers, humid CO2 streams increased the CO2 uptake, in our case by ~30%. The photo-swing CO2 capture desorbed ~83% and ~100% CO2 compared to thermally-driven desorption over the same period for a dry and humid CO2 stream, respectively. The photo-swing CO2 capture exhibits robust performance over >90 cycles without significant signs of photo(thermal) induced sorbent degradation. This work lays the groundwork for photo-swing DAC technology as a scalable, energy-efficient solution for CO2 capture, well-suited for modular systems in remote locations utilizing intermittent renewable energy sources.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Improved temporal resolution in ultrafast electron diffraction measurements through THz compression and time-stamping

We present an experimental demonstration of ultrafast electron diffraction (UED) with THz-driven electron bunch compression and time-stamping that enables UED probes with improved temporal resolution. Through THz-driven longitudinal bunch compression, a compression factor of approximately four is achieved. Moreover, the time-of-arrival jitter between the compressed electron bunch and a pump laser pulse is suppressed by a factor of three. Simultaneously, the THz interaction imparts a transverse spatiotemporal correlation on the electron distribution, which we utilize to further enhance the precision of time-resolved UED measurements. We use this technique to probe single-crystal gold nanofilms and reveal transient oscillations in the THz near fields with a temporal resolution down to 50 fs. These oscillations were previously beyond reach in the absence of THz compression and time-stamping.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

A graphene-based magnetoplasmonic metasurface for actively tunable transmission and polarization rotation at terahertz frequencies

The rise of terahertz (THz)-based technologies has prompted intense interest in methods for manipulating the properties of THz radiation. In this Letter, we experimentally demonstrate a graphene micro-ribbon-based metasurface that allows us to tailor and dynamically tune the transmission and polarization rotation spectra of impinging THz pulses. This is achieved by controlling the geometry of the ribbon pattern and the applied DC magnetic field, both of which strongly influence the magnetoplasmonic response of the metasurface. The properties of the metasurface can be accurately modeled using an effective medium approach that considers the capacitive interaction of the ribbons resulting from the THz electric field. Furthermore, our results highlight the promise of graphene-based THz devices that leverage the strongly enhanced light–matter interactions resulting from patterning.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-resolution inelastic x-ray scattering at the high energy density scientific instrument at the European X-Ray Free-Electron Laser

We introduce a setup to measure high-resolution inelastic x-ray scattering at the High Energy Density scientific instrument at the European X-Ray Free-Electron Laser (XFEL). The setup uses the Si (533) reflection in a channel-cut monochromator and three spherical diced analyzer crystals in near-backscattering geometry to reach a high spectral resolution. An energy resolution of 44 meV is demonstrated for the experimental setup, close to the theoretically achievable minimum resolution. The analyzer crystals and detector are mounted on a curved-rail system, allowing quick and reliable changes in scattering angle without breaking vacuum. The entire setup is designed for operation at 10 Hz, the same repetition rate as the high-power lasers available at the instrument and the fundamental repetition rate of the European XFEL. Among other measurements, it is envisioned that this setup will allow studies of the dynamics of highly transient laser generated states of matter.

47 OTHER INSTRUMENTATION↗
DOE OSTI2020

Understanding the chemical contribution to the enhancement mechanism in SERS: Connection with Hammett parameters

The enhancement mechanism due to the molecule-surface chemical interaction in surface-enhanced Raman scattering (SERS) has been characterized using a theoretical approach based on time dependent density functional theory. This includes a systematic study of the chemical mechanism (CM) to the SERS enhancement for halogen substituted benzenethiols interacting with a silver cluster. Changing the halogen on benzenethiol enables us to systematically modulate interactions between the benzenethiol ring and the metal cluster. We observe a decrease in the CM enhancement factor with an increase in atomic number of the halogen for para- substitutions. For meta- substitutions, there is no such trend. However, the results scale linearly with the Hammett parameters for both meta and para halogens, which provides an important predictive tool for interpreting chemical enhancements. We also study the effect of solvation on the CM, showing that there is a systematic increase in enhancement with increasing solvent dielectric constant. As a result, the correlation of CM with other properties, such as the amount of charge transfer between adsorbate and metal, or the excitation energies of charge transfer states, is much less predictive than the Hammett parameter correlation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Theory of molecular emission power spectra. I. Macroscopic quantum electrodynamics formalism

In this work, we study the emission power spectrum of a molecular emitter with multiple vibrational modes in the framework of macroscopic quantum electrodynamics. The theory we present is general for a molecular spontaneous emission spectrum in the presence of arbitrary inhomogeneous, dispersive, and absorbing media. Moreover, the theory shows that the molecular emission power spectra can be decomposed into the electromagnetic environment factor and lineshape function. In order to demonstrate the validity of the theory, we investigate the lineshape function in two limits. In the incoherent limit (single molecules in a vacuum), the lineshape function exactly corresponds to the Franck–Condon principle. In the coherent limit (single molecules strongly coupled with single polaritons or photons) together with the condition of high vibrational frequency, the lineshape function exhibits a Rabi splitting, the spacing of which is exactly the same as the magnitude of exciton–photon coupling estimated by our previous theory [S. Wang et al., J. Chem. Phys. 151, 014105 (2019)]. Finally, we explore the influence of exciton–photon and electron–phonon interactions on the lineshape function of a single molecule in a cavity. The theory shows that the vibronic structure of the lineshape function does not always disappear as the exciton–photon coupling increases, and it is related to the loss of a dielectric environment.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Demonstration of a laser-driven, narrow spectral bandwidth x-ray source for collective x-ray scattering experiments

X-ray Thomson scattering (XRTS) is a powerful diagnostic technique that involves an x-ray source interacting with a dense plasma sample, resulting in a spectrum of elastically and inelastically scattered x-rays. Depending on the plasma conditions, one can measure a range of parameters from the resulting spectrum, including plasma temperature, electron density, and ionization state. To achieve sensitivity to collective electron oscillations, XRTS measurements require limited momentum transfer where the spectral separation of elastic and inelastic scattering is small. Such measurements require an x-ray probe source with a narrow bandwidth in order to reduce the spectral overlap between scattering contributions, allowing for the different features to be more precisely deconvolved. In this investigation, we discuss the theory behind how the bandwidth for a common XRTS probe, Zn He-α emission at 9 keV, can be reduced using a Cu K-edge filter.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Light extraction in tandem organic light emitting diodes

Since the invention of organic light emitting diodes (OLEDs), great research efforts have been dedicated to improving their efficiency and lifetime. For high-brightness applications, tandem OLED structures have advantages because of the lower current densities required to achieve high brightness. With the successful development of highly efficient charge generation layers, high brightness tandem OLEDs are used in displays and lighting. However, the major challenge for tandem OLEDs is the low light extraction efficiency, because about 50% of the light is trapped inside the device as waveguide modes. In this Perspective, we first review the recent works done on light extraction, analyze different waveguide mode extraction structures, and then identify the key factors determining the extraction efficiencies in tandem OLEDs.

42 ENGINEERING↗
DOE OSTI2022

Charge density wave activated excitons in TiSe 2 –MoSe 2 heterostructures

Layered materials enable the assembly of a new class of heterostructures where lattice-matching is no longer a requirement. Interfaces in these heterostructures therefore become a fertile ground for unexplored physics as dissimilar phenomena can be coupled via proximity effects. In this article, we identify an unexpected photoluminescence (PL) peak when MoSe 2 interacts with TiSe 2 . A series of temperature-dependent and spatially resolved PL measurements reveal that this peak is unique to the TiSe 2 –MoSe 2 interface, is higher in energy compared to the neutral exciton, and exhibits exciton-like characteristics. The feature disappears at the TiSe 2 charge density wave transition, suggesting that the density wave plays an important role in the formation of this new exciton. We present several plausible scenarios regarding the origin of this peak that individually capture some aspects of our observations but cannot fully explain this feature. These results therefore represent a fresh challenge for the theoretical community and provide a fascinating way to engineer excitons through interactions with charge density waves.

36 MATERIALS SCIENCE↗
DOE OSTI2022

A case study of using x-ray Thomson scattering to diagnose the in-flight plasma conditions of DT cryogenic implosions

The design of inertial confinement fusion ignition targets requires radiation-hydrodynamics simulations with accurate models of the fundamental material properties (i.e., equation of state, opacity, and conductivity). Validation of these models is required via experimentation. A feasibility study of using spatially integrated, spectrally resolved, x-ray Thomson scattering measurements to diagnose the temperature, density, and ionization of the compressed DT shell of a cryogenic DT implosion at two-thirds convergence was conducted. Synthetic scattering spectra were generated using 1D implosion simulations from the LILAC code that were post processed with the x-ray scattering model, which is incorporated within SPECT3D. Analysis of two extreme adiabat capsule conditions showed that the plasma conditions for both compressed DT shells could be resolved.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2022

Metasurfaces for photonic devices

Notably, metasurfaces have attracted significant attention owing to their broad capability to achieve exotic electromagnetic responses, and their potential as optical devices for wavefront control. Wide ranging materials may be used to form metasurfaces including noble and non-noble metals, oxides, ceramics, phase change materials, and semiconductors, permitting versatile and reconfigurable properties ideal for applications. In particular, applications that affect the science and technology of light—i.e., photonics—are of interest and will continue to grow in importance as our society becomes more digitally connected, but yet environmentally conscious.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Toward using collective x-ray Thomson scattering to study C–H demixing and hydrogen metallization in warm dense matter conditions

The insulator–metal transition in liquid hydrogen is an important phenomenon to understand the interiors of gas giants, such as Jupiter and Saturn, as well as the physical and chemical behavior of materials at high pressures and temperatures. Here, the path toward an experimental approach is detailed based on spectrally resolved x-ray scattering, tailored to observe and characterize hydrogen metallization in dynamically compressed hydrocarbons in the regime of carbon–hydrogen phase separation. With the help of time-dependent density functional theory calculations and scattering spectra from undriven carbon samples collected at the European x-ray Free-Electron Laser Facility (EuXFEL), we demonstrate sufficient data quality for observing C–H demixing and investigating the presence of liquid metallic hydrogen in future experiments using the reprated drive laser systems at EuXFEL.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2025

Statistical inference of collision frequencies from x-ray Thomson scattering spectra

Thomson scattering spectra measure the response of plasma particles to incident radiation. In warm dense matter, which is opaque to visible light, x-ray Thomson scattering (XRTS) enables a detailed probe of the electron distribution and has been used as a diagnostic for electron temperature, density, and plasma ionization. In this work, we examine the sensitivities of inelastic XRTS signatures to modeling details, including the dynamic collision frequency and the electronic density of states. Applying verified Monte Carlo inversion methods to dynamic structure factors obtained from time-dependent density functional theory, we assess the utility of XRTS signals as a way to inform the dynamic collision frequency, especially its direct-current limit, which is directly related to the electrical conductivity.

Collision frequency↗
DOE OSTI2025

Polariton spectra under the collective coupling regime. II. 2D non-linear spectra

In our previous work [Mondal et al., J. Chem. Phys. 162, 014114 (2025)], we developed several efficient computational approaches to simulate exciton–polariton dynamics described by the Holstein–Tavis–Cummings (HTC) Hamiltonian under the collective coupling regime. Here, we incorporated these strategies into the previously developed Lindblad-partially linearized density matrix (⁠$\mathscr{L}$-PLDM) approach for simulating 2D electronic spectroscopy (2DES) of exciton–polariton under the collective coupling regime. In particular, we apply the efficient quantum dynamics propagation scheme developed in Paper I to both the forward and the backward propagations in the PLDM and develop an efficient importance sampling scheme and graphics processing unit vectorization scheme that allow us to reduce the computational costs from $\mathscr{O}$($\mathscr{K}$ 2 )$\mathscr{O}$(T 3 ) to $\mathscr{O}$($\mathscr{K}$)$\mathscr{O}$(T 0 ) for the 2DES simulation, where $\mathscr{K}$ is the number of states and T is the number of time steps of propagation. As a result, we further simulated the 2DES for an HTC Hamiltonian under the collective coupling regime and analyzed the signal from both rephasing and non-rephasing contributions of the ground state bleaching, excited state emission, and stimulated emission pathways.

2D non-linear spectra↗
DOE OSTI2025

Photothermoelectric effect in cadmium arsenide thin films for unbiased, mid-infrared photodetection

Mid-infrared photodetectors that can operate at room temperature are of great interest for a wide range of applications. Here, we demonstrate unbiased, mid-infrared (10.4 μm) photodetection in epitaxial thin films of the three-dimensional Dirac semimetal cadmium arsenide (Cd 3 As 2 ), which are grown on a III–V heterostructure. We show that the photocurrent response of planar metal–Cd 3 As 2 –metal devices is consistent with the photothermoelectric effect, which is due to a temperature gradient that develops under asymmetric illumination of the device. We show that the photoresponsivity of Cd 3 As 2 channel devices is an order of magnitude greater than devices with a III–V semiconductor channel, attesting to the excellent thermoelectric properties of Cd 3 As 2 and promising efficient unbiased, room-temperature mid-infrared photodetection.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Analytic rate theory of polariton relaxation that explains long polariton lifetime

Hybridization of a molecular exciton with a quantized photon creates a polariton. Despite extensive experimental investigations, the apparent lifetime of the exciton–polariton is not well-understood. For this work, we examined the steady-state population dynamics for a Holstein–Tavis–Cumming Hamiltonian to illuminate the long-term polaritonic dynamics and lifetime of the exciton–polariton in an optical cavity. For a realistic description of polariton relaxation, cavity loss and various exciton decay channels are included in the model. We found that in the presence of weak but finite exciton loss, the apparent lifetime of the lower polariton coincides with the out-of-cavity exciton lifetime and is independent of cavity-matter detuning. This is a simple explanation for the experimentally observed lifetimes for exciton polaritons and theoretically justifies the dark state reservoir hypothesis. Furthermore, if the upper polariton is initially populated, the system reaches the steady state very quickly, leading to single-exponential polariton relaxation. Starting from the lower polariton leads to a longer pre-steady-state time period, leading to double-exponential relaxation. Finally, we considered the effect of site orientational disorders and the exciton frequency disorderers. Under the collective limit, the effects of this disorder can be included in Fermi’s golden rule population dynamics without explicit sampling. For the exciton energy disorders, numerical calculations are needed. Our theoretical framework is applicable to interpret exciton–polariton experiments, especially related to the measured apparent lifetime of polaritons.

Chemical dynamics↗
DOE OSTI2026

Quantum kinetic modeling of KEEN waves in a warm-dense regime

We report the first fully kinetic, quantum study of kinetic electrostatic electron nonlinear (KEEN) waves, showing that quantum diffraction systematically erodes the classical trapping mechanism, narrows harmonic locking to the fundamental, and hastens post-drive decay. Electrons are evolved with a second-order Strang-split 1D1V Wigner–Poisson solver that couples conservative semi-Lagrangian WENO advection to an analytic Fourier space update for the non-local Wigner term, while ions remain classical. We focus on collisionless dynamics in a weakly coupled regime, providing a controlled baseline before collisional extensions. Short, frequency-tuned ponderomotive pulses drive KEEN formation in a uniform Maxwellian plasma; as the dimensionless quantum parameter H rises from the classical limit to values relevant to warm-dense matter, doped semiconductors, and 2D electron systems, the drive threshold increases, higher harmonics are damped, trapped electron vortices diffuse, and the subplasma electrostatic energy relaxes to a lower stationary level, as confirmed by continuous wavelet analysis. These microscopic changes carry macroscopic weight. Ignition-scale capsules now compress matter to regimes where the electron de Broglie wavelength rivals the Debye length, making classical kinetic descriptions insufficient. By extending KEEN physics into this quantum domain, our results offer a potential diagnostic of non-equilibrium electron dynamics for next-generation inertial-confinement designs and high-energy-density platforms, indicating that predictive fusion modeling may benefit from the integration of kinetic fidelity with quantum effects.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2020

Unraveling intrinsic correlation effects with angle-resolved photoemission spectroscopy

Interaction effects can change materials properties in intriguing ways, and they have, in general, a huge impact on electronic spectra. In particular, satellites in photoemission spectra are pure many-body effects, and their study is of increasing interest in both experiment and theory. However, the intrinsic spectral function is only a part of a measured spectrum, and it is notoriously difficult to extract this information, even for simple metals. Our joint experimental and theoretical study of the prototypical simple metal aluminum demonstrates how intrinsic satellite spectra can be extracted from measured data using angular resolution in photoemission. A nondispersing satellite is detected and explained by electron–electron interactions and the thermal motion of the atoms. Additional nondispersing intensity comes from the inelastic scattering of the outgoing photoelectron. The ideal intrinsic spectral function, instead, has satellites that disperse both in energy and in shape. Theory and the information extracted from experiment describe these features with very good agreement.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗