Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Photocurrent”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Ultra-violet absorption induced modifications in bulk and nanoscale electrical transport properties of Al-doped ZnO thin films

Using conductive atomic force microscopy and Kelvin probe force microscopy, we study local electrical transport properties in aluminum-doped zinc oxide (ZnO:Al or AZO) thin films. Current mapping shows a spatial variation in conductivity which corroborates well with the local mapping of donor concentration (∼10{sup 20 }cm{sup −3}). In addition, a strong enhancement in the local current at grains is observed after exposing the film to ultra-violet (UV) light which is attributed to persistent photocurrent. Further, it is shown that UV absorption gives a smooth conduction in AZO film which in turn gives rise to an improvement in the bulk photoresponsivity of an n-AZO/p-Si heterojunction diode. This finding is in contrast to the belief that UV absorption in an AZO layer leads to an optical loss for the underneath absorbing layer of a heterojunction solar cell.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

GaAs quantum dot solar cell under concentrated radiation

Effects of concentrated solar radiation on photovoltaic performance are investigated in well-developed GaAs quantum dot (QD) solar cells with 1-Sun efficiencies of 18%–19%. In these devices, the conversion processes are enhanced by nanoscale potential barriers and/or AlGaAs atomically thin barriers around QDs, which prevent photoelectron capture to QDs. Under concentrated radiation, the short circuit current increases proportionally to the concentration and the open circuit voltage shows the logarithmic increase. In the range up to hundred Suns, the contributions of QDs to the photocurrent are proportional to the light concentration. The ideality factors of 1.1–1.3 found from the V{sub OC}-Sun characteristics demonstrate effective suppression of recombination processes in barrier-separated QDs. The conversion efficiency shows the wide maximum in the range of 40–90 Suns and reaches 21.6%. Detailed analysis of I-V-Sun characteristics shows that at low intensities, the series resistance decreases inversely proportional to the concentration and, at ∼40 Suns, reaches the plateau determined mainly by the front contact resistance. Improvement of contact resistance would increase efficiency to above 24% at thousand Suns.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Combined Au-plasmonic nanoparticles with mesoporous carbon material (CMK-3) for photocatalytic water splitting

The conventional TiO{sub 2} photoelectrode for water splitting was integrated with ordered mesoporous carbon material (CMK-3) and Au metal nanoparticles (NPs) to improve the photocatalytic efficiency under visible light irradiation. Compared to TiO{sub 2}, Au/TiO{sub 2}-CMK-3 photoelectrode demonstrated over two orders of magnitude enhancement of photocurrent under 532 nm laser irradiation due to the generation of hot electron and near field from Au NPs. Furthermore, the improvement of free carrier transport and additional long-wavelength absorption can be achieved by exploiting the superior conductivity and blackbody-like property of CMK-3. This proposed enhancement mechanism was proved by the measurements of photoluminescence emission spectrum and electrochemical impedance spectroscopy.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Influence of silver doping on surface defect characteristics of TiO{sub 2}

In the present work, we proposed a novel silver doped TiO{sub 2} polyethylene conjugated films to improve the performance of DSSCs. Oxides nanoparticles dispersed in a semiconducting polymer form the active layer of a solar cell. Localized surface plasmon resonance effects associated with spatially dispersed silver (Ag) nanoparticles can be exploited to enhance the light-harvesting efficiency, the photocurrent density and the overall light-to electrical-energy-conversion efficiency of high-area DSSCs based TiO{sub 2} photoanodes. Silver doped titanium dioxide (TiO{sub 2}:Ag) is prepared by sol-gel technique and deposited on fluorine doped indium oxide (FTO) coated glass substrates by using doctor blade technique at 550°C from aqueous solutions of titanium butoxide and silver nitrate precursors. The effect of Ag doping on electrical properties of films is studied. The Ag-TiO{sub 2} films are about 548 times more photosensitive as compare to the pure TiO{sub 2} sample. The presence of metallic Ag nanoparticles and oxygen vacancy on the surface of TiO{sub 2} nanoparticles promotes the separation of photogenerated electron-hole pairs and thus enhances the photosensitivity. Photoconduction mechanism of all prepared samples is investigated by performing transient photoconductivity measurements on TiO{sub 2} and Ag-TiO{sub 2} films keeping intensity of light constant.

36 MATERIALS SCIENCE↗

Effect of 50MeV Li{sup 3+} ion irradiation on structural, optical and electrical properties of amorphous Se{sub 95}Zn{sub 5} thin films

Present work focuses on the effect of swift heavy ion (SHI) irradiation of 50MeV Li{sup 3+} ions by varying the fluencies in the range of 1×10{sup 12} to 5×10{sup 13} ions/cm{sup 2} on the morphological, structural, optical and electrical properties of amorphous Se{sub 95}Zn{sub 5} thin films. Thin films of ~250nm thickness were deposited on cleaned glass substrates by thermal evaporation technique. X-ray diffraction (XRD) analysis shows the pristine thin film of Se{sub 95}Zn{sub 5} growsin hexagonal phase structure. Also it was found that the small peak observed in XRD spectra vanishes after SHI irradiation indicates the defects of the material increases. The optical parameters: absorption coefficient (α), extinction coefficient (K), refractive index (n) optical band gap (E{sub g}) and Urbach’s energy (E{sub U}) are determined from optical absorption spectra data measured from spectrophotometry in the wavelength range 200-1000nm. It was found that the values of absorption coefficient, refractive index and extinction coefficient increases while the value optical band gap decreases with the increase of ion fluence. This post irradiation change in the optical parameters was interpreted in terms of bond distribution model. Electrical properties such as dc conductivity and temperature dependent photoconductivity of investigated thin films were carried out in the temperature range 309-370 K. Analysis of data shows activation energy of dark current is greater as compared to activation energy photocurrent. The value of activation energy decreases with the increase of ion fluence indicates that the defect density of states increases.Also it was found that the value of dc conductivity and photoconductivity increases with the increase of ion fluence.

36 MATERIALS SCIENCE↗

Gate-controlled terahertz single electron photovoltaic effect in self-assembled InAs quantum dots

We have observed a terahertz (THz) induced single electron photovoltaic effect in self-assembled InAs quantum dots (QDs). We used a single electron transistor (SET) geometry that consists of a single InAs QD and nanogap electrodes coupled with a bowtie antenna. Under a weak, broadband THz radiation, a photocurrent induced by THz intersublevel transitions in the QD is generated even when no bias voltage is applied to the SET. The observed single electron photovoltaic effect is due to an energy-dependent tunneling asymmetry in the QD-SET. Moreover, the tunneling asymmetry changes not only with the shell but also with the electron number in the QD, suggesting the manybody nature of the electron wavefunctions. The THz photovoltaic effect observed in the present QD-SET system may have potential applications to nanoscale energy harvesting.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Ultraviolet-enhanced photodetection in a graphene/SiO{sub 2}/Si capacitor structure with a vacuum channel

We report photodetection properties of a graphene/oxide/silicon capacitor structure with a nanoscale vacuum channel. The photogenerated two-dimensional electron gas (2DEG) inversion charges at SiO{sub 2}/Si interface are extracted out to air and transported along the void channel at low bias voltage (<5 V). A monolayer graphene, placed on top of SiO{sub 2} and suspended on the void channel, is utilized as a photon-transparent counter-electrode to the 2DEG layer and a collector electrode for the out-of-plane transported electrons, respectively. The photocurrent extracted through a void channel reveals high responsivity (1.0 A/W at 633 nm) as measured in a broad spectral range (325–1064 nm), especially demonstrating a UV-enhanced performance (0.43 A/W responsivity and 384% internal quantum efficiency at 325 nm). The mechanisms underlying photocarrier generation, emission, and transport in a suspended-graphene/SiO{sub 2}/Si structure are proposed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fabrication of cation-doped BaTaO{sub 2}N photoanodes for efficient photoelectrochemical water splitting under visible light irradiation

A series of cation-doped BaTaO{sub 2}N particle was synthesized to control the donor density in the bulk for improving the performance of photoelectrochemical water splitting on porous BaTaO{sub 2}N photoanodes under visible light. Among the dopants (Mo{sup 6+}, W{sup 6+}, Zr{sup 4+}, and Ti{sup 4+}) examined, Mo{sup 6+} cations can be introduced into the Ta{sup 5+} site up to 5 mol. % without producing any impurity phases; the donor density of BaTaO{sub 2}N was indeed increased significantly by introducing higher ratio of Mo{sup 6+} dopant. The porous photoanodes of Mo-doped BaTaO{sub 2}N showed much higher photocurrent than others including undoped one and also exhibited much improved performance in photoelectrochemical water splitting into H{sub 2} and O{sub 2} after loaded with cobalt oxide cocatalyst and coupled with Pt counter electrode.

36 MATERIALS SCIENCE↗

A WSe{sub 2}/MoSe{sub 2} heterostructure photovoltaic device

We report on the photovoltaic effect in a WSe{sub 2}/MoSe{sub 2} heterojunction, demonstrating gate tunable current rectification with on/off ratios of over 10{sup 4}. Spatially resolved photocurrent maps show the photovoltaic effect to originate from the entire overlap region. Compared to WSe{sub 2}/MoS{sub 2} heterostructures, our devices perform better at long wavelengths and yield higher quantum efficiencies, in agreement with Shockley-Queisser theory.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photovoltaic effect in Bi{sub 2}TeO{sub 5} photorefractive crystal

We report on the presence of a strong photovoltaic effect on nominally undoped photorefractive Bi{sub 2}TeO{sub 5} crystals and estimated their Glass photovoltaic constant and photovoltaic field for λ = 532 nm illumination. We directly measured the photovoltaic-based photocurrent in this material under λ = 532 nm wavelength laser light illumination and compared its behavior with that of a well known photovoltaic Fe-doped Lithium Niobate crystal. We also show the photovoltaic current to strongly depend on the polarization direction of light. Holographic diffraction efficiency oscillation during recording and the behavior of fringe-locked running holograms in self-stabilized experiments are also demonstrated here as additional indirect proofs of the photovoltaic nature of this material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Bi-Sn alloy catalyst for simultaneous morphology and doping control of silicon nanowires in radial junction solar cells

Low-melting point metals such as bismuth (Bi) and tin (Sn) are ideal choices for mediating a low temperature growth of silicon nanowires (SiNWs) for radial junction thin film solar cells. The incorporation of Bi catalyst atoms leads to sufficient n-type doping in the SiNWs core that exempts the use of hazardous dopant gases, while an easy morphology control with pure Bi catalyst has never been demonstrated so far. We here propose a Bi-Sn alloy catalyst strategy to achieve both a beneficial catalyst-doping and an ideal SiNW morphology control. In addition to a potential of further growth temperature reduction, we show that the alloy catalyst can remain quite stable during a vapor-liquid-solid growth, while providing still sufficient n-type catalyst-doping to the SiNWs. Radial junction solar cells constructed over the alloy-catalyzed SiNWs have demonstrated a strongly enhanced photocurrent generation, thanks to optimized nanowire morphology, and largely improved performance compared to the reference samples based on the pure Bi or Sn-catalyzed SiNWs.

14 SOLAR ENERGY↗

Decoupling optical and electronic optimization of organic solar cells using high-performance temperature-stable TiO{sub 2}/Ag/TiO{sub 2} electrodes

An electrode structured with a TiO{sub 2}/Ag/TiO{sub 2} (TAT) multilayer as indium tin oxide (ITO) replacement with a superior thermal stability has been successfully fabricated. This electrode allows to directly tune the optical cavity mode towards maximized photocurrent generation by varying the thickness of the layers in the sandwich structure. This enables tailored optimization of the transparent electrode for different organic thin film photovoltaics without alteration of their electro-optical properties. Organic photovoltaic featuring our TAT multilayer shows an improvement of ∼12% over the ITO reference and allows power conversion efficiencies (PCEs) up to 8.7% in PTB7:PC{sub 71}BM devices.

36 MATERIALS SCIENCE↗

Intrinsic slow charge response in the perovskite solar cells: Electron and ion transport

The intrinsic charge response and hysteresis characteristic in the perovskite solar cell has been investigated by an electrically modulated transient photocurrent technology. An ultraslow charge response process in the timescale of seconds is observed, which can be well explained by the ion migration in the perovskite CH{sub 3}NH{sub 3}PbI{sub 3} film driven by multiple electric fields derived from the heterojunction depletion charge, the external modulation, and the accumulated ion charge. Furthermore, theoretical calculation of charge transport reveals that the hysteresis behavior is also significantly influenced by the interfacial charge extraction velocity and the carrier transport properties inside the cell.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Switchable photovoltaic and polarization modulated rectification in Si-integrated Pt/(Bi 0.9 Sm 0.1 )(Fe 0.97 Hf 0.03 )O 3 /LaNiO 3 heterostructures

In this paper, we studied switchable photovoltaic and photo-diode characteristics of Pt/(Bi 0.9 Sm 0.1 )(Fe 0.97 Hf 0.03 )O 3 / LaNiO 3 (Pt/BSFHO/LNO) heterostructures integrated on Si (100). The directions of photocurrent (J SC ) and rectification are found to be reversibly switchable after applying external poling voltages. In pristine state, metal-ferroelectric-metal capacitor Pt/BSFHO/LNO shows J SC ~ 32 μA/cm 2 and V OC ~ 0.04 V, which increase to maximum value of J SC ~ 303 (-206) μA/cm 2 and V OC ~ -0.32 (0.26) V after upward (downward) poling at ±8 V. Finally, we believe that Schottky barrier modulation by polarization flipping at Pt/BSFHO interface could be a main driving force behind switchable photovoltaic and rectifying diode characteristics of Pt/BSFHO/LNO heterostructures.

36 MATERIALS SCIENCE↗

Ultrasensitive organic phototransistors with multispectral response based on thin-film/single-crystal bilayer structures

We report on highly efficient organic phototransistors (OPTs) based on thin-film/single-crystal planar bilayer junctions between 5,6,11,12-tetraphenyltetracene (rubrene) and [6,6]-phenyl-C{sub 61}-butyric acid methyl ester (PC{sub 61}BM). The OPTs show good field-effect characteristics in the dark, with high hole-mobility (4–5 cm{sup 2} V{sup −1} s{sup −1}), low-contact resistance (20 kΩ cm), and low-operating voltage (≤5 V). Excellent sensing capabilities allow for light detection in the 400–750 nm range, with photocurrent/dark current ratio as high as 4 × 10{sup 4}, responsivity on the order of 20 AW{sup −1} at 27 μW cm{sup −2}, and an external quantum efficiency of 52 000%. Photocurrent generation is attributed to enhanced electron and hole transfer at the interface between rubrene and PC{sub 61}BM, and fast response times are observed as a consequence of the high-mobility of the interfaces. The optoelectronic properties exhibited in these OPTs outperform those typically provided by a-Si based devices, enabling future applications where multifunctionality in a single-device is sought.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effect of tunable dot charging on photoresponse spectra of GaAs p-i-n diode with InAs quantum dots

Quantum dot (QD)-embedded photodiodes have demonstrated great potential for use as detectors. A modulation of QD charging opens intriguing possibilities for adaptive sensing with bias-tunable detector characteristics. Here, we report on a p-i-n GaAs photodiode with InAs QDs whose charging is tunable due to unintentional Be diffusion and trap-assisted tunneling of holes, from bias- and temperature (T)-dependent photocurrent spectroscopy. For the sub-bandgap spectra, the T-dependent relative intensities “QD-s/WL” and “WL/GaAs” (WL: wetting layer) indicate dominant tunneling under −0.9 V (trap-assisted tunneling from the top QDs) and dominant thermal escape under −0.2 ∼ 0.5 V (from the bottom QDs since the top ones are charged and inactive for optical absorption) from the QD s-state, dominant tunneling from WL, and enhanced QD charging at >190 K (related to trap level ionization). For the above-bandgap spectra, the degradation of the spectral profile (especially near the GaAs bandedge) as the bias and T tune (especially under −0.2 ∼ 0.2 V and at >190 K) can be explained well by the enhanced photoelectron capture in QDs with tunable charging. The dominant spectral profile with no degradation under 0.5 V is due to a saturated electron capture in charged QDs (i.e., charging neutralization). QD level simulation and schematic bandstructures can help one understand these effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Polymer-based solar cells having an active area of 1.6 cm{sup 2} fabricated via spray coating

We demonstrate the fabrication of polymer solar cells in which both a PEDOT:PSS hole transport and a PCDTBT:PC{sub 71}BM photoactive layer are deposited by spray-casting. Two device geometries are explored, with devices having a pixel area of 165 mm{sup 2} attaining a power conversion efficiency of 3.7%. Surface metrology indicates that the PEDOT:PSS and PCDTBT:PC{sub 71}BM layers have a roughness of 2.57 nm and 1.18 nm over an area of 100 μm{sup 2}. Light beam induced current mapping reveals fluctuations in current generation efficiency over length-scales of ∼2 mm, with the average photocurrent being 75% of its maximum value.

36 MATERIALS SCIENCE↗

High-performance ultraviolet detection and visible-blind photodetector based on Cu{sub 2}O/ZnO nanorods with poly-(N-vinylcarbazole) intermediate layer

This study reports a high-performance hybrid ultraviolet (UV) photodetector with visible-blind sensitivity fabricated by inserting a poly-(N-vinylcarbazole) (PVK) intermediate layer between low-cost processed Cu{sub 2}O film and ZnO nanorods (NRs). The PVK layer acts as an electron-blocking/hole-transporting layer between the n-ZnO and p-Cu{sub 2}O films. The Cu{sub 2}O/PVK/ZnO NR photodetector exhibited a responsivity of 13.28 A/W at 360 nm, a high detectivity of 1.03 × 10{sup 13} Jones at a low bias of −0.1 V under a low UV light intensity of 24.9 μW/cm{sup 2}. The photo-to-dark current ratios of the photodetector with and without the PVK intermediate layer at a bias of −0.5 V are 1.34 × 10{sup 2} and 3.99, respectively. The UV-to-visible rejection ratios (R{sub 360 nm}/R{sub 450 nm}) are 350 and 1.735, respectively. Several features are demonstrated: (a) UV photo-generated holes at the ZnO NRs can effectively be transported through the PVK layer to the p-Cu{sub 2}O layer; (b) the insertion of a PVK buffer layer significantly minimizes the reverse-bias leakage current, which leads to a larger amplification of the photocurrent; and (c) the PVK buffer layer greatly improves the UV-to-visible responsivity ratio, allowing the device to achieve high UV detection sensitivity at a low bias voltage using a very low light intensity.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗