Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase separation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Rationale for two phase polymer system microgravity separation experiments

The two-phase systems that result when aqueous solutions of dextran and poly(ethylene glycol) are mixed at concentrations above a few percent are discussed. They provide useful media for the partition and isolation of macromolecules and cell subpopulations. By manipulating their composition, separations based on a variety of molecular and surface properties are achieved, including membrane hydrophobic properties, cell surface charge, and membrane antigenicity. Work on the mechanism of cell partition shows there is a randomizing, nonthermal energy present which reduces separation resolution. This stochastic energy is probably associated with hydrodynamic interactions present during separation. Because such factors should be markedly reduced in microgravity, a series of shuttle experiments to indicate approaches to increasing the resolution of the procedure are planned.

Brooks, D. E.↗
NASA NTRS1985

Sample selection and testing of separation processes

Phase partitioning, which has become an important tool for the separation and purification of biological materials, was studied. Instruments available for this technique were researched and a countercurrent distribution apparatus, the Biosheff MK2N, was purchased. Various proteins, polysaccharides and cells were studied as models to determine operating procedures and conditions for this piece of equipment. Results were compared with those obtained from other similar equipment, including a nonsynchronous coil planet centrifuge device. Additionally, work was done with affinity ligands attached to PEG, which can further enhance the separation capabilities of phase partitioning.

Karr, L. J.↗
DOE OSTI2024

Polymeric ionic liquids containing copper(I) and copper(II) ions as gas chromatographic stationary phases for olefin separations

Copper(I) ions (Cu + ) are used in olefin separations due to their olefin complexing ability and low cost, but their instability in the presence of water and gases limits their widespread use. Ionic liquids (ILs) have emerged as stabilizers of Cu + ions and prevent their degradation, providing high olefin separation efficiency. There is limited understanding into the role that polymeric ionic liquids (PILs), which possess similar structural characteristics to ILs, have on Cu + ion-olefin interactions. Moreover, copper ions with diverse oxidation states, including Cu + and Cu 2+ ions, have been rarely employed for olefin separations. In this study, gas chromatography (GC) is used to investigate the interaction strength of olefins to stationary phases composed of the 1-hexyl-3-methylimidazolium bis[(trifluoromethyl)sulfonyl]imide ([C 6 MIM + ][NTf 2 – ]) IL and the poly(1-hexyl-3-vinylimidazolium [NTf 2 – ]) (poly([C 6 VIM + ][NTf 2 – ])) PIL containing monovalent and divalent copper salts (i.e., [Cu + ][NTf 2 – ] and [Cu 2+ ]2[NTf 2 – ]). The chromatographic retention of alkenes, alkynes, dienes, and aromatic compounds was examined. Incorporation of the [Cu 2+ ]2[NTf 2 – ] salt into a stationary phase comprised of poly(dimethylsiloxane) resulted in strong retention of olefins, while its addition to the [C 6 MIM + ][NTf 2 – ] IL and poly([C 6 VIM + ][NTf 2 – ]) PIL allowed for the interaction strength to be modulated. Olefins exhibited greater affinities toward IL and PIL stationary phases containing the [Cu 2+ ]2[NTf 2 – ] salt compared to those with the [Cu + ][NTf 2 – ] salt. Elimination of water from both copper salts was observed to be an important factor in promoting olefin interactions, as evidenced by increased olefin retention upon exposure of the stationary phases to high temperatures. Furthermore, to evaluate the long-term thermal stability of the stationary phase, chromatographic retention of probes was measured on the [Cu 2+ ]2[NTf 2 – ]/[C 6 MIM + ][NTf 2 – ] IL stationary phase after its exposure to helium at a temperature of 110°C.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Structure of Complex Liquid–Liquid Extraction Organic Phases for Rare Earth Separations

Complex, multicomponent liquids with hierarchical structure and phase transitions are encountered in many natural and industrial processes, including in chemical separations. One notable example is aggregation and organic phase splitting in liquid–liquid extraction (LLE) of metal ions. While these two phenomena that have long been closely associated, a mechanistic link between mesoscale structure and the capacity-limiting organic phase splitting remains elusive due to complexity of these systems. Here, in this study, we combine small-angle X-ray scattering (SAXS), X-ray photon correlation spectroscopy (XPCS), and molecular dynamics simulation to reveal a comprehensive picture of structure at the nano- and mesoscale in these complex solutions. For the representative case of rare earth extraction from an acidic aqueous phase by a malonamide extractant in dodecane, we investigate a wide range of process-relevant extractant and acid concentrations to provide a complete picture of how aggregation depends on composition. We decompose organic phase structure from SAXS into two contributions, which together can capture the scattering at all compositions: composition fluctuations described by the Ornstein–Zernike equation at low wavenumber Q, and nanostructure modeled by a “pre-peak” at intermediate Q. The former contains information about the thermodynamics of demixing, while the latter reflects nanoscopic self-assembly of the extractant and extracted solutes. While fluctuations have typically not been considered in the literature, we find they in fact dominate the total structure for nearly all practical conditions. As only the fluctuations have a strong temperature response, we confirm this attribution with temperature-dependent SAXS measurements, including for extracted europium nitrate complexes. SAXS and XPCS measurements near the critical point find static and dynamic scaling consistent with theory. Overall, this new paradigm for understanding LLE organic phases connects composition, nanoscale, and mesoscale structuring to phase behavior, providing both a comprehensive picture of solution structure and a quantitative link between aggregation and third phase formation.

Peroutka, Allison A. [Argonne National Laboratory ↗
DOE OSTI2024

Higgs-confinement transitions in QCD from symmetry protected topological phases

In gauge theories with fundamental matter there is typically no sharp way to distinguish confining and Higgs regimes, e.g. using generalized global symmetries acting on loop order parameters. It is standard lore that these two regimes are continuously connected, as has been explicitly demonstrated in certain lattice and continuum models. We point out that Higgsing and confinement sometimes lead to distinct symmetry protected topological (SPT) phases -- necessarily separated by a phase transition -- for ordinary global symmetries. We present explicit examples in 3+1 dimensions, obtained by adding elementary Higgs fields and Yukawa couplings to QCD while preserving parity P and time reversal T. In a suitable scheme, the confining phases of these theories are trivial SPTs, while their Higgs phases are characterized by non-trivial P- and T-invariant theta-angles θ f , θ g = π for flavor or gravity background gauge fields, i.e. they are topological insulators or superconductors. Finally, we consider conventional three-flavor QCD (without elementary Higgs fields) at finite U(1) B baryon-number chemical potential μ B , which preserves P and T. At very large μ B , three-flavor QCD is known to be a completely Higgsed color superconductor that also spontaneously breaks U(1) B . We argue that this high-density phase is in fact a gapless SPT, with a gravitational theta-angle θ g = π that safely co-exists with the U(1) B Nambu-Goldstone boson. We explain why this SPT motivates unexpected transitions in the QCD phase diagram, as well as anomalous surface modes at the boundary of quark-matter cores inside neutron stars.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
NASA NTRS1974

Two-phase, passive separator-and-filter assembly

Assembly separates liquid from gas by passive hydrophilic/hydrophobic material approach. Apparatus is comprised of porous glass hydrophilic tubes. Quantity, lateral size, and pore size of glass tubes are determined by particular design requirements with regard to water rate, water quality contamination level, application endurance life, and operating differential pressure level.

Erickson, A. C.↗
NASA NTRS1986

Surface effects on phase distributions of a fast-quenched miscibility gap type system - Succinonitrile-water

If a binary homogeneous melt is cooled into an immiscible region, the newly formed second phase will generally have a density different from the parent phase, and will separate readily by sedimentation. Observation of solidification processes in microgravity indicates that outside of sedimentation, at least two other important effets can separate the phases: (1) preferential wetting, and (2) thermal migration of second-phase droplets due to interfacial tension gradients. The latter effect would drive the minority phase along the thermal gradient toward the hottest part (assuming the interfacial tension decreases with increasing temperature), which is usually away from the crucible wall. On the other hand, if the minority phase preferentially wets the crucible, a minority phase layer which thickens as initial solution compositions approach critical, will form adjacent to the solid surface and remain in the coldest region of the ingot. This study presents compelling preliminary evidence that these two effects do exist and that they compete with one another. However, the temperature dependence of preferential wetting below T(c) for the current system of study is, as yet, undetermined. These effects are sensitive to the initial concentration of a hypermonotectic solution cooling through a miscibility gap.

Frazier, D. O.↗
NASA NTRS1998

"Reagentless" flow injection determination of ammonia and urea using membrane separation and solid phase basification

Flow injection analysis instrumentation and methodology for the determination of ammonia and ammonium ions in an aqueous solution are described. Using in-line solid phase basification beds containing crystalline media. the speciation of ammoniacal nitrogen is shifted toward the un-ionized form. which diffuses in the gas phase across a hydrophobic microporous hollow fiber membrane into a pure-water-containing analytical stream. The two streams flow in a countercurrent configuration on opposite sides of the membrane. The neutral pH of the analytical stream promotes the formation of ammonium cations, which are detected using specific conductance. The methodology provides a lower limit of detection of 10 microgram/L and a dynamic concentration range spanning three orders of magnitude using a 315-microliters sample injection volume. Using immobilized urease to enzymatically promote the hydrolysis of urea to produce ammonia and carbon dioxide, the technique has been extended to the determination of urea.

NASA Center JSC↗
DOE OSTI2025

Sulfur-functionalized solid-phase materials for the selective separation of arsenic and selenium

Radioactive arsenic (As) isotopes are of growing interest for applications in nuclear medicine, national security, and environmental research. Recent efforts at the Facility for Rare Isotope Beams (FRIB) have focused on aqueous harvesting of selenium-72,73 ( 72,73 Se) and their daughter isotopes, arsenic-72,73 ( 72,73 As), which are particularly valuable for medical applications and nuclear data studies, respectively. Both conventional isotope production and harvesting methods require chemical separations to purify radioactive As from parent and co-produced Se radioisotopes. While several solid-phase separation methods for As and Se exist, many depend on complex oxidation state control or highly acidic conditions. This study presents results for sulfur-based solid-phase materials selected to enable uptake at lower acidity and eliminate the need for intricate redox chemistry. Specifically, the performance of three covalently bound sulfur-based ligands were evaluated: (1) thiophenol-polystyrene, (2) propanethiol-silica, and (3) thiourea-silica. Uptake characteristics—including distribution coefficients (Dw), kinetics, and column separation behavior—were assessed using 75 Se and 73 As in hydrochloric (HCl) acid and nitric (HNO 3 ) solutions. The resins demonstrated high-yield (>95%) and high-purity As recovery across a range of HCl concentrations. Comparable results in HNO 3 were achieved when combined with anion exchange chromatography. Furthermore, the potential application of these materials for medical isotope generators was also investigated through ligand stability and repeated elution studies. Overall, sulfur leaching from the resins was negligible at the concentrations relevant for these separations but increased with higher acid concentrations.

Arsenic↗
NASA NTRS1995

Dynamic neural networks based on-line identification and control of high performance motor drives

In the automated and high-tech industries of the future, there wil be a need for high performance motor drives both in the low-power range and in the high-power range. To meet very straight demands of tracking and regulation in the two quadrants of operation, advanced control technologies are of a considerable interest and need to be developed. In response a dynamics learning control architecture is developed with simultaneous on-line identification and control. the feature of the proposed approach, to efficiently combine the dual task of system identification (learning) and adaptive control of nonlinear motor drives into a single operation is presented. This approach, therefore, not only adapts to uncertainties of the dynamic parameters of the motor drives but also learns about their inherent nonlinearities. In fact, most of the neural networks based adaptive control approaches in use have an identification phase entirely separate from the control phase. Because these approaches separate the identification and control modes, it is not possible to cope with dynamic changes in a controlled process. Extensive simulation studies have been conducted and good performance was observed. The robustness characteristics of neuro-controllers to perform efficiently in a noisy environment is also demonstrated. With this initial success, the principal investigator believes that the proposed approach with the suggested neural structure can be used successfully for the control of high performance motor drives. Two identification and control topologies based on the model reference adaptive control technique are used in this present analysis. No prior knowledge of load dynamics is assumed in either topology while the second topology also assumes no knowledge of the motor parameters.

Rubaai, Ahmed↗
NASA NTRS1973

Separation of gas from liquid in a two-phase flow system

Separation system causes jets which leave two-phase nozzles to impinge on each other, so that liquid from jets tends to coalesce in center of combined jet streams while gas phase is forced to outer periphery. Thus, because liquid coalescence is achieved without resort to separation with solid surfaces, cycle efficiency is improved.

Hayes, L. G.↗
DOE OSTI2025

Super-resolution imaging reveals resistance to mass transfer in functionalized stationary phases

Chemical separations are costly in terms of energy, time, and money. Separation methods are optimized with inefficient trial-and-error approaches that lack insight into the molecular dynamics that lead to the success or failure of a separation and, hence, ways to improve the process. We perform super-resolution imaging of fluorescent analytes in five different commercial liquid chromatography materials. Unexpectedly, we observe that chemical functionalization can block more than 50% of the material’s porous interior, rendering it inaccessible to small-molecule analytes. Only in situ imaging unveils the inaccessibility when compared to the industry-accepted ex situ characterization methods. Selectively removing some of the functionalization with solvent restores pore access without substantially altering the single-molecule kinetics that underlie the separation and agree with bulk chromatography measurements. Our molecular results determine that commercial “fully porous” stationary phases are over-functionalized and provide an alternative avenue to characterize and direct separation material design from the bottom-up.

Science & Technology - Other Topics↗
DOE OSTI2020

Regression models using shapes of functions as predictors

Functional variables are often used as predictors in regression problems. A commonly used parametric approach, called scalar-on-function regression, uses the $\mathbb L^2$ inner product to map functional predictors into scalar responses. This method can perform poorly when predictor functions contain undesired phase variability, causing phases to have disproportionately large influence on the response variable. One past solution has been to perform phase–amplitude separation (as a pre-processing step) and then use only the amplitudes in the regression model. In this paper, we propose a more integrated approach, termed elastic functional regression model (EFRM), where phase-separation is performed inside the regression model, rather than as a pre-processing step. This approach generalizes the notion of phase in functional data, and is based on the norm-preserving time warping of predictors. Due to its invariance properties, this representation provides robustness to predictor phase variability and results in improved predictions of the response variable over traditional models. We demonstrate this framework using a number of datasets involving gait signals, NMR data, and stock market prices.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1985

Cell Partition in Two Polymer Aqueous Phases

In a reduced gravity environment the two polymer phases will not separate via density driven settling in an acceptably short length of time. It is to be expected that a certain amount of phase separation will take place, however, driven by the reduction in free energy gained when the interfacial area is reduced. This stage of separation process will therefore depend directly on the magnitude of the interfacial tension between the phases. In order to induce complete phase separation in a short time, electric field-induced separation which occurs because the droplets of one phase in the other have high electrophoretic mobilities which increase with droplet size was investigated. These mobilities are significant only in the presence of certain salts, particularly phosphates. The presence of such salts, in turn has a strong effect on the cell partition behavior in dextran-poly (ethylene glycol) (PEG) systems. The addition of the salts necessary to produce phase drop mobilities has a large effect on the interfacial tensions in the systems.

Brooks, D. E.↗
DOE OSTI2025

Elucidating the Interfacial Barriers in Lanthanide Back-Extraction: From Water to Oil and Back Again

Recovery of critical rare earth elements from complex mixtures has long been realized via solvent extraction, where ions in an aqueous phase are separated into an organic phase using amphiphilic ligands. While a great deal of effort has been placed on understanding this forward reaction, substantial knowledge gaps in the back-extraction process remain. This includes the mechanism of interfacial dissociation and transport back into a highly acidic aqueous phase for further processing. In this work, we connect back-extraction kinetics made in realistic solvent extraction systems to salient interfacial chemistry and structure that represent bottlenecks in the back-extraction of lanthanide ions. We show that the interface between the two liquid phases varies dramatically based on the composition of both phases. Water stretching signals are shown to report on the population of lingering interfacial complexes and are thus used as a reporter of competitive adsorption from excess free ligands in solution for limited interfacial vacancies. We show that excess free ligands, often used to improve forward extractions, set up interfacial blockades inhibiting back-extraction both kinetically and thermodynamically. In conclusion, this insight opens up avenues to tune interfacial properties to facilitate a more dynamic, exchangeable interface to speed up back-extractions while using less energy intensive chemical swings.

Interfaces↗