Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Phase Stability”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Prediction of crystal structures and motifs in the Fe–Mg–O system at Earth’s core pressures

Abstract Fe, Mg, and O are among the most abundant elements in terrestrial planets. While the behavior of the Fe–O, Mg–O, and Fe–Mg binary systems under pressure have been investigated, there are still very few studies of the Fe–Mg–O ternary system at relevant Earth’s core and super-Earth’s mantle pressures. Here, we use the adaptive genetic algorithm (AGA) to study ternary Fe x Mg y O z phases in a wide range of stoichiometries at 200 GPa and 350 GPa. We discovered three dynamically stable phases with stoichiometries FeMg 2 O 4 , Fe 2 MgO 4, and FeMg 3 O 4 with lower enthalpy than any known combination of Fe–Mg–O high-pressure compounds at 350 GPa. With the discovery of these phases, we construct the Fe–Mg–O ternary convex hull. We further clarify the composition- and pressure-dependence of structural motifs with the analysis of the AGA-found stable and metastable structures. Analysis of binary and ternary stable phases suggest that O, Mg, or both could stabilize a BCC iron alloy at inner core pressures.

Wang, Renhai↗
DOE OSTI2020

Efficient and robust phase-split computations in the internal energy, volume, and moles ( UVN ) space

Phase-split computations in an isolated system, which in general may be defined as one where the total internal energy (U), volume (V), and the number of moles (N = N 1 , N 2 ,..., N n ) of the components are fixed at some specified set of values, involves the determination of the temperature (T), pressure (P), plus the amount and composition of the various phases that constitute the system. A simpler, but analogous problem is one where T, P, and N are specified instead. In TPN space, one may first perform a stability analysis to determine whether the system is stable, meaning whether at equilibrium it will split up into multiple phases or remain in single phase. If the single-phase state is unstable, the stability analysis reliably provides a good set of initial guesses in the subsequent phase-split computations. In UVN space, however, we demonstrate that the stability analysis (which is the main subject of our earlier study [1]) may not in general provide good enough initial guesses; we offer alternative strategies for setting up good initial guesses. Furthermore, we show that a combination of successive substitution iteration (SSI) and Newton's method---two iterative methods that are prevalent in the literature in TPN space---facilitates a robust and efficient algorithm for phase-split computations in isolated systems. Finally, this combination has so far not been applied in UVN space.

02 PETROLEUM↗
DOE OSTI2023

Solubility behavior and thermodynamic modeling of sodium monosulfoaluminate (“U‐phase”) in cementitious systems

Abstract The “U‐phase,” a sodium‐containing (alumino‐ferrite‐monosubstituent) AFm phase, has been observed to form in sodium‐enriched highly alkaline cementitious systems, for example, of relevance to nuclear waste, and saline industrial brine management. But, minimal information is available of the U‐phase's (e.g., solubility or thermodynamic properties) due to its limited stability and its tendency to transform into ettringite or monosulfoaluminate. Herein, the U‐phase was systematically synthesized at four temperatures (5, 15, 25, and 50°C) and fully characterized in terms of its thermochemical properties. The average composition of the synthesized U‐phase (4CaO·Al 2 O 3 ·1.85SO 3 ·0.85Na 2 O·12H 2 O) deviates slightly from typical disclosures in the literature. The solubility product of the U‐phase formation was measured from conditions of oversaturation. The measured thermodynamic data accurately predicted experimental observations of U‐phase formation in cementitious environments. In general, it was noted that the U‐phase forms and persists (i.e., remains stable) at pH > 13.7 and [Na + ] concentrations superior to 1 mol/L.

Materials Science↗
DOE OSTI2022

First-principles analysis of the Al-rich corner of Al-Li-Cu phase diagram

The phase diagram of Al-Li-Cu system in the Al-rich region was determined by means of first-principles calculations and statistical mechanics. The mixing enthalpies of many configurations for different lattices in the whole Al-Li-Cu system were determined by density functional theory simulations to find the stable phases in the convex hull. They were fitted with a cluster expansion to calculate the free energy of the configurations with different compositions as a function of temperature in the Al-rich region (Al content > 40 at.%) by means of Monte Carlo simulations. It was found that the ground state phases in the Al-rich part of the Al-Li-Cu phase diagram were α-Al, θ' (Al 2 Cu), $δ$' (Al 3 Li), $δ$ (AlLi) and T 1 (Al 6 Cu 4 Li 3 ), while θ'' (Al 3 Cu), T 1' (Al 2 CuLi) and Al 3 Cu 2 Li were found on the lowest mixing enthalpy surfaces of their lattices and were metastable. α-Al, $δ$ and T 1 are stable phases in the whole temperature range while $δ$' becomes metastable at very low temperature and θ (Al 2 Cu) replaces θ' as the stable phase at approximately 550 K due to the vibrational entropic contribution. In addition, the phase diagram in the Al-rich region was built and it was shown in isothermal sections from 100 to 900 K. They were in good agreement with the limited experimental data in the literature and provided new information regarding the stability, solubility and stoichiometry of the different phases. This information is important to understand the precipitation mechanisms during high temperature aging.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Operation and Control of a PV Converter with Enhanced Stability Based on Virtual Impedance Emulation in a Pseudo Resistive Grid

A three-phase grid-connected photo-voltaic converter is investigated to enhance its operational capabilities and stability margins. These converters are generally connected to the grid with an inductive impedance. In this paper the possibility of using a resistive impedance to enhance the stability of the overall system has been investigated. To reduce the losses in the system, rather than using a real resistance, a virtual resistance is emulated inside the control architecture to ensure resistive power transfer between two sources. The stability results with inductive and resistive grids are presented based on the previously reported frequency response. The overall system is modeled via MATLAB/Simulink and several important case study results are presented in this paper to verify the efficacy of the proposed architecture.

grid-forming controls↗
DOE OSTI2021

Synthesis and characterization of porous polydimethylsiloxane structures with adjustable porosity and pore morphology using emulsion templating technique

Abstract Porous polydimethylsiloxane (PDMS) framework with adjustable pore structures has been fabricated by polymerization of the continuous phase in the emulsion templates. Different types of surfactants, including nonionic (Triton X‐100), cationic (Benzalkonium chloride), anionic (sodium dodecyl sulfate), and silicone‐based block copolymer were used to stabilize the water‐in‐oil emulsion system. Deionized water with a wide range of internal phases varying from 10% to 60% by weight was employed to make the low internal phase emulsion and medium internal phase emulsion. The effect of surfactant type, surfactant concentration, and the internal phase volume on the stability of the emulsion, pore morphology, and pore size distribution was explored. The stability of the emulsion was investigated by comparing the pore morphology of the cured sample at different set times, such as 0, 6, and 72 h. Scanning electron microscopy was employed for the characterization of the porous structures. The image analysis was conducted, and the pore size distribution, porosity, and open‐cell ratio of each sample were calculated. Interconnected pores have been seen in the porous PDMS made from emulsions with an internal phase larger than 30%. The results demonstrated that the frequency of open‐cell pores and the pore size is dependent on the surfactant types.

Abshirini, Mohammad↗
DOE OSTI2022

Structural and Optical Properties of High Entropy (La,Lu,Y,Gd,Ce)AlO 3 Perovskite Thin Films

Mixtures of Ce-doped rare-earth aluminum perovskites are drawing a significant amount of attention as potential scintillating devices. However, the synthesis of complex perovskite systems leads to many challenges. Designing the A-site cations with an equiatomic ratio allows for the stabilization of a single-crystal phase driven by an entropic regime. This work describes the synthesis of a highly epitaxial thin film of configurationally disordered rare-earth aluminum perovskite oxide (La 0.2 Lu 0.2 Y 0.2 Gd 0.2 Ce 0.2 )AlO 3 and characterizes the structural and optical properties. The thin films exhibit three equivalent epitaxial domains having an orthorhombic structure resulting from monoclinic distortion of the perovskite cubic cell. An excitation of 286.5 nm from Gd 3+ and energy transfer to Ce 3+ with 405 nm emission are observed, which represents the potential for high-energy conversion. These experimental results also offer the pathway to tunable optical properties of high-entropy rare-earth epitaxial perovskite films for a range of applications.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Screening and Development of Sacrificial Cathode Additives for Lithium‐Ion Batteries

Abstract This work presents a computational screening approach to identify Li‐rich transition‐metal oxide sacrificial cathode additives and provides experimental validation of antifluorite‐structured Li 6 MnO 4 as a potential candidate. Initial attempts to synthesize this compound result in low purity (≤40% by weight) owing to close thermodynamic competition with Li 2 O and MnO at low temperature. However, it is shown that a much higher purity of 85% by weight can be achieved by combining Li excess with rapid cooling from high temperature, which effectively stabilizes the Li 6 MnO 4 phase. The synthesized product delivers a high irreversible Li release capacity that exceeds 700 mAh g −1 by utilizing combined Mn oxidation (Mn 2+/3+ and Mn 3+/4+ ) and O oxidation. These results demonstrate that Li 6 MnO 4 may therefore be useful as a potential sacrificial cathode additive in Li‐ion batteries and motivate further investigation of other structurally‐related compounds. While attempts were made to synthesize two additional compounds among computationally screened candidates, it was not successful to experimentally realize the two candidates. The difficulty of experimental realization of the newly predicted materials remains a challenge and it is suggested that more efforts need to be devoted to developing computational techniques to precisely predict synthesizability and propose potential synthetic routes of the predicted materials.

Kim, Haegyeom↗
DOE OSTI2020

Transition Metal Nitrides as Promising Catalyst Supports for Tuning CO/H 2 Syngas Production from Electrochemical CO 2 Reduction

The electrochemical carbon dioxide reduction reaction (CO 2 RR) to produce synthesis gas (syngas) with tunable CO/H 2 ratios has been studied by supporting Pd catalysts on transition metal nitride (TMN) substrates. Combining experimental measurements and density functional theory (DFT) calculations, Pd-modified niobium nitride (Pd/NbN) is found to generate much higher CO and H 2 partial current densities and greater CO Faradaic efficiency than Pd-modified vanadium nitride (Pd/VN) and commercial Pd/C catalysts. In-situ X-ray diffraction identifies the formation of PdH in Pd/NbN and Pd/C under CO 2 RR conditions, whereas the Pd in Pd/VN is not fully transformed into the active PdH phase. DFT calculations show that the stabilized *HOCO and weakened *CO intermediates on PdH/NbN are critical to achieving higher CO 2 RR activity. This work suggests that NbN is a promising substrate to modify Pd, resulting in an enhanced electrochemical conversion of CO 2 to syngas with a potential reduction in precious metal loading.

25 ENERGY STORAGE↗
DOE OSTI2023

On the Electride Nature of Na–hP4

Early quantum mechanical models suggested that pressure drives solids towards free-electron metal behavior where the ions are locked into simple close-packed structures. The prediction and subsequent discovery of high-pressure electrides (HPEs), compounds assuming open structures where the valence electrons are localized in interstitial voids, required a paradigm shift. Our quantum chemical calculations on the iconic insulating Na-hP4 HPE show that increasing density causes a 3s→3pd electronic transition due to Pauli repulsion between the 1s2s and 3s states, and orthogonality of the 3pd states to the core. The large lobes of the resulting Na-pd hybrid orbitals point towards the center of an 11-membered penta-capped trigonal prism and overlap constructively, forming multicentered bonds, which are responsible for the emergence of the interstitial charge localization in Na-hP4. As a result, these multicentered bonds facilitate the increased density of this phase, which is key for its stabilization under pressure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Refining the GENEVA method for Higgs boson production via gluon fusion

We describe a number of improvements to the Geneva method for matching NNLO calculations to parton shower programs. In particular, we detail changes to the resummed calculation used in the matching procedure, including disentangling the cross section dependence on factorisation and beam scales, and an improved treatment of timelike logarithms. We also discuss modifications in the implementation of the splitting functions which serve to make the resummed calculation differential in the higher multiplicity phase space. These changes improve the stability of the numerical cancellation of the nonsingular term at small values of the resolution parameter. As a case study, we consider the gluon-initiated Higgs boson production process gg → H. We validate the NNLO accuracy of our predictions against independent calculations, and compare our showered and hadronised results with recent data taken at the ATLAS and CMS experiments in the diphoton decay channel, finding good agreement.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2021

Improving intrinsic oxygen reduction activity and stability: Atomic layer deposition preparation of platinum-titanium alloy catalysts

Improved activity and stability Pt-based catalysts for the oxygen reduction reaction (ORR) are needed to perpetuate the deployment of polymer electrolyte fuel cells (PEFCs) in the transportation sector. In this study, we use atomic layer deposition of TiO 2 and Pt coupled with thermal reductive annealing to prepare Pt 3 Ti electrocatalysts. The atomic level synthetic control resulted in Pt 3 Ti nanoparticles with high ORR performance, including a mass activity of 1.84 A/mg Pt and excellent electrochemical stability. The Pt 3 Ti nanoparticles show excellent specific activity — 5.3-fold higher than commercial Pt/C and 3-fold higher than polycrystalline Pt, exceeding the performance of any PtTi catalysts reported to date. Combined experimental and computational efforts indicate that Pt enrichment on the Pt 3 Ti enhances the activity, and the intrinsic stability of the Pt 3 Ti phase provides durability. Subsequently, this knowledge, along with the facile fabrication of alloys by atomic layer deposition, can be leveraged to designed improved performance catalysts.

25 ENERGY STORAGE↗
DOE OSTI2025

Generalizable machine learning potentials for quantum-accurate predictions of non-equilibrium behavior in 2D materials

Machine learning interatomic potentials (ML-IAPs) are emerging as transformative tools in materials modeling, promising quantum-level accuracy at a fraction of the computational cost. However, their ability to generalize beyond equilibrium configurations and to reliably capture defect- and temperature-driven behavior remains underexplored. Here, we develop and benchmark two state-of-the-art ML-IAPs, Spectral Neighbor Analysis Potential (SNAP) and Allegro, on a comprehensive dataset for monolayer MoSe₂. Using density functional theory (DFT) as the reference, we evaluate their performance in capturing stress–strain behavior, phase transition energetics, defect evolution, edge stability, and fracture toughness. Allegro, a deep equivariant neural network potential, surpasses both SNAP and the classical Tersoff potential in accuracy, efficiency, and transferability. Importantly, both ML potentials accurately reproduce experimental fracture measurements and ab initio predictions of inversion domain formation—phenomena well beyond their training sets. Our findings establish ML-IAPs as viable replacements for traditional force fields in the study of non-equilibrium mechanical phenomena, enabling large-scale, high-fidelity simulations in 2D materials and beyond. In conclusion, this work provides a broadly applicable framework for data-driven modeling of structural and functional transformations under extreme conditions.

2D materials↗
DOE OSTI2021

Layer spacing gradient (NaLi) 1–x CoO 2 for electrochemical Li extraction

Designing materials with high Li to Na selectivity is the key for direct extraction of Li from unconventional sources, such as seawater, without complex separations. However, material discovery is hindered by an insufficient understanding on how a material's composition and structure relate to Li selectivity during electrochemical co-intercalation. Here, we synthesized a core-shell structured (NaLi) 1-x CoO 2 with a core Li phase (Li 0.94 CoO 2 ), a shell Na phase (Na 0.51 CoO 2 ), and a transition intermediate phase via Na ion-exchange of parent Li 1-x CoO 2 . We reveal that the chemical compositions and spatial relation of these phases play critical roles in governing high Li to Na selectivity. The core Li phase restricts large layer spacing expansion and inhibits Na intercalation. The shell Na phase serves to maintain the electrode stability against further Na ion exchange. With the layer spacing gradient design, we achieved a high Li selectivity of 1.5 x 10 5 with a recovery of similar to 7.6:1 Li to Na from 1:20,000 initial ratio.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Superconductivity in Y 4 RuGe 8 with a Vacancy-Ordered CeNiSi 2 -Type Superstructure

In this work, we report a new compound, Y 4 RuGe 8 , with a transition metal vacancy-ordered CeNiSi 2 -type superstructure, which has a superconducting transition at 1.3 K. Y 4 RuGe 8 crystals were grown by indium flux at relatively low temperatures (below 1273 K), which makes it possible to stabilize such a vacancy-ordered phase. The crystal structure of Y 4 RuGe 8 was solved by single-crystal X-ray diffraction and confirmed by transmission electron microscopy. The as-grown Y 4 RuGe 8 crystals are always twinned, crystallizing in the space group $P\bar{1}$(no. 2) with the lattice parameters a = 5.7680(1) Å, b = 8.2042(2) Å, c = 11.5093(3) Å, α = 79.696(1)degrees, β = 88.491(1)degrees, and γ = 79.637(2)degrees; this structure is a superstructure deriving from the higher symmetry CeNiSi 2 -type structure (Cmcm, no. 63) due to the ordering of Ru vacancies. The ordering of Ru sites breaks slightly distorted Ge planes in the CeNiSi 2 prototype into infinite cis-trans Ge chains in Y 4 RuGe 8 . The presence of bulk superconductivity in Y 4 RuGe 8 is well supported by zero resistance and a jump in specific heat at the critical transition temperature. The Sommerfeld coefficient (19 mJ K -2 mol -1 ) of the specific heat is greater than that (11 mJ K -2 mol -1 ) estimated using the bare density of states (4.7 states/eV/f.u.) from first-principles calculations. The ab initio calculations indicate that 4d electrons of both Y and Ru and 4p electrons of Ge are the main contributors to the total density of states at the Fermi level in Y 4 RuGe 8 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Origin of Disorder Tolerance in Piezoelectric Materials and Design of Polar Systems

Current high-performing piezoelectric materials are dominated by perovskites that rely on soft optical phonon modes stabilized by disorder near a morphotropic phase boundary and a unique resilience of the polar response to that disorder. To identify structural families with similar resilience, in this study we develop a first-principles sensitivity analysis approach to determine the effect of disorder on the piezoelectric response for structures in the Materials Project database. In well-known piezoelectric systems, the lattice dynamics, rather than internal strain or dielectric, control the polar response. Additionally, multiple stable optical phonon modes are found to contribute to the piezoelectric response, providing a fingerprint for disorder tolerance. A multiple-phonon mode criterion is used to evaluate candidate materials for disorder-tolerant piezoelectric prototype systems. Five promising structures are altered through chemical substitution, generating potential MPB end points with large piezoelectric responses beyond perovskites including Akermanite Sr 2 x Ca 2 – 2 x CoSi 2 O 7 , which exhibits a nearly 20% increase in response at the 50% composition.

36 MATERIALS SCIENCE↗