Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Particle characterization”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1992

Boundary layer structure over the ocean observed by LEANDRE 1 during a tramontane event

A new airborne backscatter lidar, has been developed by CNRS (Service d'Aeronomie, (SA) Laboratoire de Meteorologie Dynamique (LMD) and the Institut des Sciences de 1'Univers) in the frame of the LEANDRE research program. It has been qualified on board the ARAT in autumn 1989 and spring 1990 and was involved in its first cooperative campaign during PYREX in October and November 1990. During this campaign, lidar observations of the perturbations induced on tropospheric flow and boundary layer structure were performed, and results are presented. A large number of experiments were performed, for synoptic situation description (meteorological radiosoundings, constant level balloons) and local flow analysis (aircrafts, radars, sodars). For the first time in such an experiment, a lidar has been flown on a research aircraft to perform altitude resolved observations of these perturbations, and we will present here results obtained for deflected flow structure. In the presence of a synoptic northerly flow, part of it is deflected to the east by the Pyrenees, and accelerated over the Mediterranean by the mountain surroundings. In this case, a low level wind is generated (the Tramontane) bringing cold and dry air over the Mediterranean Sea. As the sea is still at a warm temperature in November (around 17 degrees), an Internal Marine Boundary Layer rapidly grows over the first tens of kilometers and stabilizes at about 1 km depth, corresponding to an altitude just below the Lifting Condensation Level. The whole Marine Atmospheric Boundary Layer (MABL) is characterized by highly turbulent motions bringing large humid particles from the surface up to its top. The lidar signal due to scattering by these particles is then representative of the turbulent kinetic energy in this layer.

Flamant, C.↗
NASA NTRS1993

The nanosphere iron mineral(s) in Mars soil

A series of surface-modified clays containing nanophase (np) iron/oxyhydroxides of extremely small particle sizes, with total iron contents as high as found in Mars soil, were prepared by iron deposition on the clay surface from ferrous chloride solution. Comprehensive studies of the iron mineralogy in these 'Mars-soil analogs' were conducted using chemical extractions, solubility analyses, pH and redox, x ray and electron diffractometry, electron microscopic imaging specific surface area and particle size determinations, differential thermal analyses, magnetic properties characterization, spectral reflectance, and Viking biology simulation experiments. The clay matrix and the procedure used for synthesis produced nanophase iron oxides containing a certain proportion of divalent iron, which slowly converts to more stable, fully oxidized iron minerals. The noncrystalline nature of the iron compounds precipitated on the surface of the clay was verified by their complete extractability in oxalate. Lepidocrocite (gamma-FeOOH) was detected by selected area electron diffraction. It is formed from a double iron Fe(II)/Fe(III) hydroxyl mineral such as 'green rust', or ferrosic hydroxide. Magnetic measurements suggested that lepidocrocite converted to the more stable meaghemite (gamma-Fe203) by mild heat treatment and then to nanophase hematite (aplha-Fe203) by extensive heat treatment. Their chemical reactivity offers a plausible mechanism for the somewhat puzzling observations of the Viking biology experiments. Their unique chemical reactivities are attributed to the combined catalytic effects of the iron oxide/oxyhydroxide and silicate phase surfaces. The mode of formation of these (nanophase) iron oxides on Mars is still unknown.

Banin, A.↗
NASA NTRS1998

Ultrasonic Velocity Variations with Soil Composition for Moisture Measurement

Soil moisture content may be measured by many methods, but the presently available techniques all have drawbacks when used in ground truth measurements for remote sensing. Ultrasonic velocity varies with soil moisture content, and may be used as the basis of a new measurement technique. In order to characterize a sensor capable of field use, soil particle size distribution data are compared to ultrasonic velocity in a variety of soils over a wide moisture range.

Metzl, R.↗
NASA NTRS1992

Reflective Insulation

NRC-2 Superinsulation, manufactured by Metallized Products, Inc. (MPI), is designed for superconducting magnets used in MRI systems and particle accelerators. It is a thin, polyester film characterized by a unique crinkled surface that provides surface stand-off between layers and minimizes heat transfer in multilayer applications. NRC-2/Two is a two-sided metallized film. The material, originally developed as a skin for balloon-like satellites, was later used by NASA as a thermal barrier. MPI worked with NASA on the development of the original material and now supplies it for both space and consumer applications.

Source record↗
NASA NTRS1996

Two-stage model of radon-induced malignant lung tumors in rats: effects of cell killing

A two-stage stochastic model of carcinogenesis is used to analyze lung tumor incidence in 3750 rats exposed to varying regimens of radon carried on a constant-concentration uranium ore dust aerosol. New to this analysis is the parameterization of the model such that cell killing by the alpha particles could be included. The model contains parameters characterizing the rate of the first mutation, the net proliferation rate of initiated cells, the ratio of the rates of cell loss (cell killing plus differentiation) and cell division, and the lag time between the appearance of the first malignant cell and the tumor. Data analysis was by standard maximum likelihood estimation techniques. Results indicate that the rate of the first mutation is dependent on radon and consistent with in vitro rates measured experimentally, and that the rate of the second mutation is not dependent on radon. An initial sharp rise in the net proliferation rate of initiated cell was found with increasing exposure rate (denoted model I), which leads to an unrealistically high cell-killing coefficient. A second model (model II) was studied, in which the initial rise was attributed to promotion via a step function, implying that it is due not to radon but to the uranium ore dust. This model resulted in values for the cell-killing coefficient consistent with those found for in vitro cells. An "inverse dose-rate" effect is seen, i.e. an increase in the lifetime probability of tumor with a decrease in exposure rate. This is attributed in large part to promotion of intermediate lesions. Since model II is preferable on biological grounds (it yields a plausible cell-killing coefficient), such as uranium ore dust. This analysis presents evidence that a two-stage model describes the data adequately and generates hypotheses regarding the mechanism of radon-induced carcinogenesis.

NASA Program Radiation Health↗
NASA NTRS2006

An Assessment of NASA Glenn's Aeroacoustic Experimental and Predictive Capabilities for Installed Cooling Fans: Aerodynamic Performance - Part 1

Driven by the need for low production costs, electronics cooling fans have evolved differently than the bladed components of gas turbine engines which incorporate multiple technologies to enhance performance and durability while reducing noise emissions. Drawing upon NASA Glenn's experience in the measurement and prediction of gas turbine engine aeroacoustic performance, tests have been conducted to determine if these tools and techniques can be extended for application to the aerodynamics and acoustics of electronics cooling fans. An automated fan plenum installed in NASA Glenn's Acoustical Testing Laboratory was used to map the overall aerodynamic and acoustic performance of a spaceflight qualified 80 mm diameter axial cooling fan. In order to more accurately identify noise sources, diagnose performance limiting aerodynamic deficiencies, and validate noise prediction codes, additional aerodynamic measurements were recorded for two operating points: free delivery and a mild stall condition. Non-uniformities in the fan s inlet and exhaust regions captured by Particle Image Velocimetry measurements, and rotor blade wakes characterized by hot wire anemometry measurements provide some assessment of the fan aerodynamic performance. The data can be used to identify fan installation/design changes which could enlarge the stable operating region for the fan and improve its aerodynamic performance and reduce noise emissions.

VanZante, Dale E.↗
NASA NTRSDate not supplied

Airborne High Spectral Resolution Lidar Measurements of Aerosol Distributions and Properties During the NASA CAMP2Ex Mission

The NASA Clouds, Aerosols and Monsoon Processes-Philippines Experiment (CAMP2Ex) occurred during August-October, 2019,primarily over the ocean near the Philippines, including the ocean west of Luzon. CAMP2Ex attempts to characterize the role of anthropogenic and natural aerosol particles in modulating warm and mixed-phase precipitation in the maritime continent during the Southwest Monsoon. This mission is also examining relationships between spatial heterogeneity in the aerosol and cloud fields and radiative heating rates and studying the effects of aerosol concentration and composition on the microphysical properties of shallow cumulus and cumulus congestus clouds. Critical to the successful investigation of these objectives is profiling of aerosol, cloud and meteorological properties throughout the atmospheric column. For the CAMP2Ex experiment, we deployed the second generation NASA Langley airborne High Spectral Resolution Lidar (HSRL-2) on the NASA P-3 aircraft to obtain profile measurements of aerosol and thin cloud extinction and optical thickness via the HSRL technique at 355 and 532 nm, and of backscatter and depolarization at 355, 532, and 1064 nm. The HSRL technique allows for the independent measurement of extinction and backscatter without the need to assume modeled lidar ratios. Additional HSRL-2 data products include aerosol type, mixed layer depth, and range-resolved aerosol microphysical parameters. The HSRL measurements reveal the temporal, spatial, and vertical variability of aerosol optical properties over these locations. The HSRL-2 measured these backscatter, extinction, and depolarization profiles during all nineteen science flights and the transit flights to and from the aircraft operations base at Clark International Airport.In this presentation, we use these HSRL-2 measurements to show the horizontal and vertical distributions of aerosols in the CAMP2Ex operational area as well as provide insight into the optical and physical characteristics of these aerosols. We also discuss how these aerosols are distributed within and above the mixed layer.

aerosol↗
DOE OSTI2025

Effect of particle size and moisture on flow performance of loblolly pine anatomical fractions: Experimental findings and model predictions

The rising energy demand has highlighted biomass as a promising next-generation energy source. However, commercializing biomass-derived energy faces challenges, particularly in handling biomass feedstock. Factors like particle size, shape, moisture content, and surface roughness significantly impact biomass flowability. This study addresses a crucial knowledge gap by examining the effects of particle size and moisture content on the flow behavior and shear properties of different anatomical fractions of loblolly pine (Pinus taeda). The bulk shear behavior was examined using a Schulze ring shear tester, while flow performance was tested through gravity-driven flow experiments in a variable wedge-shape hopper. Results were incorporated into empirical and machine learning-based flow prediction models to evaluate their accuracy and limitations. The study found that samples with higher moisture content show higher unconfined yield strength. The critical arching distance increased with particle size, e.g., from approximately 13 and 33 mm for 2- and 6-mm whole chips, respectively at a 32-degree inclination angle. Conversely, the flow rate decreased for a given hopper opening as particle size increased. For instance, at a 60-mm hopper opening and a 32-degree inclination angle, the mass flow rates for 2- and 6-mm whole chips were 7.83 and 6.42 tonne/h, respectively. The empirical model consistently overpredicted the mass flow rate for all anatomical fractions, while the machine learning model more accurately predicted the central tendency of flow rate but was insensitive to varying tissue proportions. These novel findings provide comprehensive characterization of anatomical fractions, reveal significant combined effects of particle size and moisture content on biomass flow behavior, and demonstrate a better predictive accuracy of a machine learning model, all of which are useful for optimizing material handling strategies and biomass utilization technologies in the industry.

09 - BIOMASS FUELS↗
NASA NTRSDate not supplied

Seasonal, Spectral, and Regional Characterization of Deep Convective Clouds Top-of-Atmosphere Bidirectional Reflectance for Improved Satellite Intercalibration

The NASA CERES project provides the scientific community with regional broadband fluxes designed for long-term climate monitoring. The CERES climate quality dataset requires that the CERES instrument, as well as the MODIS and VIIRS imager records to be radiometrically stable over time. Deep Convective Clouds (DCCs) are spectrally uniform, near-Lambertian natural diffusers offering high signal-to-noise ratio and stable radiometric response in the VIS-NIR spectrum. For shortwave infrared (SWIR) wavelengths greater than 1.2µm, the DCC response is significantly influenced by cloud particle size and atmospheric absorption. Previous studies improved the characterization of the SWIR band DCC radiance, by using channel specific monthly empirical BRDFs as well as using the probability density function mean statistic to track the SWIR band stability. Also, that the DCC radiance is greater over land than over ocean and that the TWP DCC radiance has the lowest tropical DCC radiance. This study confirms and improves upon the previous studies. The study stratified the tropics regionally into land and ocean domains and applied their respective ocean-only and land-only empirical monthly BRDFs and normalized the land DCC BRDF corrected radiances with their ocean counterpart. This approach provided the most stable DCC response. The DCC BRDF corrected radiance monthly standard error was 0.24%, 0.62%, 0.59%, and 0.43% for the 1.24µm, 1.37µm, 1.61µm, and 2.25µm SWIR bands, which reduced the standard error 20%, 13%, 24%, and 26%, respectively when compared with the all-surface approach. The same approach was attempted over the Tropical Western Pacific and found not to be an improvement over the tropical domain. Further stratification of the tropical domain will need to balance sufficient sampling while accounting for regional DCC radiance differences.

Prathana Khakurel↗
DOE OSTI2022

Fine Ash-Bearing Particles as a Major Aerosol Component in Biomass Burning Smoke

Biomass burning (BB) events are occurring globally with increasing frequency, and their emissions are having more impacts on human health and climate. Large ash particles are recognized as a BB product with major influences on soil and water environments. However, fine-ash particles, which have diameters smaller than several microns and characteristic morphologies and compositions (mainly Ca and Mg carbonates), have not yet been explicitly considered as a major BB aerosol component either in field observations or climate models. This study measured BB aerosol samples using transmission electron microscopy (TEM) and ion chromatography during the Fire Influence on Regional to Global Environments and Air Quality (FIREX-AQ) campaign. We show that significant amounts of fine ash-bearing particles are transported >100 km from their fire sources. Our environmental chamber experiments suggest that they can act as cloud condensation and ice nuclei. We also found considerable amounts of fine ash-bearing particles in the TEM samples collected during previous campaigns (Biomass Burning Observation Project and Megacity Initiative: Local and Global Research Observations). These ash particles are commonly mixed with organic matter and make up ~8% and 5% of BB smoke by number and mass, respectively, in samples collected during the FIREX-AQ campaign. The measured ash-mass concentrations are approximately five times and six times greater than those of BB black carbon and potassium, respectively, scaling to an estimated global emission of 11.6 Tg yr -1 with a range of 8.8–16.3 Tg yr -1 . Better characterization and constraints on these fine ash-bearing particles will improve BB aerosol measurements and strengthen assessments of BB impacts on human health and climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2018

A Closure Study of Total Scattering Using Airborne In Situ Measurements from the Winter Phase of TCAP

We examine the performance of our approach for calculating the total scattering coefficient of both non-absorbing and absorbing aerosol at ambient conditions from aircraft data. Our extended examination involves airborne in situ data collected by the U.S. Department of Energy’s (DOE) Gulf Stream 1 aircraft during winter over Cape Cod and the western North Atlantic Ocean as part of the Two-Column Aerosol Project (TCAP). The particle population represented by the winter dataset, in contrast with its summer counterpart, contains more hygroscopic particles and particles with an enhanced ability to absorb sunlight due to the larger fraction of black carbon. Moreover, the winter observations are characterized by more frequent clouds and a larger fraction of super-micron particles. We calculate model total scattering coefficient at ambient conditions using size spectra measured by optical particle counters (OPCs) and ambient complex refractive index (RI) estimated from measured chemical composition and relative humidity (RH). We demonstrate that reasonable agreement (~20% on average) between the observed and calculated scattering can be obtained under subsaturated ambient conditions (RH < 80%) by applying both screening for clouds and chemical composition data for the RI-based correction of the OPC-derived size spectra.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

The Importance of Surface Oxygen for Lithiation and Morphology Evolution during Calcination of High-Nickel NMC Cathodes

Nanoscale morphology has a direct impact on the performance of materials for electrochemical energy storage. Despite this importance, little is known about the evolution of primary particle morphology nor its effect on chemical pathways during synthesis. In this work, operando characterization is combined with atomic-scale and continuum simulations to clarify the relationship between morphology of cathode primary particles and their lithiation during calcination of LiNi 0.8 Mn 0.1 Co 0.1 O 2 (NMC-811). This combined approach reveals a key role for surface oxygen adsorption in facilitating the lithiation reaction by promoting metal diffusion and oxidation, and simultaneously providing surface sites for lithium insertion. Furthermore, oxygen surface termination is shown to increase the activation energy for sintering, leading to smaller primary particle sizes at intermediate temperatures. Smaller particles provide both shorter diffusion lengths for lithium incorporation and increased surface site density for lithium insertion. These insights provide a foundation for more tailored syntheses of cathode materials with optimized performance characteristics.

25 ENERGY STORAGE↗
NASA NTRS2006

Genesis Solar Wind Sample Curation: A Progress Report

In the year since the Genesis solar wind collector fragments were returned, early science samples, specimens for cleaning experiments, and science allocations have been distributed. Solar wind samples are stored under nitrogen and handled in an ISO Class 4 (Class 10) laboratory. For array collector fragments, a basic characterization process has been established. This characterization consists of identification of solar wind regime, whole fragment image for identification and surface quality, higher magnification images for contaminant particle density, and assessment of molecular film contaminant thickness via ellipsometry modeling. Compilations of this characterization data for AuOS (gold film on sapphire), and sapphire from the bulk solar wind for fragments greater than 2 cm are available. Removal of contaminant particles using flowing ultrapure water (UPW) energized megasonically is provided as requested.

Allton, Judith H.↗
DOE OSTI2017

Electron tomography and fractal aspects of MoS 2 and MoS 2 /Co spheres

A study was made by a combination of 3D electron tomography reconstruction methods and N 2 adsorption for determining the fractal dimension for nanometric MoS 2 and MoS 2 /Co catalyst particles. DFT methods including Neimarke-Kiselev’s method allowed to determine the particle porosity and fractal arrays at the atomic scale for the S-Mo-S(Co) 2D- layers that conform the spherically shaped catalyst particles. A structural and textural correlation was sought by further characterization performed by x-ray Rietveld refinement and Radial Distribution Function (RDF) methods, electron density maps, computational density functional theory methods and nitrogen adsorption methods altogether, for studying the structural and textural features of spherical MoS 2 and MoS 2 /Co particles. Neimark-Kiselev’s equations afforded the evaluation of a pore volume variation from 10 to 110 cm 3 /g by cobalt insertion in the MoS 2 crystallographic lattice, which induces the formation of cavities and throats in between of less than 29 nm, with a curvature radius r k < 14.4 nm; typical large needle-like arrays having 20 2D layers units correspond to a model consisting of smooth surfaces within these cavities. Decreasing D P , D B , D I and D M values occur when Co atoms are present in the MoS 2 laminates, which promote the formation of smoother edges and denser surfaces that have an influence on the catalytic properties of the S-Mo-S(Co) system.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Computational Fluid Dynamics Simulations to Assess Spatial Variability and Optimal Ventilation Scenarios for Biological Laboratory Exposures

A significant amount of uncertainty exists regarding potential human exposure to laboratory biomaterials and organisms in Biosafety Level 2 (BSL-2) research laboratories. Computational fluid dynamics (CFD) modeling is proposed as a way to better understand potential impacts of different combinations of biomaterials, laboratory manipulations, and exposure routes on risks to laboratory workers. Here, in this study, we use CFD models to simulate airborne concentrations of contaminants in an actual BSL-2 laboratory under different configurations. Results show that ventilation configuration, sampling location, and contaminant source location can significantly impact airborne concentrations and exposures. Depending on the source location and airflow patterns, the transient and time-integrated concentrations varied by several orders of magnitude. Contaminant plumes from sources located near a return vent (or exhaust like a fume hood or ventilated biosafety cabinet) are likely to be more contained than sources that are further from the exhaust. Having a direct flow between the source and the exhaust (through-flow condition) may reduce potential exposures to individuals outside the air flow path. Designing a BSL-2 room with ventilation and airflow patterns that maximize through-flow conditions to the return/exhaust vents and minimize dispersion and mixing throughout the room is, therefore, recommended. CFD simulations can also be used to assist in characterizing the impacts of supply and return vent locations, room layout, and source locations on spatial and temporal contaminant concentrations. In addition, proper placement of particle sensors can also be informed by CFD simulations to provide additional characterization and monitoring of potential exposures in BSL-2 facilities.

63 RADIATION, THERMAL, AND OTHER ENVIRON. POLLUTAN↗
DOE OSTI2024

Dual particle imaging: Applications in security and environmental imaging

Radiation imaging detectors have been applied in a variety of fields for detection, localization and characterization of radioactive sources. In this work, we describe a handheld detection system (H2DPI) that can simultaneously image neutrons and gamma rays, and reconstruct the energy spectra of the incident particles. This system was applied to the detection and characterization of a plutonium metal source in experiments performed at the National Criticality Experiments Research Center, where the 4.5 kg plutonium source was placed approximately 60 cm from the H2DPI. Neutron and gamma-ray images were measured that show good agreement with the known location of the source. Furthermore, the H2DPI was also used to measure the neutron spectrum, which shows the expected shape of a Watt fission spectrum, and the gamma-ray energy spectrum, which shows the energies common to plutonium metal. Finally, we describe the application of the H2DPI in augmented reality, whereby real-time neutron and gamma-ray imaging data can be streamed to the Microsoft HoloLens to allow the user to visualize the source locations.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2019

Spatially Resolved Product Speciation during Struvite Synthesis from Magnesite (MgCO 3 ) Particles in Ammonium (NH 4 + ) and Phosphate (PO 4 3– ) Aqueous Solutions

While population growth necessitates a significant increase in crop production, stringent environmental regulations require that it be done using sustainable nutrient sources. Nutrients in the form of NH 4 + and PO 4 3– are recovered from wastewater streams via precipitation, using water-soluble magnesium ions to form sustainable, slow-release fertilizer, struvite (MgNH 4 PO 4 ·6H 2 O). Furthermore, the magnesium needed is mainly incorporated in the crystal lattices of very low-solubility minerals. This work utilizes a combination of powder X-ray diffraction (pXRD) and ex situ Raman and energy-dispersive X-ray spectroscopies combined with ion chromatography to characterize transformation products of low-solubility MgCO 3 particles in NH 4 + - and PO 4 3– - containing aqueous solutions with and without Ca 2+ ions present.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Experimental Determination of the Relationship Between Organic Aerosol Viscosity and Ice Nucleation at Upper Free Tropospheric Conditions

Abstract This work presents measurements of the ice nucleating ability of secondary organic material recorded between −40 and −70°C and relative humidity with respect to ice (RH ice ) between 150% and 220%. For a subset of systems, temperature and humidity dependence of particle viscosity as well as dry glass transition temperature were characterized using the dual tandem differential mobility analyzer method. Eleven unique monoterpene, sesquiterpene and aromatic precursors were used to generate secondary organic material (SOM) using either an oxidation flow reactor (OFR) or an environmental chamber (EC). For the SOM for which viscosity was measured, the particle glass transition temperatures varied between 6 and 23°C ( n = 8). Measurements were performed to verify that increased relative humidity did not plasticize the particles below −10°C at residence times similar to those in the ice nucleation instrument. No heterogeneous ice nucleation was observed at the ∼0.5% onset threshold for any of the materials generated. The ice nucleation occurs by the freezing of SOM solution droplets consistent with homogeneous freezing indicating that they form an aqueous solution, or the SOM particles required water saturation to freeze, indicating that they were hydrophobic. Experiments exploring the influence of functional groups and mass loading did not reveal any obvious influence of particle chemistry or generation conditions on the results. Close structural matches between known organic ice nucleating particles as precursor or formed products did not yield materials that promoted freezing. These experiments suggest that heterogeneous ice formation of glassy secondary organic materials is likely uncommon under upper free tropospheric conditions.

54 ENVIRONMENTAL SCIENCES↗