Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “POINT SOURCE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Effects of line width and spatial extent on measurements of the 0.51 MeV Galactic center line

Over the past 15 years, a number of measurements have been made of positron-electron annihilation radiation from the Galactic Center region. The results after 1979 show a significant decrease in measured flux intensity from that previously observed with the same instruments. This is probably due to time variations; however, the contributions of a spatially extended and/or energy-broadened component should also be considered. The entire data set is consistent with a time variable point source plus a distribution along the Galactic Disk. There is no strong evidence for a component broadened in energy.

Dunphy, P. P.↗

Contributions to the finite element solution of the fan noise radiation problem

The radiation of fan generated noise to the far field from a nacelle of realistic geometry is investigated using the finite element method. Several innovations have been introduced to minimize the computational requirements and create a highly efficient numerical scheme. The innovations include: (1) formulation of the problem in terms of velocity potential and density in such a way that no inlet mean flow velocity derivatives are required in the field equations, (2) the use of 'wave envelope' elements in an outer region permitting a grid much coarser than would be used for conventional finite elements, (3) the use of a mesh which deforms with an increase of forward flight speed so that mesh lines are always lines of constant phase and rays for a point source, permitting the use of wave envelope elements and simple boundary conditions for any case of forward velocity, (4) an efficient scheme for introducing the noise source via modal amplitude coefficients, and (5) the use of a frontal solution technique which for physically realistic problems drastically reduces the active storage requirements. The finite element scheme is outlined, as are the specific details of the innovations. Results are given for cases where comparable experimental data are available.

Eversman, W.↗

Measurement of acoustic shielding by a turbulent jet

The acoustic shielding properties of a turbulent jet have been investigated experimentally. The experimental arrangement consisted of an acoustic point source and a turbulent shielding jet. The source and jet parameters investigated include the source frequency, source spectrum, jet velocity, jet heating by simulation and the lateral and longitudinal source positions with respect to the shielding jet. It is found that the maximum sound attenuation provided by the shielding jet depends on the balance between refraction and diffraction. Over the frequency range investigated, the redistribution of sound by the shielding air jet is power conserving. Comparison between measurement and prediction based on an idealized cylindrical uniform jet model indicates that the spreading and decay of the flow field in real jets are important. Comparisons between the present data trends and those reported for jet-by-jet shielding suggest that the major effects observed in the latter are acoustical rather than aerodynamical.

Yu, J. C.↗

Noise constraints effecting optimal propeller designs

A preliminary design tool for advanced propellers was developed combining a fast vortex lattice aerodynamic analysis, a fast subsonic point source noise analysis, and an optimization scheme using a conjugate directions method. Twist, chord and sweep distributions are optimized to simultaneously improve both the aerodynamic performance and the noise observed at a fixed relative position. The optimal noise/performance tradeoffs for straight and advanced concept blades are presented. The techniques used include increasing the blade number, blade sweep, reducing the rotational speed, shifting the spanwise loading and diameter changes.

Miller, C. J.↗

Model Experiments with Slot Antenna Arrays for Imaging

A prototype imaging system at 31 GHz was developed, which employs a two-dimensional (5x5) array of tapered slot antennas, and integrated detector or mixer elements, in the focal plane of a prime-focus paraboloid reflector, with an f/D=1. The system can be scaled to shorter millimeter waves and submillimeter waves. The array spacing corresponds to a beam spacing of approximately one Rayleigh distance and a two-point resolution experiment showed that two point-sources at the Rayleigh distance are well resolved.

Johansson, J. F.↗

DE-1 phase 3 extended mission data analysis of Dynamics Explorer retarding ion mass spectrometer flight data

Field-aligned motion of ionospheric ions at a low altitudes and different pitch angle distributions of ionospheric ions at high altitudes were studied. The objective is twofold: (1) to discover the degree to which observations made by Dynamics Explorer 1 (DE-1) and DE-2 agree when taken in the same ionospheric volume; (2) to understand the processes operating along a magnetic field tube connecting DE-1 and DE-2 that allow a reconciliation of the two data sets. A second investigation has two facets; to reconcile the observed occurrence of ionospheric ions at high altitudes with a point source injection in the ionosphere and subsequent E x B drift, and to reconcile the observed fluxes of ionospheric ions at high altitudes with the measured upward flux at low altitudes. An understanding of the effects of E x B drift molten on the dispersion of ionospheric ions is attained.

Source record↗

IUE and IRAS observations of luminous M stars with varying gas-to dust ratios

Circumstellar gas and dust surrounding M giants and supergiants show luminous M stars to split into two distinct classes. Stars with a high gas to dust ratio all show chromospheric Ca II, H, and K emission. Stars with a high dust to gas ratio do not show chromospheric Ca II emission but are the only ones to show Balmer emission indicative of atmospheric shocks and are also the only ones to show maser emission. In order to determine whether all chromospheric indicators disappear in high dust to gas ratio stars, a survey of stars in both these classes was conducted with the IUE satellite. Long wavelength infrared fluxes for the program stars were obtained from the IRAS point source catalog. There is no obvious difference in the long wavelength observations between the two groups of stars. The long wavelength excess tends to follow the 10 micron excess and not the dust to gas ratio.

Hagen, W.↗

The homestake surface-underground scintillators: Initial results

The first 70 tons of the 140-ton Large Area Scintillation Detector (LASD) have been operating since Jan. 1985 at a depth of 4850 ft. (4200 m.w.e.) in the Homestake Gold Mine, Lead, S.D. A total of 4 x 10(4) high-energy muons (E sub mu is approx. 2.7 TeV at the surface) have been detected. The remainder of the detector is scheduled to be in operation by the Fall of 1985. In addition, a surface air shower array is under construction. The first 27 surface counters, spaced out over an area of 270' x 500', began running in June, 1985. The LASD performance, the potential of the combined shower array and underground muon experiment for detecting point sources, and the initial results of a search for periodic emission from Cygnus X-3 are discussed.

Cherry, M. L.↗

An X-ray study of M51 (NGC 5194) and its companion (NGC 5195)

The galaxy M51 and its companion NGC 5195 were observed with the Einstein High-Resolution Imager. The X-ray observations led to the detection of both galaxies with (0.2-4.0 keV) X-ray luminosities of 3.0 x 10 to the 40th ergs/s and 2.1 x 10 to the 39th ergs/s respectively. M51 and its companion are compared to other spiral and irregular galaxies observed in X-rays, and the various components of the X-ray emission of M51 (i.e., nucleus, point sources, and unresolved extended emission) are discussed.

Palumbo, G. G. C.↗

Fine guidance sensor design optimization for Space Infrared Telescope Facility (SIRTF)

The present paper is concerned with the general issues of design optimization of a staring mosaic sensor for guide-star tracking, taking into account the choice of the proper interpolation algorithm. It was found that the final choice of algorithm depends on the severity of the positional accuracy requirement and the expected variation in the blur spot shape. The considered track algorithms estimate the position either of the peak or of the centroid of the image of a point source. Attention is given to aspects of problem definition, the total effect of error sources on algorithm accuracy, a parametric analysis of performance behavior, Monte Carlo results, and the design of the SIRTF Fine Guidance Sensor (FGS). The algorithm error, the signal-to-noise error, and the nonuniformity error are examined.

Grossman, S. B.↗

Images in the rocket ultraviolet - The stellar population in the central bulge of M31

Imagery of the bulge of M31 obtained with a rocket-borne telescope in two broad bands centered at 1460 A and 2380 A is discussed. The UV spatial profiles over a region about 200 arcsec wide are identical with those at visible wavelengths. The absence of detectable point sources indicates that main-sequence stars hotter than B0 V are not present in the bulge. It is suggested that the far-UV flux in old stellar populations originates in post-AGB stars. The UV flux from such stars is extremely sensitive to age and the physics of their previous mass loss.

Bohlin, R. C.↗

IRAS observations of matter around nearby stars

A systematic search of the IRAS point-source catalog has led to the identification of eight new nearby stars that are Vega-like in terms of their large 60-micron excess. These stars are distinguished by the predominance of spectral type A and the absence of double stars in the Vega-like group. Both effects are intuitively consistent with the interpretation that the 60-micron excess radiation is due to a disk of protoplanetary material, suggesting an early phase in the evolution of a planetary system; however, this distribution can also be due to luminosity and brightness selection effects.

Aumann, H. H.↗

Absolute calibration for SAR systems

Absolute calibration of synthetic aperture radar data is desirable for space and time continuity in earth resource investigations. For this purpose, a calibration signal is used to compare data from a calibration flight, during which precision reflectors are imaged, to data from subsequent SAR flights. The calibration signal duplicates the SAR response from a point source. This signal is amplified and converted by the radar system and processed in precisely the same way as data.

Jackson, P. L.↗

Factors influencing the ultrasonic stress wave factor evaluation of composite material structures

To demonstrate that the finite-element model can be used to investigate some of the factors influencing the ultrasonic stress wave evaluation of materials, a hypothetical case was studied in which classical vibration theory was used. Vibration analysis and experiments for the undamaged case were conducted on an isotropic aluminum plate and a unidirectional graphite-epoxy plate, using a point source to excite the plates. The finite-element solution correlated within eight percent with the exact method. The frequencies predicted by the finite-element model were observed in the experiments in both plates, although in the composite plate, additional frequencies were observed which could not be accounted for. Damaged isotropic plates were also considered. The effects of increasing damage severity with constant damage area, and increasing damage area with constant severity on the resonant frequencies were analyzed.

Rebello, C. J.↗

The third image, the redshift of the lens, and new components of the gravitational lens 2016 + 112

Three new observations of the gravitational lens system 2016 + 112 are reported. A new, more sensitive spectrograph has produced a redshift for the red galaxy D, and direct imaging through a narrowband filter centered on the Lyman alpha line of the lensed object has detected a previously unknown point source and two radio-quiet extended emission line regions, all apparently at the redshift of the two brighter images A and B. Some preliminary results from a new VLA map of the system are reported, and the implications of the results for models of gravitational lenses are discussed.

Schneider, D. P.↗

X-raying the dynamics of globular clusters

Major investigations of globular cluster content, internal dynamical structure, and long-term cluster evolution stimulated by X-ray observations are reviewed. The large-scale structure and motions of globulars as revealed by the recently discovered diffuse X-ray emission which may arise from their motion through the interstellar medium of the Galaxy are discussed, and the results of surveys for point sources in globulars are reviewed. The derived luminosity function for these sources out to 10 core radii suggest they are compact binaries containing either degenerate dwarf or neutron star remnants and were formed by tidal capture within the cluster cores. The possibility is considered that the formation and existence of compact binary X-ray sources contributes to the rapid demise of clusters by first heating the cores and causing the clusters to expand, after which they can be more easily disrupted by tidal forces and giant molecular clouds in the Galaxy.

Grindlay, J. E.↗

Radiative transfer in multilayered random medium with laminar structure - Green's function approach

For a multilayered random medium with a laminar structure a Green's function approach is introduced to obtain the emitted intensity due to an arbitrary point source. It is then shown that the approach is applicable to both active and passive remote sensing. In active remote sensing, the computed radar backscattering cross section for the multilayered medium includes the effects of both volume multiple scattering and surface multiple scattering at the layer boundaries. In passive remote sensing, the brightness temperature is obtained for arbitrary temperature profiles in the layers. As an illustration the brightness temperature and reflectivity are calculated for a bounded layer and compared with results in the literature.

Karam, M. A.↗

Prediction of sound fields in cavities using boundary element methods

Two boundary element formulations of acoustical behavior exist; the Direct Boundary Element Methods (DBEM) based on the Helmholtz Integral Equations and the Indirect Boundary Element Methods (IBEM) based on Huygen's Principle. In this investigation, both methods are implemented utilizing a simple linear superparametric element. In addition the IBEM is studied using a quadratic isoparametric element. The accuracy and relative efficiency of the various techniques are examined. In order to properly model aircraft interior cavities the additional capability to model wall treatments and internal point sources is added to the methods. The procedures are verified for several well-understood cavity problems. The relative merits of each boundary element method and the finite element method are examined.

Bernhard, R. J.↗