Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PLASTICITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Disease resistance in coral is mediated by distinct adaptive and plastic gene expression profiles

Infectious diseases are an increasing threat to coral reefs, resulting in altered community structure and hindering the functional contributions of disease-susceptible species. We exposed seven reef-building coral species from the Caribbean to white plague disease and determined processes involved in (i) lesion progression, (ii) within-species gene expression plasticity, and (iii) expression-level adaptation among species that lead to differences in disease risk. Gene expression networks enriched in immune genes and cytoskeletal arrangement processes were correlated to lesion progression rates. Whether or not a coral developed a lesion was mediated by plasticity in genes involved in extracellular matrix maintenance, autophagy, and apoptosis, while resistant coral species had constitutively higher expression of intracellular protein trafficking. This study offers insight into the process involved in lesion progression and within- and between-species dynamics that lead to differences in disease risk that is evident on current Caribbean reefs.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2011

Brittle-plastic relaxation of misfit stresses in the Si(001)/Si{sub 1-x}Ge{sub x} system

It is found that stressed luminescent samples of Si(001)/Si{sub 1-x}Ge{sub x}/Si with a germanium concentration of up to 16% contain microcracks. In contrast to ordinary cracks, microcracks are characterized by partial cracks of the substrate that are not perpendicular to the plane of the plate and are detected by specially designed X-ray analysis techniques. In a 60-nm-thick layer of SiGe with a germanium concentration of 5%, individual microcracks arise in samples near the edges of the same type, and the traces of these microcracks coincide with the ripple profiles of the corrugated growth surface. As the germanium concentration increases, first, the number of microcracks near the edges of a sample increases, while the corrugated growth relief nearly completely disappears, and then microcracks appear even in the central region of the sample, thus leading to the vanishing of the curvature of the structure in this region without visible signs of plastic relaxation. At the same time, even a thin (20 nm) layer of SiGe exhibits a layered structure, and diffuse scattering near the peak of the SiGe layer increases, which points to the presence of fragments of the layer that are misoriented by {+-}0.015 Degree-Sign ; the intensity of the diffuse scattering may amount to 0.5% of the layer intensity. A spatial analysis of the luminescence of samples with microcracks shows that the emergence of microcracks hardly affects the peak position and the half-width of the emission line of the SiGe layer. At the same time, the intensity of exciton emission from both the SiGe layer and the bulk of silicon is significantly (several times) changed when passing to the regions with microcracks. All the phenomena observed can be accounted for under the assumption that, between the stages of the loss of the plane crystallization front and the development of plastic relaxation of misfit stresses, there exists an earlier unknown stage of growth in which the concentration of nonequilibrium vacancies increases by four to five orders of magnitude and then the vacancies condensate into micropores.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Plasticizer-Free Gradient-Crosslinked Polyurethane Electrolyte for Room-Temperature Solid-State Lithium Batteries

Polymer-based solid-state electrolytes are promising for next-generation lithium metal batteries, yet their limited ionic conductivity and mechanical stability at ambient conditions remain key challenges. Herein, we report a novel gradient crosslinked polymer electrolyte (PU/PUA/PU) synthesized via a sequential in situ UV-curing process that integrates a mechanically robust polyurethane acrylate (PUA) core with soft linear polyurethane (PU) interfaces. This all-solid membrane operates without any liquid plasticizer and the interfacial PU layers ensure low interfacial resistance and intimate electrode contact, while the PUA core provides enhanced dimensional stability and dendrite suppression. As a result, the gradient electrolyte delivers an impressive ∼2.6 × 10 −4 S cm −1 ionic conductivity at 25 °C (two orders of magnitude higher than conventional PEO) and remains electrochemically stable >5 V (vs Li + /Li). Structural analysis confirms the formation of a well-defined crosslinked network with suppressed crystallinity and expanded interchain spacing. Electrochemical impedance spectroscopy (EIS) and linear sweep voltammetry (LSV) further validate these properties. When applied in a Li||NMC811 cell, the PU/PUA/PU electrolyte delivers stable cycling with high capacity at both 60 °C and 25 °C, demonstrating its potential for room-temperature solid-state battery applications without reliance on plasticizers or heating. In conclusion, this gradient design offers a practical path toward ambient-condition operation of solid-state lithium batteries, providing a paradigm for overcoming the traditional trade-off between ionic conductivity and mechanical robustness.

25 ENERGY STORAGE↗
DOE OSTI2023

Nir/ai Identification Of Waste Plastics

The program reads a near infrared reflectance (NIR) spectrum from an item of plastic waste, and identifies the type of plastic using an AI model. The spectra and results are displayed to the operator, and recorded in a database.

Bonebright, PatrickN [Idaho National Laboratory (I↗
DOE OSTI2017

Plastic Recycling Emissions And Economics (prise) Model

To provide more information to researchers and potential adopters of flexible plastic packaging recycling products, the SD model was developed to provide more information regarding the economics and greenhouse gas (GHG) emissions of potential rFlex (recycled flexible plastic packaging) products. Additionally, the model aimed to provide more insight into potential scenarios and/or policies that could be enacted to improve the economic and GHG emission outcomes of rFlex.

Severson, MichaelH [Idaho National Laboratory (INL↗
DOE OSTI2023

plastic-abm [SWR 23-74]

The plastic agent-based model (ABM) built with the MESA python library simulates agents decisions to recycle plastic waste according to an extended version of the theory of planned behavior.

Walzberg, Julien↗
DOE OSTI2023

Low-velocity repeated impact behaviors of Polymer Fiber Reinforced Plastics (PFRPs)

Modern fiber-reinforced composites have become ubiquitous across multiple industries due to their excellent weight-to-strength ratio. Typically glass or carbon fibers are widely used. While Glass or Carbon Fiber-Reinforced Plastics (GFPRs or CFPRs) have good stiffness, strength, and fatigue life, they are expensive and difficult to recycle. Researchers are exploring Polymer Fiber-Reinforced Plastics (PFRPs) as an alternative solution. PFRPs utilize polymer fibers and a polymer matrix. A wide range of materials options is available, including low-cost thermoplastics such as polyethylene or polypropylene. These thermoplastics are easy to handle and recyclable without special methods. Manufacturing parts using thermoplastics are well-established as well. However, their mechanical performances have not been extensively studied compared to GFRPs or CFRPs. This study examines the low-velocity impact resistance of PFRPs made of different thermoplastics. The low-velocity impacts are applied through a drop-weight tower. The experiment is divided into two cases: a single perforation impact and low-energy repeated impacts. Energy absorption and the number of impacts to failure are measured. The results are compared to traditional CFRPs which have a thermoset matrix. The PFRPs demonstrate energy absorption capabilities comparable to or greater than those of CFRPs with respect to specimen thickness and density. Additionally, the PFRPs show significantly higher impacts-to-failure than the CFRPs in low-energy repeated impact tests. This is particularly noteworthy considering that the PFRPs are much simpler and more economical to manufacture than CFRPs. To further

Ko, Seunghyun↗
DOE OSTI2012

Probing the Informational and Regulatory Plasticity of a Transcription Factor DNA–Binding Domain

Transcription factors have two functional constraints on their evolution: (1) their binding sites must have enough information to be distinguishable from all other sequences in the genome, and (2) they must bind these sites with an affinity that appropriately modulates the rate of transcription. Since both are determined by the biophysical properties of the DNA–binding domain, selection on one will ultimately affect the other. We were interested in understanding how plastic the informational and regulatory properties of a transcription factor are and how transcription factors evolve to balance these constraints. To study this, we developed an in vivo selection system in Escherichia coli to identify variants of the helixturn-helix transcription factor MarA that bind different sets of binding sites with varying degrees of degeneracy. Unlike previous in vitro methods used to identify novel DNA binders and to probe the plasticity of the binding domain, our selections were done within the context of the initiation complex, selecting for both specific binding within the genome and for a physiologically significant strength of interaction to maintain function of the factor. Using MITOMI, quantitative PCR, and a binding site fitness assay, we characterized the binding, function, and fitness of some of these variants. We observed that a large range of binding preferences, information contents, and activities could be accessed with a few mutations, suggesting that transcriptional regulatory networks are highly adaptable and expandable.

59 BASIC BIOLOGICAL SCIENCES↗
DOE OSTI2023

Resolving intragranular stress fields in plastically deformed titanium using point-focused high-energy diffraction microscopy

Abstract The response of a polycrystalline material to a mechanical load depends not only on the response of each individual grain, but also on the interaction with its neighbors. These interactions lead to local, intragranular stress concentrations that often dictate the initiation of plastic deformation and consequently the macroscopic stress–strain behavior. However, very few experimental studies have quantified intragranular stresses across bulk, three-dimensional volumes. In this work, a synchrotron X-ray diffraction technique called point-focused high-energy diffraction microscopy (pf-HEDM) is used to characterize intragranular deformation across a bulk, plastically deformed, polycrystalline titanium specimen. The results reveal the heterogenous stress distributions within individual grains and across grain boundaries, a stress concentration between a low and high Schmid factor grain pair, and a stress gradient near an extension twinning boundary. This work demonstrates the potential for the future use of pf-HEDM for understanding the local deformation associated with networks of grains and informing mesoscale models. Graphical abstract

36 MATERIALS SCIENCE↗
DOE OSTI2013

Compatibility Study for Plastic, Elastomeric, and Metallic Fueling Infrastructure Materials Exposed to Aggressive Formulations of Isobutanol-blended Gasoline

The Energy Independence and Security Act (EISA) of 2007 is an omnibus energy policy law designed to move the United States toward greater energy security and independence. A key provision of EISA is the Renewable Fuel Standard (RFS), which requires the nation to use 36 billion gallons per year (BGPY) of renewable fuel in vehicles by 2022. Ethanol is the most widely used renewable fuel, and increasing the allowable ethanol content from 10% to 15% is expected to push renewable fuel consumption to as much as 21 BGPY. Therefore, a large portion of the 36 billion gallon requirement can be met by increasing the ethanol content in gasoline to 15%. However, raising the ethanol content to 15%, by itself, will still not fully meet the RSF requirement, and concerns have been raised that this increase in ethanol may not be entirely compatible with current and legacy materials used in standard gasoline fueling systems. In the summer of 2008, the U.S. Department of Energy (DOE) recognized the need to assess the impact of intermediate blends of ethanol on the fueling infrastructure, specifically those systems located at the fueling station. A short time later (March 2009), Growth Energy (a coalition of ethanol producers and supporters) requested a waiver from the U.S. Environmental Protection Agency (EPA) to allow the use of 15% ethanol in gasoline. In 1981 the EPA approved a waiver (known as the OCTAMIX waiver) that allowed other alcohol types (such as methanol) to be blended with gasoline as long as the resulting fuel blend was substantially similar to gasoline. Another requirement is that the fuel oxygen content cannot exceed 3.7 wt %. Currently, this requirement limits ethanol in gasoline to 10 vol %. The corresponding oxygen equivalent for isobutanol is 16 vol %; therefore, isobutanol offers a pathway towards meeting the RFS requirement by allowing greater biofuel usage than can be achieved by ethanol alone. In fact, the United States has already hit the “blend wall” for ethanol, the point at which virtually all gasoline sold is E10 and no remaining market is left for ethanol, meaning that the country cannot substantially increase ethanol usage unless the EPA allows for higher levels of ethanol or until E85 use is expanded significantly. Butamax Advanced Biofuels, LLC has developed proprietary technologies to convert corn into isobutanol. Much of the infrastructure already existing at ethanol plants can be readily converted to produce isobutanol instead. The focus of this investigation was to compare the compatibility of fueling infrastructure materials (such as elastomers, plastics, and metals) to test fuels representing E10 and E15 and their corresponding oxygen equivalents with isobutanol (iBu16 and iBu24). Butamax sponsored a research project at Oak Ridge National Laboratory (ORNL) to perform empirical studies using aggressive fuel formulations representing 16 and 24% isobutanol. The results contained within this report include a solubility analysis for each material type and fuel formulation and empirical results for elastomers, plastics, and metals. Data obtained from the preceding ethanol compatibility studies on these materials are included for additional interpretation and summary.

Kass, Michael D.↗
DOE OSTI2015

Modeling a Newtonian Fluid with a Rate-Dependent, Von Mises Plasticity Model for Solid Mechanics Applications

This memo derives a particular use of a rate-dependent, perfectly plastic Von Mises Plasticity constitutive model that represents a Newtonian (or Bingham) fluid. Only two parameters are needed: the viscosity and bulk modulus to complete the model parameterization. Under certain deformations, the model exactly represents a Newtonian fluid. Under others, the model shear thins. A Newtonian fluid representation may be used in confined flow applications in which a fluid-solid interaction is desired but code coupling is not.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2015

Unified Creep Plasticity Damage (UCPD) Model for Rigid Polyurethane Foams

Numerous experiments were performed to characterize the mechanical response of several different rigid polyurethane foams (FR3712, PMDI10, PMDI20, and TufFoam35) to large deformation. In these experiments, the effects of load path, loading rate, and temperature were investigated. Results from these experiments indicated that rigid polyurethane foams exhibit significant volumetric and deviatoric plasticity when they are compressed. Rigid polyurethane foams were also found to be very strain-rate and temperature dependent. These foams are also rather brittle and crack when loaded to small strains in tension or to larger strains in compression. Thus, a new Unified Creep Plasticity Damage (UCPD) model was developed and implemented into SIERRA with the name Foam Damage to describe the mechanical response of these foams to large deformation at a variety of temperatures and strain rates. This report includes a description of recent experiments and experimental findings. Next, development of a UCPD model for rigid, polyurethane foams is described. Selection of material parameters for a variety of rigid polyurethane foams is then discussed and finite element simulations with the new UCPD model are compared with experimental results to show behavior that can be captured with this model.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Creating physically-based three-dimensional microstructures: Bridging phase-field and crystal plasticity models.

In order to better incorporate microstructures in continuum scale models, we use a novel finite element (FE) meshing technique to generate three-dimensional polycrystalline aggregates from a phase field grain growth model of grain microstructures. The proposed meshing technique creates hexahedral FE meshes that capture smooth interfaces between adjacent grains. Three dimensional realizations of grain microstructures from the phase field model are used in crystal plasticity-finite element (CP-FE) simulations of polycrystalline a -iron. We show that the interface conformal meshes significantly reduce artificial stress localizations in voxelated meshes that exhibit the so-called "wedding cake" interfaces. This framework provides a direct link between two mesoscale models - phase field and crystal plasticity - and for the first time allows mechanics simulations of polycrystalline materials using three-dimensional hexahedral finite element meshes with realistic topological features.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Using Statistical Analysis Software to Advance Nitro Plasticizer Wettability

Statistical analysis in science is an extremely powerful tool that is often underutilized. Additionally, it is frequently the case that data is misinterpreted or not used to its fullest extent. Utilizing the advanced software JMP®, many aspects of experimental design and data analysis can be evaluated and improved. This overview will detail the features of JMP® and how they were used to advance a project, resulting in time and cost savings, as well as the collection of scientifically sound data. The project analyzed in this report addresses the inability of a nitro plasticizer to coat a gold coated quartz crystal sensor used in a quartz crystal microbalance. Through the use of the JMP® software, the wettability of the nitro plasticizer was increased by over 200% using an atmospheric plasma pen, ensuring good sample preparation and reliable results.

36 MATERIALS SCIENCE↗
DOE OSTI2017

Integrated Plastic Substrates for OLED Lighting

OLED lighting has immense potential as aesthetically pleasing, energy-efficient general illumination. Unlike other light sources, such as incandescents, fluorescents, and inorganic LEDs, OLEDs naturally emit over a large-area surface. They are glare free, do not need to be shaded, and are cool to the touch, requiring no heatsink. The best efficiencies and lifetimes reported are on par with or better than current forms of illumination. However, the cost for OLED lighting remains high – so much so that these products are not market competitive and there is very low consumer demand. We believe that flexible, plastic-based devices will highlight the advantages of aesthetically-pleasing OLED lighting systems while paving the way for lowering both materials and manufacturing costs. These flexible devices require new development in substrate and support technology, which was the focus of the work reported here. The project team, led by Sinovia Technologies, has developed integrated plastic substrates to serve as supports for flexible OLED lighting. The substrates created in this project would enable large-area, flexible devices and are specified to perform three functions. They include a barrier to protect the OLED from moisture and oxygen-related degradation, a smooth, highly conductive transparent electrode to enable large-area device operation, and a light scattering layer to improve emission efficiency. Through the course of this project, integrated substrates were fabricated, characterized, evaluated for manufacturing feasibility and cost, and used in white OLED demonstrations to test their impact on flexible OLED lighting. Our integrated substrates meet or exceed the DOE specifications for barrier performance in water vapor and oxygen transport rates, as well as the transparency and conductivity of the anode film. We find that these integrated substrates can be manufactured in a completely roll-to-roll, high throughput process and have developed and demonstrated manufacturing methods that can produce thousands of feet of material without defects. We have evaluated the materials and manufacturing costs of these films at scale and find that they meet the current and future cost targets for bringing down the cost of OLED lighting while enabling future roll-to-roll manufacturing of the complete device. And finally, we have demonstrated that the inherent light-scattering properties of our films enhance white OLED emission efficiency from 20% to 50% depending on the metric. This work has shown that these substrates can be created, manufactured, and will perform as needed to enable flexible OLED lighting to enter the marketplace.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2018

Adjoint-based Calibration of Plasticity Model Parameters from Digital Image Correlation Data

Parameter estimation for mechanical models of plastic deformation utilized in nuclear weapons systems is a laborious process for both experimentalists and constitutive modelers and is critical to producing meaningful numerical predictions. In this work we derive an adjoint-based optimization approach for a stabilized, large-deformation J 2 plasticity model that is considerably more computationally efficient but no less accurate than current state of the art methods. Unlike most approaches to model calibration, we drive the inversion procedure with full-field deformation data that can be experimentally measured through established digital image or volume correlation techniques. We present numerical results for two and three dimensional model problems and comment on various directions of future research.

98 NUCLEAR DISARMAMENT, SAFEGUARDS, AND PHYSICAL P↗
DOE OSTI2018

FY18 Thermal Mechanical Failure: SS-304L calibration Taylor-Quinney parameter measurement and kinematic hardening plasticity

The Thermal-Mechanical Failure project conducted in FY 2018 was divided into three sub projects: 1. Calibration of the uniaxial response of 304L stainless steel specimens at three temperatures (20, 150 and 310°C) and two strain rates (2 x 10 -4 and 8 x 10 -2 s -1 ); 2. Measurements of the fraction of plastic work that is converted to heat (Taylor-Quinney parameter) for 304L stainless steel. This fraction is usually assumed to be 0.95 in analysis because data is only available for a few materials; 3. Comparison of the predicted responses by isotropic and kinematic hardening plasticity models in a couple of simplified structural problems. One problem is a can crush followed by pressurization and is loosely associated with a crush-and-burn scenario. The other problem consists of a drop scenario of a thin-walled cylinder that carries a cantilevered internal mass.

36 MATERIALS SCIENCE↗
DOE OSTI2019

A Themodynamically Consistent Fractional Visco-Elasto-Plastic Model with Memory-Dependent Damage for Anomalous Materials

We develop a thermodynamically consistent, fractional visco-elastoplastic model coupled with damage for anomalous materials. The model utilizes Scott-Blair rheological elements for both visco- elastic/plastic parts. The constitutive equations are obtained through Helmholtz free-energy potentials for Scott-Blair elements, together with a memory-dependent fractional yield function and dissipation inequalities. A memory-dependent Lemaitre-type damage is introduced through fractional damage energy release rates. For time-fractional integration of the resulting nonlinear system of equations, we develop a first-order semi-implicit fractional return-mapping algorithm. We also develop a finite-difference discretization for the fractional damage energy release rate, which results into Hankel-type matrix-vector operations for each time-step, allowing us to reduce the computational complexity from O(N 3 ) to O(N 2 ) through the use of Fast Fourier Transforms. Our numerical results demonstrate that the fractional orders for visco-elasto-plasticity play a crucial role in damage evolution, due to the competition between the anomalous plastic slip and bulk damage energy release rates.

36 MATERIALS SCIENCE↗