Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PHYSICS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2013

Integrated Multiple Effects Software for Nuclear Physics Applications

The technical progress made during this project has been very substantial, and in most ways has exceeded the expectations of what was intended. In particular, the ability to treat CAD-based complex geometry, using the cut-cell finite-difference methodology, has been evolved to a very advanced state. Figure 1 illustrates the progress made, comparing what the modeling was capable of at the end of the Phase I project, to what it is capable of at the end of the Phase II project. This project had a strong component of collaborative research with activities at the TJNAF (JLab), including scientific assessment of specific nuclear physics hardware, and this collaboration was a main focus during the much of the Phase II project. During the final year of this project, and subsequent months since its completion, the Department of Energy has strongly shifted emphasis for SBIR projects towards commercialization. During this same time frame the software used for the modeling, Vorpal, underwent a similarly dramatic shift from a single product with any-and-all-phyiscs-in-one, to a suite of products, under the name Vsim, with each product individually targeted at one of the areas of: Electromagnetics, Microwave Devices, Plasma Devices, and Accelerator Physics. The focus area of this project, thermal analysis, was a new but important type of multi-physics application for the software involved, and the manner in which it has been implemented is of sufficient generality, that it continues life as a fifth target area, Thermal Transport. Thus, while a somewhat more subtle commercial deployment of this project’s developments was the original intention (e.g., more-physics-in-the-one), the result is in fact more in line with the newer emphasis, e.g., a direct and obvious one-to-one commercial product deployment of project capabilities.

Smithe, David↗
DOE OSTI2014

Connecting the physical and psychosocial space to Sandia's mission

Sandia Labs has corporate, lab-wide efforts to enhance the research environment as well as improve physical space. However, these two efforts are usually done in isolation. The integration of physical space design with the nurturing of what we call psychosocial space can foster more efficient and effective creativity, innovation, collaboration, and performance. This paper presents a brief literature review on how academia and industry are studying the integration of physical and psychosocial space and focuses on the efforts that we, the authors, have made to improve the research environment in the Cyber Engineering Research Lab (CERL), home to Group 1460. Interviews with subject matter experts from Silicon Valley and the University of New Mexico plus changes to actual spaces in CERL provided us with six lessons learned when integrating physical and psychosocial space. We describe these six key takeaways in hopes that Sandia will see this area as an evolving research capability that Sandia can both contribute to and benefit from.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2016

Development of Magnesium Diboride Superconducting Coils for Nuclear Physics Application

The primary objective of this project is to develop an affordable magnet technology at 10-25K and then take it to a level that it can be considered mature enough to be used in a real Nuclear Physics accelerator system. We believe that because of the lower cost of magnesium diboride (MgB2) as compared to the other HTS, it offers the best such chance. Once successfully demonstrated, this exciting and innovative technology could potentially revolutionize the field the same way the conventional superconducting NbTi magnets did several decades ago. MgB2 magnets could reduce the cost of ownership (capital +operation) while enhancing performance. Another innovation is the overall cooling scheme where the exhaust gas of an existing superconducting magnet cools the inner tube which conduction cools the MgB2 coils. In several instances during the upgrade of existing facilities or designing new facilities in the Nuclear Physics or High Energy Physics communities, it is found that magnets made neither with copper coils nor with conventional superconducting NbTi coils offer an acceptable solution. Whereas copper coils limit the performance of the machine and consume large amount of power, NbTi require 4 K cryogenic facilities. This is particularly applicable in those Nuclear Physics machines where the magnetic field requirements are rather modest. One such case has been found in the Relativistic Heavy Ion Collider (RHIC) at Brookhaven National Laboratory (BNL) where an e-lens system is under construction to increase RHIC luminosity. In this case, magnesium diboride (MgB2) operating at 10-25 K seems to offer an exciting and practical solution. The main objective in Phase II is to demonstrate the reliability and robustness of the MgB2 coil technology, so that it is ready for use in RHIC and other user facilities. We will do this by fabricating several MgB2 coils and by conducting an exhaustive series of lifetime cycle tests. The tests will involve about a thousand ramp-up and ramp-down cycles, about 20 over current or thermal-excursions hitting the quench limit and about 10 thermal cycles. Phase II will begin with a design modeling effort of the MgB2 coils for the e-lens system with enough detail so that the magnetic, thermal and stress requirements can be understood for the fabrication and testing of representative MgB2 coils. After the technology is proven in Phase II for reliability, we will propose to use this in Phase III to upgrade RHIC e-lens system for improved luminosity performance and expect that more applications will follow in other accelerator and medical facilities.

99 GENERAL AND MISCELLANEOUS↗
DOE OSTI2017

Development of Multi-physics (Multiphase CFD + MCNP) simulation for generic solution vessel power calculation

The current study aims to predict the steady state power of a generic solution vessel and to develop a corresponding heat transfer coefficient correlation for a Moly99 production facility by conducting a fully coupled multi-physics simulation. A prediction of steady state power for the current application is inherently interconnected between thermal hydraulic characteristics (i.e. Multiphase computational fluid dynamics solved by ANSYS-Fluent 17.2) and the corresponding neutronic behavior (i.e. particle transport solved by MCNP6.2) in the solution vessel. Thus, the development of a coupling methodology is vital to understand the system behavior at a variety of system design and postulated operating scenarios. In this study, we report on the k-effective (keff) calculation for the baseline solution vessel configuration with a selected solution concentration using MCNP K-code modeling. The associated correlation of thermal properties (e.g. density, viscosity, thermal conductivity, specific heat) at the selected solution concentration are developed based on existing experimental measurements in the open literature. The numerical coupling methodology between multiphase CFD and MCNP is successfully demonstrated, and the detailed coupling procedure is documented. In addition, improved coupling methods capturing realistic physics in the solution vessel thermal-neutronic dynamics are proposed and tested further (i.e. dynamic height adjustment, mull-cell approach). As a key outcome of the current study, a multi-physics coupling methodology between MCFD and MCNP is demonstrated and tested for four different operating conditions. Those different operating conditions are determined based on the neutron source strength at a fixed geometry condition. The steady state powers for the generic solution vessel at various operating conditions are reported, and a generalized correlation of the heat transfer coefficient for the current application is discussed. The assessment of multi-physics methodology and preliminary results from various coupled calculations (power prediction and heat transfer coefficient) can be further utilized for the system code validation and generic solution vessel design improvement.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2018

Proceedings of the 1998 International Computational Accelerator Physics Conference

The 1998 International Computational Accelerator Physics Conference, ICAP’98, was held September 14-18, 1998, at the Monterey Convention Center in Monterey, California. The meeting continued the tradition of four earlier Computational Accelerator Physics conferences, held in La Jolla, California (1988), Los Alamos, New Mexico (1990), Pleasanton, California (1993), and Williamsburg, Virginia (1996). ICAP’98 was organized by the Stanford Linear Accelerator Center (SLAC), Los Alamos National Laboratory (LANL), and the National Energy Research Scientific Computing Center (NERSC), and received support from the U.S. Department of Energy. The aim of this conference series is to discuss recent advances in Computational Accelerator Physics and their applications to solving important problems related to present and future accelerators. The ICAP’98 program included plenary sessions on modeling challenges in next-generation accelerators, state-of-the art methods in computational accelerator physics, and a view of what high-end computing would be like in the 21st century. There were also focused sessions on accelerator design and control, modeling high intensity beam phenomena, electromagnetic modeling, advanced algorithms, software environments and libraries, visualization and graphic interfaces, modeling advanced accelerator concepts, modeling the beam-beam interaction, computing wakefields, and combined particle/field simulations. In addition to these oral sessions there was a poster session and a vendor display. Prior to the start of the technical program, a half-day tutorial on High Performance Computing was hosted by NERSC. The ICAP series recognizes that computing and, in particular, advanced computing, is playing an increasingly important role in the successful design and development of major accelerator facilities, and in research and development leading to advances in accelerator technology. We expect that this new emphasis on high-end computing will continue in future ICAP conferences.

Ko, Kwok↗
DOE OSTI2018

MULTI-PRED: A Software Module for Predictive Modeling of Coupled Multi-Physics Systems: User's Manual

This User’s Manual describes the code module MULTI-PRED, written in FORTRAN which implements the methodology for “predictive modeling of coupled multi-physics systems (PM-CMPS)” formulated by Cacuci (2014). This methodology fully takes into account the coupling terms between the systems but requires only the computational resources that would be needed to perform predictive modeling on each system separately. The PM-CMPS methodology uses the maximum entropy principle to construct an optimal approximation of the unknown a priori distribution based on a priori known mean values and uncertainties characterizing the experimental and computational parameters and results of interest responses, called for the multi-physics models under consideration. This “maximum entropy” a priori distribution is combined, using Bayes’ theorem, with the “likelihood” provided by the multi-physics simulation models to obtain a formal posterior distribution. Subsequently, the posterior distribution thus obtained is evaluated using the saddle-point method to obtain analytical expressions for the optimally predicted values for the multi-physics models parameters and responses along with corresponding reduced uncertainties. Noteworthy, the predictive modeling methodology for the coupled systems is constructed such that the systems can be considered sequentially rather than simultaneously, while preserving exactly the same results as if the systems were treated simultaneously. Consequently, very large coupled systems, which could perhaps exceed available computational resources if treated simultaneously, can be treated with the PM-CMPS methodology presented in this work sequentially and without any loss of generality or information, requiring just the resources that would be needed if the systems were treated sequentially. Three illustrative demonstration problems are also provided. The first problem presents the application of the PM-CMPS methodology to a simple particle diffusion problem which admits a closed-form analytical solution which facilitates a rapid understanding of this methodology and its predicted results. The second demonstration problem presents the application of the PM-CMPS methodology to the problem of inverse prediction, from detector responses in the presence of counting uncertainties, of the thickness of a homogeneous slab of material containing uniformly distributed gamma-emitting sources, for optically thin and thick slabs. This problem highlights the essential role played by the relative uncertainties (or, conversely, accuracies) of measured and computed responses. The third demonstration problem presents the application of the PM-CMPS methodology to the F-area cooling towers at the Savannah River National Lab. This problem demonstrates that the PM-CMPS methodology reduces the predicted response uncertainties not only at locations where measurements are available, but also at locations where measurements are not available.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2019

Physics-Informed Machine Learning with Application to Solid Oxide Fuel Cell System Modeling and Optimization

Traditional data-driven machine learning (ML) techniques were combined with the physics-based SOFC-MP model toward improving SOFC system-level performance prediction. Four different physics-informed ML methods were proposed to demonstrate better prediction accuracy compared with traditional ML methods. First, it was preferred that the existing Kriging-based surrogate model not be entirely abandoned, so errors between Kriging regression prediction and true solution are learned using ML. The goal was to find the pattern of the error distribution as a function of model input so discrepancies between the Kriging prediction and true solution could be reduced by adding the additional ML-trained error term to the existing prediction. Second, deep neural networks (DNN) coupled with the mass balance model (MBM) have been developed to significantly decrease the reduced order model (ROM) prediction error with fewer training data compared to the traditional Kriging-based ROM and traditional DNN regression approaches. Third, DNN regression coupled with a neural networks (NN) classifier and MBM was developed. It provides superior performance on classifying the physically operational conditions for natural gas fuel cell (NGFC) than traditional classification approaches. Finally, two kinds of DNN transferring were studied and tested. One was transferring DNN for low-fidelity model data to a high-fidelity model. The second one was transferring DNN from state-of-the-art NGFC to advanced NGFC. These physic-informed ML frameworks can serve as a solid foundation for estimating U.S. Department of Energy-targeted fuel cell performance and exhibit great potential to be employed to other engineering applications.

30 DIRECT ENERGY CONVERSION↗
DOE OSTI2017

Accelerator Physics at NSLS-II Research Accomplishments in 2016-2017

The main duty of the Accelerator Physics group at NSLS-II is to support user operations. At the same time, the accelerator physicists carry out a number of studies of topical accelerator physics problems. These studies cover a wide range of accelerator physics including advanced techniques of magnet lattice correction and optimization, nonlinear beam dynamics, collective effects and impedances, low-emittance upgrade options for NSLS-II, and new approaches to lattice design for circular accelerators. A review of recent accomplishments of the NSLS-II Accelerator Physics group is presented in this report.

36 MATERIALS SCIENCE↗
DOE OSTI2021

High-Accuracy Module Emulators from Physically-Constrained AI Algorithms

Focal Area(s): How do we use AI tools to integrate observations, simulated data and physical and chemical fundamentals (Focal Area 3) into model components (Focal Area 2) that have high accuracy and stability and low computational burden to improve Earth System Predictability? Science Challenge: Earth system modeling of the hydrological cycle involves compute-intensive modules representing complex chemical and physical process. Recently, AI tools that are far less compute intensive have been developed that emulate these modules, but many of these efforts are not yet sufficiently accurate or even stable. We know a lot about the physics and chemistry of earth system processes. The Science Challenge is developing AI tools that not only incorporate observations and simulated data, but also incorporate the physics and chemistry of the process, while still maintaining the compute efficiency.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Integrating AI with physics-based hydrological models and observations for insightinto changing climate and anthropogenic impacts

Focal Areas: Advanced computational methods that integrate AI, physics, and observations to provide predictive landscape hydrological modeling over large areas (regional, continental, worldwide) while incorporating increasingly available high-resolution data from drones, lidar and satellite. Science Challenge: Landscape data is available at finer scales than can be used in physics-based hydrological (PBH) models for regional or continental terrestrial water modeling. Thus, we throw away observable detail to achieve computability. We argue that integration of AI with PBH models and observed data can be used to provide upscaling for predictive models that are computable, retain physical conservation properties, and represent the fine-scale features that affect complex flow physics through both natural and urban environments. Developing such next-generation capabilities requires outside-the-box thinking that melds the different approaches of AI modeling, PBH modeling, and observation across multiple scales from local drones to satellites.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Learned implicit representations of aerosol chemistry and physics for enhancing the predictability of water cycle extreme events

Focal Area(s): Focal area 2: Predictive modeling through the use of AI-derived model components; and Focal area 3: physics-guided AI. Science Challenge: Comprehensive models of many geophysical processes require a large number of state variables, disqualifying them for inclusion in Earth System Models (ESMs) for the foreseeable future. This white paper proposes the paradigm shift from the use of state variables representing explicit physical quantities to the use of machine-learning to create and integrate a compact, implicit representation of a physical system with a smaller number of state variables. As an initial application, we propose to create parsimonious machine-learned surrogate models of gas- and aerosol-phase chemistry and physics with the purpose of improving the accuracy of the representation of cloud formation and cloud-aerosol interaction in the E3SM model. This type of improved representation of cloud microphysics is critical for enhancing the predictability of water cycle extremes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Development of a Multi-physics Model to Optimize Continuous Liquid Interface Production (CLIP) for Additive Manufacturing (Carbon3D HPC4Mfg Final Report)

Continuous Liquid Interface Production (CLIP) is poised to bring additive manufacturing to multiple American manufacturing sectors owing to its unique combination of rapid print speeds and material options that resemble injection molding thermoplastics. In spite of these benefits, CLIP is still a maturing process. To improve our understanding and control of the process, this project developed a multi-physics computational model that encompasses the coupled chemical-physical processes of photopolymerization and fluid flow to predict part outcomes. A physically predictive model can enable rapid optimization of CLIP and reduce the current cycle time and waste associated with optimization by four-fold. Ultimately, this effort will help open the U.S. $400B plastic manufacturing industry to the key benefits of additive manufacturing, namely mass customization, unlimited design space, and a cost- and energy-effective path to mainstream manufacturing. In the course of the project we produced a model which coupled fluid-flow, species transport, and photochemistry to model the Carbon CLIP process. As the development proceeded, we validated the code against theory and experiments. The resulting code was transferred to Carbon, and we expect it to be a useful part of their modeling capability. Future work includes improvements to the fluid solver’s robustness and performance, along with the addition of additional physics models.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Physical and Flow Properties of Glass Forming Chemicals (V2O5, SnO, SnO2, Cr2O3, FeCr2O4, and ZrSiO4) and Mixtures

For a sustainable nuclear waste vitrification process at the Hanford Tank Waste Treatment and Immobilization Plant (WTP), proper selection and consistent supply of glass-forming chemicals (GFCs) are crucial. Establishing rigorous acceptance criteria for the characterization of GFCs will be required to operate the vitrification facility and to mitigate any processing issues or failures. Low-activity wastes (LAW) are blended with GFCs to form slurry melter feeds and vitrified in a melter. To enhance properties of waste glasses, new chemicals are being introduced to the current GFC mixture (Vienna et al. 2016; Muller et al. 2017, 2019). In this study, three new GFCs were evaluated for enhanced LAW glass formulations: chromium oxide (Cr 2 O 3 ), vanadium oxide (V 2 O 5 ), and stannic oxide (SnO 2 ). These three oxide components are included in enhanced waste glass (EWG) formulations and GFCs with the appropriate physical and flow properties are needed. As a starting point, single metal oxide GFCs: Cr 2 O 3 , V 2 O 5 , and SnO 2 were sourced and tested. To characterize these new individual GFCs and mixtures of GFCs, the industrial bulk characterization consultant, Jenike and Johanson, was employed to measure physical and flow properties of individual GFCs and their mixtures. Pacific Northwest National Laboratory (PNNL) also measured several selected physical properties for data evaluation as a quality assurance step. In addition, PNNL measured physical and rheological properties of slurry melter feeds containing those GFCs. Subsequent data analyses and verification were conducted. The purpose of this report is to assess the applicability of these GFCs for LAW vitrification based on their properties. This report will help understand measured data and evaluate new GFCs for use. Moreover, this report may give useful insights to help troubleshoot any GFC and melter feed transport and mixing issues that arise during processing, leading to a successful cleanup mission at WTP.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗
DOE OSTI2022

A Muon Collider Facility for Physics Discovery

Muon colliders provide a unique route to deliver high energy collisions that enable discovery searches and precision measurements to extend our understanding of the fundamental laws of physics. The muon collider design aims to deliver physics reach at the highest energies with costs, power consumption and on a time scale that may prove favorable relative to other proposed facilities. In this context, a new international collaboration has formed to further extend the design concepts and performance studies of such a machine. This effort is focused on delivering the elements of a $\sim$10 TeV center of mass (CM) energy design to explore the physics energy frontier. The path to such a machine may pass through lower energy options. Currently a 3 TeV CM stage is considered. Other energy stages could also be explored, e.g. an s-channel Higgs Factory operating at 125 GeV CM. We describe the status of the R&D and design effort towards such a machine and lay out a plan to bring these concepts to maturity as a tool for the high energy physics community.

43 PARTICLE ACCELERATORS↗
DOE OSTI2022

Neutron Source Facility of the National Science Center “Kharkiv Institute of Physics and Technology” at Kharkiv, Ukraine

Argonne National Laboratory developed, designed, and supported the construction of a state-of-the-art Neutron Source Facility (NSF) at the Kharkov Institute of Physics and Technology (KIPT) in Kharkov Ukraine, under the U.S. DOE NNSA Russian Research Reactor Fuel Return (RRRFR) program. Ukraine approved the return of all highly enriched uranium in the country to Russia prior to the 2012 Nuclear Security Summit in return for the RRRFR program to fund the development, the design, and the construction of the NSF. The facility is designed to produce medical isotopes, train nuclear professionals, support the Ukrainian nuclear industry, and provide experimental capabilities for performing reactor physics, materials, and basic science research. The NSF was successfully started and operated in August 2021. The NSF is the first facility of this type in the world, and it will be used to understand the physics of driven systems for energy production and the disposal of spent nuclear fuels. The NSF consists of a subcritical assembly using low enriched uranium (LEU) fuel driven with an electron accelerator. The NSF target design utilizes tungsten or natural uranium for producing neutrons through photonuclear reactions using 100-MeV electrons. The accelerator power is 100 KW, which produces 3x10 14 neutrons per second from the uranium target. The subcritical assembly is designed to obtain the highest possible neutron flux intensity with an effective neutron multiplication factor of less than 0.98. Passive safety, reliability, and environmental considerations were included in the NSF design. The NSF utilization study shows that this neutron source has the capability of producing different medical isotopes. Several horizontal neutron channels are incorporated for performing applied and basic research. The NSF is configured to accommodate future design upgrades and new missions. The facility design was approved by the Ukraine Academy of Sciences before starting the NSF construction. The construction, the equipment installation, and the operation of the different systems of the NSF were completed and approved by the Ukrainian regulators. In July 2020, the State Nuclear Regulatory Inspectorate of Ukraine (SNRIU) issued a license for the physical startup of the NSF. The construction of facility was completed in early 2021.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗
DOE OSTI2022

Assessment of Core Physics Characteristics of Extended Enrichment and Higher Burnup LWR Fuels using the Polaris/PARCS Two-Step Approach. Vol. I: PWR Fuel

Nuclear fuel with extended enrichment (235U enrichment within 5-8 wt%) is one of the evolutionary changes that have been pursued in recent years by commercial light water reactor operators and fuel vendors to improve the fuel cycle economy and operation performance of a nuclear plant. This work assesses the performance of the Polaris/PARCS two-step approach in core physics modeling of the pressurized water reactor cores with extended enrichment fuel, referred to as “LEU+” in this report. A representative LEU+ core with a 24-month fuel cycle developed by Southern Nuclear Company (SNC) was modeled using this two-step approach. A representative LEU core with an 18-month fuel cycle was also modeled to provide a reference for the LEU+ core. As expected, significantly more burnable poison absorbers were used in the LEU+ core to accomodate its higher fuel enrichment. Nine different fuel assembly types were modeled using Polaris for each core to generate the assembly cross sections, which were then processed by GenPMAX to prepare the cross-section data for PARCS. The average specific powers of each fuel batch in each core were derived from VERA results and higher specific powers in fresh assemblies were found in the LEU core due to its less total uranium loading included in the VERA LEU model, given that the total core power was assumed to be the same for both cores. PARCS models were developed to simulate the steady-state operations of both cores. PARCS results on the LEU+ core were first compared with the VERA results for verification purpose; good agreements were seen in soluble boron and burnup distribution results, indicating that the Polaris/PARCS modeling and simulation were correctly implemented. Core physics parameters calculated by PARCS, at zero power physics tests, beginning of cycle (BOC), and end of cycle conditions (EOC), were compared between the LEU+ core and the LEU core, including soluble boron concentration, burnup distributions, assembly and pin power peaking factors, fuel temperature reactivity coefficients, moderator temperature and density reactivity coefficients, control rod worth, and shut down margin. The main differences in PARCS results between the LEU+ and the LEU cores are summarized below: 1)The critical boron concentrations were found to be much higher in the LEU+ core than in the LEU core (1582 vs. 1335 ppm for peak values). 2)Higher assembly radial power peaking factors (1.4 vs. 1.3 for peak values), 2D pin peaking factors (1.53 vs. 1.42 for peak values), and 3D pin peaking factors (1.89 vs. 1.81 for peak values) were found in the LEU+ core than in the LEU core. 3)Significantly higher reactivity coefficients of moderator temperature (and density) were found in LEU+ than in LEU.4)Significantly lower control rod worth at EOC were found in LEU+ than LEU for all but one control banks.5)Significantly lower shut down margins were found in the LEU+ core than in the LEU core. The Polaris/GenPMAX/PARCS code suite was found to be capable of modeling the LEU+ PWR core for steady-state operations and no unexpected results in core physics parameters were observed, in spite of that a) several bugs in PARCS were identified and workarounds were used; b) several features were found lacking in the current version of PARCS that would be useful for core modeling. A list of requests for bug fixes and feature upgrades for PARCS originated from this work were transmitted to the code developers. The assessments on the performance of the Polaris/PARCS two-step approach in core modeling for boiling water reactor with LEU+ fuel is ongoing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Present and future of JLab CLAS12 physics program

The CLAS12 detector at Jefferson Lab produced the first results in SIDIS and DI-HADRON reactions. Making use of the CEBAF high energy (up to 11 GeV) and highly longitudinal polartized (up to 90%) electron beam will cover unexplored territories in electron-scattering physics. Exclusive reactions on nuclons and nuclei will be measured with high precision in high luminosity (up to 10e35 cm-2s-1) experiments. Mapping out a new class of structure functions, GPDs and TMDs, detecting and reconstructing exotic meson and baryon states and accessing nucleons correlations in nuclei, in the next decade, the CLAS12 rich physics program will provide insight in the complex dynamics of the QCD paving the road to the EIC physics. In this talk, the CLAS12 detector and JLab Hall-B physics program will be described reporting some preliminary results for flag-ship reactions and plans for future upgrades of the detector.

Battaglieri, Marco↗
DOE OSTI2023

High Q SRF cavity-based searches for beyond the standard model physics

The SRF technology developed for accelerators can be successfully applied to new applications, including quantum computing, dark matter searches and beyond the standard model physics. The ultra-high quality factor of SRF cavities can enable unprecedented sensitivity in fields outside of the usual accelerator applications, for examples fundamental and beyond the standard model physics. Applications of SRF cavities for gravitational waves searches are also being investigated. The SQMS Physics and Sensing thrust is working on this effort as it strives to combine SRF cavities with QIS, with a focus on BSM and fundamental physics.

Berlin, A.↗