Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PASSENGER”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1990

High-Speed Civil Transport research and technology needs

Market projections made by studies conducted under NASA contract have indicated a need for fleets of High Speed Civil Transports (HSCTs) by the years 2000-2005, in which each HSCT would carry 250-300 passengers over ranges of 5000-6500 nmi. The most promising HSCT concepts cruise at Mach 2.0-2.5. Both technology-readiness and environmental impact problems are addressed, giving attention to high lift wing leading-edge devices, NO(x) emission reductions via combustor design innovations, and configuration optimization for low sonic boom generation.

Vachal, John D.↗
NASA NTRS1991

A comparison of arrow, trapezoidal and M wing concepts using a Mach 2 supersonic cruise transport mission

The present analytic study of the potential performance of SST configurations radically differing from arrow-winged designs in lifting surface planform geometry gives attention to trapezoidal-wing and M-wing configurations; the trapezoidal wing is used as the baseline in the performance comparisons. The design mission was all-supersonic (Mach 2), carrying 248 passengers over a 5500 nautical-mile range. Design constraints encompassed approach speed, TO&L field length, and engine-out second-segment climb and missed-approach performance. Techniques for improving these configurations are discussed.

Martin, Glenn L.↗
NASA NTRS1991

A revolutionary approach to general aviation airplane design

The accumulation of such advanced technologies as digital guidance/display concepts, flow laminarization techniques, smart structures, and composite primary structures, is presently considered systematically with a view to such novel features' integration in a next-generation general aviation aircraft. This Advanced Personal Transport is conceived as a six-passenger aircraft with 1200 nautical mile range; a tractor and a pusher configuration were considered, with the pusher configuration being of twin-boom empennage, three-lifting-surface type. Attention is given to pilot-workload reductions achievable through the proposed Integrated GPS/Glonass system.

Roskam, Jan↗
NASA NTRS1992

Oblique-Flying-Wing Supersonic Transport Airplane

Oblique-flying-wing supersonic airplane proposed as possible alternative to B747B (or equivalent). Tranports passengers and cargo as fast as twice speed of sound at same cost as current subsonic transports. Flies at same holding speeds as present supersonic transports but requires only half takeoff distance.

Van Der Velden, Alexander J. M.↗
NASA NTRS1992

Net Catches Debris From Explosion

Device restrains fragments and absorbs their kinetic energy. Net of stitched webbing folds compactly over honeycomb plug. Attaches to frame mounted on wall around rectangular area to be cut out by explosion. Honeycomb panel absorbs debris from explosion and crumples into net. Dissipates energy by ripping about 9 in. of stitched net. Developed for emergency escape system in Space Shuttle, adaptable to restraint belts for vehicles; subjecting passengers to more gradual deceleration and less shock.

Kahn, Jon B.↗
NASA NTRS1991

The HL-20 as the personnel launch system

To ensure manned access to space, the Personnel Launch System (PLS) is under consideration by NASA as a complement to the Space Shuttle. Its primary mission will be to transport crew and passengers to and from the Space Station Freedom in low earth orbit (LEO). There are currently two design studies being funded: a biconic, ballistic-shaped vehicle at JSC and a lifting body concept at LaRC. In the late 1950's, both NASA and the Air Force were engaged in the study of lifting bodies for LEO vehicles. Projects included the M2F2 series, the X24 series, and the HL-10. These lifting bodies derive their lift solely from the shape of the fuselage. By the mid-1960's, full scale models were actually built and tested with some success and some failure. Langley's HL-10 was one of the most successful of these projects. However, these studies were temporarily shelved while work progressed on the Space Shuttle. Some of the test results from these studies actually led to concept refinements on certain aspects of the Space Shuttle development. Due to the more recent successes of the Space Shuttle Program and a directive to place a Space Station in orbit, there has been renewed interest in developing a lifting body vehicle as the PLS. The vehicle, the HL-20, is an LaRC Project in the Space Systems Division, involving the efforts of a number of individuals. Data on the research carried out for peer and lay review has been available in hard copy format, but a need existed for actual video footage, combined with scientific visualization technology, for presentation and archival purposes. The purpose of this project was to satisfy this need.

Beam, Sherilee F.↗
NASA NTRS1992

Designing a Methodology for Future Air Travel Scenarios

The growing demand on air travel throughout the world has prompted several proposals for the development of commercial aircraft capable of transporting a large number of passengers at supersonic speeds. Emissions from a projected fleet of such aircraft, referred to as high-speed civil transports (HSCT's), are being studied because of their possible effects on the chemistry and physics of the global atmosphere, in particular, on stratospheric ozone. At the same time, there is growing concern about the effects on ozone from the emissions of current (primarily subsonic) aircraft emissions. Evaluating the potential atmospheric impact of aircraft emissions from HSCT's requires a scientifically sound understanding of where the aircraft fly and under what conditions the aircraft effluents are injected into the atmosphere. A preliminary set of emissions scenarios are presented. These scenarios will be used to understand the sensitivity of environment effects to a range of fleet operations, flight conditions, and aircraft specifications. The baseline specifications for the scenarios are provided: the criteria to be used for developing the scenarios are defined, the required data base for initiating the development of the scenarios is established, and the state of the art for those scenarios that have already been developed is discussed. An important aspect of the assessment will be the evaluation of realistic projections of emissions as a function of both geographical distribution and altitude from an economically viable commercial HSCT fleet. With an assumed introduction date of around the year 2005, it is anticipated that there will be no HSCT aircraft in the global fleet at that time. However, projections show that, by 2015, the HSCT fleet could reach significant size. We assume these projections of HSCT and subsonic fleets for about 2015 can the be used as input to global atmospheric chemistry models to evaluate the impact of the HSCT fleets, relative to an all-subsonic future fleet. The methodology, procedures, and recommendations for the development of future HSCT and the subsonic fleet scenarios used for this evaluation are discussed.

Wuebbles, Donald J.↗
NASA NTRS1991

Final design proposal: Beta Systems-El Toro. A proposal in response to a commercial air transportation study

El Toro is a remotely piloted airplane designed to operate as a commercial aircraft in a fictional 'Aeroworld' where the passengers are ping-pong balls and the distances between cities are on the order of thousands of feet. The present design for El Toro will profitably meet the requirements for operation in Aeroworld with a ticket price comparable the ticket prices of current transportation. The extended range of El Toro allows for numerous flights to be flown before the battery pack needs to be changed. This drastically reduces the operating costs to the airlines, allowing them to charge less for a ticket or else to realize a higher profit margin.

Muenzberg, Steve↗
NASA NTRS1992

Effects of turbine cooling assumptions on performance and sizing of high-speed civil transport

The analytical study presented examines the effects of varying turbine cooling assumptions on the performance of a high speed civil transport propulsion system as well as the sizing sensitivity of this aircraft to these performance variations. The propulsion concept employed in this study was a two spool, variable cycle engine with a sea level thrust of 55,000 lbf. The aircraft used for this study was a 250 passenger vehicle with a cruise Mach number of 2.4 and 5000 nautical mile range. The differences in turbine cooling assumptions were represented by varying the amount of high pressure compressor bleed air used to cool the turbines. It was found that as this cooling amount increased, engine size and weight increased, but specific fuel consumption (SFC) decreased at takeoff and climb only. Because most time is spent at cruise, the SFC advantage of the higher bleed engines seen during subsonic flight was minimized and the lower bleed, lighter engines led to the lowest takeoff gross weight vehicles. Finally, the change in aircraft takeoff gross weight versus turbine cooling level is presented.

Senick, Paul F.↗
NASA NTRS1992

An experimental investigation of high-aspect-ratio cooling passages

An experimental investigation was conducted to evaluate the effectiveness of using high-aspect-ratio cooling passenges to improve the life and reduce the colant pressure drop in high-pressure rocket thrust chambers. A plug-nozzle rocket-engine test apparatus was used to test two cylindrical chambers with low-aspect-ratio cooling passages and one with high-aspect-ratio cooling passages. The chambers were cyclically tested and data were taken over a wide range of coolant mass flows. The results showed that for the same coolant pressure drop, the hot-gas-side wall temperature of the high-aspect-ratio chamber was 30 percent lower than the baseline low-aspect-ratio chamber, resulting in no fatigue damage to the wall. The coolant pressure drop for the high-aspect-ratio chamber was reduced in increments to one-half that of the baseline chamber, by reducing the coolant mass flow, and still resulted in a reduction in the hot-gas-side wall temperature when compared to the low-aspect-ratio chambers.

Carlile, Julie A.↗
NASA NTRS1992

Battery cars on superconducting magnetically levitated carriers: One commuting solution

Commuting to work in an urban-suburban metropolitan environment is becoming an unpleasant time-wasting process. We applied the technology of communication management to this commuting problem. Communication management is a system-engineering tool that produced today's efficient telephone network. The resulting best commuting option is magnetically levitated carriers of two-passenger, battery-powered, personally-owned local-travel cars. A commuter drives a car to a nearby station, selects a destination, drives on a waiting carrier, and enters an accelerating ramp. A central computer selects an optimum 100 miles-per-hour trunk route, considering existing and forecast traffic; assigns the commuter a travel slot, and subsequently orders switching-station actions. The commuter uses the expensive facilities for only a few minutes during each trip. The cost of travel could be less than 6 cents per mile.

Briggs, B. Mike↗
NASA NTRS1992

Knolle Magnetrans: A magnetically levitated train system

The Knolle Magnetrans is a continuous transportation system featuring small cars traveling in rapid succession, levitated by permanent magnets in repulsion, and propelled by stationary linear induction motors. The vehicles' headway, speed, acceleration, and deceleration are designed into the system and mechanically enforced. Passengers board dynamically and controls consist of a simple on-off relay. This paper summarizes the system design goals, describes the system components and discusses related environmental issues.

Knolle, Ernst G.↗
NASA NTRS1992

Apparatus for Elevated Temperature Compression or Tension Testing of Specimens

In order to support materials selection for the next generation supersonic civilian passenger transport aircraft, a testing apparatus was developed to evaluate certain materials under conditions of high load and elevated temperature. In order to elevate the temperature of the material during standard tension and compression testing the test specimen is surrounded by a pair of supports which include internal heating means. These supports also prevent buckling of the specimen during compression testing.

Gates, Thomas S.↗
NASA NTRS1991

Transport Canada aging aircraft activities

A description is given of recent initiatives undertaken in Canada to address the problems of aging passenger airplanes. In addition to participation in and support of U.S. aging aircraft programs, independent activities were undertaken in such areas as regulatory control of nondestructive testing, aging fleet evaluations, and measures to address the airworthiness of aging Canadian-manufactured airplanes.

Civil aviation↗
NASA NTRS1992

High speed research system study. Advanced flight deck configuration effects

In mid-1991 NASA contracted with industry to study the high-speed civil transport (HSCT) flight deck challenges and assess the benefits, prior to initiating their High Speed Research Program (HSRP) Phase 2 efforts, then scheduled for FY-93. The results of this nine-month effort are presented, and a number of the most significant findings for the specified advanced concepts are highlighted: (1) a no nose-droop configuration; (2) a far forward cockpit location; and (3) advanced crew monitoring and control of complex systems. The results indicate that the no nose-droop configuration is critically dependent upon the design and development of a safe, reliable, and certifiable Synthetic Vision System (SVS). The droop-nose configuration would cause significant weight, performance, and cost penalties. The far forward cockpit location, with the conventional side-by-side seating provides little economic advantage; however, a configuration with a tandem seating arrangement provides a substantial increase in either additional payload (i.e., passengers) or potential downsizing of the vehicle with resulting increases in performance efficiencies and associated reductions in emissions. Without a droop nose, forward external visibility is negated and takeoff/landing guidance and control must rely on the use of the SVS. The technologies enabling such capabilities, which de facto provides for Category 3 all-weather operations on every flight independent of weather, represent a dramatic benefits multiplier in a 2005 global ATM network: both in terms of enhanced economic viability and environmental acceptability.

Swink, Jay R.↗
NASA NTRS1992

Vibro-Acoustic FE Analyses of the Saab 2000 Aircraft

A finite element model of the Saab 2000 fuselage structure and interior cavity has been created in order to compute the noise level in the passenger cabin due to propeller noise. Areas covered in viewgraph format include the following: coupled acoustic/structural noise; data base creation; frequency response analysis; model validation; and planned analyses.

Green, Inge S.↗
NASA NTRS1992

Experimental characterization of nonlinear, rate-dependent behavior in advanced polymer matrix composites

In order to support materials selection for the next-generation supersonic civilian-passenger transport aircraft, a study has been undertaken to evaluate the material stress/strain relationships needed to describe advanced polymer matrix composites under conditions of high load and elevated temperature. As part of this effort, this paper describes the materials testing which was performed to investigate the viscoplastic behavior of graphite/thermoplastic and graphite/bismaleimide composites. Test procedures, results and data-reduction schemes which were developed for generating material constants for tension and compression loading, over a range of useful temperatures, are explained.

Gates, Thomas S.↗