Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Optical Properties of Multilayered Sol–Gel Zinc-Oxide Films

Study of structural, optical and photocatalytic properties of multilayered (1–8 layers) zinc oxide films deposited on glass substrates by sol-gel method showed, that after thermal treatment at 500°C they consist of random oriented hexagonal crystalline grains with size of 34–40 nm, forming larger particles with sizes of 100–150 nm, which do not depend on number of layers. With an increase in the number of layers, the intensity of exciton photoluminescence decreases by a factor of 10, the absorption of light in the visible and near IR ranges increases, and the efficiency of photocatalytic decomposition of the test organic dye rhodamine B increases by 10–12%. The observed changes are related to the increase in the total area of grain boundaries and to the change in the integral amount of oxygen vacancies and interstitial atoms as the number of layers increases, which makes it possible to control the properties of zinc oxide films for applications in optoelectronics, photovoltaics and photocatalysis.

36 MATERIALS SCIENCE↗

The Measurement of Aerosol Optical Properties using Continuous Wave Cavity Ring-Down Techniques

Large uncertainties in the effects that aerosols have on climate require improved in situ measurements of extinction coefficient and single-scattering albedo. This paper describes the use of continuous wave cavity ring-down (CW-CRD) technology to address this problem. The innovations in this instrument are the use of CW-CRD to measure aerosol extinction coefficient, the simultaneous measurement of scattering coefficient, and small size suitable for a wide range of aircraft applications. Our prototype instrument measures extinction and scattering coefficient at 690 nm and extinction coefficient at 1550 nm. The instrument itself is small (60 x 48 x 15 cm) and relatively insensitive to vibrations. The prototype instrument has been tested in our lab and used in the field. While improvements in performance are needed, the prototype has been shown to make accurate and sensitive measurements of extinction and scattering coefficients. Combining these two parameters, one can obtain the single-scattering albedo and absorption coefficient, both important aerosol properties. The use of two wavelengths also allows us to obtain a quantitative idea of the size of the aerosol through the Angstrom exponent. Minimum sensitivity of the prototype instrument is 1.5 x 10(exp -6)/m (1.5 M/m). Validation of the measurement of extinction coefficient has been accomplished by comparing the measurement of calibration spheres with Mie calculations. This instrument and its successors have potential to help reduce uncertainty currently associated with aerosol optical properties and their spatial and temporal variation. Possible applications include studies of visibility, climate forcing by aerosol, and the validation of aerosol retrieval schemes from satellite data.

Strawa, Anthony W.↗

The Measurement of Aerosol Optical Properties Using Continuous Wave Cavity Ring-Down Techniques

Large uncertainties in the effects that aerosols have on climate require improved in-situ measurements of extinction coefficient and single-scattering albedo. This abstract describes the use of continuous wave cavity ring-down (CW-CRD) technology to address this problem. The innovations in this instrument are the use of CW-CRD to measure aerosol extinction coefficient, the simultaneous measurement of scattering coefficient, and small size suitable for a wide range of aircraft applications. Our prototype instrument measures extinction and scattering coefficient at 690 nm and extinction coefficient at 1550 nm. The instrument itself is small (60 x 48 x 15 cm) and relatively insensitive to vibrations. The prototype instrument has been tested in our lab and used in the field. While improvements in performance are needed, the prototype has been shown to make accurate and sensitive measurements of extinction and scattering coefficients. Combining these two parameters, one can obtain the single-scattering albedo and absorption coefficient, both important aerosol properties. The use of two wavelengths also allows us to obtain a quantitative idea of the size of the aerosol through the Angstrom exponent. Minimum sensitivity of the prototype instrument is 1.5 x 10(exp -6)/m (1.5/Mm). Validation of the measurement of extinction coefficient has been accomplished by comparing the measurement of calibration spheres with Mie calculations. This instrument and its successors have potential to help reduce uncertainty currently associated with aerosol optical properties and their spatial and temporal variation. Possible applications include studies of visibility, climate forcing by aerosol, and the validation of aerosol retrieval schemes from satellite data.

Strawa, A. W.↗

Optical properties of the crustal aerosol - Relation to chemical and physical characteristics

Crustal aerosol absorption, expressed as a wavelength dependent imaginary index of refraction, n(im), was measured at both visible and infrared wavelengths. Measurements at visible wavelengths show values of n(im) that range from 0.02 at 300 nm to 0.004 to 700 nm. Infrared measurements show an absorption that is dominated by a silicate absorption with a maximum value of n(im) of about 1 near 10 microns. Comparisons of the present measurements with other reported measurements of well-documented crustal aerosols show a great deal of similarity among the measured values. It is shown that these measured optical properties, and the similarities and differences in the measured values, can be understood in terms of mineralogical characteristics of the aerosol and fractionation processes that occur in the generation and transport of these aerosols.

Patterson, E. M.↗

The formation of compact groups of galaxies. I: Optical properties

The small crossing time of compact groups of galaxies (t(sub cr)H(sub 0) approximately less than 0.02) makes it hard to understand why they are observable at all. Our dissipationless N-body simulations show that within a single rich collapsing group compact groups of galaxies continually form. The mean lifetime of a particular compact configuration if approximately 1 Gyr. On this time scale, members may merge and/or other galaxies in the loose group may join the compact configuration. In other words, compact configurations are continually replaced by new systems. The frequency of this process explains the observability of compact groups. Our model produces compact configurations (compact groups (CG's) with optical properties remarkably similar to Hickson's (1982) compact groups (HCG's): (1) CG's have a frequency distribution of members similar to that of HCG's; (2) CG's are approximately equals 10 times as dense as loose groups; (3) CG's have dynamical properties remarkably similar to those of HCG's; (4) most of the galaxy members of CG's are not merger remnants. The crucial aspect of the model is the relationship between CG's and the surrounding rich loose group. Our model predicts the frequency of occurrence of CG's. A preliminary analysis of 18 rich loose groups is consistent with the model prediction. We suggest further observational tests of the model.

Diaferio, Antonaldo↗

Electronic and Optical Properties of NV Center in Diamonds for Sensing Applications: Experimental and First Principles Density Functional Theory Approach

The nitrogen-vacancy (NV) center in a nanodiamond (ND) crystal is one of the best candidate materials for quantum sensing and metrology applications at elevated environmental conditions. The NV center can be used to achieve an unprecedented level of sensitivity for sensing applications at high temperatures and pressures. The NV center is also proven to be useful for magnetic field sensing. Furthermore, it can be used for applications in the sensing of valuable minerals such as rare earth elements (REEs) from the crude and waste subsurface materials. This work presents computational and experimental studies on electronic and optical properties of bulk diamond with N and NV defects. ND in MOF/polymer materials will be experimentally encapsulated. The transverse spin relaxation time of the NV center will be measured in bare and encapsulated ND. Different doping elements will be introduced on the surfaces and present surface electronic properties to study the surfaces with shallow NV center for quantum sensing applications.

Paudel, Hari P.↗

Bio-Optical Properties of the Arabian Sea as Determined by In-Situ and SeaWifs Data

The overall objective of this work was to characterize optical and fluorescence properties in the euphotic zone during two British Ocean Flux Study (BOFS) Arabian Sea cruises. This was later expanded in 1995 to include three U.S. Joint Global Ocean Flux Study (JGOFS) Arabian Sea Cruises. The region was to be divided into one or more "bio-optical provinces", within each of which a single set of regression models was to be developed to relate the vertical distribution of irradiance attenuation and normalized fluorescence (SF and NF) to remote sensing reflectance and diffuse attenuation coefficient [K(490)]. The working hypothesis was that over relatively large spatial and temporal scales, the vertical profiles of bio-optical properties were predictable.

Trees, Charles C.↗

First-principles study of the defect-activity and optical properties of FAPbCl 3

With promising solar cell applications, organic–inorganic lead halide perovskites belong to a novel and rapidly developing class of semiconducting materials. Unlike its well-investigated iodide counterparts, formamidinium lead chloride (FAPbCl 3 ) is a much less studied perovskite that shows superior stability and surprisingly high selectivity and sensitivity towards certain gas analytes. The origin of the sensing ability of this perovskite material can be traced to its high defect tolerance and the existence of some defects which act as the “lock” to a certain gas analyte's “key”. In this work, we deepen the understanding of this proven perovskite sensor through first-principles computational study of its defect formation energies, charge transition energies, and optical properties. These studies are done with the widely used GGA exchange–correlation functional PBE and the newer meta-GGA functional SCAN, both incorporating the Grimme's D3 dispersion correction. Additionally, we also consider experimental conditions and the effect of temperature on electron screening in the simulations, which demonstrates that screening is particularly important when considering high oxidation states of the defects. We also note the importance of antisites in the Fermi Pinning as well as the importance of FA disorder, which are previously unreported insights.

36 MATERIALS SCIENCE↗

Effect of Ram and Zenith Exposure on the Optical Properties of Polymers in Space

The temperature of spacecraft is influenced by the solar absorptance and thermal emittance of the external spacecraft materials. Optical and thermal properties can degrade over time in the harsh low Earth orbital (LEO) space environment where spacecraft external materials are exposed to various forms of radiation, thermal cycling, and atomic oxygen. Therefore, it is important to test the durability of spacecraft materials in the space environment. One objective of the Polymers and Zenith Polymers Experiments was to determine the effect of LEO space exposure on the optical properties of various spacecraft polymers. These experiments were flown as part of the Materials International Space Station Experiment 7 (MISSE 7) mission on the exterior of the International Space Station (ISS) for 1.5 years. Samples were flown in ram, wake or zenith directions, receiving varying amounts of atomic oxygen and solar radiation exposure. Total and diffuse reflectance and transmittance of flight and corresponding control samples were obtained post-flight using a Cary 5000 UV-Vis-NIR Spectrophotometer. Integrated air mass zero solar absorptance (s) of the flight and control samples were computed from the total transmittance and reflectance, and compared. The optical data are compared with similar polymers exposed to space for four years as part of MISSE 2, and with atomic oxygen erosion data, to help understand the degradation of these polymers in the space environment. Results show that prolonged space exposure increases the solar absorptance of some materials. Knowing which polymers remain stable will benefit future spacecraft design.

Yuanchun Li↗

High-Yield Synthesis and Optical Properties of Carbon Nanotube Porins

Carbon nanotube porins (CNTPs) are a convenient membrane-based model system for studying nanofluidic transport that replicates a number of key structural features of biological membrane channels. We present a generalized approach for CNTP synthesis using sonochemistry-assisted segmenting of carbon nanotubes. Prolonged tip sonication in the presence of lipid molecules debundles and fragments long carbon nanotube aggregates into stable and water-soluble individual CNTPs with lengths in the range 5–20 nm. We discuss the main parameters that determine the efficiency and the yield of this process, describe the optimized conditions for high-yield CNTP synthesis, and demonstrate that this methodology can be adapted for synthesis of CNTPs of different diameters. We also present the optical properties of CNTPs and show that a combination of Raman and UV–vis–NIR spectroscopy can be used to monitor the quality of the CNTP synthesis. Altogether, CNTPs represent a versatile nanopore building block for creating higher-order functional biomimetic materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, Crystal Structure, and Optical Properties of the Barium meta -Pertechnetate Ba[TcO 4 ] 2

High-quality single crystals of the colorless title compound Ba[ 99 TcO 4 ] 2 were prepared from radioactive, isotope-pure 99 TcO 2 by oxidation with H 2 O 2 in an aqueous ammonia solution and subsequent cation metathesis using an ion-exchange column. Single-crystal X-ray diffraction revealed Ba[TcO 4 ] 2 to crystallize isotopically to Ba[MnO 4 ] 2 in the orthorhombic space group Fddd with the lattice parameters a = 747.34(5) pm, b = 1244.08(7) pm, and c = 1511.23(9) pm for Z = 8. Its crystal structure features [BaO 12 ] 22- icosahedra surrounded by ten [TcO 4 ] - tetrahedra connected via two edges and eight corners. The optical properties of Ba[TcO 4 ] 2 investigated by UV-vis spectroscopy show the broad O 2- → Tc 7+ ligand-to-metal charge transfer (2p → 4d) process within these discrete [TcO 4 ]- anions at an absorption maximum of around 350 nm.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Investigations on the electronic properties and effect of chitosan capping on the structural and optical properties of zinc aluminate quantum dots

Quantum confined uncapped and chitosan capped nanoparticles of ZnAl 2 O 4 synthesized by microwave-assisted sol–gel method were investigated by structural analysis and optical techniques. X-ray diffraction studies confirmed the formation of cubic spinels with crystallite size 4.5 nm and 3.4 nm, respectively for uncapped and chitosan capped ZnAl 2 O 4 nanoparticles. Chitosan capping produced a blue shift in bandgap energy (3.84 to 3.94 eV) agreeing with size effects according to the Brus equation. A blue shift in emission peak and enhancement in photoluminescence intensity was also observed upon chitosan capping. The electronic band structure and the density of states of the bulk spinel were also calculated using density functional theory. The effective masses of electrons and holes estimated based on the band structure were used to extract the excitonic Bohr radius.

36 MATERIALS SCIENCE↗

A Comparison of Cloud Microphysical and Optical Properties during TOGA-COARE

The impact of cirrus clouds on climate is an issue of research interest currently. Whether cirrus clouds heat or cool the Earth-atmosphere system depends on the cloud shortwave albedo and infrared reflectance and absorptance. These in turn are determined by the size distribution, phase, and composition of particles in the clouds. The TOGA-COARE campaign presented an excellent opportunity to study cirrus clouds and their influence on climate. In this campaign, a microphysics instrument package was flown aboard the DC-8 aircraft at medium altitudes in cirrus clouds. This package included a 2D Greyscale Cloud Particle Probe, a Forward Scattering Spectrometer Aerosol Probe, and an ice crystal replicator. At the same time the ER-2 equipped with a radiation measurement system flew coordinated flight tracks above the DC-8 at very high altitude. The radiation measurement made were short and long wave fluxes, as well as narrowband fluxes, both upwelling and downwelling. In addition LIDAR data is available. The existence of these data sets allows for a the comparison of radiation measurement with microphysical measurements. For example, the optical depth and effective radius retrieved from the ER-2 radiation measurements can be compared to the microphysical data. Conversely, the optical properties and fluxes produced by the clouds can be calculated from the microphysical measurements and compared to those measured aboard the ER-2. The assumptions required to make these comparisons are discussed. Typical microphysical results show a prevalence of micron-sized particles, in addition to the cloud particles that exceed 100 mm. The large number of small particles or "haze" cause the effective cloud radii to shift to smaller sizes, leading to changes in optical parameters.

Strawa, A. W.↗

Solid state synthesis, crystal growth and optical properties of urea and p-chloronitrobenzene solid solution

Urea is an attractive material for frequency conversion of high power lasers to UV (for wavelength down to 190 nm), but its usage is hindered due to its hygroscopic nature, though there is no alternative organic NLO crystal which could be transparent up to 190 nm. The hygroscopic character of urea has been modified by making the solid solution (UCNB) of urea (U) and p-chloronitrobenzene (CNB). The formation of the solid solution of CNB in U is explained on the basis of phase diagram, powder XRD, FTIR, elemental analysis and single crystal XRD studies. The solubility of U, CNB and UCNB in ethanol solution is evaluated at different temperatures. Transparent single crystals of UCNB are grown from its saturated solution in ethanol. Optical properties e.g., second harmonic generation (SHG), refractive index and the band gap for UCNB crystal were measured and their values were compared with the parent compounds. Besides modification in hygroscopic nature, UCNB has also shown the higher SHG signal and mechanical hardness in comparison to urea crystal. - Highlights: • The hygroscopic character of urea was modified by making the solid solution • Solid solution formation is support by elemental, powder- and single crystal XRD • Crystal of solid solution has higher SHG signal and mechanical stability. • Refractive index and band gap of solid solution crystal have determined.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, vapor growth, polymerization, and characterization of thin films of novel diacetylene derivatives of pyrrole. The use of computer modeling to predict chemical and optical properties of these diacetylenes and poly(diacetylenes)

In the present work two diacetylene derivatives of pyrrole which are predicted by semiempirical AM1 calculations to have very different properties, are synthesized; the polymerizability of these diacetylenes in the solid state is determined, and the results are compared to the computer predictions. Diacetylene 1 is novel in that the monomer is a liquid at room temperature; this may allow for the possibility of polymerization in the liquid state as well as the solid state. Thin poly(diacetylene) films are obtained from compound 1 by growing films of the monomer using vapor deposition and polymerizing with UV light; these films are then characterized. Interestingly, while the poly(diacetylene) from 1 does not possess good nonlinear optical properties, the monomer exhibits very good third-order effects (phase conjugation) in solution. Dilute acetone solutions of the monomer 1 give intensity-dependent refractive indices on the order of 10 exp -6 esu; these are 10 exp 6 times better than for CS2.

Paley, M. S.↗

Porous cobalt oxide (Co{sub 3}O{sub 4}) nanorods: Facile syntheses, optical property and application in lithium-ion batteries

We developed a facile synthetic route of porous cobalt oxide (Co{sub 3}O{sub 4}) nanorods via a microemulsion-based method in combination with subsequent calcination process. The porous structure was formed by controlled decomposition of the microemulsion-synthesized precursor CoC{sub 2}O{sub 4} nanorods without destruction of the original morphology. The as-prepared Co{sub 3}O{sub 4} nanorods, consisting of small nanoparticles with diameter of 80-150 nm, had an average diameter of 200 nm and a length of 3-5 {mu}m. The morphology and structure of synthesized samples were characterized by transmission electron microscopy and scanning electron microscopy. The phase and composition were investigated by X-ray powder diffraction and X-ray photoelectron spectroscopy. The optical property of Co{sub 3}O{sub 4} nanorods was investigated. Moreover, the porous Co{sub 3}O{sub 4} nanorods exhibited high electrochemical performance when applied as cathode materials for lithium-ion batteries, which gives them good potential applications. - Graphical abstract: The porous Co{sub 3}O{sub 4} nanorods synthesized via a microemulsion-based method in combination with subsequent calcination were applied in the negative electrode materials for lithium-ion batteries and exhibited high electrochemical performance.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Eu 2+ -doped M 2 SiO 4 (M = Ca, Ba) phosphors prepared by a rapid microwave-assisted sol-gel method: Phase formation and optical properties

We present a rapid microwave-assisted approach for the preparation of Eu 2+ -doped orthosilicate phosphors. The preparation method relies on a citrate based sol–gel reaction with subsequent combustion in a domestic microwave oven, in contrast to more conventional solid-state methods. This sol–gel pathway yields phase pure, high quality orthosilicates, in less than 25 min of final heating time. In addition, superior morphology control is achieved employing the sol–gel method compared to solid-state preparations. In order to understand the formation process of the final products, thermogravimetric analyses and temperature-dependent X-ray diffraction data were acquired and compared to the conventional solid-state preparation. The morphology and elemental composition of the obtained luminescent materials were investigated using scanning electron microscopy and energy-dispersive X-ray spectroscopy. The optical properties were elucidated by measuring room-temperature emission and excitation spectra, and the application and efficiency of the obtained phosphors in LED devices was studied.

Birkel, Alexander↗