Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Nanomaterial”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

Magnetic Proximity Effects in Iron Germanium Telluride/Platinum Heterostructures

Van der Waals (vdW) magnetic materials have attracted considerable attention for use in spintronic devices such as those controlled by spin–orbit torque (SOT). Such SOT-driven devices are typically fabricated by bringing a vdW magnet in proximity to a spin–charge conversion layer to achieve current-driven magnetization switching. Here, we show that such structures fabricated with iron germanium telluride (FGT) and platinum can exhibit emergent magnetic properties, which we attribute to magnetic proximity effects at the FGT/Pt interface. These changes manifest as increased perpendicular magnetic anisotropy and the emergence of additional magnetization reversal steps as probed by magneto-transport, with the most significant changes appearing in thinner flakes. The behavior was found to be robust and consistently appeared in samples made with crystals from different vendors. In conclusion, our results demonstrate the potential for engineering vdW spintronic systems through magnetic proximity effects.

2D magnet↗
DOE OSTI2025

Dielectric-Engineered Monolayer MoS 2 Memtransistors for Brain-Inspired Computing with High Recognition Accuracy

Two-dimensional transition metal dichalcogenides (2D-TMDs)-based memtransistors have emerged as promising candidates for neuromorphic hardware due to their exceptional ability to emulate synaptic behavior. However, many existing 2D-TMDs memtransistors rely on polycrystalline channels with grain boundaries or defects introduced through postgrowth treatments, raising concerns about material integrity and the preservation of intrinsic properties. Here, in this work, we demonstrate a monocrystalline monolayer MoS 2 memtransistor fabricated on a silicon nitride (SiN X ) substrate, achieving a large resistive switching ratio of 10 4 , a dynamic range exceeding 90, along with highly linear and symmetric weight updates, minimal cycle-to-cycle variability, and low device-to-device variability. These attributes are critical for enabling high-performance neuromorphic hardware. Based on experimental data, we further show that these artificial synapses enable a recognition accuracy of more than 97% on the MNIST handwritten digits data set. Our findings present a straightforward approach to realizing 2D-TMDs memtransistors through dielectric engineering, offering a promising platform for next-generation neuromorphic computing systems.

2D TMDs↗
DOE OSTI2026

Reaction Mechanism of Electrodeposited ε-MnO 2 : A Proton-Centered Pathway in Aqueous Zn-Ion Systems

Aqueous Zn/MnO 2 batteries have garnered significant interests owing to their abundance, high theoretical specific capacity, safety, and low cost. However, large-scale application of these systems is limited by the incomplete understanding of the MnO 2 reaction chemistry. The different crystal lattice structures among MnO 2 polymorphs contribute to the variations in reported reaction mechanisms. Among them, ε-MnO 2 polymorph, the dominant phase in electrolytic manganese dioxide (EMD), is notably observed during the charge cycles of aqueous Zn/MnO 2 batteries. Here, in this work, we investigate the electrochemical behavior of an ε-MnO 2 cathode synthesized via electrodeposition from a ZnSO 4 and MnSO 4 electrolyte, onto a 3-dimensional carbon cloth substrate. Proton intercalation emerges as the dominant charge storage mechanism, critically enabling the reversibility of ε-MnO 2 during cycling, as revealed by operando synchrotron X-ray diffraction and X-ray absorption spectroscopy. Additionally, a proton-coupled dissolution/redeposition pathway operates alongside minor Zn 2+ intercalation, as quantified by Rietveld refinement. Morphological and chemical heterogeneities are studied by transmission X-ray microscopy further validates this reaction mechanism. These mechanistic insights provide the foundation for rationally designing Zn/MnO 2 batteries with optimized proton dynamics and charge transfer, advancing these systems as a viable solution for safe, cost-effective grid-scale energy storage.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Liquid–Solid Mixtures of Ga Metal Infused with Cu Microparticles and Nanoparticles for Microscale and Nanoscale Patterning of Solid Metals at Room Temperature

This paper demonstrates and characterizes a simple ink for nanopatterning of solid metallic structures under ambient conditions by taking advantage of the low melting point of gallium and its affinity to form intermetallics with other metals. Bare copper micro- and nanoparticles readily mix with liquid gallium near room temperature to form a paste that ultimately amalgamates into a dense solid when mixed at the appropriate concentration ratios. The paste has sufficient shelf life that can be extruded from a nozzle at modest temperatures to form solid three-dimensional (3D) shapes. Additionally, the paste can be molded at room temperature to replicate feature sizes ranging from a few millimeters down to hundreds of nanometers. In situ X-ray diffraction (XRD) and thermo-mechanical analysis (TMA) data show gallium and copper readily interdiffuse to form the thermodynamically expected intermetallic phase. We describe the capabilities and limitations of a simple way to pattern solid metals in an additive fashion (syringe-based extrusion) and with high resolution (molding) at or near room temperature. Here, the use of a paste that solidifies provides a novel route for 3D printing of solid metals at ambient temperatures as well as the creation of micro- and nanostructured metallic surfaces that may be useful for optics, non-wetting surfaces, or electronic microcomponents.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Defects in Layered van der Waals Heterostructures: Implications for Thermoelectrics

Layered van der Waals heterostructures provide extraordinary opportunities for applications such as thermoelectrics and allow for tunability of optical and electronic properties. The performance of devices made from these heterostructures will depend on their properties, which are sensitive to the nanoarchitecture (constituent layer thicknesses, layer sequence, etc.). However, performance will also be impacted by defects, which will vary in concentration and identity with the nanoarchitecture and preparation conditions. Here, we identify several types of defects and propose mechanisms for their formation, focusing on compounds in the ([SnSe] 1+δ ) m (TiSe 2 ) n system prepared using the modulated elemental reactants method. The defects were observed by atomic resolution high-angle annular dark-field scanning transmission electron microscopy and can be broadly categorized into those that form domain boundaries as a result of rotational disorder from the self-assembly process and those that are layer-thickness-related and result from local or global deviations in the amount of material deposited. Furthermore, defect type and density were found to depend on the nanoarchitecture of the heterostructure. Categorizing the defects provides insights into defect formation in these van der Waals layered heterostructures and suggests strategies for controlling their concentrations. Strategies for controlling defect type and concentration are proposed, which would have implications for transport properties for applications in thermoelectrics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Laser-Induced Trapping of Metastable Amorphous AlO x /C (2.5 < x ≤ 3.5) Nanocomposites: Implications for Use as Solid Phase Gas Generators

The synthesis of kinetically "frozen" metastable nanostructures remains elusive. This limitation has severely restricted the current paradigms in materials discovery. We overcame this challenge by phase-stabilizing unusually hyperoxidized and metastable amorphous aluminum oxide (a-AlO x ; 2.5 < x ≤ 3.5) nanostructures. Specifically, we employed laser ablation synthesis in solution (LASiS) as a one-pot nonequilibrium technique to achieve this pivotal advancement. Structural and compositional characterizations of the as-synthesized material reveal highly disordered a-AlO x nanoparticles that are remarkably stabilized by interfacial monolayers of ordered carbon atoms. Both structure and chemical composition were confirmed with disparate characterization methods at different length scales. The nanoparticles of sizes less than10 nm were stable even at elevated temperatures. Only at temperatures higher than 750 °C do the a-AlO x structures undergo a solid-solid phase transition that culminates in the formation of stable α-Al 2 O 3 while releasing excess trapped gases. In conclusion, such disruptive materials can find applications in emerging technologies seeking metastable phase-change materials for solid phase gas generators, batteries, neuromorphic computing, and energetic additives.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2025

ThO 2 and Th 1– x U x O 2 Nanoscale Materials and Thin Films for Nuclear Science Applications

This study investigates the dynamics and mechanisms of solution combustion synthesis (SCS) for the preparation of nanoscale ThO 2 and Th 1–x U x O 2 materials, utilizing metal nitrates (Th(NO 3 ) 4 and UO 2 (NO 3 ) 2 ) and acetylacetone (C 5 H 8 O 2 ) as reactants dissolved in a 2-methoxyethanol (C 3 H 8 O 2 ) solvent. By combining thermodynamic calculations, dynamic time–temperature profile measurements with differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA), this research reveals how variations in acetylacetone concentration and uranium content influence the structural parameters of the synthesized oxides. The time–temperature measurements show that the heating rate and maximum combustion temperatures are sensitive to acetylacetone concentration. DSC-TGA results indicate shifts in exothermic peak temperatures as the uranium content changes. The complexation between thorium and acetylacetone emerges as a critical factor, impacting combustion parameters and the structural characteristics of the final products. The uniform distribution of Th and U in the Th 1–x U x O 2 solid solution and the formation of nanoscale particles with strained crystallites are considered essential for the low-temperature densification of these materials for nuclear fuel pellet applications. Additionally, high-quality ThO 2 and Th 1–x U x O 2 thin (100–150 nm) films are successfully synthesized via electrospray deposition of combustible solutions followed by a brief period of heat treatment. Furthermore, these films exhibit excellent structural and morphological uniformity, making them ideal candidates for nuclear measurements, irradiation damage studies, and investigations into the physical properties of both pure and mixed oxides.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Nanocluster Rearrangement Forms a Family of Ordered Cerium–Titanium Bimetallic Metal–Organic Frameworks with Three Different Nodes, Nanocavities, and Thermal Stabilities

Metal–organic frameworks (MOFs) provide a versatile platform for incorporating multiple metal ions within a single crystalline framework, yet achieving spatial and stoichiometric order in heterometallic nodes remains a synthetic challenge. Building on our previously reported, highly thermally stable Ce/Ti bimetallic MOF NU-3000, we identified and isolated two additional crystalline phases, NU-2998 and NU-2999, that arise from the same Ce/Ti nanocluster precursor under modified solvothermal conditions. Systematic variation of reaction temperature, time, solvent ratio, and modulator concentration directs the assembly of these distinct frameworks. Structural analysis and comprehensive characterization studies reveal that these MOFs each feature an unreported nodal geometry with nanocavities of different sizes. NU-2998 even adopts an unreported topology, denoted nui , that features an elongated pore spanning 4 nm. Together, these findings establish a synthesis route that starts with a nanocluster and ends with a set of bimetallic MOFs, offering a glimpse into the pathway-dependent assembly of multimetallic porous materials. Finally, we evaluated the thermal stability of each additional analogue and compared them to NU-3000, providing further insight into material stability. NU-3000 maintained the highest thermal stability and was evaluated as a catalyst for CO oxidation at elevated temperatures.

bimetallic MOFs↗
DOE OSTI2025

Electrochemical Corrosion and Catalysis Dynamics of Tin Oxide during Water Oxidation

Metal oxide corrosion severely limits anodic electrocatalysis, particularly at high potentials in acidic environments, where degradation pathways remain poorly defined. This study establishes explicit connections between corrosion and electrocatalysis on tin oxide during water oxidation by examining the roles of lattice defects, reactive oxygen species, interfacial pH variations, and speciation of corroded tin in acid. We first demonstrate the presence of structural defects such as oxygen vacancies and substoichiometric Sn(II) species by integrating electron paramagnetic resonance spectroscopy, ultraviolet photoelectron spectroscopy, and Mott–Schottky analysis. Kohn–Sham density functional theory calculations reveal that explicit water structures thermodynamically stabilize reaction intermediates and lower reaction overpotentials. Moreover, we propose that water dissociation leads to hydrogen-bonding networks formed by H* and OH* intermediates, which may span the entire catalyst surface and decrease the interfacial pH to drive corrosion. In contrast, the electrochemical generation of reactive oxygen species is shown to play a minor role in catalyst corrosion during water oxidation using inductively coupled plasma mass spectrometry coupled with selective chemical scavengers. Square-wave voltammetry combined with rotating ring-disk electrodes is used to reveal that under open-circuit conditions, only Sn(IV) cations chemically dissolve from tin oxide, while both Sn(IV) and Sn(II) species electrochemically corrode during water oxidation. Our results unveil a dynamic and complicated interplay between corrosive and catalytic pathways on metal oxide electrocatalysts: a decrease in interfacial pH due to water oxidation exacerbates Sn(II)/Sn(IV) corrosion. Subsequently, the electrochemical corrosion of Sn(II)/Sn(IV) facilitates product formation from lattice oxygen, while the redeposition of corroded Sn(II) as Sn(IV) can enable oxygen exchange with water. By elucidating the roles of defects and interfacial chemistry, this work provides a roadmap for engineering improved electrocatalysts that balance activity and stability, a critical step toward scalable and durable energy technologies.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Low-Temperature Catalyst Redispersion: A Route to Enhanced Stability of Supported Metal Catalysts?

Sintering poses a significant challenge to achieving the long-term stability of supported metal catalysts under reaction conditions. Here, in this study, we report a low-temperature catalyst redispersion mechanism, in which platinum single atoms, which aggregate into nanoparticles under Reverse Water Gas Shift (RWGS) conditions at elevated temperatures, fragment into atomically dispersed species upon cooling. Using multimodal operando characterization combined with first-principles theoretical modeling, we track the structural evolution of Pt single atoms supported on ceria nanodomes, deposited either on ceria or ceria–titania mixed oxides. We find that fragmentation is more pronounced when cooling occurs under RWGS conditions compared to CO alone, owing to a synergistic interplay of the effects of H 2 , CO 2 , and CO. The support architecture has a strong influence on the extent of redispersion: while CO alone induces fragmentation on ceria, interfacial confinement and vacancy pinning at the ceria–titania interface suppress restructuring. In contrast, RWGS conditions overcome these barriers, enabling redispersion across both supports. These findings point toward a pathway for catalyst stabilization via reaction-induced redispersion under mild conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

In Situ Studies of Ru-CeO 2 –TiO 2 Catalysts for Selective CO 2 Hydrogenation to Methane: Importance of Metal ↔ Oxide–Oxide Interactions

Here, this work investigates Ru-CeO 2 -TiO 2 catalysts for the CO 2 methanation reaction and compares their performance with previously studied Ru-CeO 2 systems. Despite the lower Ru loading, the TiO 2 -containing catalysts exhibit significantly higher activity. To understand this behavior, in situ X-ray absorption spectroscopy (XAS) was carried out at the Ru K-edge and Ce L 3 -edge. Unlike Ru-CeO 2 , which displays reversible redox behavior of Ru, the Ru-CeO 2 -TiO 2 catalysts show irreversible Ru reduction and a substantially higher fraction of Ce 3+ species under all tested conditions (H 2 , CO 2 , H 2 /CO 2 ). The stabilization of metallic Ru during methanation, together with the enhanced formation of Ce 3+ promoted by TiO 2 through interfacial electronic transfer, accounts for their superior performance. Complementary in situ DRIFTS measurements reveal the formation and rapid consumption of bidentate carbonates and formates. These species act as a key intermediate in methane formation. Overall, these findings highlight the crucial role of the mixed CeO 2 -TiO 2 oxide in tuning the surface chemistry of the catalysts by stabilizing metallic Ru, enhancing ceria reducibility, and promoting efficient reaction pathways for CO 2 methanation. The manipulation of metal↔oxide-oxide interactions can be a very useful tool when dealing with the valorization of CO 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Stable Co-valorization of Carbon Dioxide and Methane via Dynamic Reconstruction of a Metal Oxide Solid Solution Catalyst

Dry reforming of methane (DRM) is a process that converts two greenhouse gases (methane and carbon dioxide) into syngas, a mixture of H 2 and CO, that can lead to a variety of value-added chemicals. Owing to its endothermic nature, high reaction temperatures up to 800 °C are typically required and the grand challenge lies in developing robust catalysts without sintering and coking-induced deactivation during the long-term on-stream operation. Towards this aim, herein, a robust complex oxide-supported NiCu alloy catalyst was generated in situ during DRM. By leveraging the configurational stability of a solid oxide solution precursor, tightly anchored NiCu bimetallic nanoparticles were in situ exsoluted and acted as the active sites in DRM. The as-afforded catalyst exhibited stable performance for DRM due to the ability to repel coke off the surface as the reaction proceeds. Kinetic experiments along with top surface characterization detail the reconstruction behavior of the solid oxide solution under DRM reaction conditions. In conclusion, the fundamental insights from this work provide guidance on generating resistant and flexible catalysts via in situ active sites formation from easily synthesized metal oxide solid solutions.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2026

4-Electron Oxygen Reduction Reaction (ORR) with Iron Phthalocyanine (FePc) Functionalized Nanowire Templated-3D Fuzzy Graphene (NT-3DFG)

Iron phthalocyanine (FePc) is a promising alternative to platinum-based catalysts for sustainable energy devices; however, the plane-symmetry of Fe-N 4 sites, random aggregation, and poor conductivity of FePc present major barriers for their application as oxygen reduction reaction (ORR) electrocatalysts. Here, we report the synergistic effects of FePc electrocatalysts supported by a nanowire-templated three-dimensional fuzzy graphene (FePc@NT-3DFG) substrate. The in situ functionalized oxygen groups (iFOGs) at the edge of NT-3DFG localize Fe active sites in FePc under alkaline ORR conditions. With a uniform FePc distribution through many single layers of graphene, the NT-3DFG substrates improve O 2 adsorption and catalytic activity while stabilizing the electrochemical activity during reactions. The FePc@NT-3DFG catalyst exhibits fast ORR kinetics with an extremely low Tafel slope of 28.3 ± 2.7 mV dec −1 , a higher half-wave potential of 0.911 ± 0.004 V (vs RHE), and notable long-term stability at 0.5 V (vs RHE) of 96.0 ± 0.4% retention after 30 h. Surface chemistry spectra validate electronic configuration modification of Fe at the iFOGs. Density functional theory calculations indicate that the extra layers of graphene improve oxygen adsorption. Moreover, additional exploration of other transition metal phthalocyanines supports the effects of iFOGs through the transition toward 4e − ORR. This work offers an expanded strategy for active site modification through edge-based graphene substrates for 4e − ORR.

X-ray absorption spectroscopy↗
DOE OSTI2025

Toward Fullerene-Free PIN Perovskite Solar Cells

We highlight opportunities for a transformative shift in perovskite solar cell design by expanding electron transport layers (ETLs) beyond fullerenes. Fullerenes have known limitations, including constraints on open-circuit voltage, stability, and mechanical integrity. Recently, fullerene-free p-i-n cells with power conversion efficiencies exceeding 25% have been demonstrated via both naphthalene diimide-SnO x bilayers and nonfullerene acceptor-based ETLs. Despite successes, fullerenes remain the de facto ETLs for perovskites. Drawing lessons from organic photovoltaics, where it took decades to transition from fullerenes to more broadly available and efficient materials, we explore pathways to accelerate the development and adoption of fullerene-free ETLs. This requires understanding the similarities and differences between organic and perovskite solar cells, which will necessitate carefully designing fullerene replacements with both, high efficiency and also, critically, durability under operation. Here, we incorporate literature data to facilitate comparisons, and independently conduct fracture energy measurements for alternative ETL configurations to motivate their adoption.

14 SOLAR ENERGY↗
DOE OSTI2025

On-Surface Reactions of Electronically Active Self-Assembled Monolayers for Electrode Work Function Tuning

Self-assembled monolayers (SAMs) help improve the performance of organic electronic devices through interface passivation and enhanced carrier transport. Yet, there is limited information regarding the chemical structure of the SAMs upon functionalization and subsequent thermal treatment. Here, we studied the on-surface reaction of carbazole-derived SAMs on model gold electrodes, focusing on the chemical structure changes induced by thermal treatments. Furthermore, we correlate the microscopic changes with their impact on the electrode’s work function. The carbazole-based SAMs first transform into organometallic complexes. At higher annealing temperatures, SAMs convert to oligomeric complexes. The observed chemical reactions significantly reduce the electrode work function and facilitate electron injection in n-type organic thin-film transistors. Our results highlight the on-surface synthesis of electronically active SAMs as an alternative approach for modifying the work function of electrodes for organic electronics.

77 NANOSCIENCE AND NANOTECHNOLOGY↗
DOE OSTI2025

Conductive Organometallic Polymers from Soluble Superatom Ions

Superatomic crystals comprising ligand-capped, metal chalcogenide clusters and fullerenes are modular materials that exhibit enhanced electronic, magnetic, and thermal conductivity properties. We find that neutral, M 4 S 4 (M = Fe, Co) clusters stabilized with N -heterocyclic carbenes (NHCs) can transfer charge to C 60 fullerene to form binary superatomic crystals. Notably, these compounds are soluble in various organic solvents, allowing their properties to be investigated in solution, unlike traditional fullerene-based superatomic crystals. The ion pairs can be further assembled into organometallic polymers using Janus-bis(NHCs) to cross-link the oxidized M 4 S 4 units. We show that the superatomic polymers are more conductive than both the precursor superatomic crystals and the polymers containing only neutral M 4 S 4 clusters. Similar conductivity values can be obtained when neutral M 4 S 4 –NHC polymers are doped with solutions of C 60 fullerene. These findings demonstrate that next generation superatomic materials can be prepared via the combination of charge transfer and polymerization with appropriate cross-linking agents.

carbon nanomaterials↗
DOE OSTI2020

Intrinsic Ion Transport Properties of Block Copolymer Electrolytes

Knowledge of intrinsic properties is of central importance for materials design and assessing suitability for specific applications. Self-assembling block copolymer electrolytes (BCEs) are of great interest for applications in solid-state energy storage devices. A fundamental understanding of ion transport properties, however, is hindered by the difficulty in deconvoluting extrinsic factors, such as defects, from intrinsic factors, such as the presence of interfaces between the domains. Here, we quantify the intrinsic ion transport properties of a model BCE system consisting of poly(styrene-block-ethylene oxide) (SEO) and lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) salt using a generalizable strategy of depositing thin films on interdigitated electrodes and self-assembling fully connected parallel lamellar structures throughout the films. Comparison between conductivity in homopolymer poly(ethylene oxide) (PEO)-LiTFSI electrolytes and the analogous conducting material in SEO over a range of salt concentrations (r, molar ratio of lithium ion to ethylene oxide repeat units) and temperatures reveals that between 20% and 50% of the PEO in SEO is inactive. Using mean-field theory calculations of the domain structure and monomer concentration profiles at domain interfaces-both of which vary substantially with salt concentration-the fraction of inactive PEO in the SEO, as derived from conductivity measurements, can be quantitatively reconciled with the fraction of PEO that is mixed with greater than a few volume percent of polystyrene. Despite the detrimental interfacial effects for ion transport in BCEs, the intrinsic conductivity of the SEO studied here (ca. 10 -3 S/cm at 90 degrees C, r = 0.085) is an order of magnitude higher than reported values from bulk samples of similar molecular weight SEO (ca. 10 -4 S/cm at 90 degrees C, r = 0.085). Finally, this work provides motivation and methods for pursuing improved BCE chemical design, interfacial engineering, and processing.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗