Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MHD simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Solar Energetic Proton Access to the Inner Magnetosphere During the September 7–8, 2017 Event

Here, the access of solar energetic protons into the inner magnetosphere on September 7–8, 2017 is investigated by following reversed proton trajectories to compute the proton cutoff energy using the Dartmouth geomagnetic cutoff code (Kress et al., 2010, https://doi.org/10.1029/2009sw000488). The cutoff energies for protons coming from the west and east direction, the minimum and maximum cutoff energy respectively, are calculated every 5 min along the orbit of Van Allen Probes using TS07 and the Lyon-Fedder-Mobarry (LFM) MHD magnetic field model. The result shows that the cutoff energy increases significantly as the radial distance decreases, and that the cutoff energy decreases with the building up of the ring current during magnetic storms. Solar wind dynamic pressure also affects cutoff suppression (Kress et al., 2004, https://doi.org/10.1029/2003gl018599). The LFM-RCM model shows stronger suppression of cutoff energy than TS07 during strong solar wind driving conditions. The simulation result is compared with proton flux measurements, showing consistent variation of the cutoff location during the September 7–8, 2017 geomagnetic storm.

79 ASTRONOMY AND ASTROPHYSICS↗

FES 2023 Theory & Simulation Performance Target

The Report for the 2023 Theory & Simulation Performance Target (TSPT) is presented herein. The 1st, 2nd and 3rd Quarter Reports are given in Sec. I, Sec. II and Sec. III. These are unchanged from those previously submitted, except that in this final document the equations, figures and citations have been automatically renumbered. The 4th Quarter Report is given in Sec. IV. The following material presents verification calculations of several widely used three-dimensional (3D) magnetohydrodynamic (MHD) equilibrium codes in strongly shaped configurations; for both fixed and free-boundary equilibria; for the so-called vacuum case and for the case of high plasma pressure; and, for magnetic fields that have nested magnetic surfaces and for fields that have a magnetic island. The configurations studied includes the recently discovered “precise-QA” case [Phys. Rev. Lett., 128, 035001 (2002)] and other highly optimized configurations. Because of the strong (extreme) shaping, the latter of these pose challenges to the 3D MHD codes. A new method is introduced for constructing coordinates in arbitrarily shaped toroidal domains, and this can improve the robustness of 3D equilibrium calculations. Beyond the equilibrium calculation, this report demonstrates the capability of performing non-linear extended-MHD modelling of optimized stellarator equilibria. This capability allows the assessment not only of linear stability thresholds but also of the nonlinear evolution of unstable equilibria to new configurations that might be far from the original configuration, with significantly different transport properties and magnetic topology. They also enable the self-consistent determination of pressure profiles in non-integrable magnetic topology through the use of highly anisotropic thermal-transport equations. The calculations presented here represent the first demonstration of extended-MHD calculations in strongly-shaped, optimized quasi-symmetric configurations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A two-dimensional MHD global coronal model - Steady-state streamers

We describe a two-dimensional time-dependent, numerical, magnetohydrodynamic model for the determination of the physical properties of coronal streamers from the top of the transition zone (solar radius = 1) to 15 solar radii. Four examples are given: for dipole, quadrupole, and hexapole initial field topologies. The computed parameters are density, temperature, velocity, and magnetic field. In addition to the properties of the solutions, their accuracy is discussed. We use the model as the basis for a general discussion of the way boundary conditions are specified in this and similar simulations.

Wang, A.-H.↗

Multiscale Hybrid Modeling of the Impact Response of the Earth's Magnetotail to Ionospheric O+ Outflow

Ionospheric outflow plays an important role in coupling the ionosphere with the solar wind-magnetosphere system. Previous multi-fluid MHD studies explored the global influence of oxygen ions of ionospheric origin (O+) on magnetospheric dynamics. A detailed exploration of the interaction of ionospheric ions with the magnetotail requires kinetic treatment for ions. We perform a self-consistent investigation of these processes with a three-dimensional space-time adaptive hybrid code, HYPERS, powered by an intelligent Event-driven Multi-Agent Planning System (EMAPS). By comparing simulations with and without outflow we conclude that oxygen ions, flowing from the ionosphere through the lobes into the tail or directly entering the inner magnetosphere, are able to significantly modify the magnetotail configuration and induce X-points and current sheet structures at locations where magnetic reconnection does not occur in a simulation without outflow, potentially very close to the Earth. This finding may have implications for interpreting substorms and magnetotail reconnection events observed for southward magnetic field simultaneously with significant contents of oxygen ions of ionospheric origin.

multiscale↗

Pedestal particle balance studies in JET-ILW H-mode plasmas

JET-ILW type I ELMy H-modes at 2.5 MA/2.8 T with constant NBI heating (23 MW) and gas fuelling rate were performed, utilising edge localised mode (ELM) pacing by vertical kicks and plasma shaping (triangularity, δ) as tools to disentangle the effects of ELMs, inter-ELM transport and edge stability on the pedestal particle balance. In agreement with previous studies, the pedestal confinement improves with increasing δ, mostly due to a significant increase in pedestal density while the ELM frequency ($f_{\mathrm{ELM}}$) is decreased. Improved pedestal confinement with increasing δ was observed even when the pedestal MHD stability was degraded artificially by vertical kicks, implying that increased triangularity may favourably affect the inter-ELM pedestal recovery. The workflow developed to quantify the pedestal particle balance uses high time-resolution profile reflectometry to characterise the inter-ELM evolution of the plasma particle content ($\mathrm{d} N/\mathrm{d}t$), the NEO drift-kinetic solver to evaluate the neoclassical fluxes and interpretative EDGE2D-EIRENE simulations to estimate the edge particle source. The edge particle source is then constrained by deuterium Balmer-α line intensity measurements in the main chamber, which are, however, strongly affected by reflections from the metal walls. The reflections are accounted for by the CHERAB code taking the divertor emission (the brightest light source in the torus) distribution from imaging spectroscopy measurements as input. Our analysis shows that in the second half of the ELM cycle, the volume-integrated particle source is larger than $\mathrm{d} N/\mathrm{d}t$, indicating that transport plays a key role in the inter-ELM pedestal recovery.

fuelling↗

Omnigenous stellarators with improved ideal and kinetic ballooning stability

Omnigenity is a property of a magnetic field which ensures confinement of trapped particles. It is a necessary requirement for any high-performance stellarator. After creating an omnigenous equilibrium, one must also ensure reduced transport resulting from kinetic and magnetohydrodynamic (MHD) instabilities. To this end, we leverage the GPU-accelerated DESC optimization suite, which is used to design stable, finite-β omnigenous equilibria with poloidal, toroidal, and helical symmetry, achieving Mercier, ideal ballooning, and as a consequence, improved kinetic ballooning stability. We discover stellarators with second stability, a regime of large pressure gradient where an equilibrium becomes ideal ballooning stable, and demonstrate and explore both using theory and gyrokinetic simulations the connection between ideal and kinetic ballooning stability.

optimization↗

The Influence of Pickup Protons, from Interstellar Neutral Hydrogen, on the Propagation of Interplanetary Shocks from the Halloween 2003 Solar Events to ACE and Ulysses: A 3-D MHD Modeling Study

We describe our 3-D, time ]dependent, MHD solar wind model that we recently modified to include the physics of pickup protons from interstellar neutral hydrogen. The model has a time-dependent lower boundary condition, at 0.1 AU, that is driven by source surface map files through an empirical interface module. We describe the empirical interface and its parameter tuning to maximize model agreement with background (quiet) solar wind observations at ACE. We then give results of a simulation study of the famous Halloween 2003 series of solar events. We began with shock inputs from the Fearless Forecast real ]time shock arrival prediction study, and then we iteratively adjusted input shock speeds to obtain agreement between observed and simulated shock arrival times at ACE. We then extended the model grid to 5.5 AU and compared those simulation results with Ulysses observations at 5.2 AU. Next we undertook the more difficult tuning of shock speeds and locations to get matching shock arrival times at both ACE and Ulysses. Then we ran this last case again with neutral hydrogen density set to zero, to identify the effect of pickup ions. We show that the speed of interplanetary shocks propagating from the Sun to Ulysses is reduced by the effects of pickup protons. We plan to make further improvements to the model as we continue our benchmarking process to 10 AU, comparing our results with Cassini observations, and eventually on to 100 AU, comparing our results with Voyager 1 and 2 observations.

Detman, T. R.↗

Identification of a non-axisymmetric mode in laboratory experiments searching for standard magnetorotational instability

Abstract The standard magnetorotational instability (SMRI) is a promising mechanism for turbulence and rapid accretion in astrophysical disks. It is a magnetohydrodynamic (MHD) instability that destabilizes otherwise hydrodynamically stable disk flow. Due to its microscopic nature at astronomical distances and stringent requirements in laboratory experiments, SMRI has remained unconfirmed since its proposal, despite its astrophysical importance. Here we report a nonaxisymmetric MHD instability in a modified Taylor-Couette experiment. To search for SMRI, a uniform magnetic field is imposed along the rotation axis of a swirling liquid-metal flow. The instability initially grows exponentially, becoming prominent only for sufficient flow shear and moderate magnetic field. These conditions for instability are qualitatively consistent with SMRI, but at magnetic Reynolds numbers below the predictions of linear analyses with periodic axial boundaries. Three-dimensional numerical simulations, however, reproduce the observed instability, indicating that it grows linearly from the primary axisymmetric flow modified by the applied magnetic field.

79 ASTRONOMY AND ASTROPHYSICS↗

A code-to-code benchmark for magneto-convection in a horizontal duct

Liquid metals and magnetic fields are used in many technical applications such as metallurgy, crystal growth and nuclear fusion reactors. When an electrically conducting fluid moves in a magnetic environment, electric currents and electromagnetic forces are generated that affect velocity and pressure losses in the flow. These magnetohydrodynamic (MHD) interactions have to be investigated to optimize the engineering processes. The characteristics of MHD flows depend on the geometrical configuration, the strength of the applied magnetic field, the electrical properties of fluid and structural materials and the thermal conditions. In the so-called blankets for fusion reactors, where liquid metals are used to breed the plasma fuel component tritium and to extract the generated heat, magneto-convective flows play a crucial role in determining heat and mass transfer. Therefore, the availability of numerical codes to simulate this type of flow is mandatory and their validation is a necessary step to guarantee the reliability of the results. For that reason, a benchmark problem has been defined to simulate liquid metal flows in a horizontal rectangular duct heated from below and exposed to a non-uniform magnetic field. Results obtained by five research groups using different codes are compared.

benchmark↗

PFPO plasma scenarios for exploration of long pulse operation in ITER

Long Pulse Scenarios (LPS) in ITER foreseen during the Pre-Fusion Power Operation (PFPO) phase of the ITER Research Plan (IRP) are assessed using 1.5D transport simulations within the ASTRA framework. Such assessment is required to predict the operational space for LPS operation in PFPO, as well as to evaluate which physics processes for LPS operation during Fusion Power Operation (FPO) could be studied during PFPO. An important aspect in the development of LPSs in PFPO is to minimize lifetime consumption of the Central Solenoid (CS) for these scenarios. The maximum pulse length achievable for LPSs in PFPO with no consumption of CS lifetime (currents in CS coils $⩽$30 kA per turn) has been assessed for a range of heating schemes and heating mixes, confinement regimes (L-mode and H-mode) and for helium and hydrogen plasmas. The operational space of LPS and pulse length has been explored through density scans with the Heating and Current Drive mix required for the FPO Q $⩾$ 5 steady-state plasma scenario (namely Neutral Beam Injection and Electron Cyclotron Heating) including acceptable shine through losses on the first wall for both helium and hydrogen plasmas. Fast particle physics aspects that are common between FPO plasmas and LPS PFPO H-mode plasmas at low densities are studied including MHD stability analysis with the KINX code and non-perturbative critical gradient model based on high-n Toroidal Alfven Eigenmodes (TAE) stability kinetic ballooning code HINST calculations.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Radial drift of plasma blobs in a toroidal magnetic field with fully kinetic and reduced fluid models

Abstract In curved magnetic geometries, field-aligned regions of enhanced plasma pressure and density, termed ‘blobs,’ move as coherent filaments across the magnetic field lines. Coherent blobs account for a significant fraction of transport at the edges of magnetic fusion experiments and arise in naturally-occurring space plasmas. This work examines the dynamics of blobs with a fully kinetic electromagnetic particle-in-cell code and with a drift-reduced fluid code. In low-beta regimes with moderate blob speeds, good agreement is found in the maximum blob velocity between the two simulation schemes and simple analytical estimates. The fully kinetic code demonstrates that blob speeds saturate near the initial sound speed, which is a regime outside the validity of the reduced fluid model.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A predicted energetic ion signature of a neutral line in the geomagnetic tail

Under certain assumptions one can predict the formation of a magnetic neutral line on theoretical grounds, generally as a result of an unstable current sheet. Neutral points also seen to form spontaneously in a wide variety of plasma simulatioons, from MHD to fully kinetic. Hence, such magnetic null regions are central to some models of magnetotail energization and magnetic substorms. Yet the observational evidence for such regions remains controversial. This paper presents a new signature of a neutral line: the field-aligned ion beam characteristic of current sheet acceleration becomes dispersed into a 'ridge' in the velocity space distribution function as a neutral line is approached. The results were obtained using single-particle simulations in a fixed magnetic field model. The origin of the ridge is shown to be due to initially earthward going ions which pass through the neutral line region. These ions come from a smaller part of the initially antiearthward flowing distribution, generating the depletion of the distribution function below the ridge.

Martin, R. F., Jr.↗

Hydrodynamic Stability and Magnetic Reconnection in Disks and Stars

The purpose of this grant is to study parametric instability. The simplest example of parametric instability is a harmonic oscillator with a periodic modulation of the spring constant. If the modulation frequency is close to twice the natural frequency of the oscillator, the amplitude of oscillation tends to grow exponentially. The growth rate is proportional to the strength of the modulation, but it also depends upon the closeness to resonance of the two frequencies, and upon natural damping rate or "Q" of the oscillator. Parametric instabilities are very common in physics. A familiar example is a jogger's ponytail--normally a very strongly damped pendulum, it can be destabilized by the variation in effective gravity during the jogger's stride. Observation confirms that the period of the pendulum is half that of the jogger's vertical motion. In astrophysics, parametric instability may occur by external tidal forcing, or by interaction among eigenmodes. In the latter case, an energetic eigenmode may destabilize modes of half its frequency, provided some weak nonlinearity exists to couple them. Under a previous Astrophysical Theory grant (NAGW-2419), the PI discovered a parametric instability of tidally forced disks such as the accretion disks in cataclysmic variables and X ray binaries [2]. The destabilized modes are tightly-wound, incompressible, three-dimensional waves analogous to g-modes and r-modes in stars. Later work has confirmed our analysis [4]. It was hoped that these modes might provide a source of turbulence and angular momentum transport in accretion disks. However, a follow-up investigation of this instability by local numerical simulations, although confirming the analytically estimated growth rates, found negligible angular momentum flux [3]. Other work, partly supported by the ATP, now strongly indicates that the transport mechanism in such disks is magnetohydrodynamic turbulence [6]. Nevertheless, the parametric mechanism may truncate the outer edges of disks in close binaries [2], and it may be important in disks of very low ionization such as protostellar disks, or even cataclysmic-variable disks in quiescence where the MHD mechanism may be ineffective [5]. All analyses up to 1996 were done in a local approximation where the orbital frequency, shear rate, and tidal field were treated as constants. The locally computed growth rate turns out to depend strongly on radius, and it was unclear how to average these local rates to obtain the correct global rate. This is a critical issue for accretion disks in close binaries, because the local growth rate is comparable to the orbital frequency towards the outer edge of the disk but decreases rapidly inwards. Paper #1 examined this issue in a simplified global model where the destabilizing terms vary with position. We found that the global growth rate is essentially equal to the maximum local rate, provided that the latter is smoothed over a radial range equal to the distance that the destabilized wave propagates at its group speed in one growth time. Thus, in an accretion disk, waves would grow rapidly in the outer parts but would propagate both inwards and outwards at a maximum group speed of order the disk thickness divided by the orbital period.

Goodman, Jeremy↗

Local models of two-temperature accretion disc coronae – II. Ion thermal conduction and the absence of disc evaporation

We use local stratified shearing-box simulations with magnetic field-aligned thermal conduction to study an idealized model of the coupling between a cold, radiatively efficient accretion disc, and an overlying, hot, two-temperature corona. Evaporation of a cold disc by conduction from the hot corona has been proposed as a means of mediating the soft-to-hard state transitions observed in X-ray binary systems. We model the coronal plasma in our local disc patch as an MHD fluid subject to both free-streaming ion conduction and a parametrized cooling function that captures the collisional transfer of energy from hot ions to colder, rapidly cooling leptons. In all of our models, independent of the initial net vertical magnetic flux (NF) threading the disc, we find no evidence of disc evaporation. The ion heat flux into the disc is radiated away before conduction can heat the disc’s surface layers. When an initial NF is present, steady-state temperature, density, and outflow velocities in our model coronae are unaffected by conduction. Instead of facilitating disc evaporation, thermal conduction is more likely to feed the disc with plasma condensing out of the corona, particularly in flows without NF. Our work indicates that uncertainties in the amount of NF threading the disc hold far greater influence over whether or not the disc will evaporate into a radiatively inefficient accretion flow compared to thermal conduction. We speculate that a change in net flux mediates disc truncation/evaporation.

79 ASTRONOMY AND ASTROPHYSICS↗

A magnetospheric magnetic field model with flexible current systems driven by independent physical parameters

A tilt-dependent magnetic field model of the Earth's magnetosphere with variable magnetopause standoff distance is presented. Flexible analytic representations for the ring and cross-tail currents, each composed of the elements derived from the Tsyganenko and Usmanov (1982) model, are combined with the fully shielded vacuum dipole configurations of Voigt (1981). Although the current sheet does not warp in the y-z plane, changes in the shape and position of the neutral sheet with dipole tilt are consistent with both MHD equilibrium theory and observations. In addition, there is good agreement with observed Delta B profiles and the average equatorial contours of magnetic field magnitude. While the dipole field is rigorously shielded within the defined magnetopause, the ring and cross-tails currents are not similarly confined, consequently, the model's region of validity is limited to the inner magnetosphere. The model depends on four independent external parameters. We present a simple but limited method of simulating several substorm related magnetic field changes associated with the disrupion of the near-Earth cross-tail current sheet and collapse of the midnight magnetotail field region. This feature further facilitates the generation of magnetic field configuration time sequences useful in plasma convection simulations of real magnetospheric events.

Hilmer, Robert V.↗

Investigation of mode activity in NBI-heated experiments of Wendelstein 7-X

The 2018 operation phase (OP 1.2b) of the stellarator Wendelstein 7-X (W7-X) included, for the first time, neutral beam injection (NBI) to heat the plasma. Since the injection geometry at W7-X is not parallel, this generates both passing and trapped fast particles. During longer phases of NBI injection, with the primary purpose to study the heating efficiency of this system, Alfvén eigenmodes (AEs) were observed by a number of diagnostics, including the phase contrast imaging (PCI) system, the magnetic pick-up coils (Mirnov coils), and the soft x-ray multi-camera tomography system (XMCTS). Alfvén eigenmodes are of great interest for future fusion reactors as it has been shown that the resonant interaction of fast ions with self-excited AEs can lead to enhanced transport of fast ions and potentially to energy losses. This is especially true for so-called gap-modes, Alfvén eigenmodes with frequencies in gaps of the continuous spectrum, since they lack continuum damping. These modes are commonly known to be excited by fast ions, but other destabilizing mechanisms, e.g. the electron-pressure gradient are also possible. In this article we present a first analysis of the experimentally observed frequencies from the theoretical side. The calculation of shear Alfvén wave continua for selected cases and the assignment of observed frequencies to the gaps of the continuous spectra are presented. Using the ideal-MHD code CKA (Könies A. 2007 10th IAEA TM on Energetic Particles in Magnetic Confinement System), we find gap modes that match the experimental measurements in terms of the observed frequencies. We emphasize the crucial roles played by the coupling of sound and Alfvén waves as well as of the Doppler shift arising as a consequence of the radial electric field in W7-X. We employ the perturbative gyrokinetic code CKA-EUTERPE (Feh´er 2013 Simulation of the interaction between Alfv´en waves and fast particles), using a slowing-down distribution function for the fast ions as calculated by the Monte-Carlo particle following code ASCOT (Hirvijoki et al 2014 Comput. Phys. Commun. 185 1310–21) to assess the fast-ion drive. Here we find that the fast-ion drive is insufficient to overcome the background-plasma damping. The fact that unstable modes were observed experimentally may point to problems with the modelling or indicate the existence of other destabilizing mechanisms, e.g. associated with the electron-pressure gradient (Windisch et al 2017 Plasma Phys. Control. Fusion 59 105002) that sensitively depend on the profiles of the background plasma.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Experimental Plans for Subsystems of a Shock Wave Driven Gas Core Reactor

This Contractor Report proposes a number of plans for experiments on subsystems of a shock wave driven pulsed magnetic induction gas core reactor (PMI-GCR, or PMD-GCR pulsed magnet driven gas core reactor). Computer models of shock generation and collision in a large-scale PMI-GCR shock tube have been performed. Based upon the simulation results a number of issues arose that can only be addressed adequately by capturing experimental data on high pressure (approx.1 atmosphere or greater) partial plasma shock wave effects in large bore shock tubes ( 10 cm radius). There are three main subsystems that are of immediate interest (for appraisal of the concept viability). These are (1) the shock generation in a high pressure gas using either a plasma thruster or pulsed high magnetic field, (2) collision of MHD or gas dynamic shocks, their interaction time, and collision pile-up region thickness, and (3) magnetic flux compression power generation (not included here).

Kazeminezhad, F.↗

Investigating the role of edge neutrals in exciting tearing mode activity and achieving flat temperature profiles in LTX-β

Abstract We present observations, numerical simulations, and analysis from experiments in the Lithium Tokamak Experiment-Beta (LTX- β ) in which the electron temperature profile ( T e ( r )) shifts from flat to peaked and a tearing mode is also destabilized when the average density ( n e ave ) exceeds ∼10 19 m −3 . Flat T e ( r ) is obtained routinely in LTX- β , with a lithium coated, low-recycling first wall, once the external fueling is stopped and density decays [Boyle et al 2023 Nucl. Fusion 63 056020]. In the present experiment, flat T e profiles can be sustained while maintaining constant n e ave below a line averaged density threshold ( n e ave th ) of ∼10 19 m −3 . Above n e ave th , T e ( r ) shifts from flat to peaked and a tearing mode is destabilized. Due to low recycling, the achieved n e ave can be controlled precisely by external fueling and hence, a certain threshold of the edge neutral inventory from the external fueling is experimentally manifested through n e ave th . The goal of the present work is to investigate the role of edge neutrals in determining T e ( r ) and MHD stability in the unique low-recycling regime of LTX- β . Our hypothesis is that the peaking of T e ( r ) beyond n e ave th is due ultimately to the edge cooling by the cold neutrals beyond a critical fueling flux. At lower fueling flux, flat T e ( r ) results in broader pressure profile and lower resistivity, which in turn stabilizes the tearing mode. This hypothesis is supported by edge neutral density estimation by DEGAS 2 code. Mode analysis by singular value decomposition confirms the tearing mode structure to be m / n = 2/1 ( m and n being the poloidal and toroidal mode numbers). Linear tearing stability analysis with M3D-C1 predicts that plasmas with n e ave > 10 19 are highly susceptible to a n = 1 tearing mode. ORBIT simulations, however, confirmed that the tearing modes do not contribute to the loss of fast ions from neutral beam injection. This study shows for the first time that the neutral inventory at the edge could be one of the deciding factors for the achievability of the unique operation regime of flat T e ( r ) and the excitation of tearing activity that could be disruptive for the plasmas.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗