Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC PROPERTIES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Investigation on structural, optical and magnetic properties of double perovskite Gd{sub 2}NiMnO{sub 6}

Single phase double perovskite Gd{sub 2}NiMnO{sub 6} was prepared by conventional solid state reaction route. X-ray diffraction (XRD) result reveals that the compound possess monoclinic structure with space group P2{sub 1}/n. Optical characterization performed at room temperature via UV-visible spectroscopy confirms Gd{sub 2}NiMnO{sub 6} as a direct band-gap material with band gap of ∼1.5 eV. Magnetization measurement in Zero field cooled (ZFC) condition at H = 100 Oe shows magnetic transition at ∼ 125 K. Due to competing interactions between magnetic ions (Ni{sup 2+} and Mn{sup 4+}), we could observe two magnetic transition below 40 K.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electrochemical and Magnetic Properties of Electrospun SrTi{sub 1−x}Fe{sub x}O{sub 3} (x = 0, 0.05 and 0.10) Nanofibers for Anodes of Li-Ion Batteries

SrTi{sub 1−x}Fe{sub x}O{sub 3} (x = 0, 0.05 and 0.1) nanofibers (NFs) were fabricated by electrospinning technique. As prepared products were calcined at 800 {sup ∘} C in argon atmosphere for 3 h to obtain a perovskite phase. The crystal structure and morphology of samples were investigated using X-ray diffraction (XRD), transmission electron microscopy (TEM) and scanning electron microscopy (SEM). Electrochemical and magnetic properties of calcined NFs were studied using a potentiostat/galvanostat electrochemical cell system and vibrating sample magnetometer (VSM), respectively. XRD results showed the cubic perovskite structure of calcined samples with the diameter estimated by TEM in the range of 137.4–141.3 nm SEM micrographs revealed the linkage of crystalline grains in NFs of porous and rough surfaces. Electrochemical properties performed on coin-cell-type Li-ion batteries (LIBs) with calcined SrTi{sub 1−x}Fe{sub x}O{sub 3} (x = 0.05 and 0.10) NF-based anodes showed a significant increase of the specific capacity from 305 to 431 mAh/g for the first cycle with the reversible values of 100 and 130 mAh/g, respectively. VSM measurements at room temperature (RT) indicated that calcined SrTiO{sub 3} NFs exhibited paramagnetic (PM) behavior, while calcined SrTi{sub 1−x}Fe{sub x}O{sub 3} NFs displayed ferromagnetic (FM) behavior at RT with the increase of unsaturated magnetization at 10 kOe from 0.46 to 0.82 emu/g for samples with x = 0.05 and 0.10, respectively. The observed FM behavior in calcined SrTi{sub 1−x}Fe{sub x}O{sub 3} (x = 0.05 and 0.1) NFs was suggested to originate from the face center exchange (FCE) mechanism owing to Fe{sup 3+} –Vo–Fe{sup 3+} couplings.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and magnetic properties of nanosized Mg(Fe{sub 0.8}Ga{sub 0.2}){sub 2}O{sub 4-{delta}} films on Si substrates

Film samples of nominal Mg(Fe{sub 0.8}Ga{sub 0.2}){sub 2}O{sub 4-{delta}} composition were obtained on Si(100) substrates by oxygen-ion-beam sputtering of a Mg(Fe{sub 0.8}Ga{sub 0.2}){sub 2}O{sub 4-{delta}} ceramic target. The film thicknesses were {approx}200 and {approx}400 nm. Field dependences of the specific magnetization of {approx}200-nm films annealed at different temperatures (800-1000 Degree-Sign C) have been measured. The crystal structure, surface morphology, and magnetic characteristics of films of different thicknesses ({approx}200 and {approx}400 nm) are investigated. The reasons for the discrepancy between the specific magnetizations of the films obtained and their ceramic analog are discussed.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Growth and magnetic property of antiperovskite manganese nitride films doped with Cu by molecular beam epitaxy

Manganese nitrides thin films on MgO (100) substrates with and without Cu-doping have been fabricated by plasma assisted molecular beam epitaxy. Antiperovskite compounds Mn{sub 3.6}Cu{sub 0.4}N have been grown in the case of Cu-doping, and the pure Mn{sub 3}N{sub 2} single crystal has been obtained without Cu-doping. The Mn{sub 3.6}Cu{sub 0.4}N exhibits ferrimagnetism, and the magnetization of Mn{sub 3.6}Cu{sub 0.4}N increases upon the temperature decreasing from 300 K to 5 K, similar to Mn{sub 4}N. The exchange bias (EB) effects emerge in the Mn{sub 3.6}Cu{sub 0.4}N films. The EB behavior is originated from the interfaces between ferrimagnetic Mn{sub 3.6}Cu{sub 0.4}N and antiferromagnetic metal Mn, which is verified to be formed by the data of x-ray photoelectron spectroscopy. The present results not only provide a strategy for producing functional antiperovskite manganese nitrides, but also shed promising light on fabricating the exchange bias part of spintronic devices.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of air annealing on structure and magnetic properties of Sn{sub 1-x}Fe{sub x}O{sub 2} thin films

Sn{sub 1-x}Fe{sub x}O{sub 2} (x = 0.07) thin films were prepared on to glass substrates using flash evaporation technique and annealed in air at different temperatures. The X-ray diffraction study showsed that all the thin films annealed at different temperatures were in tetragonal rutile structure of SnO{sub 2}. The Elemental analysis confirms the presence of Fe and Sn and O in the films. The magnetic measurements were carried out using vibrating sample magnetometer and found that the strength of magnetization decreased with increase of annealing temperature.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, crystal structure and magnetic properties of the open framework compound Co{sub 3}Te{sub 2}O{sub 2}(PO{sub 4}){sub 2}(OH){sub 4}

The new compound Co{sub 3}Te{sub 2}O{sub 2}(PO{sub 4}){sub 2}(OH){sub 4} was synthesized using hydrothermal techniques. It crystallizes in the monoclinic space group C2/m with the unit cell a=19.4317(10) A, b=6.0249(3) A, c=4.7788(2) A, {beta}=103.139(5){sup o}. The crystal structure is an open framework having chains of edge sharing [Co(1)O{sub 6}] octahedra. Other building blocks are [TeO{sub 3}(OH){sub 2}], [PO{sub 4}] and [Co({sub 2})O{sub 2}(OH){sub 4}] connected mainly via corner sharing. The -OH groups protrude into channels in the structure. The magnetic susceptibility measured from 2 to 300 K shows two broad anomalies at around 21 K and 4 K, respectively. The peak at {approx}20 K is ascribed to a two-dimensional antiferromagnetic ordering of linear [Co(1)O{sub 6}] chains coupled by interchain interaction via [PO{sub 4}] groups in the Co(1) sheets. The second transition at 4 K is ascribed to a second antiferromagnetic ordering of the moments of the Co(2) entities via super-super exchange involving [PO{sub 4}] and [TeO{sub 3}(OH){sub 2}] groups. This assignment is strongly supported by low-temperature heat capacity measurements indicating an entropy removal within the high-temperature transition of about twice the magnitude of the low-temperature transition. - Graphical Abstract: The new compound Co{sub 3}Te{sub 2}O{sub 2}(PO{sub 4}){sub 2}(OH){sub 4} has been synthesized using hydrothermal techniques. It crystallizes in the monoclinic space group C2/m. Building blocks are [Co(1)O{sub 6}], [TeO{sub 3}(OH){sub 2}], [PO{sub 4}] and [Co(2)O{sub 2}(OH){sub 4}]. The magnetic susceptibility shows two antiferromagnetic transitions at 21 K and 4 K, respectively. Highlights: > The first cobalt tellurium phosphate has been synthesized and structurally determined. > There are two antiferromagnetic orderings identified, one at 21 K and one at 4 K respectively. > A spin flop transition is observed at low temperatures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural and magnetic properties of epitaxial delafossite CuFeO{sub 2} thin films grown by pulsed laser deposition

Growth of pure phase delafossite CuFeO{sub 2} thin films on Al{sub 2}O{sub 3} (00.1) substrates by pulsed laser deposition was systematically investigated as a function of growth temperature and oxygen pressure. X-ray diffraction, transmission electron microscopy, Raman scattering, and x-ray absorption spectroscopy confirmed the existence of the delafossite phase. Infrared reflectivity spectra determined a band edge at 1.15 eV, in agreement with the bulk delafossite data. Magnetization measurements on CuFeO{sub 2} films demonstrated a phase transition at T{sub C} ≈ 15 ± 1 K, which agrees with the first antiferromagnetic transition at 14 K in the bulk CuFeO{sub 2}. Low temperature magnetic phase is best described by commensurate, weak ferromagnetic spin ordering along the c-axis.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Mild hydrothermal synthesis, crystal structure, thermal behaviour, spectroscopic and magnetic properties of (NH{sub 4}){sub 0.80}Li{sub 0.20}[Fe(AsO{sub 4})F]

The (NH{sub 4}){sub 0.80}Li{sub 0.20}[Fe(AsO{sub 4})F] compound has been synthesized under mild hydrothermal conditions. The compound crystallize in the orthorhombic Pna2{sub 1} space group, with cell parameters a=13.352(9), b=6.7049(9), c=10.943(2) A and Z=8. The compound belongs to the KTiO(PO{sub 4}) structure type, with chains alternating FeO{sub 4}F{sub 2} octahedra and AsO{sub 4} tetrahedra, respectively, running along the 'a' and 'b' crystallographic axes. The diffuse reflectance spectrum in the visible region shows the forbidden electronic transitions characteristic of the Fe(III) d{sup 5}-high spin cation in slightly distorted octahedral geometry. The Moessbauer spectrum at room temperature is characteristic of iron (III) cations. The ESR spectra, carried out from room temperature to 200 K, remain isotropic with variation in temperature; the g-value being 1.99(1). Magnetic measurements indicate the predominance of strong antiferromagnetic interactions. - Graphical Abstract: Three-dimensional structure of (NH{sub 4}){sub 0.80}Li{sub 0.20}[Fe(AsO{sub 4})F], a fluoroarsenate containing lithium and ammonium in the structural cavities. Highlights: > (NH{sub 4}){sub 0.80}Li{sub 0.20}[Fe(AsO{sub 4})F] has been synthesized by mild hydrothermal technique. > The compound exhibits a three-dimensional structure. > Moessbauer spectrum indicates the existence of Fe(III) cations. > Visible spectroscopy confirms the hexacoordination of Fe(III). > Magnetic measurements indicate the existence of a global antiferromagnetic ordering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effect of magnesium addition on structural and magnetic properties of NiO, Co{sub 3}O{sub 4} nanoparticles

Magnesium added NiO and Co{sub 3}O{sub 4} nanoparticles were prepared from microwave assisted method. The cubic phase natures of NiO, Co{sub 3}O{sub 4} nanoparticles have been ascertained from X-ray diffraction. XRD pattern reveals the size of the particles was reduced to quantum level for NiO than Co{sub 3}O{sub 4} due to the addition of magnesium ion. FTIR spectra have been performed to identify the vibration peaks of metal oxygen. Room temperature magnetic measurement ensures small ferromagnetic nature for Mg added NiO with higher saturation magnetization. superparamagnetic nature was examined for Mg added Co{sub 3}O{sub 4} nanoparticles.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Crystal structure and magnetic properties of Na{sub 2}Ni{sup II}(HPO{sub 3}){sub 2}

Na{sub 2}Ni(HPO{sub 3}){sub 2}, obtained as light yellow-green crystals under mild hydrothermal conditions, crystallizes in the orthorhombic Pnma space-group with lattice parameters: a=11.9886(3), b=5.3671(2), c=9.0764(3) A, V=584.01 A{sup 3}, Z=4. The structure consists of zig-zag chains of NiO{sub 6} octahedra bridged by two HPO{sub 3}{sup 2-} and the chains are further connected through HPO{sub 3}{sup 2-} to four nearest chains to form a three dimensional framework, delimiting intersecting tunnels in which the sodium ions are located. The Na cations reside in the irregular Na(1)O{sub 5}, Na-O of 2.276-2.745 A, and Na(2)O{sub 9}, Na-O of 2.342-2.376 A, environments. The presence of the phosphite monoanion has been further confirmed by IR spectroscopy. Due to the 3D framework of Ni connected by O-P-O bridges, the magnetic susceptibility behaves as a paramagnet above 100 K (C=1.49(2) emu K mol{sup -1}, {mu}{sub eff}=3.45 {mu}{sub B}, {Theta}=-39(2) K) and below 6 K, it orders antiferromagnetically as confirmed the sharp drop and the non-Brillouin behavior of the isothermal magnetization at 2 K. - Graphical abstract: The structure of Na{sub 2}Ni(HPO{sub 3}){sub 2} consists of zig-zag chains of NiO{sub 6} octahedra bridged by two HPO{sub 3}{sup 2-} and the chains are further connected through HPO{sub 3}{sup 2-} to four nearest chains to form a three dimensional framework, delimiting intersecting tunnels in which the sodium ions are located. It orders antiferromagnetically at 6 K. Display Omitted

36 MATERIALS SCIENCE↗

Magnetic Properties of Mn-Substituted Zn–Mg- and Zn–Co-Nanosized Compounds

Mn-substituted Zn–Mg and Zn–Co with chemical formula Mn{sub 0.3}Mg{sub 0.2}TM{sub 0.5}Fe{sub 2}O{sub 4} (TM = Zn or Co) fine powders have been synthesized by glycol-thermal process. XRD results reveal the formation of a cubic phase without any impurity phases. TEM images show nearly spherical particles with fairly distributed particles with an average crystallite size of about 14 nm. {sup 57}Fe Mössbauer spectral studies show well-resolved magnetic splitting in the Mn–Mg–Co oxide due to stronger superexchange interactions. FC and ZFC magnetization data revealed the superparamagnetic nature of the compounds investigated. Mn–Mg–Zn nanoparticles are blocked at about 206 K while the maximum blocking temperature of Mn–Mg–Co-nanosized oxide is above 300 K. These differences were discussed on the basis of Stoner-Wohlfath relation T{sub B} = KV /25k{sub B}.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Inorganic anion-dependent assembly of zero-, one-, two- and three-dimensional Cu(II)/Ag(I) complexes under the guidance of the HSAB theory: Synthesis, structure, and magnetic property

To systematically explore the influence of inorganic anions on building coordination complexes, five novel complexes based on 1-(benzotriazole-1-methyl)−2-propylimidazole (bpmi), [Cu(bpmi){sub 2}(Ac){sub 2}]·H{sub 2}O (1), [Cu(bpmi){sub 2}(H{sub 2}O){sub 2}]·2NO{sub 3}·2H{sub 2}O (2), [Cu(bpmi)(N{sub 3}){sub 2}] (3), [Ag(bpmi)(NO{sub 3})] (4) and [Cu{sub 3}(bpmi){sub 2}(SCN){sub 4}(DMF)] (5) (Ac{sup −}=CH{sub 3}COO{sup −}, DMF=N,N-Dimethylformamide) are synthesized through rationally introducing Cu(II) salts and Ag(I) salt with different inorganic anions. X-ray single-crystal analyses reveal that these complexes show interesting structural features from mononuclear (1), one-dimensional (2 and 3), two-dimensional (4) to three-dimensional (5) under the influence of inorganic anions with different basicities. The structural variation can be explained by the hard-soft-acid-base (HSAB) theory. Magnetic susceptibility measurement indicates that complex 3 exhibits an antiferromagnetic coupling between adjacent Cu(II) ions. - Graphical abstract: Five new Cu(II)/Ag(I) complexes show interesting structural features from mononuclear, one-dimension, two-dimension to three-dimension under the influence of inorganic anions. The structural variation can be explained by the HSAB theory. - Highlights: • Five inorganic anion-dependent complexes are synthesized. • Structural variation can be explained by the hard-soft-acid-base (HSAB) theory. • The magnetic property of complex has been studied.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural, Electrical, and Magnetic Properties of Ferrite-Reinforced PANI Composites

A Y-type hexagonal ferrite with chemical composition CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} was prepared by a sol-gel auto combustion technique. Y-ferrite/PANI nanocomposites were prepared by in situ polymerization of PANI with general formula CaBaCo{sub 2}In{sub 0.5}Fe{sub 11.5}O{sub 22} (1-x) + PANI (x) (x = 0.30, 0.50, 0.8, and 1) with nomenclature CF1, CF2, CF3, and P respectively. The samples were characterized by X-ray diffraction (XRD) and electrical and magnetic measurements. X-ray diffraction revealed that Y-type ferrite was successfully prepared in a single phase form. DC resistivity increases with increasing ferrite filler in nanocomposites due to large resistive behavior of ferrite in conducting polymer matrix. The dielectric constant, dielectric loss, and AC conductivity decreases with the increase of ferrite content. The dielectric is high due to interfacial polarization at low frequency, and it is low at high frequency following Maxwell-Wagner model. The coercivity increases with the decrease of ferrite filler content whereas saturation magnetization and remanence decreases which is due to random distribution of ferrite filler particles in PANI matrix. Due to large coercivity and low values of ε′ and ε″, the present samples may be useful in recording media and electromagnetic shielding.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Magnetic Properties and Photocatalytic Behavior of Co Co-doped BiFeO{sub 3}:Er

The multiferroic materials Bi{sub 0.95}Er{sub 0.05}Fe{sub 1−x}Co{sub x} O{sub 3} (x = 0, 0.01, 0.03, and 0.05) are synthesized by solvothermal method. X-ray diffraction pattern is used to confirm the formation of rhombohedral crystal structure. TEM images show agglomerated nanosize particles. With the concentration of Co, a red shift is observed in the charge transfer transition of O{sub 2p}-Fe{sub 3d} band and band gap decreases. At higher concentration of Co, the saturation magnetization enhances and coercivity also varies with the concentration of Co. The photocatalytic degradation of methylene blue is evaluated under the visible light with the assistance of H{sub 2}O{sub 2}. With the increase in Co concentration, the photocatalytic activity decreases. The main species responsible for the degradation is found out using scavengers like ammonium oxalate, silver nitrate, p-benzoquinone, and tert-butyl-alcohol. The possible mechanism for the degradation of dye is explained.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Effect of Ti and Zn Doping on the Structural, Electric, and Magnetic Properties of GaFeO{sub 3}

Multidoped (Zn,Ti) gallium orthoferrite [GaFeO{sub 3} and Ga{sub 0.98}Zn{sub 0.02}Fe{sub 0.98}Ti{sub 0.02}O{sub 3}] ceramic was synthesized through a solid-state reaction. X-ray analysis of the prepared material provides its basic crystal data of a single-phase orthorhombic system. The scattered crystallite size and lattice strain of the material were estimated. Analysis of the micrograph of field emission scanning electron microscope shows uniform grain distribution in the sample, suggesting the formation of good quality of sample. Founded on the magnetic measurements, it is concluded that (Zn,Ti)-modified gallium ferrite has provided a reduction in the Curie temperature (T{sub C}); however, no significant changes in the magnetization values with Zn and Ti integration in GaFeO{sub 3} lattice. A noteworthy effect of substitution of multiple elements at the Ga and Fe sites on dielectric constant and tangent loss of GaFeO{sub 3} has been observed. Complete studies of temperature (180–400 K) and frequency (10–10{sup 7} Hz) dependence of dielectric constant and impedance have provided the effect of grains and grain boundaries on the conduction mechanism and dielectric relaxation of the material.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and magnetic properties of nanocrystalline Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) synthesized by a mechanochemical route

Highlights: • A mechanochemical reaction produces Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl in ambient conditions. • Heating at 600 °C and ulterior washing yields ferrite phase for all the compositions. • The synthesized powders consist of agglomerates of Bi{sub 1-x}La{sub x}FeO{sub 3} nanoparticles. • La-content influences the crystal structure and Néel temperature of the materials. • The presence of two canting levels of antiparallel spins causes a complex magnetism. - Abstract: Bi{sub 1-x}La{sub x}FeO{sub 3} (0.0 ≤ x ≤ 0.4) powders were prepared by means of a solid acid-base reaction induced by mechanochemical energy. Bi, La and Fe chlorides were high-energy ball-milled with NaOH, yielding a mixture of Bi{sub 1-x}La{sub x}FeO{sub 3} and NaCl. After heating and washing, nanoparticles of Bi{sub 1-x}La{sub x}FeO{sub 3} were obtained as a main product, with low contents of secondary phases. Structural characterization was performed by X-ray diffraction (Rietveld refinement) and Raman spectroscopy. The hyperfine magnetic behavior was analyzed by means of Mössbauer spectroscopy and the microstructure of the particles was evaluated by transmission electron microscopy. Differential scanning calorimetry was employed to investigate the thermal behavior of the samples and magnetic measurements at room temperature were also carried out. Crystal structure transitions as a function of composition were identified. Moreover, an intricate magnetic behavior was observed, which was explained on the basis of the concomitant contribution of two different canting levels of the antiparallel spins.

36 MATERIALS SCIENCE↗