Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Low Temperature”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Deleterious effects of non-framework Al species on the catalytic performance of ZSM-5 crystals synthesized at low temperature

ZSM-5 is one of the most widely studied and commercially relevant zeolites. It is also one of the few zeolites that can be synthesized in an all-silica form (silicalite-1), and thus serves as a prototype for mechanistic studies of zeolite crystallization. The MFI framework of ZSM-5 is amenable to a broad range of synthesis conditions, which has led to numerous discoveries of materials with unique physicochemical properties. The exceptional performance of ZSM-5 among zeolite catalysts, coupled with its facile synthesis, has given rise to its widespread use in industrial applications. In this study we highlight the challenges associated with synthesizing ZSM-5 at low temperature (ca. 100 °C), which is often necessary to generate small crystals (<200 nm) with an appreciable quantity of acid sites (i.e. Si/Al < 25). We focus on the incorporation of non-framework Al, which includes extra-framework (octahedral) Al and penta-coordinated Al, as well as Al zoning – a common phenomenon where the density of Al sites within the framework is more prevalent at the outer rim and exterior surfaces of ZSM-5 crystals. We show that synthesis at low temperature, and most notably in growth mixtures containing high aluminum concentration, results in the incomplete incorporation of Al into the ZSM-5 framework that can be partially removed through post-synthesis mild acid treatment. We also show that higher synthesis temperature (170 °C) facilitates the incorporation of framework Al; however, in all cases the catalysts prepared in this study exhibit relatively low activity owing in part to the presence of Al defects. The library of ZSM-5 catalysts prepared herein are characterized using methanol to hydrocarbons as a benchmark reaction to assess the performance of various as-made and acid treated samples. Our findings suggest that ZSM-5 may be more difficult to synthesize than is commonly perceived, most notably when examining the various types of defects in crystalline products over a wide range of synthesis conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Improving Performance and Durability of Low Temperature Direct Ammonia Fuel Cells: Effect of Backpressure and Oxygen Reduction Catalysts

Low temperature direct ammonia fuel cells (DAFCs) are attractive for transportation applications. The primary obstacle to their commercial use is their low performance and poor durability. In the present work, we focus on improving DAFCs performance and durability by examining the effect of operating backpressure and oxygen reduction reaction (ORR) catalysts such as Acta 4020, Pd/C and Pt/C. DAFCs with Acta 4020 cathode can reach a peak power density of 390 mW cm -2 which is among the best reported performance, but they can be operated for a period of 11 h at 300 mA cm -2 . DAFCs with Pd/C cathode offer a moderate performance with a peak power density of 304 mW cm -2 , but has a much improved durability - a continuous operation for up to 36 h with a slow decay rate of ~1 mV h -1 at 300 mA cm -2 . In addition, the degradation pathways for DAFCs with Pd/C cathode are probed by characterizing the initial and final electrodes by XPS, suggesting that cathodic Pd dissolution occurs during the durability test.

Electrochemistry↗

Synthesis of carbon nanotube/anatase titania composites by a combination of sol-gel and self-assembly at low temperature

A simple method is described for the synthesis of carbon nanotube/anatase titania composites by a combination of a sol-gel method with a self-assembly technique at 65 {sup o}C. This method makes use of polyelectrolyte for wrapping multi-walled carbon nanotube (MWCNT) and providing them with adsorption sites for electrostatically driven TiO{sub 2} nanoparticle deposition. The composites were characterized using X-ray diffraction, transmission electron microscopy, Fourier transform infrared and X-ray photoelectron spectroscopy, and photoluminescence for analyzing their crystal phase, microstructure, particle size, and other physicochemical properties. The results showed that MWCNT were covered with an anatase TiO{sub 2} thin layer or surrounded by an anatase TiO{sub 2} thick coating, which is constructed of TiO{sub 2} particles about 6 nm in size. The composites were rich in surface hydroxyl groups. The excited e{sup -} in conduction band of TiO{sub 2} may migrate to MWCNT. Concerning the potential applicability, MWCNT/TiO{sub 2} composites showed excellent photocatalytic activity toward the photodegradation of methyl orange. -- Graphical abstract: MWCNT/anatase TiO{sub 2} composites have been prepared by a combination of a sol-gel method and a self-assembly technique in one step at low temperature without high temperature calcination. Display Omitted Highlights: {yields} MWCNT/anatase TiO{sub 2} composites could be prepared in one-pot at low temperature. {yields} MWCNT were covered with a TiO{sub 2} thin layer or surrounded by a TiO{sub 2} thick coating. {yields} Composites were rich in surface hydroxyl groups. {yields} Composites showed excellent photodegradation activity of methyl orange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Low-temperature atomic layer deposition of TiO{sub 2} thin layers for the processing of memristive devices

Atomic layer deposition (ALD) represents one of the most fundamental techniques capable of satisfying the strict technological requirements imposed by the rapidly evolving electronic components industry. The actual scaling trend is rapidly leading to the fabrication of nanoscaled devices able to overcome limits of the present microelectronic technology, of which the memristor is one of the principal candidates. Since their development in 2008, TiO{sub 2} thin film memristors have been identified as the future technology for resistive random access memories because of their numerous advantages in producing dense, low power-consuming, three-dimensional memory stacks. The typical features of ALD, such as self-limiting and conformal deposition without line-of-sight requirements, are strong assets for fabricating these nanosized devices. This work focuses on the realization of memristors based on low-temperature ALD TiO{sub 2} thin films. In this process, the oxide layer was directly grown on a polymeric photoresist, thus simplifying the fabrication procedure with a direct liftoff patterning instead of a complex dry etching process. The TiO{sub 2} thin films deposited in a temperature range of 120–230 °C were characterized via Raman spectroscopy and x-ray photoelectron spectroscopy, and electrical current–voltage measurements taken in voltage sweep mode were employed to confirm the existence of resistive switching behaviors typical of memristors. These measurements showed that these low-temperature devices exhibit an ON/OFF ratio comparable to that of a high-temperature memristor, thus exhibiting similar performances with respect to memory applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Exothermic low temperature sintering of Cu nanoparticles

Sintering of the Cu nanoparticle at low temperatures resulted in exothermic behavior after its initiation. The calorimetry study of the heating of a 20 nm copper nanoparticles agglomerate revealed the evolution of 41.17 J/g of heat between 170 °C and 270 °C. High resolution transmission electron microscopy (HRTEM) images indicated that the heat generation was accompanied by sintering. The surface energy of the 20 nm copper nanoparticles was estimated to be 1.23 × 10{sup 3} erg/cm{sup 2} based on the heat released during sintering. The in situ high resolution transmission electron microscope (HRTEM) investigation showed that vigorous sintering occurred between 217 and 234 °C, which took place through the dislocation sintering mechanism. - Highlights: • Calorimetry showed exothermic behavior during heating of Cu nanoparticles between 170 and 270 °C. • Heat released due to the sintering of Cu nanoparticles was demonstrated by HRTEM. • Surface energy of 20 nm copper nanoparticles was estimated to be 1.23 × 10{sup 3} erg/cm{sup 2} during sintering. • Growth in crystallite sizes during sintering is disclosed by X-ray diffraction. • In situ HRTEM heating study showed occurrence of sintering through dislocation mechanism.

36 MATERIALS SCIENCE↗

Low Temperature 1H MAS NMR Spectroscopy Studies of Proton Motion in Zeolite

Low temperature {sup 1}H MAS NMR spectroscopy is used to study protonic motion in zeolite HZSM-5 in both samples that have been dried using procedures that are standard in the literature and samples that have been more carefully dehydrated. A significant enhancement of proton mobility is seen for the ''standard'' dehydrated HZSM-5 sample in comparison to that seen for the much drier sample. This is ascribed to a vehicle-hopping mechanism involving the residual water that is present in these zeolites. A gradual change of the framework structure is observed on cooling to approximately 213 K, as monitored via the change in {sup 1}H chemical shift values of the Broensted acid resonances and by X-ray diffraction. A more sudden change in structure is seen by differential scanning calorimetry and NMR at approximately 220?230 K, which is associated with changes in both the mobility and the modes of binding of the residual water to the Broensted acid sites and the zeolite framework.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Role of many-body effects in the coherent dynamics of excitons in low-temperature-grown GaAs

Femtosecond four-wave mixing experiments on low-temperature-grown (LT-) GaAs indicate a polarization-dependent nonlinear optical response at the exciton, which we attribute to Coulomb-mediated coupling between excitons and electron-hole pairs simultaneously excited by the broad-bandwidth laser pulses. Strong suppression of the exciton response through screening by carriers injected by a third pump pulse was observed, an effect that is transient due to rapid carrier trapping. Our findings highlight the need to account for the complex interplay of disorder and many-body effects in the design of ultrafast optoelectronic devices using this material.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Fluid modeling of low-temperature plasmas

Fluid models are essential for understanding and predicting low-temperature plasma (LTP) behavior in various scientific and industrial settings. This paper provides an introductory tutorial on fluid modeling of LTPs, covering model formulation, implementation, and computational simulations. The tutorial focuses on five main components of the formulation of LTP fluid models: fluid flow, energy, chemistry, electromagnetism, and material properties, as well as in essential aspects of model implementations, including multiscale phenomena, multiphysics coupling, and numerical convergence. Designed for students and early-career researchers, this work offers a practical foundation for developing and using fluid models, from in-house computational codes to commercial software, bridging fundamental theory with real-world applications.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

The development of low temperature curing adhesives

An approach for the development of a practical low temperature (293 K-311 K/68 F-100 F) curing adhesive system based on a family of amide/ester resins was studied and demonstrated. The work was conducted on resin optimization and adhesive compounding studies. An improved preparative method was demonstrated which involved the reaction of an amine-alcohol precursor, in a DMF solution with acid chloride. Experimental studies indicated that an adhesive formulation containing aluminum powder provided the best performance when used in conjunction with a commercial primer.

Green, H. E.↗

Low temperature research facilities for shuttle and beyond

This paper describes the Low Temperature Research Facility program now under development at the Jet Propulsion Laboratory. This program will develop the experiments and cryogenic facility to fly experiments requiring temperatures in the liquid helium range, from the superfluid range (1.6 K) to the critical point (5.2 K). A shuttle facility is planned for 1998. It will be flown about every two years after that time. A free flyer is also being evaluated for the end of the decade or early in the next century. A brief discussion of the quality of micro-gravity available in various carriers is also given.

Mason, P.↗

Low Temperature Performance of a Boost Converter with MPP and HTS Inductors

Low temperature performance of a 150 W, 50 kHz, 24/48 V boost PWM dc-to-dc converter is reported. The efficiency of the converter using a molypermalloy powder (MPP) core based inductor went up from 94% at room temperature (23 C) to 95.9% at liquid nitrogen temperature (-196 C). A BSCCO based high temperature superconducting (HTS) inductor with a transition temperature of approximately -158 C was compared to a MPP core based inductor in terms of the power converter performance at liquid nitrogen temperature. The use of the HTS inductor in the converter tested yielded no significant performance improvement over the same converter with the MPP inductor. The experimental results are discussed along with the HTS inductor characteristics.

Ray, Biswajit↗

Metal Oxide Nano-Array Catalysts for Low Temperature Diesel Oxidation. Final Report

In this project, a series of metal oxide nanostructure arrays (nano-arrays) with or without metal decoration, have been successful integrated onto monolithic honeycombs with well-defined size, shape, and chemical compositions, forming a new type of monolithic catalysts. These catalysts have displayed good durability and catalytic performance toward various gas phase catalytic reactions, while showing good potential of reducing the material usage. Specifically in situ grown onto monolithic honeycomb substrates, the metal oxide nanostructure arrays (nano-arrays) (e.g., CeO 2 , Co 3 O 4 , (Cu, Mn)O 2 , (La, Sr)MnO 3 , TiO 2 , etc.), with or without Pt-group metal (PGM) decoration, have displayed good durability and catalytic performance toward catalytic oxidation of hydrocarbons and CO, while showing good potential of reducing the material (noble metal and metal oxides) usage. As unique supports, the nano-array ‘forest-like’ structure configuration proves to improve the dispersion and immobilization of metal nanocatalysts under various aging and reactive conditions, besides the lower pressure drop and improved adherence to the monolith substrates over wash-coated catalysts. On the other hand, electronic interactions between metals and nano-array support are found to be adjustable toward favoring catalytic oxidation while improving the catalyst robustness. Furthermore, chemical leaching treatment in these metal oxide based catalysts could help tune their chemical and structural characteristics, boosting low temperature oxidation reactivity while maintaining robustness. Both CeO 2 and TiO 2 nano-array supported PGM catalysts have shown promising low temperature reactivity with 90% conversion at temperatures approaching 150oC toward CO, HC, and NO x oxidation under both probe and simulated exhaust conditions.

36 MATERIALS SCIENCE↗

Modeling Pre-Spark Heat Release and Low Temperature Chemistry of Iso-Octane in a Boosted Spark-Ignition Engine

Recent trends among automotive manufacturers towards downsized, boosted engines make it imperative to understand specific fuel chemistry interactions encountered in this new operating regime. At these elevated pressure conditions a phenomenon called pre-spark heat release (PSHR) has recently been discovered, characterized by kinetically controlled heat release before spark, leading to changes in end-gas thermodynamic state and composition. These reactions typically occur in the end-gas during normal operation, but are obscured by the deflagration heat release, and therefore cannot be easily studied. A 2-zone spark-ignition engine model was utilized to determine whether chemical kinetic mechanisms predict this phenomenon, and whether they accurately capture end-gas thermodynamic history. Experimental engine data at a range of boosted operating conditions demonstrating PSHR were compared with simulations using mechanisms representing the latest developments in gasoline kinetic modeling. The results demonstrated significant discrepancies between mechanisms, and between experimental and simulated results in terms of low-temperature heat release magnitude and end-gas thermodynamic state. That none of the un-tuned mechanisms matched the experimental results highlights shortcomings in low-temperature reaction pathways, and indicate the necessity of simultaneously matching first-stage ignition delay and heat release magnitude, in addition to second-stage ignition delay, in order to accurately predict end-gas thermodynamics and knock.

Delvescovo, Dan↗