Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IRON OXIDES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2025

A formal Fe III/V redox couple in an intercalation electrode

Iron redox cycling between low-valent oxidation states of Fe II and Fe III drives crucial processes in nature. The Fe II/III redox couple charge compensates the cycling of lithium iron phosphate, a positive electrode (cathode) for lithium-ion batteries. High-valent iron redox couples, involving formal oxidation higher than Fe III , could deliver higher electrochemical potentials and energy densities. However, because of the instability of high-valent Fe electrodes, they have proven difficult to probe and exploit in intercalation systems. Here, in this study, we report and characterize a formal Fe III/V redox couple by revisiting the charge compensation mechanism of (de)lithiation in Li 4 FeSbO 6 . Valence-sensitive experimental and computational core-level spectroscopy reveal a direct transition from Fe III (3d 5 ) to a negative-charge-transfer FeV (3d 5 L 2 ) ground state on delithiation, without forming Fe IV , or oxygen dimers. We identify that the cation ordering in Li 4 FeSbO 6 drives a templated phase transition to stabilize the unique Fe V species and demonstrate that disrupting cation ordering suppresses the Fe III/V redox couple. Exhibiting resistance to calendar aging, high operating potential and low voltage hysteresis, the Fe III/V redox couple in Li 4 FeSbO 6 provides a framework for developing sustainable, Fe-based intercalation cathodes for high-voltage applications.

Ramachandran, Hari [Stanford Univ., CA (United Sta↗
NASA NTRS2011

Evaluation of the Combined Effects of Gamma Radiation and High Dietary Iron on Peripheral Leukocyte Distribution and Function

NASA is concerned with the health risks to astronauts, particularly those risks related to radiation exposure. Both radiation and increased iron stores can independently increase oxidative damage, resulting in protein, lipid and DNA oxidation. Oxidative stress increases the risk of many health problems including cancer, cataracts, and heart disease. This study, a subset of a larger interdisciplinary investigation of the combined effect of iron overload on sensitivity to radiation injury, monitored immune parameters in the peripheral blood of rats subjected to gamma radiation, high dietary iron or both. Specific immune measures consisted of (A) peripheral leukocyte distribution; (B) plasma cytokine levels; (C) cytokine production profiles following whole blood stimulation of either T cells or monocytes.

Crucian, Brian E.↗
NASA NTRS2012

Combined Effects of Gamma Radiation and High Dietary Iron on Peripheral Leukocyte Distribution and Function

Both radiation and increased iron stores can independently increase oxidative damage, resulting in protein, lipid and DNA oxidation. Oxidative stress increases the risk of many health problems including cancer, cataracts, and heart disease. This study, a subset of a larger interdisciplinary investigation of the combined effect of iron overload on sensitivity to radiation injury, monitored immune parameters in the peripheral blood of rats subjected to gamma radiation, high dietary iron or both. Specific immune measures consisted of: (1) peripheral leukocyte distribution, (2) plasma cytokine levels and (3) cytokine production profiles following whole blood mitogenic stimulation

Crucian, Brian E.↗
NASA NTRS1983

Apollo 14 very low titanium glasses - Melting experiments in iron-platinum alloy capsules

This paper describes two techniques that have been developed to produce Fe-Pt alloy capsules for hgh-pressure experiments, and reports liquidus-phase relations of the Apollo 14 very low titanium glasses determined using Fe-rich capsules (a/Fe/ approximately 0.6). The liquid is multiply saturated with olivine and clinopyroxene at equal to or greater than 22 kbar. The multiple saturation is at least 3 kbar higher than that determined using pure Fe capsules and corresponds to a source region at least 60 km deeper if olivine and clinopyroxene were the residual phases. However, independent data on iron activity or oxygen fugacity of the glasses are still needed in order to choose a container of optimum composition. Preliminary experiments in Fe-poor alloy capsules suggest that the valence state of iron and the crystallization sequence in the melt have changed, possibly as a result of oxidizing materials entrapped during the iron-plating processes. The FeO content of the charge decreases linearly with increasing run duration in experiments using pure Fe capsules. The observation that iron-rich globules grow with time suggests that the equilibrium Fe (bleb) + Fe2O3 (liq) = 3 FeO (liq) might be established in the liquid at high pressure. If this explanation is correct, an appreciable amount of 'FeO' in the liquid could actually be Fe2O3, and some natural lunar volcanic glasses may contain ferric iron as well.

Chen, H.-K.↗
DOE OSTI2025

Insights into the Oxidation Mechanism of Vivianite to Metavivianite from First-Principles Calculations

Vivianite, a hydrous ferrous iron-phosphate mineral (Fe 3 (PO 4 ) 2 ·8H 2 O), readily oxidizes in contact with air yielding the less hydrous mixed-valent iron-phosphate mineral metavivianite. This topotactic transformation nominally occurs by oxidative dehydrogenation in which outgoing electrons from the iron sublattice are charge compensated by hydrolysis of structural water. However, the details of this internal charge balancing mechanism that allows the structure to remain electrostatically stable remain unknown. Here, in this study, we use density functional theory (DFT) calculations and ab initio thermodynamics (AIT) to evaluate the energetics of this process in terms of hydrogen release as a function of environmental variables such as partial pressure and temperature. The results show a thermodynamic driving force for vivianite phase transformation as oxidation progresses that is triggered by its rigid structure that has a limited accommodation for hydrogen vacancies. In contrast, metavivianite has a more flexible lattice and hydrogen bond network that stabilizes these hydrogen defects. Metavivianite is shown to be a stable intermediate for 66% residual Fe 2+ down to 33% Fe 2+ , below which other phases/structures such as santabarbarite should be more thermodynamically favorable. Our study provides a basis for experimental tests of our mechanistic findings and helps fill a basic knowledge gap about the solid-state process that defines how vivianite interacts with its surrounding environment.

Sassi, Michel [Pacific Northwest National Laborato↗
NASA NTRS1974

Electrical conductivity of lunar surface rocks - Laboratory measurements and implications for lunar interior temperatures

Results are reported for laboratory measurements of the dc and low-frequency ac electrical conductivity of three lunar rocks with ferrous iron contents of 5 to 26 wt %. The measurements were made at temperatures ranging from 20 to 1000 C, and Mossbauer spectroscopy was used to determine the dependence of electrical conductivity on furnace atmosphere. It is found that the magnitude of electrical conductivity generally increases with increasing iron content. A comparison of the data on these samples with data on terrestrial olivines and pyroxenes shows that the electrical conductivity of anhydrous silicate minerals is influenced primarily by the concentration, oxidation state, and distribution of iron, while the silicate crystal structure is only of secondary importance. Lunar interior temperatures are deduced from experimental lunar conductivity profiles, and the resulting temperature-depth profiles are found to be consistent with those calculated for two different lunar evolutionary models as well as with various experimental constraints.

Schwerer, F. C.↗
NASA NTRS1984

Oxidation and corrosion resistance of candidate Stirling engine heater-head-tube alloys

Sixteen candidate iron base Stirling engine heater head tube alloys are evaluated in a diesel fuel fired simulator materials test rig to determine their oxidation and corrosion resistance. Sheet specimens are tested at 820 C for 3500 hr in 5 hr heating cycles. Specific weight change data and an attack parameter are used to categorize the alloys into four groups; 10 alloys show excellent for good oxidation and corrosion resistance and six alloys exhibit poor or catastrophic resistance. Metallographic, X-ray, and electron microprobe analyses aid in further characterizing the oxidation and corrosion behavior of the alloys. Alloy compositions, expecially the reactive elements aluminum, titanium, and chromium, play a major role in the excellent oxidation and corrosion behavior of the alloys. The best oxidation resistance is associated with the formation of an iron nickel aluminum outer oxide scale, an intermediate oxide scale rich in chromium and titanium, and an aluminum outer oxide scale adjacent to the metallic substrate, which exhibits a zone of internal oxidation of aluminum and to some extent titanium.

Stephens, J. R.↗
DOE OSTI2019

Kinetics of the Carbothermic Reduction of Manganese Oxide from Slag

Experiments were performed using a range of test conditions to elucidate the rate controlling step during the reaction of liquid iron-carbon droplets and slags containing manganese oxide. Four conditions were tested in the system: initial MnO content in the slag (5, 10, and 15 wt pct), initial carbon content of the metal (1, 2.5, 4.3 wt pct), initial droplet mass (0.5, 1.0, and 1.5 g), and reaction temperature (1823 K [1550 °C], 1873 K [1600 °C], and 1923 K [1650 °C]). Data were collected using the Constant Volume Pressure Increase (CVPI) technique which tracked the continuous pressure increase in the sealed furnace over time. Samples were quenched at the end of each experiment and chemistry was checked using LECO Carbon Analysis and ICP (Inductively Coupled Plasma) for manganese. The rate of reaction can be broken into a faster initial period related to internal CO formation, and a slower second reaction controlled by a complex mechanism involving transport of oxygen from slag to metal via CO{sub 2} and decomposition of the CO{sub 2} at the gas–metal interface.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Ammonia Synthesis by a Supported Iron-Lithium Hydride Precatalyst: Silicon Nitride Support Enabled Synthesis and Nitrogen Reservoir Dynamics

Amorphous silicon nitride (Si 3 N 4 ) is an unconventional support for the chemisorption of organometallic complexes and offers potential improvements in active site stability and reactivity through enhanced metal-nitrogen covalency and orbital overlap in bonding interactions with the nitride framework. Here, we show that silicon nitride-supported iron mesityl complexes display divergent reactivity compared to their silica-supported homologues, resisting metallic particle formation under reducing pretreatment conditions (exposure to excess organolithium reagents) and maintaining active iron/lithium speciation under ammonia synthesis conditions that is absent on the oxide support. When the organometallic iron complex on silicon nitride is exposed to excess n-butyllithium, iron remains isolated, catalyzing the conversion of butyllithium to lithium hydride, resulting in a divalent iron site in a polyhydride environment. In contrast, the silica-supported complex is converted to reduced iron clusters without forming persistent isolated hydrides. These structural differences lead to markedly different catalytic behaviors under ammonia synthesis conditions. The Li/Fe/Si 3 N 4 catalyst is highly active (7.5 mol NH 3 /mol Fe/h at 300 °C, 10 bar, or 46 mol NH 3 /mol Fe/h at 400 °C, 10 bar), while both the silica-supported analog and the nonlithiated Si 3 N 4 -supported species are inactive. Notably, this activity is enhanced relative to previously reported iron-lithium hydride composite catalysts (0.43–4.1 mol NH 3 /mol Fe/h at 300 °C, 10 bar) and relative to the industrial benchmark promoted iron catalyst KM1 (3.0 mol NH 3 /mol Fe/h at 400 °C, 10 bar). The catalyst activation and LiH/LiNH x nitrogen reservoir dynamics for Li/Fe/Si 3 N 4 are studied by X-ray Absorption, Mössbauer, and in situ DRIFT spectroscopies and isotopic exchange kinetics.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Microstructure Evolution During Controlled Solidification of “Fe{sub 2}O{sub 3}”-CaO-SiO{sub 2} Liquids in Air

The principal chemical components in iron ore sintering are Fe{sub 2}O{sub 3}, CaO, and SiO{sub 2}. This sintering process consists of three key steps: heating, holding at peak temperature, and cooling. During the cooling stage, a liquid oxide solidifies to form the final sinter microstructures. To investigate the fundamental processes taking place during the cooling of sinters, a new experimental technique has been developed that allows the stages of solidification to be determined in isolation, rather than inferred from the final microstructures. Fe{sub 2}O{sub 3}-CaO-SiO{sub 2} oxide samples of a bulk composition having a CaO/SiO{sub 2} mass ratio of 3.46 and 73.2 wt pct Fe{sub 2}O{sub 3} were cooled in air from 1623 K (1350 °C) at 2 K/s, quenched at 5 K temperature intervals from 1533 K to 1453 K (1260 °C to 1180 °C), and analyzed using Electron Probe Micro X-Ray Analysis (EPMA). During cooling, four distinct stages were observed, consisting of the phase assemblages Liquid + Hematite (I), Liquid + Hematite + C{sub 2}S(II), Liquid + C{sub 2}S + CF{sub 2}(III), and C{sub 2}S + CF{sub 2} + CF (IV). This solidification sequence differs from that predicted under equilibrium and Scheil–Gulliver Cooling. Importantly, no Silico-Ferrite of Calcium (SFC) phase was observed to form on solidification of the liquid. Based on the microstructures formed and liquid compositions, measured by EPMA, it was demonstrated that kinetic factors play a major role in determining the phases and microstructures formed under the conditions investigated.

36 MATERIALS SCIENCE↗
NASA NTRS2004

The Relationship Between Clinopyroxene Fe3+ Content and Oxygen Fugacity

The intrinsic oxygen fugacity (fO2) imposed on a magma has the ability to influence the crystallization sequence of the melt, as well as the composition of the resulting minerals. fO2 is an easily controlled parameter in the lab, either through gas-mixing equilibria or with a solid-state buffer assemblage. In nature, the fO2 of a closed system is imposed on the system internally through multivalent equilibria involving the phenocryst-melt assemblage. This results in a characteristic oxidation state. The physical parameter used to quantify oxidation state is oxygen fugacity. Iron is the only major rock forming element in basaltic melts to exist in multiple valence states and, therefore, it is commonly used to assess fO2. Traditional methods to quantify fO2 utilize the ferric content of glasses or coexisting Fe-Ti oxides. However, many rocks, such as the Martian meteorites, do not contain the necessary phases or have oxides which have suffered reequilibration, thereby rendering them unmeasureable by current techniques. For these rocks, new methods, utilizing other phases are needed. Mafic minerals have Fe(3+)/SigmaFe ratios that are a function of two factors: 1) crystal chemistry and 2) their intrinsic fO2 during crystallization. Olivine and orthopyroxene, for example, have steric constraints on the extent to which Fe(3+) can be incorporated in their structures, and may not record changes in magmatic fO2 in a way that can easily be measured. The chemistry of clinopyroxene, however, allows for extensive incorporation of Fe(3+) in its crystal structure, making it a potentially useful oxybarometer. To date, there have been few, if any, systematic experimental studies of the variation of the Fe(3+)/SigmaFe ratio as a function of fO2 in clinopyroxene. This study seeks to address this lack of data.

McCanta, M. C.↗
DOE OSTI2025

Spectroscopy and crystallography define carotenoid oxygenases as a new subclass of mononuclear non-heme Fe II enzymes

Carotenoid cleavage dioxygenases (CCDs) are non-heme Fe II enzymes that catalyze the oxidative cleavage of alkene bonds in carotenoids, stilbenoids, and related compounds. How these enzymes control the reaction of dioxygen (O 2 ) with their alkene substrates is unclear. Here, we apply spectroscopy in conjunction with X-ray crystallography to define the iron coordination geometry of a model CCD, CAO1 (Neurospora crassa carotenoid oxygenase 1), in its resting state and following substrate binding and coordination sphere substitutions. Resting CAO1 exhibits a five-coordinate (5C), square pyramidal Fe II center that undergoes steric distortion toward a trigonal bipyramidal geometry in the presence of piceatannol. Titrations with the O 2 -analog, nitric oxide, show a >100-fold increase in iron–nitric oxide affinity upon substrate binding, defining a crucial role for the substrate in activating the Fe II site for O 2 reactivity. The importance of the 5C Fe II structure for reactivity was probed through mutagenesis of the second-sphere Thr151 residue of CAO1, which occludes ligand binding at the sixth coordination position. A T151G substitution resulted in the conversion of the iron center to a six-coordinate state and a 135-fold reduction in apparent catalytic efficiency toward piceatannol compared with the wildtype enzyme. Substrate complexation resulted in partial six-coordinate to 5C conversion, indicating solvent dissociation from the iron center. Additional substitutions at this site demonstrated a general functional importance of the occluding residue within the CCD superfamily. Taken together, these data suggest an ordered mechanism of CCD catalysis occurring via substrate-promoted solvent replacement by O 2 . CCDs thus represent a new class of mononuclear non-heme Fe II enzymes.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1993

Cronstedtite and iron sulfide mineralogy of CM-type carbonaceous chondrites from cryogenic Moessbauer spectra

Determinations of oxidation states and the crystal chemistry of iron-bearing minerals in CM meteorites by Moessbauer spectroscopy are complicated by thermally-induced electron hopping in cronstedtite and by ill-defined contributions from the hydrous iron sulphide phase believed to be tochilinite. Moessbauer spectral measurements at 30 K of several cronstedtite and tochilinite specimens have enabled modal proportions of these minerals, as well as Fe(3+)/Fe(2+) ratios, to be determined quantitatively for a suite of CM-type carbonaceous chondrites that included Murchison, Murray, Cold Bokkeveld, ALH 83100, and LEW 90500.

Fisher, Duncan S.↗
NASA NTRS1985

Surface effects of corrosive media on hardness, friction, and wear of materials

Hardness, friction, and wear experiments were conducted with magnesium oxide exposed to various corrosive media and also with elemental iron and nickel exposed to water and NaOH. Chlorides such as MgCl2 and sodium containing films were formed on cleaved magnesium oxide surfaces. The MgCl2 films softened the magnesium oxide surfaces and caused high friction and great deformation. Hardness was strongly influenced by the pH value of the HCl-containing solution. The lower the pH, the lower the microhardness. Neither the pH value of nor the immersion time in NaOH containing, NaCl containing, and HNO3 containing solutions influenced the microhardness of magnesium oxide. NaOH formed a protective and low friction film on iron surfaces. The coefficient of friction and the wear for iron were low at concentrations of NaOH higher than 0.01 N. An increase in NaOH concentration resulted in a decrease in the concentration of ferric oxide on the iron surface. It took less NaOH to form a protective, low friction film on nickel than on iron.

Miyoshi, K.↗
NASA NTRS1985

Surface effects of corrosive media on hardness, friction, and wear of materials

Hardness, friction, and wear experiments were conducted with magnesium oxide exposed to various corrosive media and also with elemental iron and nickel exposed to water and NaOH. Chlorides such as MgCl2 and sodium containing films were formed on cleaved magnesium oxide surfaces. The MgCl2 films softened the magnesium oxide surfaces and caused high friction and great deformation. Hardness was strongly influenced by the pH value of the HCl-containing solution. The lower the pH, the lower the microhardness. Neither the pH value of nor the immersion time in NaOH containing, NaCl containing, and HNO3 containing solutions influenced the microhardness of magnesium oxide. NaOH formed a protective and low friction film on iron surfaces. The coefficient of friction and the wear for iron were low at concentrations of NaOH higher than 0.01 N. An increase in NaOH concentration resulted in a decrease in the concentration of ferric oxide on the iron surface. It took less NaOH to form a protective, low friction film on nickel than on iron.

Miyoshi, K.↗
DOE OSTI2020

Dehalogenation of electrochemical processing salt simulants with ammonium phosphates and immobilization of salt cations in an iron phosphate glass waste form

This study demonstrates the conversion of simulated pyroprocessing salt wastes [i.e., ER(SF) and ERV2] into chemically durable iron phosphate glass waste forms through reactions with ammonium hydrogen phosphate precursors [i.e., NH4H2PO4 and (NH4)2HPO4] and added Fe2O3. The reaction of the salt simulants with the phosphate precursors resulted in dehalogenation of the salt through the production of NH4Cl and NH4I (along with water), of which the NH4Cl can be used to produce UCl3 oxidant for use in the electrorefiner during pyroprocessing. These iron phosphate glasses contain a notably higher waste loading than the baseline glass-bonded sodalite ceramic waste form, which requires about 70 vol% sodalite to accommodate Cl from the salt, because they are dehalogenated prior to vitrification. The high waste loadings coupled with higher bulk densities (~3×103 kg/m3) than glass-bonded sodalite (~2.3×103 kg/m3) mean that these glasses have a higher storage volume, i.e., the volume required to immobilize a given mass of waste. The iron phosphate glass waste forms were characterized using a variety of techniques including physical property measurements and chemical durability testing. Following initial testing, a proof-of-concept demonstration was conducted to show that the NH4Cl generated from this process could be used to produce UCl3 using depleted uranium dendrites as a feedstock.

phosphate glass, pyroprocessing, waste forms, salt↗
DOE OSTI2020

In situ reductive dissolution to remove Iodine-129 from aquifer sediments

The use of an aqueous reductant (Na-dithionite) with pH buffer (K-carbonate, pH 12) was evaluated in this laboratory study as a potential remedial approach for removing Fe oxide associated iodine and enhancing pump-and-treat extraction from iodine-contaminated sediments in the unconfined aquifer in the 200 West Area of the Hanford site. X-ray fluorescence data of untreated sediment indicated that iodine was largely associated with Fe (i.e., incorporated into Fe oxides), however, XANES data was inconclusive as to valence state. During groundwater leaching, aqueous and adsorbed iodine was quickly released, then additional iodine was slowly released potentially from dissolution of one or more surface phases. The Na-dithionite treatment removed greater iodine mass (2.9x) at a faster rate (1 to 4 orders of magnitude) compared to leaching with groundwater alone. Iron extractions for untreated and treated sediments showed a decrease in Fe(III)-oxides, which likely released iodine to aqueous solution. Solid phase inorganic carbon and aqueous Ca and Mg analysis further confirmed that significant calcite dissolution did not occur in these experiments meaning these phases did not release significant iodine. Although it was expected that, after treatment, 127 I concentrations would eventually be lower than untreated sediments, leaching experiments showed continued, elevated iodine concentrations for treated samples over 750 hours. Stop flow events during 1-D column leaching suggested that some iodide precipitated within the first few pore volumes. In the survey of metals during leaching, some silver was detected which could have been solubilized by the elevated pH of initial Na-dithionite injection. Then, silver (or other metals) could have subsequently precipitated with iodide during the initial stop flow event forming a slowly dissolving source. Although significantly greater iodine is removed with treatment, the long-term leaching needs to be investigated further as it may limit dithionite treatment at the field scale.

54 ENVIRONMENTAL SCIENCES↗