Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “IR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS2023

NuSTAR Observations of Four Mid-IR-Selected Dual AGN Candidates in Galaxy Mergers

Mergers of galaxies are a ubiquitous phenomenon in the universe and represent a natural consequence of the “bottom-up” mass accumulation and galaxy evolution cosmological paradigm. It is generally accepted that the peak of active galactic nucleus (AGN) accretion activity occurs at nuclear separations of ≲10 kpc for major mergers. Here we present new NuSTAR and XMM-Newton observations for a subsample of mid-IR preselected dual AGN candidates in an effort to better constrain the column densities along the line of sight (LOS) for each system. Only one dual AGN candidate, J0841+0101, is detected as a single, unresolved source in the XMMNewton and NuSTAR imaging, while the remaining three dual AGN candidates, J0122+0100, J1221+1137, and J1306+0735, are not detected with NuSTAR; if these nondetections are due to obscuration alone, these systems are consistent with being absorbed by column densities of log ( N H /cm −2 ) ≽ 24.9, 24.6, and 24.3, which are roughly consistent with previously inferred column densities in these merging systems. In the case of J0841+0101, the analysis of the 0.3–30 keV spectra reveal an LOS column density of N H ≳ 10 24 cm −2 , significantly larger than the column densities previously reported for this system and demonstrating the importance of the higher signal-to-noise ratio XMM-Newton spectra and access to the >10 keV energies via NuSTAR. Though it is unclear if J0841+0101 truly hosts a dual AGN, these results are in agreement with the high obscuring columns expected in AGNs in late-stage mergers.

AGN host galaxies↗
NASA NTRSDate not supplied

Creating IR-verified Gridded Fire Burn Maps using Public NASA and Satellite Data

Even though fire can be devastating, wildland fire is a natural and integral force on our landscapes, providing value by decreasing fuels at the Wildland Urban Interface (WUI) to promote safe communities. However, uncontained wildfires can devastate communities, threaten our health, and result in substantial economic losses. There has been greater than a $50B increase in wildfire insurance claims from 2017-2021, which has been exacerbated by climate change. Our partners at Kettle reinsurance are focused on building a smarter reinsurance model for protecting today’s globalized world from the catastrophic effects of climate change. Our objective is to develop a high-confidence grid-based wildfire burn product using multiple sources of satellite data to determine whether a ‘conflagration' (fire larger than 999+ acres) has ‘breached’ a grid cell. This product will substantially decrease the time it takes for homeowners to receive payouts, from over a year to a couple months. Working with our partners at Kettle reinsurance, we use VIIRS (Visible Infrared Imaging Radiometer Suite) 375 m fire detections and Sentinel-2 10 m satellite imagery to create a 20-m gridded fire burn product. Our process is based on the level of confidence in the data source and takes into account vegetation change throughout the life of the fire. For example, Sentinel-2 vegetation-change indices have a higher level of confidence when congruent with VIIRS active-fire detection data, rather than VIIRS detections alone. We have also verified our fire burn product against MODIS/ASTER Airborne Simulator (MASTER) Infrared (IR) data from the Fire Influence on Regional to Global Environments Experiment - Air Quality (FIREX-AQ) 2019 campaign, with 88% overall agreement. The first iteration has been developed for responding to wildfires in California, with the possibility to expand nationwide and globally.

Emily Gargulinski↗
NASA NTRSDate not supplied

Status and Progress of All-Sky Hyperspectral IR Radiance Assimilation in GEOS

The majority of hyperspectral infrared radiance observations that peak in the lower and mid-troposphere have been excluded from the assimilation in the operational GEOS by the cloud detection scheme. The significance and challenges of assimilating these cloud-affected observations have attracted the attention of the research community, encouraged by the progress in utilizing all-sky microwave radiances affected by clouds and precipitation in many data assimilation systems, including GEOS. While the Global Modeling and Assimilation Office (GMAO) has made significant progress on the assimilation of cloud-cleared infrared radiances, this parallel study marks the first effort to directly assimilate cloud-affected hyperspectral infrared radiances in the GEOS. This initial study is focused on CrIS-FSR wa:wqter-vapor channels. The capability of the GEOS model and CRTM in simulating infrared radiances affected by clouds has been evaluated, and the all-sky brightness temperature Jacobians with respect to temperature, specific humidity, and hydrometeors are examined closely in varying cloud conditions. With hydrometeor control variables in the GEOS, several important aspects of all-sky IR radiance assimilation are investigated. The symmetric cloud effects are assessed for their robustness when used as the cloud proxy in observation error modeling that incorporates the inter-channel correlations with error situation dependency on the amount of cloud. The effective radius, bias correction and quality control processes will also be adapted to accommodate modifications necessary for all-sky infrared assimilation before comprehensive four-dimensional ensemble-variational(4dEnVar) experiments are conducted to assess their impacts on the analysis and forecast performance of GEOS.

Wei Gu↗
NASA NTRSDate not supplied

UVO to Far-IR Mirror Technology Development: Year 2 Status

UVO to Far-IR (UVO-FIR) mirror technology development project is a multiyear effort initiated in Fiscal Year (FY) 2022 to mature the Technology Readiness Level (TRL) of critical technologies required to enable ultra-stable telescope of the Habitable Worlds Observatory (HWO) mission. 2023/24 accomplishments include: continued investigations into gravity sag by comparing rotation test vs flip test, quantifying gravity sag as a function of temperature and designing mount for mirror whose G-sag with elevation angle is only coma. Significant progress in developing a methodology for specify optical surface microstructure, contamination cleanliness level and allowable micrometeoroid impacts. Support of HWO. And, a parametric cost model for x-ray telescopes and a parametric volume cost model for normal incidence telescopes.

H. Philip Stahl↗
NASA NTRSDate not supplied

A Spectral Fingerprinting Method for Deriving Consistent Climate Data Records from Multiple Satellite IR Sounders

Deriving Climate Data Records (CDRs) from multiple IR sounders such AIRS on Aqua, CrIS on S-NPP, NOAA20 and JPSS-2, IASI on Metop A, B, and C requires from current operational products are challenging due to different radiative transfer models and retireavl algorithms used for processing level 2 data. We developed a Climate Fingerprinting Sounder Product (ClimFiSP) algorithm, which uses a single set of radiative kernels a robust spectral fingerprinting method to performs retrievals using spatiotemporally averaged L1 hyperspectral radiances directly. The ClimFiSP algorithm provides accurate data fusion CDR products from multiple satellite sensors. We have applied this method to both AIRS and CrIS (on SNPP and on NOAA 20) data and generated two decades climate data records for atmospheric temperature, water vapor, cloud, trace gases, and surface skin temperature. We plan to add IASI to the CDR data set in the future. The ClimFiSP is being transitioned to NASA GES DISC data center for public access.

Xu Liu↗
NASA NTRSDate not supplied

Retrieve Methane from IR sounder measurements Using Machine Learning-Enhanced Physical Inversion

The sensitivity of IR sounder measurements to atmospheric CH 4 is often limited due to interferences from signals of other trace gases, insufficient thermal contrast, and cloud blockage. In order to resolve the geographical and vertical distribution of atmospheric CH 4 profiles, accurate scene-dependent a priori information is critically needed to support an optimal estimation method-based physical inversion scheme. Following the principles of indexing, representation, and retrieval, a spectral fingerprinting methodology is developed to address the needs for both accuracy and computational efficiency in sounder-based CH 4 retrieval. Within this framework, a clustering method based on machine learning is first employed to stratify and identify the a priori state within the pre-constructed database, using optimized spectral radiances as predictors. The corresponding radiative kernel is then used to establish the physical inversion scheme for finding the solution. High-quality data from CH 4 data assimilation systems like the Carbon-Tracker and the Copernicus Atmosphere Monitoring Service (CAMS) reanalysis, as well as the state-of-art sounder products are used to build the training database, including radiative kernels. We will demonstrate the results retrieved from CrIS observations and the associated validation work.

Wan Wu↗
NASA NTRSDate not supplied

Complementary Roles of LEO and GEO IR Sounders in NWP Evaluated using an OSSE Framework

The United States is currently preparing for the next-generation weather satellite program. Building off the multi-decadal successes of the Low-Earth Orbit (LEO) infrared (IR) sounder program, NOAA and NASA are planning for the Geostationary eXtended Observations (GeoXO) Sounder (GXS) that will join international counterparts to form a global ring from geosynchronous orbit (GEO). To address questions about the complementarities and roles of these two platform types in the context of numerical weather prediction (NWP) and forecast accuracy, NASA’s Global Modeling and Assimilation Office (GMAO) Observing System Simulation Experiment (OSSE) framework was used to test their impact individually and in concert. Analyses, forecasts, and forecast sensitivity-based observations impact (FSOI) are examined. Overall, each has a role in forecast error reduction with the most beneficial impacts occurring when both LEO and GEO sounders are used together to address the needs of global skill and targeted regional weather phenomena.

Erica Mcgrath-Spangler↗
DOE OSTI2013

Phase-matched generation of coherent soft and hard X-rays using IR lasers

Phase-matched high-order harmonic generation of soft and hard X-rays is accomplished using infrared driving lasers in a high-pressure non-linear medium. The pressure of the non-linear medium is increased to multi-atmospheres and a mid-IR (or higher) laser device provides the driving pulse. Based on this scaling, also a general method for global optimization of the flux of phase-matched high-order harmonic generation at a desired wavelength is designed.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2014

IR Spot Weld Inspect

In automotive industry, destructive inspection of spot welds is still the mandatory quality assurance method due to the lack of efficient non-destructive evaluation (NDE) tools. However, it is costly and time-consuming. Recently at ORNL, a new NDE prototype system for spot weld inspection using infrared (IR) thermography has been developed to address this problem. This software contains all the key functions that ensure the NDE system to work properly: system input/output control, image acquisition, data analysis, weld quality database generation and weld quality prediction, etc.

Chen, Jian↗
DOE OSTI2016

First Test Results of the 150 mm Aperture IR Quadrupole Models for the High Luminosity LHC

The High Luminosity upgrade of the LHC at CERN will use large aperture (150 mm) quadrupole magnets to focus the beams at the interaction points. The high field in the coils requires Nb3Sn superconductor technology, which has been brought to maturity by the LHC Accelerator Re-search Program (LARP) over the last 10 years. The key design targets for the new IR quadrupoles were established in 2012, and fabrication of model magnets started in 2014. This paper discusses the results from the first single short coil test and from the first short quadrupole model test. Remaining challenges and plans to address them are also presented and discussed.

43 PARTICLE ACCELERATORS↗
DOE OSTI2016

Organic photovoltaic devices comprising solution-processed substituted metal-phthalocyanines and exhibiting near-IR photo-sensitivity

Organic photovoltaic (OPV) devices are disclosed. An exemplary device has first and second electrodes and an organic, photovoltaically active zone located between the first and second electrodes. The photovoltaically active zone includes an organic electron-donor material and an organic electron-acceptor material. The electron-donor material includes one or more trivalent- or tetravalent-metal phthalocyanines with alkylchalcogenide ring substituents, and is soluble in at least one organic solvent. This solubility facilitates liquid-processability of the donor material, including formation of thin-films, on an unlimited scale to form planar and bulk heterojunctions in organic OPVs. These donor materials are photovoltaically active in both visible and near-IR wavelengths of light, enabling more of the solar spectrum, for example, to be applied to producing electricity. Also disclosed are methods for producing the metalated phthalocyanines and actual devices.

36 MATERIALS SCIENCE↗
DOE OSTI2019

Thermal Process Monitoring for Wire-Arc Additive Manufacturing Using IR Cameras

Wire-arc additive manufacturing systems use robotic MIG welders to build parts using welding wire. As a part is built the temperature rises as energy is input and the thermal mass increases. While some pre-heat is ideal for welding, improper thermal management can lead to defects and negatively affect material properties. Thermal imaging allows for non-contact thermal monitoring and can be used to track thermal gradients as well as layer temperatures before and after deposition providing a method to ensure proper thermal management. A typical IR camera setup on an mBAAM system is discussed along with methods to use thermal monitoring to improve material properties and reduce defects in the final part.

Carter, William↗
DOE OSTI2019

Materials Data on Ir(C2N3)3 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗
NASA NTRS2018

Development of High Performance Detector Technology for UV and Near IR Applications

Sensing and imaging for ultraviolet (UV) and nearinfrared (NIR) bands has many applications forNASA, defense, and commercial systems. Recentwork has involved developing UV avalanchephotodiode (UV-APD) arrays with high gain for highresolution imaging. Various GaN/AlGaN p-i-n (PIN)UV-APDs have been fabricated from epitaxialstructures grown by MOCVD on GaN substrates withavalanche gains higher than 5 x 10(exp 5), and significantlyhigher responsivities. Likewise, the SiGe materialsystem allows the demonstration of high-performancedetector array technology that covers the 0.5 to 1.7 mwavelength range for visible and NIR bands ofinterest. We have utilized SiGe fabrication technologyto develop Ge based PIN detector devices on 300 mmSi wafers. We will discuss the theoretical andexperimental results from electrical and opticalcharacterization of the detector devices with variousn+ region doping concentrations to demonstrate low dark currents below 1 uA at -1 V and high photocurrent. Recent results from these detectorarrays for UV and NIR detection will be presented.

IR↗
DOE OSTI2017

Collisions of Ir oxide nanoparticles with carbon nanopipettes: Experiments with one nanoparticle

Investigating the collisions of individual metal nanoparticles (NPs) with electrodes can provide new insights into their electrocatalytic behavior, mass transport, and interactions with surfaces. Here we report a new experimental setup for studying NP collisions based on the use of carbon nanopipettes to enable monitoring multiple collision events involving the same NP captured inside the pipet cavity. A patch clamp amplifier capable of measuring pA-range currents on the microsecond time scale with a very low noise and stable background was used to record the collision transients. The analysis of current transients produced by oxidation of hydrogen peroxide at one IrO x NP provided information about the origins of deactivation of catalytic NPs and the effects of various experimental conditions on the collision dynamics. Lastly, high-resolution TEM of carbon pipettes was used to attain better understanding of the NP capture and collisions.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Measured Thermal and Fast Neutron Fluence Rates ATR Cycles 171A IR TMIST 3B

This report contains the thermal (2200 m/s) and fast (E>1MeV) neutron fluence rate data for ATR Cycle 171A which were measured by the Radiation Measurements Laboratory (RML) as requested by the Power Reactor Programs (ATR Experiments) Radiation Measurements Work Order. This report contains fluence rate values corresponding to the particular elevations (relative to the 80-ft. core elevation) where the measurements were taken. The data in this report consists of (1) a table of the ATR power history and distribution, (2) a listing of the calculated thermal and fast neutron fluence rates, and (3) plots of calculated both the thermal and fast neutron fluence rates. The fluence rates reported are for the average power levels given in the table of power history and distribution. During the irradiation of Cycle 152A, the RML performed additional flux measurements to assess core reconfiguration issues. Measurements using cadmium covered as well as bare neutron monitors in the Southwest, Southeast, and H positions of the Center lobe were performed to determine the division in neutron energy between epithermal and thermal neutrons. This is defined as the resonance correction defined in this report. It is used to quantify both thermal and fast neutron flux. For more information please refer to letter, “RADIATION MEASUREMENTS LABORATORY MEASUREMENTS OF IN CORE ATR PHYSICS TESTING DURING CYCLE 152A” dated January 24, 2013, to Casey Stengel from C. C. Jensen. The measured values documented in RML Procedure, “ACMM-3600, Flux Monitoring,” will be used indefinitely until further measurements supersede the current values.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗