Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERMETALLIC COMPOUNDS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Effects of intrinsic magnetostriction on tube-topology magnetoelectric sensors with high magnetic field sensitivity

Three quasi-one-dimensional magnetoelectric (ME) magnetic field sensors, each with a different magnetostrictive wire material, were investigated in terms of sensitivity and noise floor. Magnetostrictive Galfenol, iron-cobalt-vanadium, and iron-nickel wires were examined. Sensitivity profiles, hysteresis effects, and noise floor measurements for both optimally biased and zero-biased conditions are presented. The FeNi wire (FN) exhibits high sensitivity (5.36 mV/Oe) at bias fields below 22 Oe and an optimal bias of 10 Oe, whereas FeGa wire (FG) exhibits higher sensitivity (6.89 mW/Oe) at bias fields >22 Oe. The sensor of FeCoV wire (FC) presents relatively low sensitivity (2.12 mV/Oe), due to low magnetostrictive coefficient. Each ME tube-topology sensor demonstrates relatively high sensitivity at zero bias field, which results from a magnetic shape anisotropy and internal strain of the thin magnetostrictive wire.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

MnBi particles with high energy density made by spark erosion

We report on the properties of low-temperature phase (LTP)-MnBi particles produced by the rapid-quenching technique of spark-erosion. The as-prepared powder consists of amorphous, crystalline, and superparamagnetic particles, mostly as porous aggregates. The major fraction of the powder consists of 20–30 nm particles. A short anneal crystallizes the amorphous particles producing a high moment, >90% of theoretical M{sub S}, albeit with H{sub C} of a few kOe. If lightly milled, the agglomerates are broken up to yield H{sub C} of 1 T. These findings are supported by the x-ray diffraction pattern showing broadened peaks of the predominant LTP-MnBi phase. The combination of spark erosion, milling, and annealing has produced randomly oriented particles with (BH){sub MAX} ∼ 3.0 MGOe. The particles are expected to show record energy product when aligned along their crystallographic easy axes.

36 MATERIALS SCIENCE↗

A study of defects in iron-based binary alloys by the Mössbauer and positron annihilation spectroscopies

The room temperature positron annihilation lifetime spectra and {sup 57}Fe Mössbauer spectra were measured for pure Fe as well as for iron-based Fe{sub 1−x}Re{sub x}, Fe{sub 1−x}Os{sub x}, Fe{sub 1−x}Mo{sub x}, and Fe{sub 1−x}Cr{sub x} solid solutions, where x is in the range between 0.01 and 0.05. The measurements were performed in order to check if the known from the literature, theoretical calculations on the interactions between vacancies and solute atoms in iron can be supported by the experimental data. The vacancies were created during formation and further mechanical processing of the iron systems under consideration so the spectra mentioned above were collected at least twice for each studied sample synthesized in an arc furnace— after cold rolling to the thickness of about 40 μm as well as after subsequent annealing at 1270 K for 2 h. It was found that only in Fe and the Fe-Cr system the isolated vacancies thermally generated at high temperatures are not observed at the room temperature and cold rolling of the materials leads to creation of another type of vacancies which were associated with edge dislocations. In the case of other cold-rolled systems, positrons detect vacancies of two types mentioned above and Mössbauer nuclei “see” the vacancies mainly in the vicinity of non-iron atoms. This speaks in favour of the suggestion that in iron matrix the solute atoms of Os, Re, and Mo interact attractively with vacancies as it is predicted by theoretical computations and the energy of the interaction is large enough for existing the pairs vacancy-solute atom at the room temperature. On the other hand, the corresponding interaction for Cr atoms is either repulsive or attractive but smaller than that for Os, Re, and Mo atoms. The latter is in agreement with the theoretical calculations.

36 MATERIALS SCIENCE↗

Improvement of the thermal stability of sintered Nd-Fe-B magnets by intergranular addition of Dy{sub 82.3}Co{sub 17.7}

In this study, microstructure and magnetic properties of sintered Nd-Fe-B magnets with addition of Dy{sub 82.3}Co{sub 17.7} (wt. %) were investigated. By adding a small amount of Dy{sub 82.3}Co{sub 17.7}, the coercivity is improved greatly, and the irreversible loss is decreased sharply. The increase of Curie temperature suggests that Co atoms have entered into the 2:14:1 main phase. Microstructural analysis indicates that a well-developed core-shell structure was formed in the magnets with the addition of Dy{sub 82.3}Co{sub 17.7}. The improvement of magnetic properties can be attributed to the microstructural modification and the intrinsic properties' improvement.

36 MATERIALS SCIENCE↗

Magnetic properties of Nd-Ga-Fe{sub bal}-Nb-B alloy

Here, we have synthesized Nd-Ga-Fe{sub bal}-Nb-B alloy by strip casting method. The crystalline and magnetic properties of sample were investigated with x-ray diffractometer (XRD), vibrating sample magnetometer (VSM), and Mössbauer spectrometer. The XRD pattern was analyzed with the Rietveld refinement method, indicating a tetragonal structure and the space group of P4{sub 2}/mnm. The temperature dependence of zero-field cooled (ZFC) magnetization curve was measured under applied field at temperature ranging from 4.2 to 740 K. From the ZFC curve, Curie temperature and spin reorientation temperature are determined to be 615 K and 130 K, respectively. Also, Mössbauer spectra were measured at various temperatures ranging from 4.2 to 620 K. Each spectrum was fitted with 6-sextets for Fe site (8j{sub 1}, 8j{sub 2}, 16k{sub 1}, 16k{sub 2}, 4c, and 4e), and magnetic hyperfine field, Isomer shift, electric quadrupole shift, and area ratio values were obtained from the fit. We observed the change in slope of magnetic hyperfine field and electric quadrupole shift at 130 K while the Curie temperature was determined to be 615 K from the measurement of zero velocity counter, agreeing with the values obtained from VSM measurements.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Development and intrinsic properties of hexagonal ferromagnetic (Zr,Ti)Fe{sub 2}

Nanocrystalline Ti{sub 0.75}Zr{sub 0.25}Fe{sub 2+x} (x = 0-0.4) and Ti{sub 0.75−y}B{sub y}Zr{sub 0.25}Fe{sub 2.4} (y = 0-0.35) with high saturation magnetization have been fabricated by the melt-spinning technique. Nanocrystalline Ti{sub 0.75}Zr{sub 0.25}Fe{sub 2+x} consists of the hexagonal C14 Laves phase (Ti,Zr)Fe{sub 2}. Fe addition decreases the lattice parameter a and shrinks the cell volume. The antiferromagnetic Fe-Fe interactions may decrease with the increase of x, leading to a significant enhancement of saturation polarization (J{sub s}) and Curie temperature (T{sub c}). The magnetocrystalline anisotropy constant K also increases with increasing x. Excessive Fe addition (x > 0.25) may induce structural disorder which lowers the J{sub s} and T{sub c}. Nanocrystalline Ti{sub 0.75−y}B{sub y}Zr{sub 0.25}Fe{sub 2.4} is composed of hexagonal (Ti,Zr)Fe{sub 2} and Fe-rich amorphous phases with relatively high J{sub s}. The lattice parameters a, c and cell volume V are almost unchanged with the increase of y for y ≥ 0.16. Simultaneously, the T{sub c} of (Ti,Zr)Fe{sub 2} remains unchanged, indicating that B does not enter this lattice but takes part in forming the amorphous phase, in good agreement with the X-ray diffraction results. The volume fraction of the amorphous phase increases with the increase of B content and results in a large enhancement of J{sub s} up to 10.8 kG. Further B addition (y > 0.30) decreases J{sub s}, possibly due to the decrease of the J{sub s} of the amorphous phase.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Ga content on the structure and anomalous Hall effect of Fe{sub 1−x}Ga{sub x} thin films on GaSb(100)

The Fe{sub 1−x}Ga{sub x} thin films (x = 0.4, 0.5) have been grown on GaSb(100) substrate using molecular beam epitaxy. An epitaxial film with bcc α-Fe crystal structure (A2) is observed in Fe{sub 0.6}Ga{sub 0.4} film, while an impure Fe{sub 3}Ga phase with DO{sub 3} structure is appeared in Fe{sub 0.5}Ga{sub 0.5} film. The saturated magnetizations at room temperature are observed to be 570 emu/cm{sup 3} and 180 emu/cm{sup 3} and the coercivities to be 170 and 364 Oe for Fe{sub 0.6}Ga{sub 0.4} and Fe{sub 0.5}Ga{sub 0.5}, respectively. A hysteresis trend in Hall resistance vs. magnetic field is observed for Fe{sub 0.5}Ga{sub 0.5} film. However, there is a weak hysteresis noticed in Fe{sub 0.4}Ga{sub 0.6} thin film.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetotransport in MgO-based magnetic tunnel junctions grown by molecular beam epitaxy (invited)

The strong impact of molecular beam epitaxy growth and Synchrotron Radiation characterization tools in the understanding of fundamental issues in nanomagnetism and spintronics is illustrated through the example of fully epitaxial MgO-based Magnetic Tunnel Junctions (MTJs). If ab initio calculations predict very high tunnel magnetoresistance (TMR) in such devices, some discrepancy between theory and experiments still exists. The influence of imperfections in real systems has thus to be considered like surface contaminations, structural defects, unexpected electronic states, etc. The influence of possible oxygen contamination at the Fe/MgO(001) interface is thus studied, and is shown to be not so detrimental to TMR as predicted by ab initio calculations. On the contrary, the decrease of dislocations density in the MgO barrier of MTJs using Fe{sub 1−x}V{sub x} electrodes is shown to significantly increase TMR. Finally, unexpected transport properties in Fe{sub 1−X}Co{sub x}/MgO/Fe{sub 1−X}Co{sub x} (001) are presented. With the help of spin and symmetry resolved photoemission and ab initio calculation, the TMR decrease for Co content higher than 25% is shown to come from the existence of an interface state and the shift of the empty Δ1 minority spin state towards the Fermi level.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Thermal spin-transfer torque in magnetic tunnel junctions (invited)

The thermal spin-transfer torque (TSTT) is an effect to switch the magnetic free layer in a magnetic tunnel junction by a temperature gradient only. We present ab initio calculations of the TSTT. In particular, we discuss the influence of magnetic layer composition by considering Fe{sub x}Co{sub 1–x} alloys. Further, we compare the TSTT to the bias voltage driven STT and discuss the requirements for a possible thermal switching. For example, only for very thin barriers of 3 monolayers MgO, a thermal switching is imaginable. However, even for such a thin barrier, the TSTT is still too small for switching at the moment and further optimization is needed. In particular, the TSTT strongly depends on the composition of the ferromagnetic layer. In our current study, it turns out that at the chosen thickness of the ferromagnetic layer, pure Fe gives the highest thermal spin-transfer torque.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of local internal friction in metallic glasses

Atomic force acoustic microscopy (AFAM), an advanced scanning probe microscopy technique, has been used to measure local elastic properties with a spatial resolution given by the tip-sample contact radius. AFAM is based on inducing out-of-plane vibrations in the specimen. The vibrations are sensed by the AFM cantilever from by the photodiode signal when its tip is in contact with the material under test. To measure local damping, the inverse quality factor Q{sup −1} of the resonance curve is usually evaluated. Here, from the contact-resonance spectra obtained, we determine the real and imaginary part of the contact stiffness k* and from these two quantities the local damping factor Q{sub loc}{sup −1} is obtained which is proportional to the imaginary part γ of the contact stiffness. The evaluation of the data is based on the cantilever's mass distribution with damped flexural modes and not on an effective point-mass approximation for the cantilever’s motion. The given equation is simple to use and has been employed to study the local Q{sub loc}{sup −1} of amorphous PdCuSi metallic glass and its crystalline counterpart as a function of position of the AFM tip on the surface. The width of the distribution changes dramatically from the amorphous to the crystalline state as expected from the consequences of the potential-energy landscape picture. The center value of the distribution curve for Q{sub loc}{sup −1} coincides very well with published data, based on global ultrasonic or internal friction measurements. This is compared to Q{sub loc}{sup −1} measured in crystalline SrTiO{sub 3}, which exhibits a narrow distribution, as expected.

36 MATERIALS SCIENCE↗

The alloying element dependence of the local lattice deformation and the elastic properties of Ni{sub 3}Al: A molecular dynamics simulation

Molecular dynamics (MD) together with the modified analytical embedded atom method (MAEAM) is employed to study the alloying elements (Re, Ru, Co, and Ta) dependence of the elastic properties of L1{sub 2}-Ni{sub 3}Al. The investigations indicate that the calculated elastic properties of Ni{sub 3}Al are in reasonable agreement with the previous results. The substituting formation energies of the alloying elements in Ni{sub 3}Al are calculated to determine the site preference. It is found out that Re, Ru, and Ta atoms prefer to occupy the Al sites, and the Co atom prefers to occupy the Ni site. Based on Re, Ru, and Ta substituting the 1st, 2nd, 3rd, and 4th nearest-neighbor atoms, we ascertain that the substituting manners of these alloying elements have a decisive effect on the bulk modulus and the local crystal lattice of Ni{sub 3}Al. Moreover, for Re, the bonding interaction plays a predominant role in the improvement in the bulk modulus of Ni{sub 3}Al, whereas the size effect of Ru and Ta on the improvement in the bulk modulus is more obvious. Finally, the potential reasons of which the alloying elements enhance the bulk modulus are discussed in details.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Modelling current-induced magnetization switching in Heusler alloy Co{sub 2}FeAl-based spin-valve nanopillar

We investigated the current-induced magnetization switching in a Heusler alloy Co{sub 2}FeAl-based spin-valve nanopillar by using micromagnetic simulations. We demonstrated that the elimination of the intermediate state is originally resulted from the decease of effective magnetic anisotropy constant. The magnetization switching can be achieved at a small current density of 1.0 × 10{sup 4} A/cm{sup 2} by increasing the demagnetization factors of x and y axes. Based on our simulation, we found magnetic anisotropy and demagnetization energies have different contributions to the magnetization switching.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magneto-optical Kerr effect in L1{sub 0} FePdPt ternary alloys: Experiments and first-principles calculations

We have studied the magneto-optical Kerr effect (MOKE) of L1{sub 0} Fe{sub 0.5}(Pd{sub 1−x}Pt{sub x}){sub 0.5} alloy films with both experiments and first-principles calculations. In the visible region, negative Kerr rotation and ellipticity peaks are, respectively, observed in the regions of 1.5–2.0 eV and 1.7–2.6 eV. These peaks are shifted towards higher energies, and their magnitudes are enhanced for larger x. The MOKE evolution is mainly ascribed to the anomalous Hall conductivity contributed by the spin-down d{sub ↓,x{sup 2}−y{sup 2}} bands from Pd and Pt. We established a close correlation among the MOKE spectra, the spin orbit coupling strength, and the band feature for this prototypical system.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural behaviour of YGa under high pressure

High pressure X-ray diffraction studies on rare-earth gallide YGa was carried up to a pressure of ∼ 33 GPa using rotating anode x-ray source in an angle dispersive mode. YGa exhibits CrB (B33) type orthorhombic structure (space group Cmcm) at ambient pressure. It undergoes a reversible structural phase transition from orthorhombic to tetragonal structure at ∼ 8.8 GPa. Both the phases coexist up to the highest pressure studied. The zero pressure bulk modulus and its derivative for parent phase have been estimated to be B{sub o} = 60 ± 3 GPa, B{sub o}' = 4.6 ± 1.5.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Electromagnetic properties of NiZn ferrite nanoparticles and their polymer composites

The magnetic properties of polycrystalline NiZn ferrite nanoparticles synthesized using a polyol-reduction and coprecipitation reaction methods have been investigated. The effects on magnetization of synthesis approach, chemical composition, processing conditions, and on the size of nanoparticles on magnetization have been investigated. The measured room-temperature magnetization for the as-prepared magnetic nanoparticles (MNP) synthesized via polyol-reduction and coprecipitation is 69 Am{sup 2} kg{sup −1} and 14 Am{sup 2} kg{sup −1}, respectively. X-ray diffraction measurements confirm spinel structure of the particles with an estimated grain size of ∼80 nm obtained from the polyol-reduction and 28 nm obtained from these coprecipitation techniques. Upon calcination under atmospheric conditions at different temperatures between 800 °C and 1000 °C, the magnetization, M, of the coprecipitated MNP increases to 76 Am{sup 2} kg{sup −1} with an estimated grain size of 90 nm. The MNP-polymer nanocomposites made from the synthesized MNP in various loading fraction and high density polyethylene exhibit interesting electromagnetic properties. The measured permeability and permittivity of the magnetic nanoparticle-polymer nanocomposites increases with the loading fractions of the magnetic nanoparticles, suggesting control for impedance matching for antenna applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Nanostructured Cu-Cr alloy with high strength and electrical conductivity

The influence of nanostructuring by high pressure torsion (HPT) on strength and electrical conductivity in the Cu-Cr alloy has been investigated. Microstructure of HPT samples was studied by transmission electron microscopy with special attention on precipitation of small chromium particles after various treatments. Effect of dynamic precipitation leading to enhancement of strength and electrical conductivity was observed. It is shown that nanostructuring leads to combination of high ultimate tensile strength of 790–840 MPa, enhanced electrical conductivity of 81%–85% IACS and thermal stability up to 500 °C. The contributions of grain refinement and precipitation to enhanced properties of nanostructured alloy are discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Fine structure of Fe-Co-Ga and Fe-Cr-Ga alloys with low Ga content

Investigation of Ga influence on the structure of Fe-Cr and Fe-Co alloys was performed with the use of {sup 57}Fe Mössbauer spectroscopy and X-ray diffraction methods. In the alloys of the Fe-Cr system, doping with Ga handicaps the decomposition of solid solutions, observed in the binary alloys, and increases its stability. In the alloys with Co, Ga also favors the uniformity of solid solutions. The analysis of Mössbauer experiments gives some grounds to conclude that if, owing to liquation, clusterization, or initial stages of phase separation, there exist regions enriched in iron, some amount of Ga atoms prefer to enter the nearest surroundings of iron atoms, thus forming binary Fe-Ga regions (or phases)

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Enhancement of magnetocaloric effect in the Gd 2 Al phase by Co alloying

We observe that Cu clusters grow on surface terraces of graphite as a result of physical vapor deposition in ultrahigh vacuum. We show that the observation is incompatible with a variety of models incorporating homogeneous nucleation and high level calculations of atomic-scale energetics. An alternative explanation, ion-mediated heterogeneous nucleation, is proposed and validated, both with theory and experiment. This serves as a case study in identifying when and whether the simple, common observation of metal clusters on carbon-rich surfaces can be interpreted in terms of homogeneous nucleation. We describe a general approach for making system-specific and laboratory-specific predictions.

36 MATERIALS SCIENCE↗