Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INTERFEROMETRY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1984

Tropospheric Delay Effects in Radio Interferometry

A new tropospheric mapping function is derived which is more accurate than previous mapping functions above elevations of 4 degrees. The error due to the given analytic approximation is estimated to be less than 0.02% for elevation angles larger than 6 degrees, (less than 0.4 cm at 6 degrees, and approximately 0.004% or 0.03 cm at 20 degrees). The mathematical expansion used in the derivation is valid for any laterally homogeneous atmospheric model of refractivity. The new mapping function, computer generated ray tracing tables and other mapping functions are compared. The results can be used in correcting for tropospheric delays of radio signals.

Lanyi, G.↗
NASA NTRS1983

Operational radio interferometry observation network (ORION) mobile VLBI station

The design and current status of the ORION mobile VLBI station is described. The station consists of a five-meter antenna, a receiving and recording system installed in a mobile antenna transporter, and an electronics transporter. The station is designed for field operation by a two-person crew at the rate of two sites per week. The various subsystems are described in detail, including the antenna, housing facilities for electronics and crew, microwave equipment, receiver, data acquisition subsystem, frequency and timing subsystem, phase calibration, monitoring and control, water vapor radiometer, and communications.

Renzetti, N. A.↗
NASA NTRS1983

Radio stars - A possible link between the Hipparcos optical reference frame and an extra-galactic very long baseline interferometry reference frame

The concept of typing the Hipparcos optical and the JPL VLBI frames of reference by means of VLBI measurements of the positions and proper motions of the radio components of some bright stars is considered. The properties of the thermal and non-thermal radio-stars are discussed and 22 candidate stars are selected to achieve this tie. A description is given of the first VLBI attempt to detect these stars on the intercontinental baselines of the Deep Space Network with the Mark II recording system.

Lestrade, J.-F.↗
NASA NTRS1984

Very long baseline interferometry observations of the RS Canum Venaticorum system HR 5110 at 8.4 GHz

The RS CVn binary system HR 5110 was observed with a well-calibrated four-element VLBI array at a frequency of 8.4 GHz. The total flux density, which was nearly constant at 32 + or - 2 mJy, was monitored throughout the experiment with a 20 km baseline interferometer allowing accurate visibilities to be calculated. The observed visibilities are consistent with a source unresolved on all the baselines. The maximum size of the equivalent Gaussian source is 1.4 milli-arcsec (FWHM), corresponding to a linear size of 1.1 x 10 to the 12th cm at 52 pc. This maximum size is comparable with the overall size of the binary system. The inferred lower limit of the brightness temperature is 4 x 10 to the 8th K, which is higher than the coronal temperature of 10 to the 7th K measured in a soft X-ray survey. This is consistent with a nonthermal mechanism for the radiation process of the moderate radio outburst observed.

Mutel, R. L.↗
NASA NTRS1984

Tomography by iterative convolution - Empirical study and application to interferometry

An algorithm for computer tomography has been developed that is applicable to reconstruction from data having incomplete projections because an opaque object blocks some of the probing radiation as it passes through the object field. The algorithm is based on iteration between the object domain and the projection (Radon transform) domain. Reconstructions are computed during each iteration by the well-known convolution method. Although it is demonstrated that this algorithm does not converge, an empirically justified criterion for terminating the iteration when the most accurate estimate has been computed is presented. The algorithm has been studied by using it to reconstruct several different object fields with several different opaque regions. It also has been used to reconstruct aerodynamic density fields from interferometric data recorded in wind tunnel tests.

Vest, C. M.↗
NASA NTRS1984

Radio interferometry from space platforms

While current VLBI observations are limited in their resolution by the earth diameter magnitude, which is the largest antenna separation available, as well as in their information content, because of the small number of antennas in use at a given time, the extension of VLBI to include one or more antennas in space will relieve both constraints and help to map distant radio sources with the highest possible resolution. Attention is given to the implementation of such an orbital VLBI system extension through (1) a Shuttle-launch mission, (2) a six-month to one-year near earth orbit mission based on a space platform associated with the Space Station, (3) a large orbit free flyer platform mission of more than 2-year duration, and (4) lunar and/or deep space orbits, aimed at reaching the resolution limits set by interstellar scattering.

Roberts, D. H.↗
NASA NTRS1984

Tropospheric calibration in radio interferometry

A new tropospheric mapping function is derived which is more accurate than previous mapping functions above elevations of 4 deg. The error due to the given analytic aproximation is estimated to be less than 0.2 percent for elevation angles larger than 6 deg (less than 0.4 cm at 6 deg). The mathematical expansion used in the derivation is valid for any laterally homogeneous atmospheric model of refractivity. The new mapping function, computer-generated ray tracing tables, and other mapping functions are compared.

Lanyi, G.↗
NASA NTRS1987

Application of digital holographic interferometry to pressure measurements of symmetric, supercritical and circulation-control airfoils in transonic flow fields

Six airfoil interferograms were evaluated using a semiautomatic image-processor system which digitizes, segments, and extracts the fringe coordinates along a polygonal line. The resulting fringe order function was converted into density and pressure distributions and a comparison was made with pressure transducer data at the same wind tunnel test conditions. Three airfoil shapes were used in the evaluation to test the capabilities of the image processor with a variety of flows. Symmetric, supercritical, and circulation-control airfoil interferograms provided fringe patterns with shocks, separated flows, and high-pressure regions for evaluation. Regions along the polygon line with very clear fringe patterns yielded results within 1% of transducer measurements, while poorer quality regions, particularly near the leading and trailing edges, yielded results that were not as good.

Torres, Francisco J.↗
NASA NTRS1987

Holographic interferometry at Wright Aeronautical Laboratories

The optical diagnostics requirements and plans for the Aero Propulsion Lab. are described. This laboratory is performing work in combustion as related to aero propulsion systems. They would like to use holography and other types of optical instrumentation for combustion diagnostics and flow visualization. A movie of a laser light sheet flow visualization of a combustor in operation was shown. This movie showed extremely clear examples of vortical and unsteady flow, and it would be of interest to use image analysis to quantify such data.

Roquemore, Mel↗
NASA NTRS1987

Welding arc and plasma studies using real time, multipass holographic interferometry

Flow visualization of the plasma process in a welding arc is being studied with a multipass Argon ion interferometer. High speed movies at 10,000 frames per/sec are taken. The multipass interferometer and several interferograms of the plasma near the electrode of the welding are given. Digitization of the fringes is currently done by hand.

Deason, Vance↗
NASA NTRS1987

A new art code for tomographic interferometry

A new algebraic reconstruction technique (ART) code based on the iterative refinement method of least squares solution for tomographic reconstruction is presented. Accuracy and the convergence of the technique is evaluated through the application of numerically generated interferometric data. It was found that, in general, the accuracy of the results was superior to other reported techniques. The iterative method unconditionally converged to a solution for which the residual was minimum. The effects of increased data were studied. The inversion error was found to be a function of the input data error only. The convergence rate, on the other hand, was affected by all three parameters. Finally, the technique was applied to experimental data, and the results are reported.

Tan, H.↗
NASA NTRS1986

North American-Pacific relative plate motion in southern California from interferometry

VLBI measurements of baselines crossing the San Andreas fault zone in southern California have provided observational constraints on rates of elastic tectonic strain accumulation. The single site located near this fault (the JPL site) moves in a direction concordant with the Pacific plate motion vector but at approximately half the net rate relative to North America. This motion agrees approximately in amount with geologically determined displacement rates on the San Andreas fault alone but not with the local strike of the fault. When considered together with complementary geodetic data, these results suggest a complex relation between the short-term accumulation of elastic strain and its permanent accommodation on existing faults.

Lyzenga, G. A.↗
NASA NTRS1986

Precision of vertical position estimates from very long baseline interferometry

It is found that the precision of VLBI measurements of vertical crustal motions is limited by errors in the modeling of the propagation delay through the earth's neutral atmosphere, and by errors in finding the orientation of a fixed crust coordinate system in the VLBI reference frame. The repeatability of baseline length measurements study indicates a vertical position precision of about 8 cm, averaged over 13 sites and 4.5 years of data, while the repeatability of vertical position estimates for a Richmond, FL site is found to yield a precision of about 7 cm for 42 observations made over an 11-month period. An overall precision of 8 cm for a 24-hour VLBI observing session is obtained, and the effects of earth orientation parameter errors is contingent on the distances between the VLBI sites.

Herring, T. A.↗