Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “H- source”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Searching for the Expelled Hydrogen Envelope in Type I Supernovae via Late-Time H α Emission

We report the first results from our long-term observational survey aimed at discovering late-time interaction between the ejecta of hydrogen-poor Type I supernovae (SNe I) and the hydrogen-rich envelope expelled from the progenitor star several decades/centuries before explosion. The expelled envelope, moving with a velocity of ∼10–100 km s{sup −1}, is expected to be caught up by the fast-moving SN ejecta several years/decades after explosion, depending on the history of the mass-loss process acting in the progenitor star prior to explosion. The collision between the SN ejecta and the circumstellar envelope results in net emission in the Balmer lines, especially H α . We look for signs of late-time H α emission in older SNe Ia/Ibc/IIb with hydrogen-poor ejecta via narrowband imaging. Continuum-subtracted H α emission has been detected for 13 point sources: 9 SN Ibc, 1 SN IIb, and 3 SN Ia events. Thirty-eight SN sites were observed on at least two epochs, from which three objects (SN 1985F, SN 2005kl, and SN 2012fh) showed significant temporal variation in the strength of their H α emission in our Direct Imaging Auxiliary Functions Instrument (DIAFI) data. This suggests that the variable emission is probably not due to nearby H ii regions unassociated with the SN and hence is an important additional hint that ejecta–circumstellar medium interaction may take place in these systems. Moreover, we successfully detected the late-time H α emission from the Type Ib SN 2014C, which was recently discovered as a strongly interacting SN in various (radio, infrared, optical, and X-ray) bands.

79 ASTRONOMY AND ASTROPHYSICS↗

A SURVEY OF MOLECULAR LINES TOWARD MASSIVE CLUMPS IN EARLY EVOLUTIONARY STAGES OF HIGH-MASS STAR FORMATION

We have observed the CH{sub 3}OH J = 2-1, SiO J = 2-1, C{sup 34}S J = 2-1, H{sup 13}CO{sup +} J = 1-0, HN{sup 13}C J = 1-0, CCH N = 1-0, OCS J = 8-7, and SO J{sub N} = 2{sub 2}-1{sub 1} lines toward 20 massive clumps, including Midcourse Space Experiment (MSX) 8 {mu}m dark sources (infrared dark clouds) and MSX 8 {mu}m sources, by using the Nobeyama Radio Observatory 45 m telescope. We have found that the velocity widths of the CH{sub 3}OH and C{sup 34}S lines are broader than those of the H{sup 13}CO{sup +} line in the MSX dark sources. On the other hand, they are comparable to the velocity width of the H{sup 13}CO{sup +} line in the MSX sources. In addition, the [SiO]/[H{sup 13}CO{sup +}] abundance ratio is found to be enhanced in the MSX dark sources in comparison with the MSX sources. These results suggest that shocks caused by interaction between an outflow and an ambient dense gas would have substantial impact on the chemical composition of the MSX dark sources. The velocity widths of the CH{sub 3}OH and C{sup 34}S lines relative to that of the H{sup 13}CO{sup +} line as well as the [SiO]/[H{sup 13}CO{sup +}] abundance ratio could be used as good tools for investigating evolutionary stages of massive clumps. On the basis of the results, we discuss the chemical and physical evolution of massive clumps.

79 ASTRONOMY AND ASTROPHYSICS↗

HOT HIGH-MASS ACCRETION DISK CANDIDATES

To better understand the physical properties of accretion disks in high-mass star formation, we present a study of a dozen high-mass accretion disk candidates observed at high spatial resolution with the Australia Telescope Compact Array (ATCA) in the high-excitation (4,4) and (5,5) lines of NH{sub 3}. All of our originally selected sources were detected in both NH{sub 3} transitions, directly associated with CH{sub 3}OH Class II maser emission and implying that high-excitation NH{sub 3} lines are good tracers of the dense gas components in hot-core-type targets. Only the one source that did not satisfy the initial selection criteria remained undetected. From the 11 mapped sources, six show clear signatures of rotation and/or infall motions. These signatures vary from velocity gradients perpendicular to the outflows, to infall signatures in absorption against ultracompact H II regions, to more spherical infall signatures in emission. Although our spatial resolution is {approx}1000 AU, we do not find clear Keplerian signatures in any of the sources. Furthermore, we also do not find flattened structures. In contrast to this, in several of the sources with rotational signatures, the spatial structure is approximately spherical with sizes exceeding 10{sup 4} AU, showing considerable clumpy sub-structure at even smaller scales. This implies that on average typical Keplerian accretion disks-if they exist as expected-should be confined to regions usually smaller than 1000 AU. It is likely that these disks are fed by the larger-scale rotating envelope structure we observe here. Furthermore, we do detect 1.25 cm continuum emission in most fields of view. While in some cases weak cm continuum emission is associated with our targets, more typically larger-scale H II regions are seen offset more than 10'' from our sources. While these H II regions are unlikely to be directly related to the target regions, this spatial association nevertheless additionally stresses that high-mass star formation rarely proceeds in an isolated fashion but in a clustered mode.

79 ASTRONOMY AND ASTROPHYSICS↗

Crystallization and morphology of mordenite zeolite influenced by various parameters in organic-free synthesis

Research highlights: {yields} Seed, gel composition and silicon source affect the crystallization process of MOR. {yields} Seed, gel composition and silicon source influence the morphology of MOR. {yields} Low silica concentration results in MOR with high c/b aspect ratio. {yields} Novel nano fiber-like MOR with c/b aspect ratio of 89 was organic-free synthesized. {yields} The morphology of MOR influences its mesopore property and thermal stability. -- Abstract: A series of mordenite zeolites with different morphologies were synthesized via a facile organic-free hydrothermal route, and characterized by X-ray diffraction, scanning electron microscopy, X-ray fluorescence spectrometer and N{sub 2} adsorption-desorption techniques. Influences of synthetic parameters, including seed crystal, silicon precursor, SiO{sub 2}/Al{sub 2}O{sub 3}, Na{sub 2}O/SiO{sub 2} and H{sub 2}O/SiO{sub 2}, on mordenite crystallization were investigated systematically. It was found that mordenite zeolites with various morphologies, such as fiber-like, rod-like, prism-like and needle-like ones could be synthesized in control. Especially, novel nano fiber-like MOR crystals with high c/b aspect ratio were prepared from low silica concentration system, which was manipulated by using small initial SiO{sub 2}/Al{sub 2}O{sub 3} ratio, large H{sub 2}O/SiO{sub 2} and silicon source with slow dissolution rate. Moreover, mordenite samples with various morphologies exhibited different mesopore property and thermal stability.

36 MATERIALS SCIENCE↗

Preliminary results from the Alcator C-Mod polarimeter

A poloidally viewing far infrared polarimeter diagnostic is being developed for the Alcator C-Mod tokamak, and will be used to determine the q-profile and to study density and magnetic field fluctuations. A three-chord version of what will eventually be up to a ten-chord system has been designed and fabricated and will be installed on C-Mod before the end of the current run period. Bench tests of a single chord mock-up of this system show acceptable noise levels for the planned measurements. We will discuss the analysis and experimental techniques used to diagnose and reduce noise sources.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Note: Design and initial results of a multi-pulsed intense electron beam source

A multi-pulsed intense electron beam source is introduced, including the design and the initial experimental results. The source can generate a burst of three pulses of intense electron beams with energy of 2–3 MeV and beam intensities of around 2.5 kA. An inductive adder is chosen to generate the pulsed diode voltages and a dispenser cathode is chosen to emit electron beams. The test results indicate that the design of the source is reliable. The multi-pulsed diode voltage is up to 2.5 MV and the beam intensities are more than 2 kA at the exit of the source with small variation.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

GALAXY STELLAR MASS ASSEMBLY BETWEEN 0.2 < z < 2 FROM THE S-COSMOS SURVEY

We follow the galaxy stellar mass assembly by morphological and spectral type in the COSMOS 2 deg{sup 2} field. We derive the stellar mass functions and stellar mass densities from z = 2 to z = 0.2 using 196,000 galaxies selected at F{sub 3.6{mu}m} > 1 muJy with accurate photometric redshifts ({sigma}{sub (z{sub phot}-z{sub spec})/(1+z{sub spec})}=0.008 at i {sup +} < 22.5). Using a spectral classification, we find that z {approx} 1 is an epoch of transition in the stellar mass assembly of quiescent galaxies. Their stellar mass density increases by 1.1 dex between z = 1.5-2 and z = 0.8-1 ({Delta}t {approx} 2.5 Gyr), but only by 0.3 dex between z = 0.8-1 and z {approx} 0.1 ({Delta}t {approx} 6 Gyr). Then, we add the morphological information and find that 80%-90% of the massive quiescent galaxies (log M {approx} 11) have an elliptical morphology at z < 0.8. Therefore, a dominant mechanism links the shutdown of star formation and the acquisition of an elliptical morphology in massive galaxies. Still, a significant fraction of quiescent galaxies present a Spi/Irr morphology at low mass (40%-60% at log M approx 9.5), but this fraction is smaller than predicted by semi-analytical models using a 'halo quenching' recipe. We also analyze the evolution of star-forming galaxies and split them into 'intermediate activity' and 'high activity' galaxies. We find that the most massive 'high activity' galaxies end their high star formation rate phase first. Finally, the space density of massive star-forming galaxies becomes lower than the space density of massive elliptical galaxies at z < 1. As a consequence, the rate of 'wet mergers' involved in the formation of the most massive ellipticals must decline very rapidly at z < 1, which could explain the observed slow down in the assembly of these quiescent and massive sources.

79 ASTRONOMY AND ASTROPHYSICS↗

THE OPTICAL MICROVARIABILITY AND SPECTRAL CHANGES OF THE BL LACERTAE OBJECT S5 0716+714

We monitored the BL Lac object S5 0716+714 in the optical band during 2008 October and December and 2009 February with a best temporal resolution of about 5 minutes in the BVRI bands. Four fast flares were observed with amplitudes ranging from 0.3 to 0.75 mag. The source remained active during the whole monitoring campaign, showing microvariability in all days except for one. The overall variability amplitudes are {delta}B {approx} 0fm89, {delta}V {approx} 0fm80, {delta}R {approx} 0fm73, and {delta}I{approx} 0fm51. Typical timescales of microvariability range from 2 to 8 hr. The overall V - R color index ranges from 0.37 to 0.59. Strong bluer-when-brighter chromatism was found on internight timescales. However, a different spectral behavior was found on intranight timescales. A possible time lag of {approx}11 minutes between B and I bands was found on one night. The shock-in-jet model and geometric effects can be applied to explain the source's intranight behavior.

79 ASTRONOMY AND ASTROPHYSICS↗

LaRIS: Targeting Portability and Productivity for LAPACK Codes on Extreme Heterogeneous Systems by Using IRIS

In keeping with the trend of heterogeneity in high-performance computing, hardware manufacturers and vendors are developing new architectures and associated software stacks (e.g., libraries) to harness the best possible performance from commonly used kernels (e.g., linear algebra kernels). However, kernels tuned for one architecture are not portable to others. Moreover, the coexistence of different architectures in a single node makes orchestration difficult. To address these challenges, we introduce LaRIS, a portable framework for LAPACK functionalities. LaRIS ensures a separation between linear algebra algorithms and vendor-library kernels by using the IRIS run time and IRIS-BLAS library. Such abstraction at the algorithm level makes the implementation completely agnostic to the vendor library and architecture. LaRIS uses the IRIS run time to dynamically select the vendor-library kernel and suitable processor architecture at run time. Through LU factorization, we demonstrate that LaRIS can fully utilize different heterogeneous systems by launching and orchestrating different vendor-library kernels without any change in the source code.

Monil, M. A. H.↗

Desorption characteristics of selenium and tellurium thin films

The temperature-dependent desorption behavior of selenium and tellurium is investigated using a heated quartz crystal microbalance. Prior to heating the quartz crystal microbalance, selenium and tellurium films with varying thickness were deposited using thermal effusion cells in a molecular beam epitaxy system for subsequent determination of temperature-dependent mass loss of the deposited films. The desorption rate for tellurium was found to exhibit one sharp peak around 190°C, indicating the loss of the entire film irrespective of film thickness within a temperature window of 20°C, which was completely evaporated at 200°C. Similar experiments for selenium revealed that the thermal desorption took place via a two-stage process with a smaller portion of the material desorbing within an even narrower temperature window of 5°C at a much lower peak temperature of 65°C, while most selenium desorbed within a temperature range of 10°C around 90°C. This two-stage behavior indicated the presence of at least two chemically distinct selenium species or binding states. The direct and quantitative determination of the chalcogen desorption process provides important insights into the kinetics of chalcogenide-based film growth and is in addition of applied benefit to the research community in the area of Se/Te capping and decapping of air sensitive materials as it provides temperature ranges and rates at which full desorption is achieved. Our work furthermore points toward the need for a more detailed understanding of the chemical composition state of atomic and molecular beams supplied from thermal evaporation sources during growth.

36 MATERIALS SCIENCE↗

High-resolution TEM study of jimthompsonite, chesterite, and chain-width disorder in Archean ultramafic rocks from Isua, West Greenland

This paper reported transmission electron microscopy observations of alteration products of an ultramafic rock from Isua, Greenland. Ca-Mg-carbonate mineral of dolomite is considered as a stable sink for carbon dioxide injected into potential ultramafic rocks. The structural relationship between dolomite and its host Ca-Mg-silicate minerals was observed. Ca-Mg-silicate minerals of pyroxene and amphibole may provide Ca-Mg source and nucleation site.

58 GEOSCIENCES↗

Studies on the Effects of High Renewable Penetrations on Driving Point Impedance and Voltage Regulator Performance: National Renewable Energy Laboratory/Sacramento Municipal Utility District Load Tap Changer Driving Point Impedance Project

Voltage regulators perform as desired when regulating from the source to the load and when regulating from a strong source (utility) to a weak source (distributed generation). (See the glossary for definitions of a strong source and weak source.) Even when the control is provisioned for reverse operation, it has been observed that tap-changing voltage regulators do not perform as desired in reverse when attempting regulation from the weak source to the strong source. The region of performance that is not as well understood is the regulation between sources that are approaching equal strength. As part of this study, we explored all three scenarios: regulator control from a strong source to a weak source (classic case), control from a weak source to a strong source (during reverse power flow), and control between equivalent sources.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Carbon nanotube substrates and catalyzed hot stamp for polishing and patterning the substrates

The present invention is generally directed to catalyzed hot stamp methods for polishing and/or patterning carbon nanotube-containing substrates. In some embodiments, the substrate, as a carbon nanotube fiber end, is brought into contact with a hot stamp (typically at 200-800.degree. C.), and is kept in contact with the hot stamp until the morphology/patterns on the hot stamp have been transferred to the substrate. In some embodiments, the hot stamp is made of material comprising one or more transition metals (Fe, Ni, Co, Pt, Ag, Au, etc.), which can catalyze the etching reaction of carbon with H.sub.2, CO.sub.2, H.sub.2O, and/or O.sub.2. Such methods can (1) polish the carbon nanotube-containing substrate with a microscopically smooth finish, and/or (2) transfer pre-defined patterns from the hot stamp to the substrate. Such polished or patterned carbon nanotube substrates can find application as carbon nanotube electrodes, field emitters, and field emitter arrays for displays and electron sources.

36 MATERIALS SCIENCE↗

Dual stable isotopes of CH 4 from Yellowstone hot-springs suggest hydrothermal processes involving magmatic CO 2

Volcanism and post-magmatism contribute both significant annual CH 4 fluxes to the atmosphere (on par with other natural sources such as forest fire and wild animal emissions) and have been implicated in past climate-change events. The Yellowstone hot spot is one of the largest volcanic systems on Earth and is known to emit methane in addition to other greenhouse gases (e.g. carbon dioxide) but the ultimate source of this methane flux has not been elucidated. Here we use dual stable isotope analysis (δ 2 H and δ 13 C) of CH 4 (g) sampled from ten high-temperature geothermal pools in Yellowstone National Park to show that the predominant flux of CH4(g) is abiotic. The average δ 13 C and δ 2 H values of CH 4 (g) emitted from hot springs (-26.7 (±2.4) and -236.9 (±12.0) ‰, respectively) are not consistent with biotic (microbial or thermogenic) methane sources, but are within previously reported ranges for abiotic methane production. Correlation between δ 13 C CH4 and δ 13 C-dissolved inorganic C (DIC) also suggests that CO 2 is a parent C source for the observed CH 4 (g). Moreover, CH 4 -CO 2 isotopic geothermometry was used to estimate CH 4 (g) formation temperatures ranging from ~ 250 - 350°C, which is just below the temperature estimated for the hydrothermal reservoir and consistent with the hypothesis that subsurface, rock-water interactions are responsible for large methane fluxes from this volcanic system. An understanding of conditions leading to the abiotic production of methane and associated isotopic signatures are central to understanding the evolutionary history of deep carbon sources on Earth.

58 GEOSCIENCES↗

Development of a reactor with carbon catalysts for modular-scale, low-cost electrochemical generation of H 2 O 2

The development of small-scale, decentralized reactors for H 2 O 2 production that can couple to renewable energy sources would be of great benefit, particularly for water purification in the developing world. Herein, we describe our efforts to develop electrochemical reactors for H 2 O 2 generation with high Faradaic efficiencies of >90%, requiring cell voltages of only ~1.6 V. The reactor employs a carbon-based catalyst that demonstrates excellent performance for H 2 O 2 production under alkaline conditions, as demonstrated by fundamental studies involving rotating-ring disk electrode methods. Finally, the low-cost, membrane-free reactor design represents a step towards a continuous, modular-scale, de-centralized production of H 2 O 2 .

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Time-resolved momentum imaging of UV photodynamics in structural isomers of iodopropane probed by site-selective XUV ionization

The photodynamics of 1- and 2-iodopropane (1 and 2-IP) were studied in a time-resolved scheme incorporating ultraviolet (UV) excitation and extreme ultraviolet (XUV) probing, which initiates photoionization selectively from the I 4d core orbital. UV absorption in the A-band of both isomers leads to prompt C–I bond fission, with significant disposal of internal energy into the propyl radical product. Site-selective ionization enables a range of charge transfer (CT) processes between the nascent highly charged iodine ions and neutral propyl radicals, dependent on the interfragment distance at the instant of ionization. Subtle differences in the dynamics of these CT processes between the two isomers are observed. In 1-IP, the kinetic energies of iodine ions produced by UV photodissociation and subsequent XUV multiple ionization increased notably over the first few hundred femtoseconds, which could be understood in terms of differing gradients along the photodissociation coordinates of the neutral and polycationic states involved in the pump and probe steps, respectively. Led by a recent report of HI elimination in UV photoexcited 2-IP [Todt et al., Phys. Chem. Chem. Phys., 22(46), 27338 (2020)], we also model the most likely signatures of this process in the present experiment, and can identify signal in the 2-IP data (that is absent or significantly weaker in the data from the unbranched 1-IP isomer) that is consistent with such a process occurring on ultrafast timescales.

Allum, Felix [Deutsches Elektronen-Synchrotron (DE↗

Plasma studies of the permanent magnet electron cyclotron resonance ion source at Peking University

At Peking University (PKU) we have developed several 2.45 GHz Permanent Magnet Electron Cyclotron Resonance ion sources for PKUNIFTY, SFRFQ, Coupled RFQ and SFRFQ, and Dielectric-Wall Accelerator (DWA) projects (respectively, 50 mA of D{sup +}, 10 mA of O{sup +}, 10 mA of He{sup +}, and 50 mA of H{sup +}). In order to improve performance of these ion sources, it is necessary to better understand the principal factors that influence the plasma density and the atomic ion fraction. Theoretical analysis about microwave transmission and cut-off inside the discharge chamber were carried out to study the influence of the discharge chamber diameters. As a consequence, experimental studies on plasma density and ion fraction with different discharge chamber sizes have been carried out. Due to the difficulties in measuring plasma density inside the discharge chamber, the output beam current was measured to reflect the plasma density. Experimental results show that the plasma density increases to the maximum and then decreases significantly as the diameter changed from 64 mm to 30 mm, and the atomic ion fraction has the same tendency. The maximum beam intensity was obtained with the diameter of 35 mm, but the maximum atomic ion fraction with a diameter of 40 mm. The experimental results are basically accordant with the theoretical calculation. Details are presented in this paper.

43 PARTICLE ACCELERATORS↗

An explanation for laser-induced spallation effect in a-C:H films: Altered phase evolution route caused by hydrogen doping

The laser-induced spalling effect has been recognized as a unique phenomenon for amorphous carbon (a-C) films during laser processing. In this work, the origin of spalling effect was investigated by ablating two different types of a-C film: hydrogenated a-C (a-C:H) and nonhydrogenated a-C with an Nd-yttrium aluminum garnet laser system. Comparisons of ablating results demonstrated that the spalling effect only occurred in a-C:H rather than nonhydrogenated a-C. Laser heating simulation indicated that the temperature distributions in both films after laser pulse are similar with a high temperature gradient in depth direction. Annealing test results, Raman spectra and nanoindentation show that with the increase in annealing temperature, a-C film transforms into grassy carbon directly, while a-C:H experiences two subprocess under heating: the hydrogen mobilization and rearrangement of C-C network at a relatively low temperature range resulting in a denser C-C network and raised film density; the graphitization at high temperature which would lower the film density. We propose that the reason of laser-induced spalling effect in a-C:H might depend on two aspects: (1) the heat source like laser pulse which could produce a high temperature gradient in depth direction within ultrashort time and (2) the unique evolution process of film microstructure under heating. Based on above model, the spalling effect is ascribed to the concentrated stress caused by different structure evolution subprocess at different depth in a-C:H during the laser irradiation. It is remarkable that the conclusions deduced from our model are proven to be in good agreement with our experimental results and the previous articles reported by others.

36 MATERIALS SCIENCE↗