Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Flux Measurement”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Cosmic Diffuse Analysis

The final analysis of the COMPTEL cosmic diffuse flux analysis is summarized in the accompanying figure. It shows the intensity of the cosmic diffuse flux spectrum measured jointly between the Virgo region and the South Galactic pole. This spectrum represents flux per unit solid angle over the range of 0.8 to 30 MeV. It contains the first positive measurement of the flux above 10 MeV. The spectrum merges smoothly with that measured with the EGRET instrument, starting at 30 MeV. It also merges smoothly with the latest results of the HEAO-1 measurements. However, the spectrum below is softer than the spectrum above the COMPTEL energy band. In the COMPTEL energy band there must exist a change in spectral shape as the source objects or processes change from the lower energy regime to the higher energy regime. The details of the analysis and the implications and meanings of the results are spelled out in the thesis of Dr. Cheenu Kappadath which is enclosed.

Ryan, James M.↗

Energy deposition and middle atmosphere electrodynamic response to a highly relativistic electron precipitation event

Rocket data have been used to evaluate the characteristics of precipitating relativistic electrons and their effects on the electrodynamic structure of the middle atmosphere. These data were obtained at Poker Flat, Alaska, on May 13 and 14, 1990, during a midday, highly relativistic electron (HRE) precipitation event. Solid state detectors were used to measure the electron fluxes and their energy spectra. An X ray scintillator was included on each flight to measure bremsstrahlung X rays produced by energetic electrons impacting on the upper atmosphere. However, these were found the be of negligible importance for this particular event. The energy deposition by the electrons has been determined from the flux measurements and compared with in situ measurements of the atmospheric electrical response. The electrodynamic measurements were obtained by the same rockets and additionally on May 13, with an accompanying rocket. The impact flux was highly irregular, containing short-lived bursts of relativistic electrons, mainly with energies below 0.5 MeV and with fluxes most enhanced between pitch angles of 0 deg - 20 deg. Although the geostationary counterpart of this measured event was considered to be of relatively low intensity and hardness, energy deposition peaked near 75 km with fluxes approaching an ion pair production rate in excess of 100/cu cm s. This exceeds peak fluxes in relativistic electron precipitation (REP) events as observed by us in numerous rocket soundings since 1976. Conductivity measurements from a blunt probe showed that negative electrical conductivities exceeded positive conductivities down to 50 km or lower, consistent with steady ionization by precipitating electrons above 1 MeV. These findings imply that the electrons from the outer radiation zone can modulate the electrical properties of the middle atmosphere to altitudes below 50 km. During the decline and activity minimum of the current solar cycle, we anticipate the occurence of similar events but with fluxes 1-2 orders of magnitude above that reported here, based on studies of earlier solar cycles (e.g., Baker et al., 1993).

Goldberg, R. A.↗

Estimation of surface heat and moisture fluxes over a prairie grassland. I - In situ energy budget measurements incorporating a cooled mirror dew point hygrometer

Attention is focused on in situ measurements taken during FIFE required to support the development and validation of a biosphere model. Seasonal time series of surface flux measurements obtained from two surface radiation and energy budget stations utilized to support the FIFE surface flux measurement subprogram are examined. Data collection and processing procedures are discussed along with the measurement analysis for the complete 1987 test period.

Smith, Eric A.↗

Uncertainties in hot-wire measurements of compressible turbulent flows implied by comparisons with laser-induced fluorescence

A hot-wire anemometer and a new nonintrusive laser-induced fluorescence (LIF) technique are used to survey a Mach 2 turbulent boundary layer. The hot-wire anemometer's ability to accurately measure mass flux, temperature, and density fluctuations in a compressible flow is examined by comparing its results with those obtained using LIF. Several methods of hot-wire calibration are used, and the uncertainties in their measurements of various fluctuating flow parameters are determined. The results show that although a hot-wire operated at high overheat can measure mass flux fluctuations, temperature and density fluctuations are not determined accurately from such measurements. However, a hot-wire operated at multiple overheats can be used to measure static and total temperature fluctuations. The presence of pressure fluctuations and their correlation with density can prevent the use of hot-wire data to determine density fluctuations.

Mckenzie, R. L.↗

Estimation of the solar Lyman alpha flux from ground based measurements of the Ca II K line

Measurements of the solar Lyman alpha and Ca II K from October 1981 to April 1989 show a strong correlation (r = 0.95) that allows estimation of the Lyman alpha flux at 1 AU from 1975 to December 1989. The estimated Lyman alpha strength of 3.9 x 10 to the 11th + or - 0.15 x 10 to the 11th photons/s sq cm on December 7, 1989 is at the same maximum levels seen in Cycle 21. Relative to other UV surrogates (sunspot number, 10.7 cm radio flux, and He I 10830 line strength), Lyman alpha estimates computed from the K line track the SME measurements well from solar maximum, through solar minimum, and into Cycle 22.

Rottman, G. J.↗

Results and interpretation of measurements of the light flux in the near-surface layer of the Venusian atmosphere

The characteristics of the field of radiation in the near surface layer of the atmosphere and on the surface of Venus are reported. Optical measurements made during the landing of the descent vehicles are described. The relief of the surface and the amount of dust on it are examined. The spectral relationship of the albedo of the soil and the light flux incident on the surface is discussed.

Golovin, Y. M.↗

JWST lensed quasar dark matter survey – II. Strongest gravitational lensing limit on the dark matter free streaming length to date

This is the second in a series of papers in which we use JWST Mid Infrared Instrument multiband imaging to measure the warm dust emission in a sample of 31 multiply imaged quasars, to be used as a probe of the particle nature of dark matter. We present measurements of the relative magnifications of the strongly lensed warm dust emission in a sample of nine systems. The warm dust region is compact and sensitive to perturbations by populations of haloes down to masses $\sim 10^6$ M$_{\odot }$. Using these warm dust flux-ratio measurements in combination with five previous narrow-line flux-ratio measurements, we constrain the halo mass function. In our model, we allow for complex deflector macromodels with flexible third- and fourth-order multipole deviations from ellipticity, and we introduce an improved model of the tidal evolution of subhaloes. We constrain a WDM model and find an upper limit on the half-mode mass of $10^{7.6}\, {\rm M}_\odot$ at posterior odds of 10:1. This corresponds to a lower limit on a thermally produced dark matter particle mass of 6.1 keV. This is the strongest gravitational lensing constraint to date, and comparable to those from independent probes such as the Ly $\alpha$ forest and Milky Way satellite galaxies.

dark matter↗

Vertical velocities and momentum fluxes derived from wind measurements in the dusk auroral oval

Results are presented on a chemical release experiment carried out on March 20, 1985 in connection with NASA's Cooperative Observations of Polar Electrodynamics I campaign. Simultaneous neutral wind measurements in E region were carried out at three separate locations over a triangular region with sides of about 150 km in the dusk auroral oval, and the three wind profiles were used to calculate values of divergence and vorticity over the area. The vertical velocity over the hight range was calculated using the mass continuity equation, and the instantaneous vertical momentum fluxes in the E region were derived using the combination of horizontal-wind measurements and calculated vertical velocities. Results show that there is strong coupling between layers in the E region and that the momentum-flux-induced accelerations are at least comparable in magnitude to the pressure gradient and Coriolis force accelerations.

Larsen, M. F.↗

Performance of scene dependent angular models in deriving top-of-atmosphere radiative fluxes from satellite radiance measurements

The ERB experiment algorithm is applied to the Nimbus-7 scanner data for June 1979 to analyze the performance of scene-dependent angular models. The ERBE-derived albedo and LW flux are compared to results from the sorting-into-angular-bins (SAB) method described by Arking and Vemury (1984) and the ERB Matrix algorithm described by Jacobowitz et al. (1984). Results are given for the variation of ERBE-derived flux with viewing zenith angle. Comparing results derived from the ERBE algorithm and from the SAB method, zonal mean differences for the month were less than 0.01 for albedo and 2 W/ sq m for longwave flux. When compared to the ERB matrix algorithm, the ERBE algorithm gives less dependence on viewing zenith angle for SW fluxes, but more for LW fluxes. Cloud results from the ERBE method using broadband Nimbus-7 ERB radiances are compared with the new cloud ERB data results of Stowe et al. (1988). Agreement typically within 0.10 was found.

Suttles, John T.↗

Particle-laden weakly swirling free jets: Measurements and predictions

A theoretical and experimental investigation of particle-laden, weakly swirling, turbulent free jets was conducted. Glass particles, having a Sauter mean diameter of 39 microns, with a standard deviation of 15 microns, were used. A single loading ratio (the mass flow rate of particles per unit mass flow rate of air) of 0.2 was used in the experiments. Measurements are reported for three swirl numbers, ranging from 0 to 0.33. The measurements included mean and fluctuating velocities of both phases, and particle mass flux distributions. Measurements were also completed for single-phase non-swirling and swirling jets, as baselines. Measurements were compared with predictions from three types of multiphase flow analysis, as follows: (1) locally homogeneous flow (LHF) where slip between the phases was neglected; (2) deterministic separated flow (DSF), where slip was considered but effects of turbulence/particle interactions were neglected; and (3) stochastic separated flow (SSF), where effects of both interphase slip and turbulence/particle interactions were considered using random sampling for turbulence properties in conjunction with random-walk computations for particle motion. Single-phase weakly swirling jets were considered first. Predictions using a standard k-epsilon turbulence model, as well as two versions modified to account for effects of streamline curvature, were compared with measurements. Predictions using a streamline curvature modification based on the flux Richardson number gave better agreement with measurements for the single-phase swirling jets than the standard k-epsilon model. For the particle-laden jets, the LHF and DSF models did not provide very satisfactory predictions. The LHF model generally overestimated the rate of decay of particle mean axial and angular velocities with streamwise distance, and predicted particle mass fluxes also showed poor agreement with measurements, due to the assumption of no-slip between phases. The DSF model also performed quite poorly for predictions of particle mass flux because turbulent dispersion of the particles was neglected. The SSF model, which accounts for both particle inertia and turbulent dispersion of the particles, yielded reasonably good predictions throughout the flow field for the particle-laden jets.

Bulzan, Daniel L.↗

Acoustic characteristics of a high-subsonic jet

Acoustic characteristics of high subsonic model cold jet using imaging technique and measurements of energy flux of flow, calculating energy flux from flowfield measurements

Maestrello, L.↗

Measurement of high-temperature thermal conductivity of Lucalox /Al2O3/ using a heat pipe technique.

The thermal conductivity of Lucalox, a high-purity form of aluminum oxide, has been measured over the temperature range from 870 to 1400 C. The technique employed is a novel one using a lithium-filled heat pipe in series with a gas-gap variable-heat-conductance unit as a heat source. The procedure makes it possible to measure heat flux through the sample directly. The measurements indicate that the thermal conductivity of high-purity aluminum oxide has a minimum value of about 0.05 W/cm deg C at 950 C and increases with higher temperatures to values in the range of 0.3 W/cm deg C at 1400 C.

Forman, R.↗

Gas-Temperature Measurement With Minimal Perturbation

Method for measuring temperature of hot turbulent gases uses three heatflux calorimeters. One calorimeter measures radiative heat flux, while other two measure total heat flux (convective and radiative), at two different temperatures. Adapted for commercial uses in such operations as monitoring temperatures of flue gases, piped liquid or gaseous products, internal-combustion or jet engine exhausts.

Fu, T. S.↗

Carbon dioxide fluxes over a raised open bog at the Kinosheo Lake tower site during the Northern Wetlands Study (NOWES)

Measurements of carbon dioxide concentration and flux were made above a raised open bog at Lake Kinosheo in the southern Hudson Bay lowlands during the Northern Wetlands Study (NOWES) experiment in 1990. The flux measurements were made using micrometeorological techniques. They provide the first nondisturbing, larger-scale CO2 flux measurements for this ecosystem and are the first to integrate the exchange over the whole 24 hours of the day. Continuous concentration measurements by infrared gas analyzers (IRGA) and spot flask samples were taken over the period July 1 to July 29. Afternoon CO2 values were only 5 to 7 parts per million by volume (ppmv) lower than measurements over the same period at Canadian background monitoring stations. This suggested that there was little draw-down by local photosynthetic sinks. CO2 fluxes were measured at 8 and 18 m by Bowen ratio and eddy correlation methods, respectively. The methods produced comparable results on averaged data but often diverged considerably on individual half-hour results. Fluxes were small. Daytime values averaged to -0.068 mg/sq m/s by eddy correlation and -0.077 mg/sq m/s by Bowen ratio over the period June 25 to July 28 (negative denotes downward flux), while at night, flux densities were +0.062 mg/sq m/s and +0.085 mg/sq m/s. Integration of the mean diurnal curve gave a net flux of -1.7 g/sq m/d. Comparable data for this type of ecosystem were not found. However, Coyne and Kelley (1975), measuring near Barrow, Alaska, over wet meadow tundra dominated by sedges and grasses, found net fluxes of -7.2 g/sq m/d. Typical net CO2 fluxes from other active temperature ecosystems have been found to be -10 to -20 g/sq m/d (Monteith, 1976). Mean half hourly fluxes were almost constant at +0.06 mg/sq m/s through the nighttime hours. About one half-hour after sunrise the flux reversed direction. Uptake peaked about 0900 eastern daylight time (EDT) and then gradually declined but remained downward until near sunset. The early peak was interpreted to signify that the many plants in the bog experienced water stress during the day as evaporative demand increased and nighttime dew was evaporated.

Neumann, H. H.↗

Aerosol Climate Effects: Local Radiative Forcing and Column Closure Experiments

In an effort to reduce uncertainties in climate change predictions, experiments are being planned and conducted to measure anthropogenic aerosol properties and effects, including effects on radiative fields. The global average, direct anthropogenic aerosol effect on upwelling shortwave fluxes is estimated to be about +1/2 W/sq m, whereas errors in flux changes measured with airborne and spaceborne radiometers are 2 to 8 W/sq m or larger. This poses the question of whether flux changes expected in field experiments will be large enough to measure accurately. This paper obtains a new expression for the aerosol-induced change in upwelling flux, compares it to two-stream and adding-doubling (AD) results, and uses all three methods to estimate expected flux changes. The new expression accounts for the solar zenith angle dependences of aerosol transmission and reflection, as well as of surface albedo, all of which can have a strong effect in determining flux changes measured in field experiments. Despite its relative simplicity, the new expression gives results similar to previous two-stream results. Relative to AD results, it agrees within a few watts per square meter for the intermediate solar elevation angles where the flux changes peak (roughly 10 to 30 degrees), but it has negative errors for higher Sun and positive errors for lower Sun. All three techniques yield aerosol-induced changes in upwelling flux of +8 to +50 W/sq m for aerosol midvisible optical depths of 0.1 to 0.5. Because such aerosol optical depths occur frequently off the U.S. and European Atlantic coasts in summer, the flux changes they induce should be measurable by airborne, and possibly by spaceborne, radiometers, provided sufficient care is taken in experiment design (including measurements to separate aerosol radiative effects from those of absorbing gases). The expected flux changes are about 15 to 100 times larger than the global average flux change expected for the global average anthropogenic sulfate optical depth of 0.04. Reasons for the larger flux changes include the larger optical depths considered here (factor 2.5 to 12), plus restricting the measurements to cloud-free, daytime conditions over the ocean (factor 5 to 9).

Russell, P. B.↗

On the constancy of solar particle fluxes from track, thermoluminescence and solar wind measurements in lunar rocks

Evidence contained within lunar rocks concerning possible variations in solar activity over the last 1 to 2 million years is reviewed. The effects of solar wind particles, which are implanted at shallow depths, solar flare protons, which produce thermoluminescence as well as stable and radionuclides, and solar flare heavy nuclei, which produce tracks, are considered, and the quality and limitations of nuclear tracks measurements as indicators of solar flare flux histories are discussed. Methods used for the determination of the solar flare track production rate, which must be known in order to measure lunar rock surface exposure times, are compared, and it is concluded that most of the evidence favors the rate obtained by Blanford et al. (1975). Information on the constancy of the solar flare particle flux obtained by comparison of the effects of different surface phenomena with solar particle effects is then illustrated for the cases of comparisons between solar flare tracks and microcrater densities, solar flare particle fluxes measured over different periods, and comparisons of the solar flare track production rate with the solar wind flux and microcratering rate. It is noted that these studies provide no evidence for a change in solar particle flux by more than a factor of two over the last 10,000 to 1 million years, or for a change in the solar flare Fe/H ratio in the last 2 million years.

Zinner, E.↗

Two-axis flux gate magnetometer

Magnetometer uses single sensing head to measure magnetic flux density along two axes simultaneously. The sensor head consists of permalloy core and four windings. Two windings perform a multivibrator function, the two remaining windings sense magnetic fields. The smaller magnetometer performs same functions as more complex devices.

Acuna, M. H.↗