Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Finite Element Modelling”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Request for Information FEARCE: An extensible finite element multiphysics software suite for complex and reactive modeling

FEARCE is a modular multiphysics software package configured as a suite of fully-integrated tools that leverages custom templates and models alongside finite element analysis and computational fluid dynamics. FEARCE produces fast, high-fidelity solutions for any aspiring designer needing to model and predict turbulent, reactive, and otherwise complex fluid flows.

97 MATHEMATICS AND COMPUTING↗

An HPC-Based Hydrothermal Finite Element Simulator for Modeling Underground Response to Community-Scale Geothermal Energy Production

Geothermal heat, as renewable energy, shows great advantage with respect to its environmental impact due to its significantly lower CO2 emissions than conventional fossil fuel. Open and closed-loop geothermal heat pumps, which utilize shallow geothermal systems, are an efficient technology for cooling and heating buildings, especially in urban areas. Integrated use of geothermal energy technologies for district heating, cooling, and thermal energy storage can be applied to optimize the subsurface for communities to provide them with multiple sustainable energy and community resilience benefits. The utilization of the subsurface resources may lead to a variation in the underground environment, which might further impact local environmental conditions. However, very few simulators can handle such a highly complex set of coupled computations on a regional or city scale. We have developed high-performance computing (HPC) based hydrothermal finite element (FE) simulator that can simulate the subsurface and its hydrothermal conditions at a scale of tens of km. The HPC simulator enables us to investigate the subsurface thermal and hydrologic response to the built underground environment (such as basements and subways) at the community scale. In this study, a coupled hydrothermal simulator is developed based on the open-source finite element library deal.II. The HPC simulator was validated by comparing the results of a benchmark case study against COMSOL Multiphysics, in which Aquifer Thermal Energy Storage (ATES) is modeled and a process of heat injection into ATES is simulated. The use of an energy pile system at the Treasure Island redevelopment site (San Francisco, CA, USA) was selected as a case study to demonstrate the HPC capability of the developed simulator. The simulator is capable of modeling multiple city-scale geothermal scenarios in a reasonable amount of time.

Sun, Xiang↗

Performance of a parallel algebraic multilevel preconditioner for stabilized finite element semiconductor device modeling

In this study results are presented for the large-scale parallel performance of an algebraic multilevel preconditioner for solution of the drift-diffusion model for semiconductor devices. The preconditioner is the key numerical procedure determining the robustness, efficiency and scalability of the fully-coupled Newton-Krylov based, nonlinear solution method that is employed for this system of equations. The coupled system is comprised of a source term dominated Poisson equation for the electric potential, and two convection-diffusion-reaction type equations for the electron and hole concentration. The governing PDEs are discretized in space by a stabilized finite element method. Solution of the discrete system is obtained through a fully-implicit time integrator, a fully-coupled Newton-based nonlinear solver, and a restarted GMRES Krylov linear system solver. The algebraic multilevel preconditioner is based on an aggressive coarsening graph partitioning of the nonzero block structure of the Jacobian matrix. Representative performance results are presented for various choices of multigrid V-cycles and W-cycles and parameter variations for smoothers based on incomplete factorizations. Parallel scalability results are presented for solution of up to 10{sup 8} unknowns on 4096 processors of a Cray XT3/4 and an IBM POWER eServer system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

An finite element analysis surrogate model with boundary oriented graph embedding approach for rapid design

Abstract In this work, we present a boundary oriented graph embedding (BOGE) approach for the graph neural network to assist in rapid design and digital prototyping. The cantilever beam problem has been solved as an example to validate its potential of providing physical field results and optimized designs using only 10 ms. Providing shortcuts for both boundary elements and local neighbor elements, the BOGE approach can embed unstructured mesh elements into the graph and performs an efficient regression on large-scale triangular-mesh-based finite element analysis (FEA) results, which cannot be realized by other machine-learning-based surrogate methods. It has the potential to serve as a surrogate model for other boundary value problems. Focusing on the cantilever beam problem, the BOGE approach with 3-layer DeepGCN model achieves the regression with mean square error (MSE) of 0.011 706 (2.41% mean absolute percentage error) for stress field prediction and 0.002 735 MSE (with 1.58% elements having error larger than 0.01) for topological optimization. The overall concept of the BOGE approach paves the way for a general and efficient deep-learning-based FEA simulator that will benefit both industry and Computer Aided Design (CAD) design-related areas.

42 ENGINEERING↗

An implementation of the phase-field model based on coupled thermomechanical finite element solvers for large-strain twinning, explicit dynamic fracture and the classical Stefan problem

The implementation of a phase-field model in finite elements usually requires significant expertise and involves the development of a user element with additional degrees of freedom. An alternative implementation of the phase-field model within a thermo-mechanical finite element simulation package was presented in (Cho et al 2012 Int. J. Solids Struct. 49 1973–1992), where the phase-field variable is treated as the temperature degree of freedom. However, this approach has only been used for small strain phase-field modelling of martensitic transformations and quasistatic phase-field modelling of fracture. Here, we present a phase-field finite element implementation via the temperature degree of freedom for several additional cases from the literature: (i) the large-strain phase-field description of deformation twinning presented in (Clayton and Knap 2011 Physica D 240 841–858), (ii) phase-field description of brittle fracture with inertial effects based on the theory from (Molnár and Gravouil 2017, Finite Elem. Anal. Des. 130 27–38) and (Miehe et al 2010 Int. J. Numer. Methods Eng. 83 1273–1311) and (iii) the classical Stefan problem of solidification presented in (Mackenzie and Robertson 2002 J. Comput. Phys. 181 526–544). The last problem involves the temperature and phase-field variables as unknowns.

36 MATERIALS SCIENCE↗

Eulerian finite element implementations of a dislocation density-based continuum model

In Eulerian finite element simulations, the mesh moves relative to the material. After every change of position between the mesh and the material, the state variables are interpolated to the new mesh position, which is referred to as advection. Large strain crystal plasticity models are based on the multiplicative decomposition of the total deformation gradient. Further, the stress is evaluated as a function of the thermoelastic strain, temperature, and other state variables. Advection of tensor quantities, such as the strain, is coupled with possibly significant advection errors. In an effort to reduce the advection errors, we develop two rate forms of an established dislocation density-based continuum model. To that end, we replace the multiplicative decomposition of the deformation gradient with the additive decomposition of the velocity gradient, and define the stress rate instead of the total stress. The Eulerian implementation is compared with Lagrangian calculations, and two numerical examples with severe deformation levels are presented.

36 MATERIALS SCIENCE↗

Pressure and fluid-driven fracture propagation in porous media using an adaptive finite element phase field model

This work presents phase field fracture modeling in heterogeneous porous media. We develop robust and efficient numerical algorithms for pressure-driven and fluid-driven settings in which the focus relies on mesh adaptivity in order to save computational cost for large-scale 3D applications. In the fluid-driven framework, we solve for three unknowns pressure, displacements and phase field that are treated with a fixed-stress iteration in which the pressure and the displacement–phase-field system are decoupled. The latter subsystem is solved with a combined Newton approach employing a primal–dual active set method in order to account for crack irreversibility. Numerical examples for pressurized fractures and fluid filled fracture propagation in heterogeneous porous media demonstrate our developments. Finally in particular, mesh refinement allows us to perform systematic studies with respect to the spatial discretization parameter.

42 ENGINEERING↗

Modeling of High-Temperature Corrosion of Zirconium Alloys Using the eXtended Finite Element Method (X-FEM)

Oxidation modeling in modern nuclear fuel performance codes is currently limited by the lack of coupling with mechanics, thus preventing proper description of how high-temperature oxidation impacts mechanical properties. This is mostly due to the fact that the finite difference formalism adopted in corrosion models is incompatible with the direct coupling with mechanics in the finite element modeling employed in modern nuclear fuel performance codes. In this study, a physically based zirconium alloy corrosion model called the Coupled-Current Charge Compensation (C4) model, which was initially developed for operating temperature conditions, has been updated to include high-temperature corrosion in order to provide additional critical information (e.g., oxygen concentration profile) under loss-of-coolant accident (LOCA) conditions—information lacking in existing empirical models. The C4 model was implemented in the MOOSE finite-element framework developed at Idaho National Laboratory, enabling it to be used in the BISON nuclear fuel performance code based on the MOOSE framework. To precisely track the different interfaces at a relatively low computational cost, the eXtended Finite Element Method (X-FEM) was applied in MOOSE. The model’s results were compared to those of existing empirical models as well as metallographic analysis of high-temperature oxidized Zircaloy-4 coupons. Oxygen diffusivities in the a and ß phases resulting from this comparison closely agree with those found in the literature. The C4 model implemented with X-FEM in MOOSE now has the capability to accurately predict oxide, oxygen-stabilized a, and prior ß phase layer growth kinetics under isothermal exposure at high temperature (1000–1500°C). Furthermore, in contrast with the empirical models, the C4 model accounts for the finite thickness of the fuel cladding. It can predict the oxygen concentration profile evolution through the whole cladding, enabling evaluation of the remaining ductile thickness—a crucial variable for modeling the mechanical behavior of the fuel cladding under LOCA. Furthermore, this implementation allows direct coupling with mechanics, at a low computing cost, using finite-element-based nuclear fuel performance codes such as BISON.

36 MATERIALS SCIENCE↗

Experimental validation of the Finite Element-Multibody model of a cryomodule during road transportation

The present activity aims to test the Transportation Tooling (TT) designed for the Cryomodule SSR1 at Fermilab facilities. The tests consisted of road transportation trials of a cryomodule sub-assembly, suspended on a truck using the designed TT. The truck drove along a path inside Fermilab facilities. The trial was performed at an approximate speed of about 25 km/h, which is close to the transportation conditions of the complete Cryomodule. Several accelerometers were mounted on the Transportation Tooling frame and the cryomodule sub-assembly. This allowed comparing the vibration behavior of the inner frame of the TT with the solicitation coming from the truck loading bed, to assess the filtering capabilities of the tooling. Also, the acceleration of the main components could be monitored during the whole transportation, to obtain a validation of the developed numerical model.

43 PARTICLE ACCELERATORS↗