Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FREEZING OUT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Elucidate the molecular basis of ampholytic chitosan as a high-performance cryoprotectant to myosin denaturation: The importance of saccharide charges

The uses of charged poly/oligo-saccharides enable the retarding of protein denaturation against various environmental stresses during food storage and manufacturing. However, at subzero temperatures, the molecular basis of such stabilization behaviors, i.e., cryoprotections, remain less explored. Here, in this study, we introduced an ampholytic saccharide, carboxymethyl chitooligosaccharide (CMCO) that effectively inhibited the freezing-induced myosin denaturation. The in-depth cryoprotective mechanism was systematically investigated by using molecular dynamic simulation and multispectral characterizations. Results showed that CMCO may interact with myosin through hydrogen bonding and electrostatic interactions, which caused the expelling of water at protein surfaces and the reduced conformational flexibility of myosin molecules. Due to this water replacement event, both secondary and ternary structures of myosin became freezing-resistant, leading to the inhibited protein aggregations and retained functionalities, such as solubility, Ca 2+ -ATPase activity, and gelling properties. Moreover, cryoprotective behaviors of CMCO were charge-dependent. CMCO with a higher degree of carboxymethyl substitution (DS: 1.2) was inclined to bind and stabilize myosin molecules better than the low-DS (DS: 0.8) one, even though both outperformed other cryoprotective saccharides. Therefore, this investigation not only introducing a high-performance myosin cryoprotectant, but also elaborated the cryoprotective mechanism of ampholytic saccharides.

59 BASIC BIOLOGICAL SCIENCES↗

Chickpea protein hydrolysate as a novel plant-based cryoprotectant in frozen surimi: Insights into protein structure integrity and gelling behaviors

Chickpea protein (CP) and its enzymatic hydrolysates are one of the most widely consumed pulse ingredients manifesting versatile applications in food industry, such as binders, emulsifiers, and meat protein substitutes. Other than those well-known functionalities, however, the use of CP as a cryoprotectant remained unexplored. Here, in this study, we prepared the chickpea protein hydrolysate (CPH) and investigated its cryoprotective effects to frozen surimi in terms of the protein structure integrity and gelling behaviors. Results indicated that CPH could inhibit myofibrillar protein (MP) denaturation and oxidation during the freeze–thaw cycling, as evidenced by their increased solubility, Ca 2+ -ATPase activity, sulfhydryl concentration, and declined content of disulfide bonds, carbonyl concentration and surface hydrophobicity. Freezing-induced changes on MP secondary structures were also retarded. Moreover, gels prepared from CPH-protected frozen surimi demonstrated more stabilized microstructure, uniform water distribution, enhanced elasticity, gel strength and water holding capacity. The CPH alone, at a reducing addition content of 4% (w/w), exhibited comparable cryoprotective performance to that of the commercial formulation (4% sucrose and 4% sorbitol). Therefore, this study provides scientific insights for development of pulse proteins as novel and high-performance food cryoprotectants.

59 BASIC BIOLOGICAL SCIENCES↗

Production and Catalytic Upgrading of 2,3-Butanediol Fermentation Broth into Sustainable Aviation Fuel Blendstock and Fuel Properties Measurement

With the increasing demand for sustainable supplies of aviation fuel and need to address climate change, new conversion technologies are needed to efficiently process biomass, produce high quality jet fuel blendstock, and meet carbon emission targets. This study demonstrates the synthesis, conditioning, and catalytic upgrading of 2,3-butanediol (BDO) fermentation broth into a jet fuel blendstock candidate. A high-titer 2,3-BDO fermentation broth (i.e., ~90 g/L) was produced at a 100-L scale and pretreated via nanofiltration to decrease the impurities level in the broth from 4.6 to 0.6 wt%. A novel process for catalytic upgrading of aqueous 2,3-BDO into a jet fuel blendstock candidate was developed, and each step was efficiently demonstrated. The catalytic steps include 1) 2,3-BDO dehydration into methyl ethyl ketone (MEK) over AlPO4, 2) MEK conversion into olefins over Zn1Zr10Ox, 3) oligomerization of olefins over a zeolite beta, and 4) hydrogenation over platinum/carbon. Both the model feed and real 2,3-BDO fermentation broth were tested for upgrading 2,3-BDO to MEK. With the real feed, a continuous loss of conversion (i.e., >50% loss over ~140 h time-on-stream [TOS]) was partly attributed to reversible deactivation from coking species. However, the conversion remained stable with the model feed, which demonstrates the efficiency of the first step for converting aqueous 2,3-BDO (10 wt% in water). For upgrading MEK to olefins, high selectivity to olefins (i.e., 82.5%) was obtained at high conversion levels (i.e., 93-98%) with stable conditions being achieved for > 70-hours TOS. Oligomerization of light olefins, which was demonstrated for > 270 h TOS, mainly led to the formation of dimers (C8-10) and trimers (C13-14). The oligomerized product was hydrogenated and distilled to recover the jet fraction (35 mass% or 40.9% carbon based yield), which consists mostly of desired isoalkanes (31.7 wt%), n-alkanes (24.5 wt%), and cycloalkanes (29.6 wt%). While some improvement is still needed to meet ASTM D7566 specifications for viscosity and final boiling point temperature, freezing point, density, aromatics content, and sulfur content of the jet blendstock candidate were within acceptable ranges, thus highlighting the potential of this process for production of jet fuel blendstock.

ADVANCED PROPULSION SYSTEMS,BIOMASS FUELS↗

Low-Dose-Rate Brachytherapy Versus Cryotherapy in Low- and Intermediate-Risk Prostate Cancer

Purpose: Cryotherapy and brachytherapy are definitive local treatment options for low- to intermediate-risk prostate cancer. There are both prospective and retrospective data for brachytherapy, but the use of cryotherapy has been limited primarily to single-institution retrospective studies. Currently, no published evidence has compared low-dose-rate brachytherapy versus cryotherapy. Methods and Materials: Institutional review board approval was obtained to conduct a retrospective chart review of consecutive patients treated at our institution from 1990 to 2012. For inclusion, patients must have received a prostate cancer diagnosis and have been considered to have low- to intermediate-risk disease according to the National Comprehensive Cancer Network criteria. All patients received brachytherapy or cryotherapy treatment. Disease specifics and failure details were collected for all patients. Failure was defined as prostate-specific antigen nadir +2 ng/mL. Results: A total of 359 patients were analyzed. The groups comprised 50 low-risk cryotherapy (LRC), 92 intermediate-risk cryotherapy (IRC), 133 low-risk brachytherapy (LRB), and 84 intermediate-risk brachytherapy (IRB) patients. The median prostate-specific antigen follow-up periods were 85.6 months (LRC), 59.2 months (IRC), 74.9 months (LRB), and 59.8 months (IRB). The 5-year biochemical progression–free survival (bPFS) rate was 57.9% in the cryotherapy group versus 89.6% in the brachytherapy group (P<.0001). The 5-year bPFS rate was 70.0% (LRC), 51.4% (IRC), 89.4% (LRB), and 89.7% (IRB). The bPFS rate was significantly different between brachytherapy and cryotherapy for low- and intermediate-risk groups (P<.05). The mean nadir temperature reached for cryotherapy patients was −35°C (range, −96°C to −6°C). Cryotherapy used a median of 2 freeze-thaw cycles (range, 2-4 freeze-thaw cycles). Conclusions: Results from this study suggest that cryotherapy is inferior to brachytherapy for patients with low- to intermediate-risk prostate cancer. Patient selection criteria for consideration of cryotherapy and brachytherapy are similar in terms of anesthesia candidacy. Therefore, cryotherapy would not be recommended as a first-line local therapy for this particular patient subset.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Modification of magnetic ground state in Tb 2 Ni 0.90 Si 2.94 by thermal annealing

In this work, we have investigated the thermal annealing effect on the physical properties of an AlB 2 -type ternary intermetallic compound, Tb 2 Ni 0.90 Si 2.94 , that undergoes spin freezing behaviour coexisting with spatially limited antiferromagnetic phase below 9.9 K in as-cast form. Thermal annealing effect is found to result in considerable changes in the magnetic ground state properties of the system. Though only one magnetic transition around 9.9 K is observed for as-cast compound, the annealed sample exhibits two distinct magnetic transitions; one around T N ~ 13.5 K and another around T f ~ 4 K. The magnetization measurements and zero field neutron diffraction study reveal that the high temperature transition is antiferromagnetic type, though of limited correlation length, while the low temperature transition corresponds to spin freezing behaviour. The ac susceptibility and heat capacity studies also confirm the existence of frustrated cluster glass state at lower temperature than the antiferromagnetic ordering temperature. Additionally, ac susceptibility data exhibits signature of an additional peak in the even lower temperature region (at 2.2 K for zero frequency) that tends to shift in opposite direction with frequency in contrast to that observed for conventional glassy transitions. The change in intrinsic local structural disorder of Ni and Si ions associated with annealing has been argued to be responsible for the different magnetic behaviour in as-cast and annealed samples.

36 MATERIALS SCIENCE↗

Growth of CdMnTe free of large Te inclusions using the vertical Bridgman technique

Here, we grew Cd 1-x Mn x Te crystals with a nominal composition of 5% Mn and 95% Cd using the vertical Bridgman technique. We were able to grow crystals from as-received starting material that were free of secondary phases, such as Te inclusions with a size > 1-µm diameter, without adding compensating Cd to the initial charge. The Te precipitations (size < 1-µm diameter) were found to segregate towards the last-to-freeze section of the ingot. Te inclusions with a size 5-7 µm were observed at the grain boundary located near the last-to-freeze section, while the bottom and middle parts of the ingot showed no Te inclusions, even at the grain boundaries. X-ray topographic analysis was used to characterize the distribution of thermal stress in the ingot.

36 MATERIALS SCIENCE↗

Spin-glass-like behaviour in IrSr{sub 2}RECu{sub 2}O{sub 8} (RE=Sm and Eu)

We report the results of magnetic and specific heat measurements on the 1212-type compounds IrSr{sub 2}RECu{sub 2}O{sub 8} with RE=Sm and Eu, prepared by high-pressure and high-temperature synthesis. The magnetic susceptibility of these compounds shows a large difference in the temperature dependence of the magnetization measured under zero-field-cooled and field-cooled conditions below 87 and 71 K, respectively, and upon further cooling below {approx}10 K substantial maxima are observed too. Further AC susceptibility measurements support a glassy behaviour in lower magnetic transitions whereas the specific heat measurements do not show the typical long-range ordering commonly displayed in ferro, ferri or antiferromagnetic transitions. Hysteresis loops suggest the presence of magnetic clusters in the otherwise paramagnetic zone, indicating that these compounds probably display a reentrant spin-glass transition. Results are presented and discussed. - Graphical abstract: IrSr{sub 2}RECu{sub 2}O{sub 8} with RE=Sm and Eu were prepared by high-pressure and high-temperature synthesis. Both samples adopt a M-1212-type perovskite structure and a microdomain texturing of the long c-axis is observed by TEM. A very interesting magnetic behaviour is observed in these materials. A 'cluster by cluster freezing' model is proposed, instead of the classical individual spin freezing one to explain the spin-glass-like behaviour that seems to coexist with weak ferromagnetism in both compounds.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Crystal structure, microstructure and reducibility of LaNi{sub x}Co{sub 1-x}O{sub 3} and LaFe{sub x}Co{sub 1-x}O{sub 3} Perovskites (0<x<=0.5)

Nickel and iron substituted LaCoO{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried citrates and by the Pechini method. The crystal structure, morphology and defective structure of LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} were characterized by X-ray diffraction and neutron powder diffraction, TEM and SEM analyses and electron paramagnetic resonance spectroscopy. The reducibility was tested by temperature programmed reduction with hydrogen. The products of the partial and complete reduction were determined by ex-situ XRD experiments. The replacement of Co by Ni and Fe led to lattice expansion of the perovskite structure. For perovskites annealed at 900 deg. C, there was a random Ni, Fe and Co distribution. The morphology of the perovskites does not depend on the Ni and Fe content, nor does it depend on the type of the precursor used. LaCo{sub 1-x}Ni{sub x}O{sub 3} perovskites (x>0.1) annealed at 900 deg. C are reduced to Co/Ni transition metal and La{sub 2}O{sub 3} via the formation of oxygen deficient Brownmillerite-type compositions. For LaCo{sub 1-x}Ni{sub x}O{sub 3} annealed at 600 deg. C, Co/Ni metal, in addition to oxygen-deficient perovskites, was formed as an intermediate product at the initial stage of the reduction. The interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} occurs by reduction of Co{sup 3+} to Co{sup 2+} prior to the Fe{sup 3+} ions. The reducibility of Fe-substituted perovskites is less sensitive towards the synthesis procedure in comparison with that of Ni substituted perovskites. - Graphical abstract: LaCo{sub 1-x}Ni{sub x}O{sub 3} and LaCo{sub 1-x}Fe{sub x}O{sub 3} with rhombohedrally distorted perovskite structure were obtained in the temperature range of 600-900 deg. C by thermal decomposition of freeze-dried La-Co/Ni(Fe)-citrates and by the Pechini method. The complete reduction of LaCo{sub 1-x}Ni{sub x}O{sub 3} with H{sub 2} proceeds to Co/Ni-metal and La{sub 2}O{sub 3}, while the interaction of LaCo{sub 1-x}Fe{sub x}O{sub 3} with H{sub 2} is not complete up to 700 deg. C. For LaCo{sub 1-x}Fe{sub x}O{sub 3}, the reaction proceeds by preferential oxidation of Co{sup 3+} to Co{sup 2+} without affecting Fe{sup 3+} ions.

36 MATERIALS SCIENCE↗

Liquid crystallinity driven highly aligned large graphene oxide composites

Graphene is an emerging graphitic carbon materials, consisting of sp{sup 2} hybridized two dimensinal honeycomb structure. It has been widely studied to incorporate graphene with polymer to utilize unique property of graphene and reinforce electrical, mechanical and thermal property of polymer. In composite materials, orientation control of graphene significantly influences the property of composite. Until now, a few method has been developed for orientation control of graphene within polymer matrix. Here, we demonstrate facile fabrication of high aligned large graphene oxide (LGO) composites in polydimethylsiloxane (PDMS) matrix exploiting liquid crystallinity. Liquid crystalline aqueous dispersion of LGO is parallel oriented within flat confinement geometry. Freeze-drying of the aligned LGO dispersion and subsequent infiltration with PDMS produce highly aligned LGO/PDMS composites. Owing to the large shape anisotropy of LGO, liquid crystalline alignment occurred at low concentration of 2 mg/ml in aqueous dispersion, which leads to the 0.2 wt% LGO loaded composites. - Graphical abstract: Liquid crystalline LGO aqueous dispersions are spontaneous parallel aligned between geometric confinement for highly aligned LGO/polymer composite fabrication. - Highlights: • A simple fabrication method for highly aligned LGO/PDMS composites is proposed. • LGO aqueous dispersion shows nematic liquid crystalline phase at 0.8 mg/ml. • In nematic phase, LGO flakes are highly aligned by geometric confinement. • Infiltration of PDMS into freeze-dried LGO allows highly aligned LGO/PDMS composites.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Synthesis, structure and electrochemical properties of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F fluoride-phosphate

LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F fluoride-phosphate was synthesized via conventional solid-state and novel freeze-drying routes. The crystal structure was refined based on neutron powder diffraction (NPD) data and validated by electron diffraction (ED) and high-resolution transmission electron microscopy (HRTEM). The alkali ions are ordered in LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F and the transition metals jointly occupy the same crystallographic sites. The oxidation state and oxygen coordination environment of the Fe atoms were verified by {sup 57}Fe Mössbauer spectroscopy. Electrochemical tests of the LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F cathode material demonstrated a reversible activity of the Fe{sup 3+}/Fe{sup 2+} redox couple at the electrode potential near 3.4 V and minor activity of the Co{sup 3+}/Co{sup 2+} redox couple over 5 V vs Li/Li{sup +}. The material exhibited the discharge capacity of more than 82% (theo.) regarding Fe{sup 3+}/Fe{sup 2+} in the 2.4÷4.6 V vs Li/Li{sup +} potential range. - Graphical abstract: The ball-polyhedral representation of the LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F crystal structure. The MO{sub 4}F{sub 2} units are depicted as blue octahedra, PO{sub 4} units as orange tetrahedra, sodium atoms are designated as yellow (Na1), lithium – red and brown (Li2, Li3 resp.), fluorine – green, oxygen – violet spheres. - Highlights: • Freeze-drying method was successfully applied to the synthesis of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F. • The crystal structure of LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F was refined based on NPD and validated by ED and HRTEM. • LiNaCo{sub 0.5}Fe{sub 0.5}PO{sub 4}F demonstrated a reversible Li de/intercalation in the 2.5÷4.6 V vs Li/Li{sup +} range.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Quantifying the distribution of paste-void spacing of hardened cement paste using X-ray computed tomography

The distribution of paste-void spacing in cement-based materials is an important feature related to the freeze-thaw durability of these materials, but its reliable estimation remains an unresolved problem. Herein, we evaluate the capability of X-ray computed tomography (CT) for reliable quantification of the distribution of paste-void spacing. Using X-ray CT images of three mortar specimens having different air-entrainment characteristics, we calculate the distributions of paste-void spacing of the specimens by applying previously suggested methods for deriving the exact spacing of air-void systems. This methodology is assessed by comparing the 95th percentile of the cumulative distribution function of the paste-void spacing with spacing factors computed by applying the linear-traverse method to 3D air-void system and reconstructing equivalent air-void distribution in 3D. Results show that the distributions of equivalent void diameter and paste-void spacing follow lognormal and normal distributions, respectively, and the ratios between the 95th percentile paste-void spacing value and the spacing factors reside within the ranges reported by previous numerical studies. This experimental finding indicates that the distribution of paste-void spacing quantified using X-ray CT has the potential to be the basis for a statistical assessment of the freeze-thaw durability of cement-based materials. - Highlights: Black-Right-Pointing-Pointer The paste-void spacing in 3D can be quantified by X-ray CT. Black-Right-Pointing-Pointer The distribution of the paste-void spacing follows normal distribution. Black-Right-Pointing-Pointer The spacing factor and 95th percentile of CDF of paste-void spacing are correlated.

36 MATERIALS SCIENCE↗

Novel porous graphene oxide and hydroxyapatite nanosheets-reinforced sodium alginate hybrid nanocomposites for medical applications

Graphene oxide (GO) and hydroxyapatite (HAp) are frequently used as reinforcements in polymers to improve mechanical and biological properties. In this work, novel porous hybrid nanocomposites consisting of GO, HAp, and sodium alginate (SA) have been prepared by facile solution mixing and freeze drying in an attempt to obtain a scaffold with desirable mechanical and biological properties. The as-prepared porous GO/HAp/SA hybrid nanocomposites were characterized by SEM, XRD, FTIR, TGA, and mechanical testing. In addition, preliminary cell behavior was assessed by CCK8 assay. It is found that the GO/HAp/SA nanocomposites show improved compressive strength and modulus over neat SA and HAp/SA nanocomposites. CCK8 results reveal that the GO/HAp/SA nanocomposites show enhanced cell proliferation over neat SA and GO/SA nanocomposite. It has been demonstrated that GO/HAp20/SA holds promise in bone tissue engineering. - Graphical abstract: Display Omitted - Highlights: • Graphene oxide (GO), hydroxyapatite (HAp), and alginate (SA) nanocomposites were fabricated. • The novel porous composites were prepared by solution mixture and freeze drying. • The GO/HAp/SA had porous structure with porosity > 85% and pore size > 150 μm. • The GO/HAp/SA exhibited improved mechanical properties over HAp/SA counterparts. • The GO/HAp/SA showed enhanced cell proliferation over GO/SA counterparts.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High rate electrochemical performances of nanosized ZnO and carbon co-coated LiFePO{sub 4} cathode

The high rate electrochemical performances of ZnO and carbon co-coated LiFePO{sub 4} have been studied by X-ray diffraction, high-resolution transmission electron microscope, electrochemical impedance spectroscopy, cyclic voltammetry and galvanostatic measurements. The carbon coated LiFePO{sub 4} material was prepared by a freeze-drying method, and the diffusion coefficient and exchange current of these materials were calculated from their electrochemical impedance spectroscopy. The electrode delivered a reversible capacity of about 90% of the theoretical capacity when cycled between 2.5 and 4.2 V and showed stable cycle performance at high charge/discharge rates. This study showed that the co-coating process and freeze-drying method can effectively improve the electrochemical performances of LiFePO{sub 4} materials.

36 MATERIALS SCIENCE↗

Ceramic/metal nanocomposites by lyophilization: Processing and HRTEM study

Highlights: Black-Right-Pointing-Pointer A cryogenic route has been used to obtain ceramic/metal nanostructured powders. Black-Right-Pointing-Pointer The powders present good homogeneity and dispersion of metal. Black-Right-Pointing-Pointer The metal nanoparticle size distributions are centred in 17-35 nm. Black-Right-Pointing-Pointer Both phases, ceramic and metal, present a high degree of crystallinity. Black-Right-Pointing-Pointer Good metal/ceramic interfaces due to epitaxial growth, studied by HRTEM. -- Abstract: This work describes a wet-processing route based on spray-freezing and subsequent lyophilization designed to obtain nanostructured ceramic/metal powders. Starting from the ceramic powder and the corresponding metal salt, a water-based suspension is sprayed on liquid nitrogen. The frozen powders are subsequently freeze-dried, calcined and reduced. The material was analyzed using X-ray diffraction analysis at all stages. High resolution transmission electron microscopy studies showed a uniform distribution of metal nanoparticles on the ceramic grain surfaces, good interfaces and high crystallinity, with an average metal particle size in the nanometric range.

36 MATERIALS SCIENCE↗

Effects of lanthanum dopants on the Curie–Weiss and the local order behaviors for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} relaxor ferroelectrics

Graphical abstract: The local order as a function of temperature by using (a) the spin-glass model and (b) the modified-Landau theory for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics with different amounts of lanthanum dopants. Display Omitted Highlights: ► The effects of La are investigated for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. ► La can change their dielectric properties and ordering state. ► The spin glassy behaviors and the freezing process are also affected by La. ► The response mechanisms of La are proposed for the local polarization behavior. -- Abstract: The effects of lanthanum dopants are investigated on the dielectric responses for Pb{sub 1−x}La{sub x}(Fe{sub 2/3}W{sub 1/3}){sub 0.7}Ti{sub 0.3}O{sub 3} ceramics. According to the experimental data and fitting results, it is concluded that the dielectric characteristics are changed from a long-range-ordered (LRO) ferroelectric state to a short-range-ordered (SRO) relaxor by increasing the amounts of lanthanum dopants. Furthermore, the spin glassy behaviors and the freezing process of local polarizations are not only affected by the ordering degree of B-site cations but also affected by the defect polar pairs. Their response mechanisms are proposed that the growth of the 1:1 ordered domain Pb{sub 1−x}La{sub x}(Fe{sub 1/2}W{sub 1/2})O{sub 3} is impeded since its charge imbalance is enhanced by increasing the amounts of lanthanum dopants, and the defect polar pairs of lead, tungsten and oxygen vacancy are induced by the pyrochlore phase, PbWO{sub 4} or Pb{sub 0.99}La{sub 0.01}WO{sub 4}, when the amount of lanthanum dopants exceed 5 mol.%.

36 MATERIALS SCIENCE↗

Graphene oxide foams and their excellent adsorption ability for acetone gas

Graphical abstract: - Highlights: • GO and RGO foams were prepared using a simple and green method, unidirectional freeze-drying. • The porous structure of the foams can be adjusted by changing GO concentrations. • GO and RGO foams show good adsorption efficiency for acetone gas. - Abstract: Graphene oxide (GO) and reduced graphene oxide (RGO) foams were prepared using a unidirectional freeze-drying method. These porous carbon materials were characterized by thermal gravimetric analysis, differential scanning calorimetry, X-ray photoelectron spectroscopy and scanning electron microscopy. The adsorption behavior of the two kinds of foams for acetone was studied. The result showed that the saturated adsorption efficiency of the GO foams was over 100%, and was higher than that of RGO foams and other carbon materials.

36 MATERIALS SCIENCE↗

Growth and characterization of kesterite Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals for photovoltaic applications

Highlights: • Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} crystals were grown using vertical gradient freeze technique. • Grown CZTSSe crystals exhibited highly crystalline tetragonal kesterite structure. • Grown ingot showed a homogeneous, stoichiometric composition along the growth axis. • Cu-rich particulates were observed along the polycrystalline grain boundaries. • Large volume of high quality CZTSSe can be grown using this novel VGF method. - Abstract: Cu{sub 2}ZnSn(S{sub x}Se{sub 1−x}){sub 4} (CZTSSe) bulk crystals have been grown for the first time, in multi-gram quantities, using a novel vertical gradient freeze (VGF) technique. Large grain polycrystalline CZTSSe ingot with grain sizes ∼0.2–0.5 mm was grown in a vacuum sealed quartz ampoule. Structural, compositional, and electronic properties of the ingot were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), energy dispersive X-ray spectroscopy (EDS), and van der Pauw measurements. XRD analysis showed highly crystalline tetragonal structure corresponding to kesterite CZTSSe with lattice constants of a = 5.563 Å, and c = 11.09 Å (c/2a = 0.997) and Raman spectra confirmed the formation of single phase CZTSSe. High-resolution XPS spectra confirmed the formation of metal-sulfoselenides. The ingot along the growth axis showed a homogeneous near stoichiometric elemental distribution corresponding to Cu/(Zn + Sn) = 0.94 and Zn/Sn = 0.98. EDS mapping on the ingot's outer surface revealed formation of islanded Cu-rich droplets at the grain boundaries. Grown crystals exhibited p-type conductivity with a measured bulk resistivity of ∼51 Ω cm.

36 MATERIALS SCIENCE↗

Pyrophosphates AMoP2O7 (A = Li and Na): Synthesis, structure and electrochemical properties

Highlights: • Carbon-coated pyrophosphate materials AMoP2O7 (A = Li and Na) were prepared via freeze- drying method. • BVEL analysis revealed the remarkable difference in the alkali diffusion behaviors of two AMoP{sub 2}O{sub 7} polymorphs. • LiMoP{sub 2}O{sub 7} shows the superior electrochemical activity towards de/intercalation of Li{sup +} and Na{sup +} ions compared with NaMoP{sub 2}O{sub 7} - Abstract: The carbon-coated single-phase samples of the pyrophosphates AMoP{sub 2}O{sub 7} (A = Li and Na) were synthesized using freeze-drying followed by annealing in a sealed silica tube with the Fe/FeO getter. The Rietveld refinement of the X-Ray powder diffraction data proved both structures are built up as a network of corner-linked MoO{sub 6} octahedra and P{sub 2}O{sub 7} groups with A-cations located in the open tunnels running along the [100] (LiMoP{sub 2}O{sub 7}) and [101] (NaMoP{sub 2}O{sub 7}) directions. The bond valence energy landscapes (BVEL) analysis revealed three-dimensional pathways of alkali-ion migration with significantly different activation energies (0.8 eV for LiMoP{sub 2}O{sub 7} and 4.5 eV for NaMoP{sub 2}O{sub 7}) anticipating LiMoP{sub 2}O{sub 7} to exhibit faster Li{sup +} diffusion and better electrochemical characteristics. Both materials displayed electrochemical activity in Li- and Na-cells with reversible capacities of ∼20 mA h g{sup −1} for NaMoP{sub 2}O{sub 7} and more than 70 mA h g{sup −1} for LiMoP{sub 2}O{sub 7}, being in a good agreement with the BVEL results.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗