Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FACET”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Highly Oxidized Oxide Surface toward Optimum Oxygen Evolution Reaction by Termination Engineering

The oxygen evolution reaction (OER) is a critical step for sustainable fuel production through electrochemistry process. Maximizing active sites of nanocatalyst with enhanced intrinsic activity, especially the activation of lattice oxygen, is gradually recognized as the primary incentive. Since the surface reconfiguration to oxyhydroxide is unavoidable for oxygen-activated transition metal oxides, developing a surface termination like oxyhydroxide in oxides is highly desirable. In this work, we demonstrate an unusual surface termination of (111)-facet Co 3 O 4 nanosheet that is exclusively containing edge-sharing octahedral Co 3+ similar to CoOOH that can perform at approximately 40 times higher current density at 1.63 V (vs RHE) than commercial RuO 2 . It is found that this surface termination has an oxidized oxygen state in contrast to standard Co-O systems, which can serve as active site independently, breaking the scaling relationship limit. Finally, this work forwards the applications of oxide electrocatalysts in the energy conversion field by surface termination engineering.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Annealing of focused ion beam damage in gold microcrystals: an in situ Bragg coherent X-ray diffraction imaging study

Focused ion beam (FIB) techniques are commonly used to machine, analyse and image materials at the micro- and nanoscale. However, FIB modifies the integrity of the sample by creating defects that cause lattice distortions. Methods have been developed to reduce FIB-induced strain; however, these protocols need to be evaluated for their effectiveness. Here, non-destructive Bragg coherent X-ray diffraction imaging is used to study the in situ annealing of FIB-milled gold microcrystals. Two non-collinear reflections are simultaneously measured for two different crystals during a single annealing cycle, demonstrating the ability to reliably track the location of multiple Bragg peaks during thermal annealing. The thermal lattice expansion of each crystal is used to calculate the local temperature. This is compared with thermocouple readings, which are shown to be substantially affected by thermal resistance. To evaluate the annealing process, each reflection is analysed by considering facet area evolution, cross-correlation maps of the displacement field and binarized morphology, and average strain plots. The crystal's strain and morphology evolve with increasing temperature, which is likely to be caused by the diffusion of gallium in gold below ~280°C and the self-diffusion of gold above ~280°C. The majority of FIB-induced strains are removed by 380–410°C, depending on which reflection is being considered. These observations highlight the importance of measuring multiple reflections to unambiguously interpret material behaviour.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Mechanistic Insights Into Fatigue Life Enhancement of High‐Strength Steel via Ultrasonic Impact Treatment

In this work we explore the impact of Ultrasonic Impact Treatment (UIT) on the fatigue performance of high‐strength microalloyed steel commonly used in crankshaft applications. Building on prior observations of fatigue life improvement with UIT, this work focuses on unraveling the process–structure–performance relationships underpinning these enhancements. Microstructural analysis revealed significant grain refinement in the near‐surface layers, with deformation depth increasing at higher impact energies. This led to increased surface hardness and the development of deeper compressive residual stresses, particularly in samples treated with higher impact energy. Rotating bending fatigue testing showed a substantial improvement in fatigue life for UIT‐treated samples, with the endurance limit nearly doubling compared with untreated specimens. Fractographic analysis revealed a transition in crack initiation from surface defects in untreated samples to interior regions in UIT‐treated samples, characterized by the formation of noninclusion‐induced granular bright facets (GBFs). The observed fatigue enhancement is attributed to the synergistic effects of strain hardening and compressive residual stresses, which increase the surface crack threshold and promote interior crack initiation. This study provides new mechanistic insight into UIT‐induced fatigue resistance and interior failure behavior in high‐strength steels.

36 MATERIALS SCIENCE↗

Final Report for "FSML – Fusion Simulation Markup Language".

The developed software consists of two parts: FSML and VizSchema. FSML is based on an XML schema that represents the visualization entities needed for displaying fields and particles data in visualization tools. Each application is then represented by an XML instance mapping its data into the XML schema. Such XML file is used by the FSML reading library to bring in fields, particles and meshes from HDF5 files into memory. Based on this library, we developed AVS/Express and VisIt plugins. The second (more flexible) part of the software is called VizSchema. It consists of the schema expressed as a set of conventions and static data in the VizSchema code. The conventions describe the markup and organization of HDF5 data that would allow easy interpretation of data in the visualization terms. Based on theses conventions, a C++ HDF5-specific API for reading the visualization data was created. Finally, based on this library, we developed a new VisIt plugin (called Vs), which allows importing data from multiple applications using the markup. These applications include VORPAL, FACETS, UEDGE, NIMROD and MODAVE. The plugin will be included into the next releases of VisIt.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

NASA Simulation Capabilities

This presentation provides a high-level overview of NASA's Future ATM Concepts Evaluation Tool (FACET) with a high-level description of the system's inputs and outputs. This presentation is designed to support the joint simulations that NASA and the Chinese Aeronautical Establishment (CAE) will conduct under an existing Memorandum of Understanding.

ICD↗

Simulation of Solar-Induced Chlorophyll Fluorescence from 3D Canopies with the Dart Model

The potential of solar-induced chlorophyll fluorescence (SIF) to monitor photosynthesis and plant stress has attracted considerable interest in SIF remote sensing (RS). However, canopy SIF and RS observations are impacted by topography, vegetation three dimension (3D) structure, leaf orientation, non foliar elements (e.g., tree woody skeleton), ... Physically based downscaling of canopy SIF RS data to leaf-level (i.e., to leaf photosynthesis) requires 3D radiative transfer (RT) models simulating canopy SIF and its observation. These models are necessary to better exploit the potential of SIF, by linking leaf SIF and SIF in RS observations as a function of canopy 3D architecture and experimental configurations (sun and viewing directions, etc.). The Discrete Anisotropic Radiative Transfer (DART) model is a comprehensive 3D radiative transfer (RT) model for urban and natural landscapes. This paper presents its SIF modeling for vegetation simulated with facets, its validation with the SCOPE/mSCOPE 1D models, and its recent extension to SIF modelling for landscapes simulated with 3D turbid medium.

radiative transfer↗

Electron Microscopy Characterizations and Atom Probe Tomography of Intergranular Attack in Alloy 600 Exposed to PWR Primary Water

Detailed examinations of intergranular attack (IGA) in alloy 600 were performed after exposure to simulated PWR primary water at 325°C for 500 h. High-resolution analyses of IGA characteristics were conducted on specimens with either a 1 µm diamond or 1200-grit SiC surface finish using scanning electron microscopy, transmission electron microscopy and atom probe tomography techniques. The diamond-polish finish with very little preexisting subsurface damage revealed attack of high-energy grain boundaries that intersected the exposed surface to depths approaching ~2 µm. In all cases, IGA from the surface is localized oxidation consisting of porous, nanocrystalline MO-structure and spinel particles along with regions of faceted wall oxidation. Surprisingly, this continuous IG oxidation transitions to discontinuous, discrete Cr-rich sulfide particles up to ~50 nm in diameter. In the vicinity of the sulfides, the grain boundaries were severely Cr depleted (to <1 at%) and enriched in S. The 1200 grit SiC finish surface exhibited a preexisting highly strained recrystallized layer of elongated nanocrystalline matrix grains. Similar IG oxidation and leading sulfide particles were found, but the IGA depth was typically confined to the near-surface (~400 nm) recrystallized region. Difference in IGA for the two surface finishes indicates that the formation of grain boundary sulfides occurs during the exposure to PWR primary water. The source of S remains unclear, however it is not present as sulfides in the bulk alloy nor is it segregated to bulk grain boundaries.

Olszta, Matthew J.↗

Sintering behavior of Lanthana-bearing nanostructured ferritic steel consolidated via spark plasma sintering

Elemental powder mixture of Fe–14Cr–1Ti–0.3Mo–0.5La 2 O 3 (wt%) composition is mechanically alloyed for different milling durations (5, 10 and 20 h) and subsequently consolidated via spark plasma sintering under vacuum at 950 °C for 7 min. The effects of milling time on the densification behavior and density/microhardness are studied. The sintering activation energy is found to be close to that of grain boundary diffusion. The bimodal grain structure created in the milled and sintered material is found to be a result of milling and not of sintering alone. The oxide particle diameter varies between 2 and 70 nm. As a result, faceted precipitates smaller than 10 nm in diameter are found to be mostly La–Ti–Cr-enriched complex oxides that restrict further recrystallization and related phenomena.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

A Mesocrystal‐Like Morphology Formed by Classical Polymer‐Mediated Crystal Growth

Abstract Growth by oriented assembly of nanoparticles is a widely reported phenomenon for many crystal systems. While often deduced through morphological analyses, direct evidence for this assembly behavior is limited and, in the calcium carbonate (CaCO 3 ) system, has recently been disputed. However, in the absence of a particle‐based pathway, the mechanism responsible for the creation of the striking morphologies that appear to consist of subparticles is unclear. Therefore, in situ atomic force microscopy is used to investigate the growth of calcite crystals in solutions containing a polymer additive known for its ability to generate crystal morphologies associated with mesocrystal formation. It is shown that classical growth processes that begin with impurity pinning of atomic steps, leading to stabilization of new step directions, creation of pseudo‐facets, and extreme surface roughening, can produce a microscale morphology previously attributed to nonclassical processes of crystal growth by particle assembly.

Smeets, Paul J. M.↗

Atomic-Scale Mechanism of Unidirectional Oxide Growth

A basic knowledge of the unidirectional growth mechanisms is required for precise control on size, shape, and thereby functionalities of nanostructures. The oxidation of many metals results in oxide nanowire growth with a bicrystal grain boundary along the axial direction. Using transmission electron microscopy that spatially and temporally resolves CuO nanowire growth during the oxidation of copper, here we provide direct evidence of the correlation between unidirectional crystal growth and bicrystal grain boundary diffusion. Based on atomic scale observations of the upward growth at the nanowire tip, oscillatory downward growth of atomic layers on the nanowire sidewall and the parabolic kinetics of lengthening, bicrystal grain boundary diffusion is the mechanism by which Cu ions are delivered from the nanowire root to the tip. Together with density-functional theory calculations, we further show that the asymmetry in the corner-crossing barriers promotes the unidirectional oxide growth by hindering the transport of Cu ions from the nanowire tip to the sidewall facets. We anticipate the broader applicability of these results in manipulating the growth of nanostructured oxides by controlling the bicrystal grain boundary structure that favors anisotropic diffusion for unidirectional, one-dimensional crystal growth for nanowires or isotropic diffusion for two-dimensional platelet growth.

36 MATERIALS SCIENCE↗

Surfactant-Free Shape Control of Gold Nanoparticles Enabled by Unified Theoretical Framework of Nanocrystal Synthesis

Gold nanoparticles possess unique properties that are highly dependent on their shape and size. Synthetic methods that enable precise control over nanoparticle morphology currently require shape-directing agents such as surfactants or polymers that force growth in a particular direction by adsorbing to specific crystal facets. These auxiliary reagents passivate the nanoparticles' surface, and thus decrease their performance in applications like catalysis and surface-enhanced Raman scattering. In this work, a surfactant- and polymer-free approach to achieving high-performance gold nanoparticles is reported. A theoretical framework to elucidate the growth mechanism of nanoparticles in surfactant-free media is developed and it is applied to identify strategies for shape-controlled syntheses. Using the results of the analyses, a simple, green-chemistry synthesis of the four most commonly used morphologies: nanostars, nanospheres, nanorods, and nanoplates is designed. The nanoparticles synthesized by this method outperform analogous particles with surfactant and polymer coatings in both catalysis and surface-enhanced Raman scattering.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Si Complies with GaN to Overcome Thermal Mismatches for the Heteroepitaxy of Thick GaN on Si

Heteroepitaxial growth of lattice mismatched materials has advanced through the epitaxy of thin coherently strained layers, the strain sharing in virtual and nanoscale substrates, and the growth of thick films with intermediate strain‐relaxed buffer layers. However, the thermal mismatch is not completely resolved in highly mismatched systems such as in GaN‐on‐Si. Here, geometrical effects and surface faceting to dilate thermal stresses at the surface of selectively grown epitaxial GaN layers on Si are exploited. The growth of thick (19 µm), crack‐free, and pure GaN layers on Si with the lowest threading dislocation density of 1.1 × 10 7 cm −2 achieved to date in GaN‐on‐Si is demonstrated. With these advances, the first vertical GaN metal–insulator–semiconductor field‐effect transistors on Si substrates with low leakage currents and high on/off ratios paving the way for a cost‐effective high power device paradigm on an Si CMOS platform are demonstrated

Tanaka, Atsunori↗

Surface Engineering of Nanostructured Energy Materials

All nanostructures share a common feature of large surface-to-volume ratio, which makes surface engineering a vital tool for exploring their new and important applications in many different areas. Particularly, inorganic nanostructures represent a class of intriguing catalysts that can find wide uses in energy conversion, energy storage, and environmental remediation. In this work, a number of surface engineering strategies, including morphology control, defect incorporation, and interface manipulation for tailoring the shape, facet, defect, interfacial property, and composition of nanostructures, aiming at controlling the chemical and physical properties such as energy bandgap and surface energy toward great enhancement in catalytic performance, are discussed.

36 MATERIALS SCIENCE↗

Imitating Architectural Mortise‐Tenon Structure for Stable Ni‐Rich Layered Cathodes

Ni-rich layered oxides are the most promising cathodes for Li-ion batteries, but chemo-mechanical failures during cycling and large first-cycle capacity loss hinder their applications in high-energy batteries. Herein, by introducing spinel-like mortise-tenon structures into the layered phase of LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811), the adverse volume variations in cathode materials can be significantly suppressed. Meanwhile, these mortise-tenon structures play the role of the expressway for fast lithium-ion transport, which is substantiated by experiments and calculations. Moreover, the particles with mortise-tenon structures usually terminate with the most stable (003) facet. The new cathode exhibits a discharge capacity of 215 mAh g –1 at 0.1 C with an initial Coulombic efficiency of 97.5%, and capacity retention of 82.2% after 1200 cycles at 1 C. Importantly, this work offers a viable lattice engineering to address the stability and low initial Coulombic efficiency of the Ni-rich layered oxides, and facilitates the implementation of Li-ion batteries with high-energy density and long durability.

25 ENERGY STORAGE↗

Synthesis of Zwitterionic CsPbBr 3 Nanocrystals with Controlled Anisotropy using Surface‐Selective Ligand Pairs

Abstract Mechanistic studies of the morphology of lead halide perovskite nanocrystals (LHP‐NCs) are hampered by a lack of generalizable suitable synthetic strategies and ligand systems. Here, the synthesis of zwitterionic CsPbBr 3 NCs is presented with controlled anisotropy using a proposed “surface‐selective ligand pairs” strategy. Such a strategy provides a platform to systematically study the binding affinity of capping ligand pairs and the resulting LHP morphologies. By using zwitterionic ligands (ZwL) with varying structures, majority ZwL‐capped LHP NCs with controlled morphology are obtained, including anisotropic nanoplatelets and nanorods, for the first time. Combining experiments with density functional theory calculations, factors that govern the ligand binding on the different surface facets of LHP‐NCs are revealed, including the steric bulkiness of the ligand, the number of binding sites, and the charge distance between binding moieties. This study provides guidance for the further exploration of anisotropic LHP‐NCs.

36 MATERIALS SCIENCE↗

Purification and Characterization of Protein Nanotubes Assembled from a Single Bacterial Microcompartment Shell Subunit

Bacterial microcompartments (BMCs) are apparently icosahedral proteinaceous organelles that are bioinformatically identified in an increasing number of bacterial species. BMCs are delimited by a protein shell composed predominantly of hexameric (BMC-H) subunits that tile into the facets of the BMC shell. Here we report a new biomaterial composed of the single BMC-H protein encoded in the BMC locus of Mycobacterium smegmatis; the function of this type of BMC is unknown. When expressed in Escherichia coli, this BMC-H protein, RmmH, self-assembles into nanotubes, densely packed in the cytoplasmic space. These are the first BMC nanotubes to be purified from cells intact and characterized. Here, we also show formation of the nanotubes initiated from free RmmH hexamers in vitro. Based on the dimensions of the nanotubes and modeling of the RmmH hexamer, we propose two possible structural models. BMC nanotubes offer a new spatial architecture both in vivo and in vitro, composed of a single protein that may be genetically or chemically modified and for use as tubular scaffolding.

36 MATERIALS SCIENCE↗