Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELECTROMAGNETIC PULSES”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Submicron surface patterning by laser ablation with short UV pulses using a proximity phase mask setup

A new approach for the generation of large-area periodic surface structures on different materials, like polymers and semiconductors, by direct laser ablation is presented. The surfaces were illuminated with the interference pattern emerging in close proximity behind a laser irradiated phase mask. In the experiments, nanosecond and picosecond laser pulses at 248 nm were applied. To prevent contamination or damage of the phase mask caused by the ablated material, the mask is protected by a thin water film or a thin quartz plate. In addition we present a technique to eliminate a lateral variation of the generated structures due to insufficient alignment precision of the workpiece.

36 MATERIALS SCIENCE↗

Circular Dichroism in Laser-Assisted Short-Pulse Photoionization

A remarkable effect of circular dichroism, i.e., a difference in photoelectron spectra produced by right and left circularly polarized light in two-color multiphoton ionization of atoms, is predicted for the case when the atom is ionized by an extreme ultraviolet or x-ray femtosecond pulse in the field of a strong infrared laser pulse, both pulses being circularly polarized. We show that the sidebands formed in the spectra exhibit different circular dichroism often of different signs both in angle-resolved and angle-integrated experimental conditions. The effect can be used for detecting and measuring circular polarization of x rays in a spectral range where other methods are not effective.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Adiabatically driven frequency conversion towards short extreme-ultraviolet radiation pulses

We present an experimental demonstration of sum-frequency generation toward tunable picosecond, broadband radiation pulses in the extreme-ultraviolet regime, supported by adiabatically prepared atomic coherences. We drive a two-photon transition in a dense medium of xenon atoms with a long (nanosecond) pump laser pulse at the Fourier-transform-limited bandwidth and with a wavelength of 225 nm. The frequency of the pump pulse is slightly detuned from exact two-photon resonance. In this configuration, the medium is adiabatically driven by a process of coherent population return. The adiabatic passage process generates a maximal coherent superposition of two quantum states with large energy spacing. An additional, short (picosecond) probe laser pulse at a wavelength of 540 nm beats with the maximal atomic coherence and generates a short (picosecond) signal radiation pulse at 93 nm. As compared to conventional (diabatic) frequency conversion, the adiabatically driven maximal atomic coherence yields enhanced conversion efficiency and significantly enhanced stability.

74 ATOMIC AND MOLECULAR PHYSICS↗

Effect of SF{sub 6} and NF{sub 3} additives on UV and IR lasing in nitrogen

The lasing regimes of nitrogen laser on the C{sup 3{Pi}}{sub u} - B{sup 3{Pi}}{sub g} transition with a high-energy long laser pulse under pumping by a transverse discharge in N{sub 2} - SF{sub 6} (NF{sub 3}) mixtures from generators with a semiconductor opening switch is studied. Laser pulses with two peaks and controlled delay between these peaks are obtained. It is shown that the time interval between the peaks may exceed 50 ns for N{sub 2} - NF{sub 3} mixtures. The conditions for obtaining effective UV lasing with a laser pulse width of more than 50 ns at the base level are determined. A possibility of depopulating the lower level of the C{sup 3{Pi}}{sub u} - B{sup 3{Pi}}{sub g} transition by induced transitions in the first positive B{sup 3{Pi}}{sub g} - A{sup 3{Sigma}}{sub u}{sup +} system is shown; this process makes it possible to expand the pulse to 100 ns at {lambda} = 337.1 nm. The highest lasing energy and power in the IR and UV spectral ranges are obtained for nitrogen lasers with spark preionisation. (lasers)

74 ATOMIC AND MOLECULAR PHYSICS↗

Multidiagnostic analysis of ultrafast laser ablation of metals with pulse pair irradiation

Copper targets are irradiated in the ablation regime by pairs of equal, time-delayed collinear laser pulses separated on a timescale going from {approx_equal}2 ps to {approx_equal}2 ns. The ablation plume is characterized by ion probe diagnostic, fast imaging, and temporally and spatially resolved optical emission spectroscopy. The variation in the ablation efficiency with the delay between the pulses is analyzed by measuring the ablation crater profile with a contact profilometer. The second laser pulse modifies the characteristics of the plasma plume produced by the first pulse and the ablation efficiency. The different mechanisms involved in double pulse ultrafast laser ablation are identified and discussed. The experimental findings are interpreted in the frame of a simple model of the interaction of the second pulse with the nascent ablation plume produced by the first pulse. This model yields consistent and quantitative agreement with the experimental findings predicting the observed experimental trends of the ablation depth reduction and ion yield increase with the delay between the pulses, as well as the characteristic timescale of the observed changes. The possibility of controlling the characteristics of the plumes produced during ultrafast laser ablation via an efficient coupling of the energy of the second pulse to the various ablation components produced by the first pulse is of particular interest in ultrafast pulsed laser deposition and microprobe analyses of materials.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

How Shaped Light Discriminates Nearly Identical Biochromophores

We present a general mechanism for successful discrimination of spectroscopically indistinguishable biochromophores by shaped light. For this purpose we use nonadiabatic dynamics in excited electronic states in the frame of the field-induced surface hopping method driven by the experimentally shaped laser fields. Our findings show that optimal laser fields drive low-frequency vibrational modes localized in the side chains of two biochromophores, thus selecting the parts of their potential energy surfaces characterized by different transition dipole moments leading to different ionization probabilities. The presented mechanism leads to selective fluorescence depletion which serves as a discrimination signal. Our findings offer a promising perspective for using optimally shaped laser pulses in bioanalytical applications by increasing the selectivity beyond the current capability.

74 ATOMIC AND MOLECULAR PHYSICS↗

Experimental Investigation of Liquid-propellant Laser Propulsion with a Horizontal Momentum Measuring Lever

Thrust performance of Liquid-propellant laser propulsion (LLP) is seriously influenced by factors like laser parameters, choice of propellants and ablation materials. For the purpose of studying these influences, series of impulse measuring experiments for various propellants and ablation materials were conducted. The key device is a Horizontal Momentum Measuring Lever, which covers a C{sub m} measuring range from 10{sup 3} Ns/MJ to about 1.6x10{sup 4} Ns/MJ. A Nd:YAG laser was used as the laser source. From the result, it is found that laser energy density plays an important role on LLP efficiency, higher energy density leads to higher C{sub m} and I{sub sp}. Highest C{sub m} of about 10{sup 4} Ns/MJ with the I{sub sp} of 3.57s was achieved by focusing the laser to the average energy density of 8.83x10{sup 8} W/cm{sup 2}. Besides of that, it is also found that when the energy density is certainly high, C{sub m} of LLP increases stably with the increase of the propellant thickness, which gives a potential way to further improve the thrust performance in LLP.

42 ENGINEERING↗

Particle Production under External Fields and Its Applications

The thesis presents studies of vacuum pair productions and its applications in early universe cosmology and high energy astrophysics. Vacuum often becomes unstable and spontaneously decays into pairs of particles in rapidly expanding universes or under strong external electromagnetic fields. Theoretically, spontaneous pair productions due to such non-trivial backgrounds of spacetimes or electromagnetic fields are well-understood. However, the effect of particle productions has not been observed so far because of experiemtal difficulties in obtaining large curvatures of space-times or strong electric fields. Although it may be impossible to observe the pair productions directly via laboratory experiments, there are still powerful sources of space-time curvatures or electric fields in cosmology and astrophysics, which result in observations. In Part I, we explore the inflationary models in early universe utilizing pair productions through gravity. We study observable signatures on the cosmic microwave background, such as isocurvature perturbations and non-Gaussianities, generated from the particle production of WIMPzillas and axions during or after inflation. In Part II, we investigate the electron-positron pair production in the magnetosphere of pulsars whose electromagnetic fields are expected to close to or even greater than the pair production threshold. In particular, we demonstrate that the pair production may be responsible for giant pulses from the Crab pulsar.

79 ASTRONOMY AND ASTROPHYSICS↗

Design and Characterization of a Lens-Coupled System for Dynamic X-Ray Diffraction

X-ray diffraction (XRD) is a necessary technique for understanding states of materials under static and dynamic loading conditions. The higher-pressure Equation of State (EOS) of many materials can only be explored via shock or ramp compression at temperatures and pressures of interest. While static XRD work has yielded EOS measurements in the 100 - 200 GPa regime, dynamic X-ray diffraction (DXRD) can explore EOS phases in the TPa regime, which closely resembles inner-core planetary conditions. DXRD hinges on the ability to measure the exact phase or phase change of a material while under dynamic loading conditions. Macroscopic diagnostic systems (e.g. velocimetry and pyrometry) can infer a phase change but not identify the specific phase entered by a material. While microscopic (atomic-level) diagnostic systems (e.g. DXRD) have been designed and implemented in Department of Energy’s (DOE) National Laboratories complex, the unique nature of Sandia National Laboratories’ Pulsed Power Facility (Z Machine) prohibits the use of such devices. The destructive nature of Z experiments presents a challenge to data capture and retrieval. Furthermore there are electromagnetic interference, X-ray background, and mechanical constraints to consider. Thus, a multi-part X-ray diagnostic for use on the Z Machine and Z-Beamlet Laser system has been designed and analyzed. Portions of this new DYnamic SCintillator Optic (DYSCO) have been built, tested and fielded. A data analysis software has been written. Finally, the radiance profile of the DYSCO’s scintillator has been characterized through experiments performed at the University of Arizona.

36 MATERIALS SCIENCE↗

Fourth-order harmonic generation during parametric four-wave mixing in the filaments in ambient air

We propose a simplified scheme for efficient 200-nm pulse generation in isotropic medium using 800-nm radiation. The observation and optimization of the fourth-order harmonic generation during two-color filamentation in air are reported. This parametric process is based on four-wave mixing of the fundamental and the second-order harmonic radiation of the Ti:sapphire laser. A systematic study of the influence of the laser intensity, the polarization, the chirp, and the pulse duration on the fourth-order harmonic output from the filaments has been carried out. The fourth-order harmonic conversion efficiency was estimated to be of the order of 10{sup -4}.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

X-ray phase-contrast imaging with an Inverse Compton Scattering source

Single-shot in-line phase-contrast imaging with the Inverse Compton Scattering X-ray source available at ATF (Accelerator Test Facility) at Brookhaven National Laboratory is experimentally demonstrated. Phase-contrast images of polymer wires are obtained with a single X-ray pulse whose time length is about 1 picosecond. The edge-enhancement effect is clearly visible in the images and simulations show a quantitative agreement with experimental data. A phase-retrieval step in the image processing leads to a accurate estimation of the projected thickness of our samples. Finally, a single-shot image of a wasp is presented as an example of a biological sample.

07 ISOTOPE AND RADIATION SOURCES↗

Photoemission Studies of Metallic Photocathodes Prepared by Pulsed Laser Ablation Deposition Technique

We present the results of our investigation on metallic films as suitable photocathodes for the production of intense electron beams in RF photoinjector guns. Pulsed laser ablation deposition technique was used for growing Mg and Y thin films onto Si and Cu substrates in high vacuum and at room temperature.Different diagnostic methods were used to characterize the thin films deposited on Si with the aim to optimize the deposition process. Photoelectron performances were investigated on samples deposited on Cu substrate in an ultra high vacuum photodiode chamber at 10{sup -7} Pa. Relatively high quantum efficiencies have been obtained for the deposited films, comparable to those of corresponding bulks. Samples could stay for several months in humid open air before being tested in a photodiode cell. The deposition process and the role of the photocathode surface contamination and its influence on the photoelectron performances are presented and discussed.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

THE SOLAR X-RAY CONTINUUM MEASURED BY RESIK

The solar X-ray continuum emission at five wavelengths between 3.495 A and 4.220 A for 19 flares in a 7-month period in 2002-2003 was observed by the RESIK (REntgenovsky Spektrometr s Izognutymi Kristalami) crystal spectrometer on CORONAS-F. In this wavelength region, free-free and free-bound emissions have comparable fluxes. With a pulse-height analyzer having settings close to optimal, the fluorescence background was removed so that RESIK measured true solar continuum in these bands with an uncertainty in the absolute calibration of +-20%. With an isothermal assumption, and temperature and emission measure derived from the ratio of the two GOES channels, the observed continuum emission normalized to an emission measure of 10{sup 48} cm{sup -3} was compared with theoretical continua using the CHIANTI atomic code. The accuracy of the RESIK measurements allows photospheric and coronal abundance sets, important for the free-bound continuum, to be discriminated. It is found that there is agreement to about 25% of the measured continua with those calculated from CHIANTI assuming coronal abundances in which Mg, Si, and Fe abundances are four times photospheric.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Microdroplet target synthesis for kilohertz ultrafast lasers

We have developed a method for producing spatially stable micron-scale liquid targets of flexible shapes at kilohertz repetition rate for use in air and vacuum, by perturbing 5 and 30 {mu}m diameter streams with femtosecond laser pulses and monitoring the temporal development of the perturbation. Using water, we have produced features such as 2.1 {mu}m diameter droplet and 1.3 {mu}m diameter neck with less than {+-}0.3 {mu}m shot-to-shot variation, with prospects for further reduction in size and variability. The use of such micron-scale targets can be expected to prevent conductive heat dissipation, enhance field strength for ion acceleration and allow spatially-deterministic laser-cluster experiments.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Third Harmonic Generation Enhanced By Defective Plasma Bragg Gratings

Plasma Bragg grating is composed of periodic variations of plasma and dielectric or vacuum. The characteristic of the bandgap of the plasma Bragg grating without or with defect is studied by theory and particle-in-cell (PIC) simulation. A one-dimensional (1D) defective plasma Bragg grating is proposed to increase the conversion efficiency of the third harmonic of the incident laser pulse as compared with a simple plane target. In such a structure, the high laser field intensity and high plasma density are produced by laser localization in defect states, from which the third harmonic is enhanced by one order of magnitude.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Dedicated Laboratory Setup for CO{sub 2} TEA Laser Propulsion Experiments at Rensselaer Polytechnic Institute

Laser propulsion research progress has traditionally been hindered by the scarcity of photon sources with desirable characteristics, as well as integrated specialized flow facilities in a dedicated laboratory environment. For TEA CO{sub 2} lasers, the minimal requirements are time-average powers of >100 W), and pulse energies of >10 J pulses with short duration (e.g., 0.1 to 1 {mu}s); furthermore, for the advanced pulsejet engines of interest here, the laser system must simulate pulse repetition frequencies of 1-10 kilohertz or more, at least for two (carefully sequenced) pulses. A well-equipped laser propulsion laboratory should have an arsenal of sensor and diagnostics tools (such as load cells, thrust stands, moment balances, pressure and heat transfer gages), Tesla-level electromagnet and permanent magnets, flow simulation facilities, and high-speed visualization systems, in addition to other related equipment, such as optics and gas supply systems. In this paper we introduce a cutting-edge Laser Propulsion Laboratory created at Rensselaer Polytechnic Institute, one of the very few in the world to be uniquely set up for beamed energy propulsion (BEP) experiments. The present BEP research program is described, along with the envisioned research strategy that will exploit current and expanded facilities in the near future.

47 OTHER INSTRUMENTATION↗

Resonant spontaneous bremsstrahlung by an electron scattered by a nucleus in the field of a pulsed light wave

Resonant spontaneous bremsstrahlung by an electron scattered by a nucleus in the field of a pulsed light wave is theoretically investigated. The approximation is examined when the pulse width is considerably greater than the characteristic time of wave oscillations. The electron interaction with the Coulomb potential of a nucleus is considered in the Born approximation. An analytic expression for the resonant differential cross section of the investigated process was obtained for the range of moderately strong fields. The bremsstrahlung cross section contains a resonant peak. The resonant peak's altitude and width are defined by the external pulsed wave properties. The resonant cross section is studied within the ranges of nonrelativistic, relativistic, and ultrarelativistic electron energies. It is demonstrated that the resonant cross section of spontaneous bremsstrahlung may be several orders of magnitude greater than the corresponding cross section in the absence of an external field. Results obtained may be experimentally verified, for example, by the scientific facilities at the SLAC National Accelerator Laboratory.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Damage Mechanisms In Polymers Upon NIR Femtosecond Pulse Laser Irradiation: Sub-Threshold Processes And Their Implications For Laser Safety Applications

This contribution investigates laser-induced damage of thin film and bulk polymer samples, with the focus on physical processes occurring close to the damage threshold. In-situ real-time reflectivity (RTR) measurements with picosecond (ps) and nanosecond (ns) temporal resolution were performed on thin polymer films on a timescale up to a few microseconds ({mu}s). A model for polymer thin film damage is presented, indicating that irreversible chemical modification processes take place already below the fluence threshold for macroscopic damage. On dye-doped bulk polymer filters (as used for laser goggles), transmission studies using fs-and ps-laser pulses reveal the optical saturation behavior of the material and its relation to the threshold of permanent damage. Implications of the sub-threshold processes for laser safety applications will be discussed for thin film and bulk polymer damage.

36 MATERIALS SCIENCE↗