Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Diffractive production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Mechanochemical reactions and hydrogen storage capacities in MBH 4 –SiS 2 systems (M=Li or Na)

The hydrogen storage properties, and phase compositions of mechanochemically prepared mixtures of xMBH 4 -SiS 2 (x = 2–8), where M = Li or Na, were investigated using gas sorption analysis, powder X-ray diffraction, and infrared and solid-state NMR spectroscopic methods. The 2LiBH 4 :1SiS 2 system forms an amorphous product that releases ca. 4.3 wt % of H 2 below 385 °C with a T onset of 88 °C without detectable diborane emission. The dehydrogenated sample reversibly absorbs 1.5 wt % of H 2 at 385 °C under 160 bar pressure. The H 2 release from materials with varying LiBH 4 :SiS 2 ratios peaks at 8.2 wt % for the 6LiBH 4 :1SiS 2 composition, with a reversible hydrogen storage capacity of 2.4 wt %. The H 2 desorption capacities of the Li-containing systems surpass those of Na-containing systems. Solid-state NMR studies indicate that products of mechanochemical reactions in the LiBH 4 SiS 2 system consist of one-dimensional chains of edge-sharing SiS 4/2 tetrahedra in which the non-bridging S-ends are terminated with Li + , which are further coordinated to the [BH 4 ] – anions. Here, a variety of possible polymorphs in the Li—Si—S-(BH 4 ) composition space have been identified using first principles and thermodynamic modeling that supports the likelihood of formation of such novel complexes.

08 HYDROGEN↗

Synthesis, network structure and morphology of s-triazine-organosilane glassy hybrid materials

A series of five hybrid materials are synthesized by the reaction of cyanuric chloride (C{sub 3}N{sub 3}Cl{sub 3}) with different alkoxysilanes (R{sub x}Si(OC{sub 2}H{sub 5}){sub 4-x}, R=CH{sub 3}, C{sub 6}H{sub 5} and x=0, 1, 2) in ethanol using sol-gel technique. The resulting s-triazine-organosilane products were examined using spectroscopic (UV-visible, FT-IR), thermal (thermogravimetric analysis, TGA), powder X-ray diffraction (P-XRD), BET analysis and microscopic (scanning electron microscopy, SEM) techniques. These hybrid materials exhibit globular and two-dimensional morphological textures with varying degrees of crystalline microstructures. Depending on the functionality of the organosilane building blocks the obtained hybrid materials exhibit different material characteristics including their solid state, Vicat softening point (Vicat hardness), density and porosity. BET surface area measurements indicate that these materials possess small specific surface areas of 0.36-2.3 m{sup 2}/g with external surface area of approx0.02 m{sup 2}/g. The phenyl-containing hybrids exhibit pronounced hydrolytic stability compared to the methyl- and silica-based analogs. The DMSO and sulfolane solutions of the prepared hybrids are transparent to visible light whereas their cold-compressed discs are optically opaque. - Graphical abstract: Network structure of s-triazine-organosilane glassy hybrid materials.

36 MATERIALS SCIENCE↗

Assembling supramolecular networks by halogen bonding in coordination polymers driven by 5-bromonicotinic acid

A series of six coordination compounds ([Zn(5-Brnic){sub 2}]·1.5H{sub 2}O){sub n} (1), [Cd(5-Brnic){sub 2}]{sub n} (2), [Co(5-Brnic){sub 2}(H{sub 2}O){sub 2}]{sub n} (3), [Zn(5-Brnic){sub 2}(H{sub 2}biim)]{sub n} (4), ([Cd(5-Brnic){sub 2}(phen)]·H{sub 2}O){sub n} (5), and [Pb(5-Brnic){sub 2}(phen)] (6) have been generated by the hydrothermal method from the metal(II) nitrates, 5-bromonicotinic acid (5-BrnicH), and an optional ancillary 1,10-phenanthroline (phen) or 2,2′-biimidazole (H{sub 2}biim) ligand. All the products 1–6 have been characterized by IR spectroscopy, elemental, thermal, powder and single-crystal X-ray diffraction analyses. Their 5-bromonicotinate-driven structures vary from the 3D metal-organic framework with the seh-3,5-P21/c topology (in 2) and the 2D interdigitated layers with the sql topology (in 1 and 3), to the 1D chains (in 4 and 5) and the 0D discrete monomers (in 6). The 5-bromonicotinate moiety acts as a versatile building block and its tethered bromine atom plays a key role in reinforcing and extending the structures into diverse 3D supramolecular networks via the various halogen bonding Br⋯O, Br⋯Br, and Br⋯π interactions, as well as the N–H⋯O and C–H⋯O hydrogen bonds. The obtained results demonstrate a useful guideline toward engineering the supramolecular architectures in the coordination network assembly under the influence of various halogen bonding interactions. The luminescent (for 1, 2, 4, 5, and 6) and magnetic (for 3) properties have also been studied and discussed in detail. - Graphical abstract: Six coordination compounds driven by 5-bromonicotinic acid have been generated and structurally characterized, revealing diverse metal-organic networks that are further reinforced and extended via various halogen bonding interactions. - Highlights: • 5-Bromonicotinic acid is a versatile ligand for Zn, Cd, Co and Pb derivatives. • Careful selection of co-ligands and metals resulted in different network structures. • Halogen and hydrogen bonding interactions lead to various supramolecular networks. • Luminescent and magnetic properties were studied and discussed in detail.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis of α-Fe{sub 2}O{sub 3}@ porous hollow yeast-based carbonaceous microspheres for fluorescent whitening agent-VBL wastewater treatment

Porous hollow carbonaceous microspheres (PHCMs) fabricated from yeast cells by hydrothermal treatment have stimulated interest because of their outstanding chemical and physical properties. Herein, the functionalizations of PHCMs by further coating of α-Fe{sub 2}O{sub 3} nanoparticles onto the surface were carried out. The structure of resulted α-Fe{sub 2}O{sub 3}@PHCMs products were characterized by field emission scanning electron microscopy (FE-SEM), energy dispersive spectrometry (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), and BET specific surface area measurements (BET), respectively. Its promising application was evaluated by the Fenton-like degradation of fluorescent whitening agent-VBL from aqueous solutions. - Graphical abstract: In this work, novel α-Fe{sub 2}O{sub 3}@porous hollow carbonaceous microspheres (α-Fe{sub 2}O{sub 3}@PHCMs) were synthesized through a combination of hydrothermal method and calcinations route and achieved excellent removal efficiency for fluorescent whitening Agent-VBL. - Highlights: • The hybrid α-Fe{sub 2}O{sub 3}@ porous hollow microspheres (PHCMs) were firstly fabricated. • The formation mechanism of α-Fe{sub 2}O{sub 3}@PHCMs microspheres was proposed and verified. • Dithizone played a key role in the synthesis of α-Fe{sub 2}O{sub 3}@PHCMs composites. • A favorable removal for the fluorescent whitening agent-VBL were achieved.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Effects of strain rate on mechanical properties and deformation behavior of an austenitic Fe-25Mn-3Al-3Si TWIP-TRIP steel

The effects of quasi-static and low-dynamic strain rate (ε = 10 –4 /s to ε = 10 2 /s) on tensile properties and deformation mechanisms were studied in a Fe-25Mn-3Al-3Si (wt%) twinning and transformation-induced plasticity [TWIP-TRIP] steel. The fully austenitic microstructure deforms primarily by dislocation glide but due to the room temperature stacking fault energy [SFE] of 21 ± 3 mJ/m 2 for this alloy, secondary deformation mechanisms such as mechanical twinning (TWIP) and epsilon martensite formation (TRIP) also play an important role in the deformation behavior. The mechanical twins and epsilon-martensite platelets act as planar obstacles to subsequent dislocation motion on non-coplanar glide planes and reduce the dislocation mean free path. A high-speed thermal camera was used to measure the increase in specimen temperature as a function of strain, which enabled the use of a thermodynamic model to predict the increase in SFE. The influence of strain rate and strain on microstructural parameters such as the thickness and spacing of mechanical twins and epsilon-martensite laths was quantified using dark field transmission electron microscopy, electron channeling contrast imaging, and electron backscattered diffraction. The effect of sheet thickness on mechanical properties was also investigated. Increasing the tensile specimen thickness increased the product of ultimate tensile strength and total elongation, but had no significant effect on uniform elongation or yield strength. The yield strength exhibited a significant increase with increasing strain rate, indicating that dislocation glide becomes more difficult with increasing strain rate due to thermally-activated short-range barriers. Finally, a modest increase in ultimate tensile strength and minimal decrease in uniform elongation were noted at higher strain rates, suggesting adiabatic heating, slight changes in strain-hardening rate and observed strain localizations as root causes, rather than a significant change in the underlying TWIP-TRIP mechanisms at low values of strain.

36 MATERIALS SCIENCE↗

Influence of thermal treatment time on structural and physical properties of polyimide films at beginning of carbonization

Poly(4,4'-oxydiphenylene-oxydiphthalimide) (POO) was thermally treated at 773 K for 1, 15 and 60 min under argon atmosphere resulting in free-standing films with intermingled characteristics between polymer and carbon-rich derivatives. Degradative thermal analysis performed by pyrolysis-gas chromatography/mass spectroscopy (Py-GC/MS) revealed CO 2 among the major products of thermal decomposition which according to electron paramagnetic resonance (EPR) passed through a radical process. X-ray diffraction (XRD) revealed thermal treated samples with semicrystalline organization that was attributed to the development of lamellae structure. Moreover, Atomic force microscopy (AFM) showed an increase in the roughness of the samples that acquired pronounced roughcast-like surface. Hence, there was an enhancement of mechanical strength and dielectric permittivity. From the data collected a mechanism of thermal decomposition was proposed.

36 MATERIALS SCIENCE↗

Combustion of Silane-Hydrogen-Nitrous oxide Mixtures: Analysis of Laminar Flame Propagation and Condensed Products

The laminar burning rate, the explosion pressure, and the pressure rise coefficient have been measured for silane-nitrous oxide-argon mixtures using the spherically expanding flame technique in a constant volume combustion chamber. For these three parameters, the values obtained were higher than for hydrogen-nitrous oxide-argon and typical hydrocarbon-based mixtures. As an example, a maximum burning rate of 1800 g/m 2 s was measured at 101 kPa, whereas under similar conditions, a maximum burning rate around 950 g/m 2 s has been reported for hydrogen-nitrous oxide-argon mixtures. Here, the condensed combustion products formed in the silane-nitrous oxide-argon flames were sampled and characterized using electron micrograph, electronic diffraction, energy-dispersive spectroscopy, and X-ray powder diffraction. For all equivalence ratios, silica spherical particles with a mean diameter in the range 200-300 nm were observed. In addition, for mixtures with Φ ≥2.2, silicon nanowires were formed. X-ray diffraction experiments showed that the silicon nanowires are composed of a material referred to as “metal silicon” characterized by a cubic structure (lattice parameter: a = 5.425 Å) with the Fm-3m space group.

42 ENGINEERING↗

Radiation-Induced Long-Lived Transients and Metal Particle Formation in Solid KCl–MgCl 2 Mixtures

Here, the electron paramagnetic resonance and diffuse reflectance-optical absorption spectra of room-temperature γ-irradiated KCl–MgCl 2 binary solid salt mixtures (98:2 mol % and 2:98 mol %) and the eutectic (68:32 mol %) are reported. Additionally, powder X-ray diffraction of the pristine salts and thermal annealing studies of the irradiated salts were performed to evaluate the radiolysis product stability, annihilation, and association in metallic particles. The main long-lived transient species detected in 98:2 mol % KCl–MgCl 2 salts were perturbed F-centers, that is, trapped electrons (e t – ) in the vicinity of Mg ions (λ max at 561 nm), and the radiolytic reduction of Mg 2+ to Mg + and Mg 0 . Thermal annealing promoted the diffusion of defects to yield polycations (Mg n + ). On the other hand, irradiation of 2:98 mol % KCl/MgCl 2 salts showed the formation of cationic and neutral Mg dimers (Mg 2 + and Mg 2 ) and trimers as well as centers with a rhombic powder pattern apparently consisting of an electron shared between three Mg 2+ nuclei associated with an anion vacancy (ν a + –Mg 3 5+ ). Trapped electrons (e t – ) (F-centers) were not observed in the irradiated eutectic mixture; instead, Mg 2 , Mg 0 , and Cl 3 – were observed. It was observed that the higher temperature for thermal ionization of radiation-reduced Mg species decreased the extent of electron recombination reactions and the disproportionation of Cl 3 – compared to the pure KCl but enhanced the aggregation of Mg into larger metallic microstructures (metallic particles).

36 MATERIALS SCIENCE↗

Intense Reactivity in Sulfur–Hydrogen Mixtures at High Pressure under X-ray Irradiation

Superconductivity near room temperature in the sulfur–hydrogen system arises from a sequence of reactions at high pressures, with X-ray diffraction experiments playing a central role in understanding these chemical–structural transformations and the corresponding S:H stoichiometry. Here we document X-ray irradiation acting as both a probe and as a driver of chemical reaction in this dense hydride system. We observe a reaction between molecular hydrogen (H 2 ) and elemental sulfur (S 8 ) under high pressure, induced directly by X-ray illumination, at photon energies of 12 keV using a free electron laser. The rapid synthesis of hydrogen sulfide (H 2 S) at 0.3 GPa was confirmed by optical observations, spectroscopic measurements, and microstructural changes detected by X-ray diffraction. These results document X-ray induced chemical synthesis of superconductor-forming dense hydrides, revealing an alternative production strategy and confirming the disruptive nature of X-ray exposure in studies on high-pressure hydrogen chalcogenides, from water to high-temperature superconductors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A facile arrested precipitation method for synthesis of pure wurtzite Cu{sub 2}ZnSnS{sub 4} nanocrystals using thiourea as a sulfur source

Graphical abstract: High-resolution TEM image of wurtzite Cu{sub 2}ZnSnS{sub 4} nanocrystals. Highlights: ► Wurtzite Cu{sub 2}ZnSnS{sub 4} nanocrystals were synthesized by arrested precipitation method. ► XRD, EDX, TEM demonstrate that the CZTS nanocrystals are purely wurtzite structure. ► The average diameter of the bulk CZTS products is found to be 10 ± 1.1 nm. ► The estimated direct bandgap energy is 1.56 eV for wurtzite CZTS nanocrystals. ► The electrical resistivity of the wurtzite CZTS nanocrystals is low. -- Abstract: A facile route for the synthesis of wurtzite Cu{sub 2}ZnSnS{sub 4} (CZTS) nanocrystals was developed by an arrested precipitation method at 240 °C under simple reaction conditions with diethanolamine as the solvent and thiourea as sulfur source. The structure and morphology of the CZTS nanocrystals were characterized by X-ray diffraction and transmission electron microscopy. Control experiments demonstrated that CZTS nanocrystals which are purely wurtzite structure are readily obtained. The average diameter of the bulk CZTS products is found to be 10 ± 1.1 nm. The estimated direct bandgap energy is 1.56 eV, which indicates that the CZTS nanocrystals produced by this method possess promising applications in photovoltaic devices.

36 MATERIALS SCIENCE↗

Degradation of CYANEX 301 in Contact with Nitric Acid Media

The nature of the degradation product obtained upon contacting CYANEX 301 (bis(2,4,4-trimethylpentyl)dithiophosphinic acid) with nitric acid has been elucidated and found to be a disulfide derivative. The first step to the degradation of CYANEX 301 in toluene has been studied using 31P{1H} NMR after being contacted with nitric acid media. The spectrum of the degradation product exhibits a complex multiplet around dP = 80 ppm. A succession of purifications of CYANEX 301 has resulted in single crystals of the acidic form and the corresponding ammonium salt. Unlike the original CYANEX 301, which consists of a complex diastereomeric mixture displaying all possible combinations of chiral orientations at the 2-methyl positions, the purified crystals were shown by single-crystal X-ray diffraction to be racemates, containing 50:50 mixtures of the [R;R] and [S;S] diastereomers. The comparison between the 31P {1H} NMR spectra of the degradation products resulting from the diastereomerically pure CYANEX 301 and the original diastereomeric mixture has elucidated the influence of the isomeric composition on the multiplicity of the 31P {1H} NMR peak. These NMR data indicate the initial degradation leads to a disulfide-bridged condensation product displaying multiple resonances due to phosphorus–phosphorus coupling, which is caused by the inequivalence of the two P atoms as a result of their different chirality. A total of nine different NMR resonances, six of which display phosphorus–phosphorus coupling, could be assigned, and the identity of the peaks corresponding to phosphorus atoms coupled to each other was confirmed by 31P {1H} homodecoupled NMR analysis.

99 GENERAL AND MISCELLANEOUS↗

Anomalous photon-gauge boson coupling contribution to the exclusive vector boson pair production from two photon exchange in pp collisions at 13 TeV

We study the W and Z pair production from two-photon exchange in proton-proton collisions at the LHC in order to evaluate the contributions of anomalous photon-gauge boson couplings, that simulates new particles and couplings predicted in many Standard Model (SM) extensions. The experimental results of W{sup +} W{sup −} exclusive production (pp → pW{sup +}W{sup −} p) at 7 TeV from the CMS collaboration [1] updates the experimental limits on anomalous couplings obtained at the Large Electron-Positron Collider (LEP). This motivates our present analysis hopefully anticipating the expected results using the Precision Proton Spectrometer (PPS) to be installed as part of CMS. In this work, we consider the W{sup +}W{sup −} exclusive production to present the p{sub T} distribution of the lepton pair corresponding to the SM signal with p{sub T} (e, μ) > 10 GeV. Next, we consider the photon-gauge boson anomalous couplings by calculating, from the FPMC and MadGraph event generators, the process γγ → W{sup +}W{sup −} from a model with gauge boson quartic couplings, by considering a 1 TeV scale for new physical effects. We present our results for an integrated luminosity of 5 fb{sup −1} at center-of-mass energy of 7 TeV and for an integrated luminosity of 100 fb{sup −1} at 13 TeV. We present our preliminary results for Z pair exclusive production from two-photon exchange with anomalous couplings, where the ZZγγ quartic coupling is absent in the SM. We calculate the total cross section for the exclusive process and present the four lepton invariant mass distribution. Finally we present an outlook for the present analysis.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Designing and optimizing highly efficient grating for high-brightness laser based on spectral beam combining

A highly efficient nano-periodical grating is theoretically investigated for spectral beam combining (SBC) and is experimentally implemented for attaining high-brightness laser from a diode laser array. The rigorous coupled-wave analysis with the S matrix method is employed to optimize the parameters of the grating. According the optimized parameters, the grating is fabricated and plays a key role in SBC cavity. The diffraction efficiency of this grating is optimized to 95% for the output laser which is emitted from the diode laser array. The beam parameter product of 3.8 mm mrad of the diode laser array after SBC is achieved at the output power of 46.3 W. The optical-to-optical efficiency of SBC cavity is measured to be 93.5% at the maximum operating current in the experiment.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Crystal growth and structural investigation of A{sub 2}BReO{sub 6} (A=Sr, Ba; B=Li, Na)

Single crystals of the double perovskite rhenates A{sub 2}BReO{sub 6} (A=Sr, Ba; B=Li, Na) were grown out of molten hydroxide fluxes. Single crystals of orange/yellow Ba{sub 2}LiReO{sub 6}, Ba{sub 2}NaReO{sub 6} and Sr{sub 2}LiReO{sub 6} were solved in the cubic, Fm-3m space group with a=8.1214(11) A, 8.2975(3) A, and 7.9071(15) A, respectively, while Sr{sub 2}NaReO{sub 6} was determined to be monoclinic P2{sub 1}/n with a=5.6737(6) A, b=5.7988(6) A, c=8.0431(8) A, and {beta}=90.02(6){sup o}. The cubic structure consists of a rock salt lattice of corner-shared ReO{sub 6} and MO{sub 6} (M=Li, Na) octahedra which, in the monoclinic structure, are both tilted and rotated. A discrepancy exists between the symmetry of Sr{sub 2}LiReO{sub 6} indicated by the single-crystal refinement of flux-grown crystals (cubic, Fm-3m) and the symmetry indicated by the powder diffraction data collected on polycrystalline samples prepared by the ceramic method (tetragonal, I4/m). It is possible that the cubic crystals are a kinetic product that forms in small quantities at low temperatures, while the powder represents the more stable polymorph that forms at higher reaction temperature. - Graphical abstract: Single-crystal structure analyses of double perovskite rhenates, Sr{sub 2}LiReO{sub 6}, Ba{sub 2}LiReO{sub 6} and Ba{sub 2}NaReO{sub 6} indicate cubic symmetry while that of Sr{sub 2}NaReO{sub 6} shows monoclinic symmetry.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Analysis of surface integrity of grinded gears using Barkhausen noise analysis and x-ray diffraction

The contribution is focused to present results of study grinded gears made of 18CrNiMo7-6 steel used in the wind power plant for support (service) purposes. These gears were case-hardened due to standard hard case and soft core formation. This heat treatment increases wear resistance and fatigue strength of machine parts. During serial production some troubles with surface integrity have occurred. When solving complex problems lots of samples were prepared. For grinding of gears were used different parameters of cutting speed, number of material removal and lots from different subsuppliers. Material characterization was carried out using Barkhausen noise analysis (BNA) device; X-ray diffraction (XRD) measurement of surface residual stresses was done as well. Depth profile of measured characteristics, e.g. magnetoelastic parameter and residual stress was obtained by step by step layers' removing using electrolytic etching. BNA software Viewscan was used to measure magnetizing frequency sweep (MFS) and magnetizing voltage sweep (MVS). Scanning of Magnetoelastic parameter (MP) endwise individual teeth were also carried out with Viewscan. These measurements were done to find problematic surface areas after grinding such as thermal damaged locations. Plots of the hardness and thickness of case-hardened layer on cross sections were measurered as well. Evaluation of structure of subsurface case-hardened layer and core was made on etched metallographic patterns. The aim of performed measurements was to find correlation between conditions of grinding, residual stresses and structural and magnetoelastic parameters. Based on correlation of measured values and technological parameters optimizing the production of gears will be done.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Regenerated silica gel as stationary phase on vacuum column chromatography to purify temulawak’s extracts

Commercial silica gel only used once by many researchers and affected high cost for purification process, also less support the green chemistry program. This research focused in regeneration silica gel that used purification of temulawak’s extracts (Curcuma xanthorrhiza Roxb) by vacuum column chromatography. Sample extracts (contains 10.1195±0.5971% of curcuminoids) was purified by vacuum column chromatography (pressure: 45 kPa, column: 100mm on length and 16mm on diameter). Ethanol 96% and acetone were compared as eluent. The amount of solvent and yield of curcuminoids used as indicator purification. The silica gel was regenerated with heating in 600°C for 8 hours The silica gels were analyzed by IR spectroscopy and X-ray diffraction. Furthermore, regenerated silica gel was used as the stationary phase in vacuum column chromatography under the same conditions with the previous purification. All the purification experiments were performed in three repetitions. Based on regression equation, y=0.132x+0.0011 (r{sup 2}=0.9997) the yield of curcuminoids on purified products using ethanol as the eluent was improved 4.26% (to 14.3724±0.5749%) and by acetone was improved 3,03% (to 13.1450 ±0.6318%). The IR spectrum of both silica gel showed the same vibration profile and also there were three crystallinity peaks missing on its X-ray diffraction. Regenerated silica gel has the same performance with new silica gel in purification of temulawak’s extract: by ethanol has increased 4.08% (14.1947±0.7415%) and 2.93% (13.0447±0.4822) by acetone. In addition, all purification products showed similar TLC profiles. Purification using regenerated silica gel as the adsorbent on vacuum column chromatography has exactly same potential with the new silica gel.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Imaging single electrons to enable the generation of ultrashort beams for single-shot femtosecond relativistic electron diffraction

The generation and control of relativistic electron beams well suited for ultrafast electron diffraction application has rapidly advanced, greatly benefiting from the overlap in techniques and expertise with the accelerator community. However, imaging the diffracted MeV electrons with high detection efficiency has remained an under-explored area. In this paper, we report on a quantitative study of the imaging of MeV electrons using a detection system consisting of a phosphor screen, a lens-coupling optics, and a charge-coupled device camera. It is shown that every MeV electron in the beam yields a signal well above the camera noise. With this detection efficiency, only {approx}10{sup 5} electrons per pulse are needed to obtain a high quality single-shot diffraction pattern from a crystalline sample. We measured that such a low charge beam can be as short as 30 fs rms. Further, we discuss the possibility of compressing these electron beams to sub-5 fs rms bunch length by velocity bunching using a short high gradient rf accelerating structure scheduled to be installed next year at the UCLA Pegasus Laboratory. This opens the possibility of single-shot determinations of structural changes in many ultrafast physical processes like nonequilibrium phonon dynamics or relaxation pathways in systems with strong electron-phonon coupling.

43 PARTICLE ACCELERATORS↗