Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Density matrix”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2022

Experimental Characterization of Hygrothermal Aging: Competition Between Thermo-Oxidation and Hydrolysis Phenomena

Abstract In this work, we have presented a comparison between effects of accelerated thermo-oxidative, hydrolytic and hygrothermal aging on the mechanical and chemical properties of a polyurethane based (PUB) adhesive. The adhesive is a flexible adhesive which is extensively used in automobile industry as a glass sealant. During service life it gets exposed to the hygrothermal environment and the integrity of matrix interface is most vulnerable. This study focuses on weighing and comparing effects of different aging environments on material behavior; and it shows that hygrothermal aging environment results as a competition between two sub-aging phenomena i.e., thermo-oxidation and hydrolytic aging. Samples were exposed to 0%RH, 80%RH and submerged condition in distilled water. Uni-axial tensile tests, and cross-link density analysis by swelling test were carried out on as-received and aged samples. The aging process was conducted at three different temperatures (60°C, 80°C and 95°C) and for four different exposure durations of 1, 10, 30, and 90 days. This work confirms that the effect of hygrothermal aging is a result of competition between thermo-oxidation and hydrolytic aging environments. The total mechanical and environmental damage incurred by specimens is a collaborative effect of all exposure environments involved i.e., aging time, temperature, oxygen, water and humidity. The results are in agreement with the chemical test outcomes as well.

Shaafaey, Mamoon↗
DOE OSTI2024

Neutrino oscillations in matter using the adjugate of the Hamiltonian

We revisit neutrino oscillations in constant matter density for a number of different scenarios: three flavors with the standard Wolfenstein matter potential, four flavors with standard matter potential and three flavors with non-standard matter potentials. To calculate the oscillation probabilities for these scenarios one must determine the eigenvalues and eigenvectors of the Hamiltonians. We use a method for calculating the eigenvalues that is well known, determination of the zeros of determinant of matrix (λI - H), where H is the Hamiltonian, I the identity matrix and λ is a scalar. To calculate the associated eigenvectors we use a method that is little known in the particle physics community, the calculation of the adjugate (transpose of the cofactor matrix) of the same matrix, (λI - H). This method can be applied to any Hamiltonian, but provides a very simple way to determine the eigenvectors for neutrino oscillation in matter, independent of the complexity of the matter potential. This method can be trivially automated using the Faddeev–LeVerrier algorithm for numerical calculations. For the above scenarios we derive a number of quantities that are invariant of the matter potential, many are new such as the generalization of the Naumov–Harrison–Scott identity for four or more flavors of neutrinos. We also show how these matter potential independent quantities become matter potential dependent when off-diagonal non-standard matter effects are included.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2019

VeloxChem: A Python-driven density-functional theory program for spectroscopy simulations in high-performance computing environments

An open-source program named VeloxChem has been developed for the calculation of electronic real and complex linear response functions at the levels of Hartree–Fock and Kohn–Sham density functional theories. With an object-oriented program structure written in a Python/C++ layered fashion, VeloxChem enables time-efficient prototyping of novel scientific approaches without sacrificing computational efficiency, so that molecular systems involving up to and beyond 500 second-row atoms (or some 10,000 contracted and in part diffuse Gaussian basis functions) can be routinely addressed. In addition, VeloxChem is equipped with a polarizable embedding scheme for the treatment of the classical electrostatic interactions with an environment that in turn is modeled by atomic site charges and polarizabilities. The underlying hybrid message passing interface (MPI)/open multiprocessing (OpenMP) parallelization scheme makes VeloxChem suitable for execution in high-performance computing cluster environments, showing even slightly beyond linear scaling for the Fock matrix construction with use of up to 16,384 central processing unit (CPU) cores. An efficient—with respect to convergence rate and overall computational cost—multifrequency/gradient complex linear response equation solver enables calculations not only of conventional spectra, such as visible/ultraviolet/X-ray electronic absorption and circular dichroism spectra, but also time-resolved linear response signals as due to ultra-short weak laser pulses.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2020

Enhanced Electron-Phonon Coupling for Charge-Density-Wave Formation in La 1.8-$x$ Eu 0.2 Sr $x$ CuO 4+$δ$

Charge density wave (CDW) correlations are prevalent in all copper-oxide superconductors. While CDWs in conventional metals are driven by coupling between lattice vibrations and electrons, the role of the electron-phonon coupling (EPC) in cuprate CDWs is strongly debated. Using Cu L 3 edge resonant inelastic x-ray scattering, we study the CDW and Cu-O bond-stretching phonons in the stripe-ordered cuprate La 1.8-x Eu 0.2 Sr x CuO 4+δ . In this work, we investigate the interplay between charge order and EPC as a function of doping and temperature and find that the EPC is enhanced in a narrow momentum region around the CDW ordering vector. By detuning the incident photon energy from the absorption resonance, we extract an EPC matrix element at the CDW ordering vector of M ≃ 0.36 eV , which decreases to M ≃ 0.30 eV at high temperature in the absence of the CDW. Our results suggest a feedback mechanism in which the CDW enhances the EPC which, in turn, further stabilizes the CDW.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2022

Weyl semimetal in the rare-earth hexaboride family supporting a pseudonodal surface and a giant anomalous Hall effect

Rare-earth hexaborides offer a rich tapestry for exploring the interplay of topological orders, magnetism, and electron-correlation effects associated with protected quantum phenomena. Using first-principles modeling, we identify in cerium hexaboride (CeB 6 ) a topological state that harbors a pseudonodal surface (PNS) along with double-Weyl fermions. An analysis of the electronic states in the vicinity of the Fermi level reveals the presence of M z -mirror-symmetry-protected band crossings that involve itinerant (d) and localized (f) states of Ce. These band crossings are found to remain nearly gapless as one goes away from the mirror plane, driving the formation of PNS states. We also demonstrate the presence of coexisting double-Weyl fermions with chiral charges of ±2 on the C 4z rotational axis. By analyzing the Berry curvature field associated with the topological states, we predict that CeB 6 supports a giant anomalous Hall conductivity of -1840Ω -1 cm -1 in the slightly electron-doped regime, which would be larger than the values reported to date in magnetic Weyl semimetals. Our study thus indicates that CeB 6 , which combines ferromagnetic order with topological physics in a heavy-fermion matrix, would provide a promising playground for investigating topological magnetic states with giant anomalous Hall responses.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Triaxiality and shape dynamics in 70 Ge

The electromagnetic properties of low-lying states in 70 Ge were investigated via multi-step Coulomb excitation of a 70 Ge beam impinging on a 208 Pb target at the ATLAS facility of the Argonne National Laboratory. A total of 27 transitional elements and six diagonal matrix elements coupling 11 low-lying states, were extracted from the measured cross sections. These were used to calculate reduced transition probabilities, spectroscopic quadrupole moments, and rotational invariant shape parameters, providing enhanced precision and expanding on previous studies. The experimental data were compared within several theoretical frameworks, including the generalized triaxial rotor model, configuration interaction shell-model calculations, and computations within the combined frameworks of relativistic density functional theory and the five-dimensional collective Hamiltonian. The results demonstrate a good agreement with the experimental data and, in conjunction with calculations using a two-state mixing model, support significant triaxiality and strong mixing between the 0$^{+}_{1}$ and 0$^{+}_{2}$ states. This results in the magnitudes of their respective quadrupole deformations [β rms (0$^{+}_{1}$) = 0.228 (3), β rms (0$^{+}_{2}$) = 0.273 (1)] being more similar than previously observed. Furthermore, the implications of these results for understanding the complex shape coexistence phenomena, the role of triaxiality, and shape evolution along the Ge isotopic chain are discussed.

59 ≤ A ≤ 89↗
DOE OSTI2021

A Graded, Porous Composite of Natural Biopolymers and Octacalcium Phosphate Guides Osteochondral Differentiation of Stem Cells

Abstract Lesions involving the osteochondral unit are difficult to treat. Biomimetic scaffolds are previously shown as promising alternative. Such devices often lack multiple functional layers that mimic bone, cartilage, and the interface. In this study, multilayered scaffolds are developed based on the use of natural extracellular matrix (ECM)‐like biopolymers. Particular attention is paid to obtain a complex matrix that mimics the native osteochondral transition. Porous, sponge‐like chitosan‐collagen‐octacalcium phosphate (OCP) scaffolds are obtained. Collagen content increases while the amount of OCP particles decreases toward the cartilage layer. The scaffolds are bioactive as a mineral layer is deposited containing hydroxyapatite at the bony side. The scaffolds stimulate proliferation of human adipose‐derived mesenchymal stem cells, but the degree of proliferation depends on the cell seeding density. The scaffolds give rise to a zone‐specific gene expression. RUNX2, COL1A1, BGLAP, and SPP1 are upregulated in the bony layer of the scaffold. SOX9 is upregulated concomitant with COL2A1 expression in the cartilage zone. Mineralization in presence of the cells is prominent in the bone area with Ca and P steadily increasing over time. These results are encouraging for the fabrication of biomimetic scaffolds using ECM‐like materials and featuring gradients that mimic native tissues and their interface.

Amann, Elisabeth↗
DOE OSTI2020

Synthesis of precipitation-strengthened Al-Sc, Al-Zr and Al-Sc-Zr alloys via selective laser melting of elemental powder blends

Selective laser melting is used to create Al-1.5Sc, Al-1.5Zr and Al-0.75Sc-0.75Zr (at.%) alloys from blends of elemental Al, Sc, and Zr powders. This study investigates elemental alloying elements (Sc and Zr) which are high-melting and highly reactive, unlike previous work which focused on more concentrated elemental additions of lower-melting, lower-reactivity Cu and Si to aluminum. High-speed in situ synchrotron x-ray imaging and diffraction show that the 20–30 μm Al, Sc, and Zr powders fully melt and sufficiently mix in the molten state to create, on solidification, a homogeneous distribution of primary, micron-size L12 precipitates (Al 3 Sc, Al 3 Zr, and Al 3 (Sc,Zr), respectively) and nucleate micron-size Al matrix grains, as confirmed by SEM imaging of cross-sections. Here, a second laser pass, simulating a realistic additive-manufacturing build condition, fully remelts the initial volume which shows, after solidification, the same Al 3 (Sc,Zr) L1 2 primary micro-precipitates and very fine Al grains. After aging at 300–400°C, the alloys show large increases in hardness, consistent with an exceptionally high number density (1.4 × 10 24 m –3 ) and volume fraction (2.5%) of secondary Al 3 (Sc,Zr) nano-precipitates with a Sc-rich core and Zr-rich shell, as measured via atom-probe tomography.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Effects of high-pressure hydrogen exposure on filler-elastomer adhesion

Elastomers are known to gain enhanced mechanical properties through compounding with nanosized filler particles such as silica or carbon black. Filler dispersion and filler-polymer interfacial strength are key contributing factors to this improvement. The interfacial strength is critical to part lifetime in pressurized gas sealing applications such as O-rings, where weak binding between the filler particle and polymer matrix can lead to internal void structures. With the aim to build a fundamental understanding of precursors to pressurized hydrogen-induced failure in elastomers, we use all-atom molecular dynamics simulations to study the impact of hydrogen oversaturation on filler-polymer interaction strength. We systematically study the interface between a commonly used elastomer, ethylene-propylene-diene monomer (EPDM) and silica by varying gas concentration, crosslink density, and surface chemistry. Our simulations predict that decompression leads to a localization of excess gas near the interface. In conclusion, we demonstrate that this localized gas can weaken interfacial adhesion and quantify the interaction using thermodynamic approaches.

EPDM↗
DOE OSTI2023

Polyethylene Blends for Improved Oxygen Barrier: Processing-Dependent Microstructure and Gas Permeability

Here this work demonstrates a greater than expected enhancement of oxygen barrier properties in linear low-density polyethylene (LLDPE)-based materials by blending LLDPE with high-density polyethylene (HDPE). The films made by melt pressing the LLDPE/HDPE blends had a greater reduction in oxygen permeability coefficients (PO 2 ) than predicted using common permeability reduction models, i.e., the harmonic average model and zero-permeability nanofiller model. The reduction of PO 2 was attributed to the presence of spherulite crystal structures, as revealed by atomic force microscopy combined with infrared spectroscopy (AFM-IR). The LLDPE matrix exhibited significant spherulite formation even at a relatively low addition of HDPEs, which likely formed tortuous pathways for diffusing oxygen molecules. Transport results from melt-pressed films contrast with the results from films with similar compositions prepared by film blowing, which did not show barrier enhancement beyond expectation. AFM-IR revealed that the blown films lacked spherulite crystals likely due to stretching in the machine direction followed by rapid cooling. These findings demonstrate the role of processing in controlling microstructures and thus the oxygen barrier performance. This work offers the possibility of achieving easily recyclable LLDPE-based packaging materials by simple blending of polyethylenes with different crystalline content.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Semiclassical treatment of bottomonium suppression and regeneration in 𝑝 + Pb collisions

Here, we study bottomonium suppression in 𝑝 + Pb relative to 𝑝 + 𝑝 collisions at center-of-mass energies of $\sqrt{s_{NN}}$ = 5.02 and 8.16 TeV. Specifically, we combine cold nuclear matter effects (nuclear modifications of the parton densities, energy loss, and momentum broadening) with those from hot nuclear matter (suppression and regeneration) by implementing the formation of a quark-gluon plasma in hydrodynamic simulations. Bottomonium transport in the quark-gluon plasma is evaluated semiclassically, employing two different reaction rates. The first includes quasifree inelastic scattering and gluodissociation employing a perturbative coupling to the medium. The second is based on in-medium 𝑇-matrix calculations where the input potential is constrained by lattice quantum chromodynamics to extract the bottomonium masses and dissociation rates. These semiclassical results are compared to previous calculations in an open quantum system approach and to the experimental data. Predictions for 𝜒 𝑏 suppression at $\sqrt{s_{NN}}$ = 8.16 TeV are also presented.

Physics - Physics of elementary particles and fiel↗
DOE OSTI2022

Behavior of helium cavities in ion-irradiated W-Ni-Fe ductile-phase toughened tungsten

This study reports on the distribution of helium (He) cavities in a hot-rolled W-Ni-Fe ductile-phase toughened tungsten (DPT W) composite irradiated to a dose and a helium concentration that are comparable to those in the material after 5-year irradiation in a conceptual fusion power plant. Here, the DPT W sample consists of W particles embedded in a ductile-phase NiFeW matrix with a nominal composition of 90W-7Ni-3Fe by weight. It was hot-rolled to a thickness reduction by 87% (87R DPT W). Sequential irradiation of the material with 1.2 MeV Ni + ions to a fluence of 2.15×10 16 Ni + /cm 2 and 90 keV He + ions to 6.5×10 15 He + /cm 2 was performed at 973 K. Larger He cavities with a lower number density are observed in NiFeW than W. Helium cavities are aggregated preferentially along the NiFeW/W interphase boundary. This behavior is not observed along the W/W grain boundary under the same irradiation conditions. A similar distribution of He cavities with comparable sizes is observed in 87R DPT W irradiated with He + ions only, suggesting that the He cavity distribution is not significantly affected by pre-irradiation of Ni + ions at 973 K. The data from this study does not provide any evidence for formation of visible voids or Ni precipitates in W phase irradiated with Ni + ions only. Diffusion and clustering of He atoms and mobile vacancies during ion irradiation at 973 K are responsible for the formation and growth of the He cavities.

36 MATERIALS SCIENCE↗
DOE OSTI2021

New insight into strain and composition of BaZrO 3 nanorods in REBCO superconductor

We report on strain and composition effects associated with growth of self-assembled BaZrO 3 (BZO) nanorods in REBa 2 Cu 3 O 7–δ (REBCO) superconductors (RE = rare earth = Y and Gd), which have a profound effect on flux pinning and in-field critical current performance. The a-b plane mismatch between BZO and REBCO is never fully coherently accommodated. Instead, the nanorods always assume a size at least one unit cell smaller than the corresponding 'hole' in the REBCO matrix, thus providing deep minima of in-plane mismatch strain. Next, we show that the nominal BZO nanorods are in fact solid solution Ba 2+ (Zr 4+ 1–z RE 3+ z )O 3–δ perovskite, thus strongly affecting the stoichiometry and relative amounts of REBCO and BZO. We demonstrate that by varying only the Ba content in the nominal composition of 15 mol.% BZO + REBCO, the unit cell density of BZO can be tuned from 5% to 23%, and the linear density of RE 2 O 3 (REO) precipitates from 18 to 1 μm –1 . Furthermore, the results explain the wide range of pinning performances observed for the same nominal amount of Zr addition and provide insight into the mechanisms behind the complex phenomenon of growth of nanorods by self-assembly in REBCO superconductors.

2G-HTS↗
DOE OSTI2021

Insights into Defect-Mediated Nucleation of the Equilibrium B2 Phase in Face-Centered Cubic High-Entropy Alloys

A fine scale second phase distribution is important for strengthening metallic materials. High precipitate density is often difficult to achieve due to sluggish precipitation kinetics and limited nucleation sites. Based on the CALPHAD predictions, transition element-based complex concentrated alloys (CCAs)/ High Entropy Alloys (HEAs), have a highly stable face-centered cubic (FCC) phase and intermetallic B2 phase. The precipitation of the strengthening B2 phase is often limited to low fractions in these alloys due to a high nucleation barrier in the FCC matrix. Here, by illustrating in three different alloys, we present a defect mediated nucleation of a high fraction equilibrium B2 phase. The degree of cold work is used to manipulate the phase fraction, morphology, and distribution of B2 precipitates. Our approach synergistically improves the strength and ductility of these alloys and is widely applicable to many other complex alloys.

Sharma, Abhishek↗
DOE OSTI2022

Efficient machine-learning model for fast assessment of elastic properties of high-entropy alloys

We combined descriptor-based analytical models for stiffness-matrix and elastic-moduli with mean-field methods to accelerate assessment of technologically useful properties of high-entropy alloys, such as strength and ductility. Model training for elastic properties uses Sure-Independence Screening (SIS) and Sparsifying Operator (SO) method yielding an optimal analytical model, constructed with meaningful atomic features to predict target properties. Computationally inexpensive analytical descriptors were trained using a database of elastic properties determined from density functional theory for binary and ternary subsets of Nb-Mo-Ta-W-V refractory alloys. The optimal Elastic-SISSO models, extracted from an exponentially large feature space, give an extremely accurate prediction of target properties, similar to or better than other models, with some verified from existing experiments. Here we also show that electronegativity variance and elastic-moduli can directly predict trends in ductility and yield strength of refractory HEAs, and reveals promising alloy concentration regions.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Bio-inspired redox mediated electrolyte for high performance flexible supercapacitor applications over broad temperature domain

For practical supercapacitors, recent advances in electrolytes have diminished long-standing problems such chemical stability, low ionic conductivity and limited electrochemical performance. Herewith, we communicate a facile method to produce anhydrous redox-active Bio-inspired electrolytes for flexible supercapacitors with application over a broad temperature range. The glycerol (Gly) gel electrolyte consists of various fractions of potassium hydroxide (KOH) and redox active unit, i.e., ammonium molybdate, (NH 4 ) 2 MoO 4 (abbreviated as Mo), in the anhydrous state. The doped glycerol matrix acts as a framework that provides a stable gel electrolyte, forming hierarchical pathway for ion diffusion. The developed gel network with Gly-KOH-MoX (X = 3, 5, 10, and 15%, w/w) provides an effective route to carry the ions onto the pores of the electrodes. The supercapacitor with Gly-KOH5-Mo10 gel provides a specific capacitance of 328 F g –1 , and the same device achieved an energy density of 45.6 Wh kg –1 at a power density of 497 W kg –1 . In addition, the supercapacitor maintained extraordinary cyclic robustness and wide temperature tolerance. Thus, the low cost and environmentally benign, cyclic durability of Gly-KOH-Mo makes these gel electrolytes a potential candidate for use in various energy storage devices.

25 ENERGY STORAGE↗
DOE OSTI2024

Altered post-fracture systemic bone loss in a mouse model of osteocyte dysfunction

Femur fracture leads to loss of bone at uninjured skeletal sites, which may increase risk of subsequent fracture. Osteocytes, the most abundant bone cells, can directly resorb bone matrix and regulate osteoclast and osteoblast activity, but their role in systemic bone loss after fracture remains poorly understood. In this study we used a transgenic (TG+) mouse model that overexpresses human B-cell lymphoma 2 (BCL-2) in osteoblasts and osteocytes. This causes enhanced osteoblast proliferation, followed by disruption in lacunar-canalicular connectivity and massive osteocyte death by 10 wk of age. We hypothesized that reduced viable osteocyte density would decrease the magnitude of systemic bone loss after femur fracture, reduce perilacunar remodeling, and alter callus formation. Bone remodeling was assessed using serum biomarkers of bone formation and resorption at 5 d post-fracture. We used micro-computed tomography, high resolution x-ray microscopy, mechanical testing, and Raman spectroscopy to quantify the magnitude of systemic bone loss, as well as changes in osteocyte lacunar volume, bone strength, and bone composition 2 wk post-fracture. Fracture was associated with a reduction in circulating markers of bone resorption in non-transgenic (TG-) animals. TG+ mice exhibited high bone mass in the limbs, greater cortical elastic modulus and reduced post-yield displacement. After fracture, TG+ mice lost less trabecular bone than TG- mice, but conversely TG+ mice exhibited trends toward a lower yield point and reduced femoral cortical thickness after fracture, though these were not statistically significant. Lacunar density was greater in TG+ mice, but fracture did not alter lacunar volume in TG+ or TG- mice. These findings suggest that osteocytes potentially play a significant role in the post-traumatic systemic response to fracture, though the effects differ between trabecular and cortical bone.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Lithiophilic CoF 2 @C hollow spheres towards spatial lithium deposition for stable lithium metal batteries

Lithium metal (LM) is a promising anode for next-generation batteries due to its high theoretical capacity and low electrode potential. Nonetheless, side reactions, volume change, and unwanted lithium dendrite growth seriously limit the practical application of LM. Herein, with the aid of a hard template approach, a novel lithiophilic CoF 2 -carbon hollow sphere (CoF 2 @C-HS) composite material is successfully prepared via a facile in-situ fluorination and etching strategy. The lithiophilic CoF 2 acts as nucleation sites to reduce nucleation overpotential as well as induces the spatial Li deposition and the formation of LiF-rich solid electrolyte interphase (SEI), and the hollow carbon matrix can enhance the electrical conductivity and offer free space for LM deposition. Theoretical simulations reveal that the synergistic effect of lithiophilic CoF 2 and hollow carbon matrix homogenizes the electric field distribution and Li + flux. Benefiting from these advantages, the CoF 2 @C-HS-modified copper substrate electrode delivers an enhanced Coulombic efficiency (CE) of 93.7% for 280 cycles at 1 mA cm –2 and 1 mA h cm –2 . The symmetrical cell using CoF 2 @C-HS can stably cycle more than 1800 h with a low voltage hysteresis of 11 mV at a current density of 0.5 mA cm –2 and an areal capacity of 0.5 mA h cm –2 . Moreover, the Li@CoF 2 @C-HS composite anode enables more than 300 stable cycles at 1 C with a capacity retention of 95% in LiFePO 4 -based full cell and 110 stable cycles at 1 C in LiNi 0.8 Co 0.1 Mn 0.1 O 2 (NCM811)-based high-voltage full cell. Finally, this work might shed a new light on designing lithiophilic hosts to spatially confine LM deposition, realizing dendrite-free LM anodes and the practical applications of LM batteries.

25 ENERGY STORAGE↗