Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DUNE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Comparison of knobs on Mars to isolated hills in eolian, fluvial and glacial environments

The isolated knobs of Mars, characterized in terms of length, width, geographic location, proximity to streaks, and geologic surroundings through Viking Orbiters' photomosaics, are compared to isolated hills on earth eroded by eolian, fluvia, and glacial processes. Comparison of length-to-width ratios indicates similarity of the knobs to the hills formed in a hyperarid environment. The hills formed on earth by fluvial and glacial processes have length-to-width ratios significantly higher than those of the Martian knobs and have other diagnostic features not associated with the knobs. Moreover, streaks, splotches, dunes, and pitted and fluted rocks, all indicative of an eolian regime, are associated with the Martian knobs.

Manent, L. S.↗

Red/violet contrast reversal on Mars - Significance for eolian sediments

Viking Orbiter images of Mars are analyzed to define relationships between the observed contrast reversals (CR) and specific surface features. The link between CR phenomena and surface composition was first detected in contrast comparisons between UV and visible wavelength Mariner 9 data. Viking data, taken through red and violet filters, showed that the CRs occurred only with crater splotches and splotch-related streaks and in bright depositional and dark erosional streaks, both being low-albedo markings presumably caused by eolian forces. The splotch phenomena is confined mainly to the Oxia Palus region, although there are other regions where splotches and streaks commingle. Laboratory tests to mimic the CR characteristics showed that CRs are a common phenomena of different size fractions of iron oxides, e.g., goethite, where particles under 5 microns have been removed. The splotches, including dune formations, are therefore believed to indicate the presence of particles in the 100-800 microns diam range. Finer particles ride on the tops of the dust storms, and are continually removed from the surface by saltation.

Thomas, P.↗

Shuttle Imaging Radar - Physical controls on signal penetration and subsurface scattering in the Eastern Sahara

Interpretation of Shuttle Imaging Radar-A (SIR-A) images by McCauley et al. (1982) dramatically changed previous concepts of the role that fluvial processes have played over the past 10,000 to 30 million years in shaping this now extremely flat, featureless, and hyperarid landscape. In the present paper, the near-surface stratigraphy, the electrical properties of materials, and the types of radar interfaces found to be responsible for different classes of SIR-A tonal response are summarized. The dominant factors related to efficient microwave signal penetration into the sediment blanket include (1) favorable distribution of particle sizes, (2) extremely low moisture content and (3) reduced geometric scattering at the SIR-A frequency (1.3 GHz). The depth of signal penetration that results in a recorded backscatter, here called 'radar imaging depth', was documented in the field to be a maximum of 1.5 m, or 0.25 of the calculated 'skin depth', for the sediment blanket. Radar imaging depth is estimated to be between 2 and 3 m for active sand dune materials. Diverse permittivity interfaces and volume scatterers within the shallow subsurface are responsible for most of the observed backscatter not directly attributable to grazing outcrops. Calcium carbonate nodules and rhizoliths concentrated in sandy alluvium of Pleistocene age south of Safsaf oasis in south Egypt provide effective contrast in premittivity and thus act as volume scatterers that enhance SIR-A portrayal of younger inset stream channels.

Schaber, G. G.↗

Effects of space shuttle launches STS-1 through STS-9 on terrestrial vegetation of John F. Kennedy Space Center, Florida

Space Shuttle launches produce a cloud containing hydrochloric acid (HCl), aluminum oxide (Al203), and other substances. Acidities of less than 0.5 pH have been measured routinely in association with the launch cloud. In an area of about 22 ha regularly exposed to the exhaust cloud during most Shuttle launches, acute vegetation damage has resulted from the first nine Shuttle launches. Changes include loss of sensitive species, loss of plant community structure, reduction in total cover, and replacement of some species by weedy invaders. Community level changes define a retrogressive sequence. One-time impacts to strand and dune vegetation occurred after launches of STS-8 and STS-9. Acute vegetation damage occurred especially to sensitive species. Within six months, however, recovery was nearly complete. Sensitivity of species to the launch cloud was partially predicted by previous laboratory studies. Far-field acidic and dry fallout from the cloud as it rises to stabilization and moves with the prevailing winds causes vegetation spotting. Damage from this deposition is minor; typically at most 1% to 5% of leaf surface area is affected. No plant mortality or community changes have occurred from far-field deposition.

Schmalzer, P. A.↗

Radarclinometry

A general theory based on the implicit mathematical determinacy, and a corresponding algorithm, are developed to derive topographic maps from radar images as photometric arrays. Starting from a control profile, the theory produces topography by an area integration of radar brightness, and the control profile is formed under the assumption that the terrain properties are locally cylindrical. The calibration curve for pixel brightness versus incidence-angle is also produced. In the operational algorithm, topography is produced as a set of independent line integrations down each of the parallel range lines of the image using the theory for control-profile formation. An adaptive technique was employed to process SEASAT images of sand dunes, and the present method is demonstrated with a Motorola image of Crazy Jug Point in the Grand Canyon.

Wildey, Robert L.↗

Surface units on Mars: The assemblage in the Valles Marineris

The Valles Marineris system of troughs offers a unique opportunity to investigate Martian surface units in the third dimension. The troughs are more than 7 km deep in places and thus expose a significant portion of the Martian upper crust. The geological units within the Valles Marineris can be subdivided into three broad categories: wall rock, interior deposits, and surficial cover. Overall, the exposure units in the Valles Marineris give insights into surface units elsewhere on Mars. The observations tend to support the hypotheses that the highland material is charaged with ice, that some light-colored, rolling, smooth deposits are of volcanic origin, and that dark dunes and streaks are composed of wind blown mafic materials.

Lucchitta, B. K.↗

Spatial resolution and the geologic interpretation of Martian morphology - Implications for subsurface volatiles

Viking Orbiter images of the Acheron Fossae on Mars are presented and analyzed, with an emphasis on the impact of image resolution on the interpretation. High-resolution (less than 10 m/pixel) images reveal small mounds which can be interpreted as aeolian dunes, but these features are not evident on images with resolution of 50 m/pixel or greater. Also reported are the results of a visual inspection of 527 usable high-resolution images: it is found that all of the morphological features identified can arise in the absence of subsurface volatiles.

Zimbelman, James R.↗

Mars sampling strategy and aeolian processes

It is critical that the geological context of planetary samples (both in situ analyses and return samples) be well known and documented. Apollo experience showed that this goal is often difficult to achieve even for a planet on which surficial processes are relatively restricted. On Mars, the variety of present and past surface processes is much greater than on the Moon and establishing the geological context of samples will be much more difficult. In addition to impact hardening, Mars has been modified by running water, periglacial activity, wind, and other processes, all of which have the potential for profoundly affecting the geological integrity of potential samples. Aeolian, or wind, processes are ubiquitous on Mars. In the absence of liquid water on the surface, aeolian activity dominates the present surface as documented by frequent dust storms (both local and global), landforms such as dunes, and variable features, i.e., albedo patterns which change their size, shape, and position with time in response to the wind.

Greeley, Ronald↗

Effects of variation in look angle and wavelength in radar images for geologic applications: Implications for SIR-C and Magellan

Implications for SIR-C and Magellan of Seasat, SIR-A/B, and aircraft radar images which show that a variety of geologic targets can have similar backscatter and be indistinguishable under given observing wavelengths and/or look angles are discussed. The SIR-C/X-SAR combination provides three wavelengths, each of which may provide significant information not provided by another, and HH, VV, and one cross polarization each provide different and significant information. For study of unvegetated geological targets in relatively flat terrain, images made at smaller look angles probably provide more information than images from larger look angles. For Magellan, the possible existence of aeolian landforms such as sand dunes or sand sheets on Venus cannot be ruled out simply because they are not seen on radar images. The problem of dissimilar features having identical backscatter must also be considered in the Venusian context, where perhaps lava flows and impact ejecta could have similar high backscatter, or conversely, smooth aeolian materials and smooth volcanic ash (if either exist) could have a similar backscatter.

Blom, R. G.↗

Radiometric performance of AVIRIS: Assessment for an arid region geologic target

Data from several AVIRIS flight lines were examined to assess instrument stability and response. Both scene and in-flight calibration data were analyzed statistically. The data clearly indicates that, although the instrument output was noisy and unstable at the time of the data acquisition, valuable spectral signatures can still be extracted and analyzed. Some first order calibration corrections can be performed by forcing internal consistency within the data. AVIRIS data are delivered in band-interleaved-by-line format, but high efficiency routines were developed which access the data as either image or spectral planes and enable effective statistical and visual examination of both AVIRIS scenes and ancillary files. Two methods were used to extract spectral information from segment 4 of the Kelso Dunes flight. Both successfully identified at least three distinct spectral signatures, but neither has positively identified a specific material.

Kieffer, Hugh H.↗

Petrology and geochemistry of olivine-normative and quartz-normative basalts from regolith breccia 15498 - New diversity in Apollo 15 mare basalts

Analysis of mare basalt clasts from Apollo 15 shows a greater diversity than previously recognized and provides new constraints on the petrogenesis of these basalts. The quartz-normative basalts (QNB) from 15498 are divided into four groups based on chemical variations: primitive, intermediate/1, intermediate/2, and evolved. The olivine-normative basalts (ONB) are divided into three groups: low-SiO2, high-SiO2, and olivine-pyroxene cumulates. Least-squares mixing calculations show that the high SiO2 ONBs may be parental to the QNB suite. Variations within the low-SiO2 ONBs are explained by olivine factionation. It is suggested that the presence of these basalt types may result from the position of breccia 15498 near the edge of the mare plain where normal ONBs are scarce, and from its presumed origin as ejecta from Dune Crater.

Vetter, Scott K.↗

Construction and analysis of simulated Venera and Magellan images of Venus

The 1-3 km resolution Venera 15 and 16 images of Venus and the expected 120-300 m resolution Magellan mission image data are presently simulated through a digital processing of Seasat radar images covering a desert dune complex in the Gran Desierto of Sonora, accreted terranes in the central interior of Alaska, and the Appalachian Valley and Ridge Province. The simulations suggest that the nature and extent of terrain modification on Venus by such exogenic processes as atmosphere-surface weathering, erosion, and deposition, will remain uncertain, since the length scale of features indicative of such processes may be too small to be discerned from Venera data; Magellan data may provide this critical fine-scale morphological data, however, and thereby allow the testing of the two competing resurfacing scenarios.

Arvidson, R. E.↗

High-resolution topography and albedo of the South Polar layered deposits on Mars

Using a new photoclinometric technique with high-resolution Mariner 9 images, maximum slopes of 10 - 20 deg are found to occur on an exposure of layered deposits within the south polar residual cap of Mars. Stereophotogrammetry is used to constrain the photoclinometric solutions, which resolve layer thicknesses of 100-300 m. Albedo variations are correlated with slope, indicating that frost is present on level areas. There is evidence for temporal changes in frost distribution in the seven days between the to images used in this study. The magnitude of the slopes derived here and consideration of the stability of water ice at the surface of the layered deposits strongly suggest the presence of a competent weathering rind. The weathered surface may be composed of dark filamentary sublimation residue particles that protect the underlying ice from solar heating. This hypothesis is consistent with previous studies of the regional color and albedo of the layered deposits, which indicate that the deposits are slightly darker and less red than the bright dust that mantles much of the south polar region. Furthermore, the proposed weathering mechanism provides a plausible source of dark, saltating material for the Martian polar dune fields.

Herkenhoff, Ken E.↗

Regional aeolian dynamics and sand mixing in the Gran Desierto - Evidence from Landsat Thematic Mapper images

Mesoscale mapping of spatial variations in sand composition of the Gran Desierto (Sonora, Mexico) was carried out on multispectral Landsat TM images of this region, making it possible to examine the dynamic development of sand sheets and dunes. Compositions determined from remote imagery were found to agree well with samples from selected areas. The sand populations delineated were used to describe the sediment source areas, transport paths, and deposition sites. The image analysis revealed important compositional variations aver large areas that were not readily apparent in the field data.

Blount, Grady↗

Weathering and erosion of the polar layered deposits on Mars

The Martial polar layered deposits are widely believed to be composed of water ice and silicates, but the relative amount of each component is unknown. The conventional wisdom among Mars researchers is that the deposits were formed by periodic variations in the deposition of dust and ice caused by climate changes over the last 10 to 100 million years. It is assumed here that water ice is an important constituent of the layered deposits, that the deposits were formed by eolian processes, and that the origin and evolution of the north and south polar deposits were similar. Weathering of the layered deposits by sublimation of water ice can account for the geologic relationships in the polar regions. The nonvolatile components of the layered deposits appears to consist mainly of bright red dust, with small amounts of dark dust or sand. Dark dust, perhaps similar to the magnetic material found at the Viking Lander sites, may perferentially form filamentary residue particles upon weathering of the deposits. Once eroded, these particles may saltate to form the dark dunes found in both polar regions.

Herkenhoff, K. E.↗

Possible Aeolian megaripples on Mars

Viking orbiter image frames 442B01-10, at 8 m/pxl resolution show that valley floors are not smooth at all, but rather are covered with mounds of material interpreted as dunes. Striations oriented perpendicular to the valley axis can be seen in several locations. The striations are here interpreted to be aeolian megaripples formed from debris weathered from the yardangs. Terrestrial aeolian megaripples have wavelengths up to 25 m; it is not unreasonable that larger megaripples might form under favorable Martian conditions, given the wind speeds available and the lower Martian gravity. If the megaripple interpretation is correct, then by terrestrial analog the deposit in which they occur has a bimodal particle size distribution. One size will undergo saltation; the other, concentrated at the crests of the megaripples, is too large/and or too dense to be put into saltation. For Mars the former is sand-sized, the latter gravel-sized, provided the materials have typical densities.

Williams, S. H.↗

Wind abrasion on Mars

Aeolian activity was predicted for Mars from earth based observations of changing surface patterns that were interpreted as dust storms. Mariner 9 images showed conclusive evidence for aeolian processes in the form of active dust storms and various aeolian landforms including dunes and yardangs. Windspeeds to initiate particle movement are an order of magnitude higher on Mars than on Earth because of the low atmospheric density on Mars. In order to determine rates of abrasion by wind blown particles, knowledge of three factors is required: (1) particle parameters such as numbers and velocities of windblown grains as functions of windspeeds at various heights above the surface; (2) the susceptibility to abrasion of various rocks and minerals; and (3) wind frequencies and speeds. For estimates appropriate to Mars, data for the first two parameters can be determined through lab and wind tunnel tests; data for the last two factors are available directly from the Viking Lander meteorology experiments for the two landing sites.

Greeley, Ronald↗

The aeolian wind tunnel

The aeolian wind tunnel is a special case of a larger subset of the wind tunnel family which is designed to simulate the atmospheric surface layer winds to small scale (a member of this larger subset is usually called an atmospheric boundary layer wind tunnel or environmental wind tunnel). The atmospheric boundary layer wind tunnel is designed to simulate, as closely as possible, the mean velocity and turbulence that occur naturally in the atmospheric boundary layer (defined as the lowest portion of the atmosphere, of the order of 500 m, in which the winds are most greatly affected by surface roughness and topography). The aeolian wind tunnel is used for two purposes: to simulate the physics of the saltation process and to model at small scale the erosional and depositional processes associated with topographic surface features. For purposes of studying aeolian effects on the surface of Mars and Venus as well as on Earth, the aeolian wind tunnel continues to prove to be a useful tool for estimating wind speeds necessary to move small particles on the three planets as well as to determine the effects of topography on the evolution of aeolian features such as wind streaks and dune patterns.

Iversen, J. D.↗