Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DATA EVALUATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Nuclear Data Sheets for A = 28

Evaluated spectroscopic data and level schemes from radioactive decay and nuclear reaction studies are presented for {sup 28}F, {sup 28}Ne, {sup 28}Na, {sup 28}Mg, {sup 28}Al, {sup 28}Si, {sup 28}P, and {sup 28}S. This evaluation for A=28 supersedes the earlier evaluations by P.M. Endt (1998En04 and 1990En08). However, additional/detailed data for these nuclides can be found in earlier evaluations 1978En02 and 1973EnVA also by P.M. Endt.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Improved renormalization group computation of likelihood functions for cosmological data sets

Evaluation of likelihood functions for cosmological large scale structure data sets (including CMB, galaxy redshift surveys, etc.) naturally involves marginalization, i.e., integration, over an unknown underlying random signal field. Recently, I showed how a renormalization group method can be used to carry out this integration efficiently by first integrating out the smallest scale structure, i.e., localized structure on the scale of differences between nearby data cells, then combining adjacent cells in a coarse graining step, then repeating this process over and over until all scales have been integrated. Here I extend the formulation in several ways in order to reduce the prefactor on the method's linear scaling with data set size. The key improvement is showing how to integrate out the difference between specific adjacent cells before summing them in the coarse graining step, compared to the original formulation in which small-scale fluctuations were integrated more generally. I suggest some other improvements in details of the scheme, including showing how to perform the integration around a maximum likelihood estimate for the underlying random field. In the end, an accurate likelihood computation for a million-cell Gaussian test data set runs in two minutes on my laptop, with room for further optimization and straightforward parallelization.

79 ASTRONOMY AND ASTROPHYSICS↗

Remote sensing of physiographic soil units of Bennett County, South Dakota

A study was conducted in Bennett County, South Dakota, to establish a rangeland test site for evaluating the usefulness of ERTS data for mapping soil resources in rangeland areas. Photographic imagery obtained in October, 1970, was analyzed to determine which type of imagery is best for mapping drainage and land use patterns. Imagery of scales ranging from 1:1,000,000 to 1.20,000 was used to delineate soil-vegetative physiographic units. The photo characteristics used to define physiographic units were texture, drainage pattern, tone pattern, land use pattern and tone. These units will be used as test data for evaluating ERTS data. The physiographic units were categorized into a land classification system. The various categories which were delineated at the different scales of imagery were designed to be useful for different levels of land use planning. The land systems are adequate only for planning of large areas for general uses. The lowest category separated was the facet. The facets have a definite soil composition and represent different soil landscapes. These units are thought to be useful for providing natural resource information needed for local planning.

Frazee, C. J.↗

Nuclear Data Testing Of Pu{sup 239} CIELO Evaluation With NDaST

Within the Collaborative International Evaluated Library Organisation (CIELO) project a coordinated effort is being made amongst the different nuclear data evaluation projects, ENDF, JEFF, JENDL etc. to improve the cross sections of six of the most important isotopes, Pu{sup 239}, U{sup 235}, U{sup 238}, Fe{sup 56}, O{sup 16} and H{sup 1}. Recently developed, the Nuclear Data and Sensitivity Tool (NDaST) is an online tool (http://www.oecd-nea.org/ndast/) that allows nuclear data evaluators to get rapid feedback about the consequences of changes to nuclear data on integral experiment benchmarks that exist within the International Criticality Safety Benchmark Evaluation Project (ICSBEP) and International Reactor Physics Evaluation (IRPhE) Project handbooks. NDaST links the thousands of nuclear data sensitivity profiles in the Database for ICSBEP (DICE) and the IRPhE Database and Analysis Tool (IDAT), with the nuclear data viewing tool JANIS. NDaST can be used to provide timely feedback to CIELO participants. Normally an evaluator changes the ENDF/B files based on differential data, and subsequently hands the new evaluation to testers who give feedback on the performance of the new evaluation in terms of accurately predicting the integral benchmark results. This process is often slow. With accurate sensitivity coefficients it is feasible to predict the results of changes to differential data without performing the direct substitution, by simply multiplying the change in cross section with the sensitivity. Furthermore, when multiple aspects of the file are changed simultaneously, the impact of each individual change can be muddled in the substitution testing. NDaST when used in conjunction with direct perturbation testing can help provide feedback as to which cross section changes are driving changes in the benchmarks. In this paper we focus on Pu{sup 239}, and comparing the NDaST predictions of CIELO files to direct substitution. (authors)

07 ISOTOPE AND RADIATION SOURCES↗

Impact of Quikscat Data on Numerical Weather Prediction

One of the important applications of satellite surface wind observations is to increase the accuracy of weather analyses and forecasts. Satellite surface wind data can improve numerical weather prediction (NWP) model forecasts by contributing to improved analyses of the surface wind field and air sea fluxes. Through the data assimilation process,these data can also improve atmospheric mass and motion fields in the free atmosphere above the surface. The SeaWinds scatterometer on the QuikScat satellite was launched in July 1999 and represented a dramatic departure in design from the other scatterometer instruments launched during the past decade (ERS-1,2 and NSCAT). The NASA Data Assimilation Office (DAO) was the first data assimilation center to assimilate QuikScat Seawinds data and evaluate their impact on numerical weather prediction. Following the launch of QuikScat, a detailed evaluation of the initial surface wind data sets was performed as part of a collaborative project between the Environmental Modeling Center of NCEP, NESDIS and the DAO. More recently, the impact of Quikscat data was evaluated in detailed experiments using the NCEP operational data assimilation system. As a result of the beneficial impact obtained, NCEP began operational utilization of Quikscat data. Results from these experiments as well as recent DAO assimilation experiments showing the impact of Quikscat data on stratospheric analyses and forecasts will be presented at the meeting.

Atlas, Robert↗

Nuclear Data Sheets for A=217

The evaluated spectroscopic data are presented in this paper for 12 known nuclides with A=217 (Tl, Pb, Bi, Po, At, Rn, Fr, Ra, Ac, Th, Pa, U). For 217Tl, 217Pb, 217Pa, and 217U nuclei, only information on the ground state is available. Levels in 217 Bi are known only from isomer decay following fragmentation reaction and those in 217 At and 217 Rn only from the α decay of 221 Fr and 221 Ra, respectively. High spin levels in 217 Ra are mainly from 1987SuZY and 2011MuZZ which are a lab report and thesis, respectively. Due to differences between these studies, further experimental study is needed to firmly establish the level scheme. This evaluation was carried out as part of a joint IAEA-ICTP workshop for Nuclear Structure and Decay Data, organized and hosted by the IAEA, Vienna and ICTP, Trieste, Aug 22 to Sept 2 2016. The evaluation work was coordinated by E.A. McCutchan (BNL). Finally, this work supersedes the previous previous A=217 evaluation (2003Ak06) by Y.A. Akovali.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A = 70

Spectroscopic data for all nuclei with mass number A = 70 have been evaluated, and the corresponding level schemes from radioactive decay and reaction studies are presented. Since the previous evaluation, the half-life of {sup 70}Mn has been measured and excited states in {sup 70}Fe observed for the first time. Excited states in {sup 70}Ni have been more extensively studied while Coulomb excitation and collinear laser spectroscopy measurements in {sup 70}Cu have allowed for firm Jπ assignments. Despite new measurements, there remain some discrepancies in half-lives of low lying states in {sup 70}Zn. New measurements have extended the knowledge of high-spin band structures in {sup 70}Ge and {sup 70}As. This evaluation supersedes the prior A = 70 evaluation of 2004Tu09.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Evaluation of the Sensor Data Record from the Nadir Instruments of the Ozone Mapping Profiler Suite (OMPS)

This paper evaluates the first 15 months of the Ozone Mapping and Profiler Suite (OMPS) Sensor Data Record (SDR) acquired by the nadir sensors and processed by the National Oceanic and Atmospheric Administration Interface Data Processing Segment. The evaluation consists of an inter-comparison with a similar satellite instrument, an analysis using a radiative transfer model, and an assessment of product stability. This is in addition to the evaluation of sensor calibration and the Environment Data Record product that are also reported in this Special Issue. All these are parts of synergetic effort to provide comprehensive assessment at every level of the products to ensure its quality. It is found that the OMPS nadir SDR quality is satisfactory for the current Provisional maturity. Methods used in the evaluation are being further refined, developed, and expanded, in collaboration with international community through the Global Space-based Inter-Calibration System, to support the upcoming long-term monitoring.

validation↗

Data–Driven Velocity Model Evaluation Using K–Means Clustering

In this work, we develop a data-driven clustering method to evaluate a velocity model using surface wave velocity dispersion. This is done by first computing theoretical dispersion curves for 1-D velocity profiles of all the grid locations and then splitting the resulting dispersion curves into a certain number of groups via the K-means clustering. The observed dispersion curves are also clustered following the same procedure and the velocity model is assessed by comparing the spatial patterns obtained for the observed and synthetic data sets. The method is applied to evaluate two community velocity models in southern California, CVM-S4.26 and CVM-H15.1, using phase velocity maps derived for 3–16 s Rayleigh waves. We found a good correlation in the spatial distribution of clusters between the result of CVM-S4.26 and that of the observed data, suggesting that the CVM-S4.26 fits the observed dispersion maps better than the CVM-H15.1 in terms of features extracted from the clustering analysis.

58 GEOSCIENCES↗

Reliability of Photonuclear Data: Various Experiments and Evaluations

The well-known problem of reliability of partial photoneutron cross-section data obtained using beams of quasimonoenergetic annihilation photons was discussed. Noticeable disagreements between data from various experiments were analyzed using physical data reliability criteria. The experimentally-theoretical method for evaluating of reaction cross sections satisfied physical criteria was used and new reliable data were obtained for many nuclei. The disagreements between newly evaluated cross sections and data from the IAEA Digital Photonuclear Data Library were discussed.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Rumpling of LiF(001) surface from fast atom diffraction

Quantum diffraction of fast atoms scattered from the topmost layer of surfaces under grazing angles of incidence can be employed for the analysis of detailed structural properties of insulator surfaces. From comparison of measured and calculated diffraction patterns we deduce the rumpling of the topmost surface layer of LiF(001) (i.e., an inward shift of Li{sup +} ions with respect to F{sup -} ions). The effect of thermal vibrations on the measurement of rumpling is accounted for by ab initio calculations of the mean-square vibrational amplitudes of surface ions. At room temperature this leads to a reduction of the apparent rumpling by 0.008 A. We then obtain a rumpling of (0.05{+-}0.04) A, which improves its accuracy achieved in previous work.

36 MATERIALS SCIENCE↗

Nuclear Data Sheets for A=85

Evaluated experimental data are presented for 13 known nuclides of mass 85 (Zn, Ga, Ge, As, Se, Br, Kr, Rb, Sr, Y, Zr, Nb, Mo). Since the previous 1990 evaluation of A=85, {sup 85}Zn, {sup 85}Ga, {sup 85}Ge and {sup 85}nuclides are newly added here. Excited state data for {sup 85}Se, {sup 85}Zr have become available from radioactive decay and in–beam γ–ray studies. New and improved high–spin data are available for {sup 85}Br, {sup 85}Kr, {sup 85}Rb, {sup 85}Y, {sup 85}Nb and {sup 85}Mo. New direct and precise measurement of atomic masses of {sup 85}Ge, {sup 85}As, {sup 85}Se, {sup 85}Br, {sup 85}Rb, {sup 85}Zr, {sup 85}Nb and {sup 85}Mo have greatly improved the landscape of β decay–Q values and separation energies in this mass region. In spite of extensive experimental work on the isobaric nuclei of this mass chain several deficiencies remain. No excited states are known in {sup 85}Zn, {sup 85}Ga, {sup 85}As. Only a few excited state are assigned in {sup 85}Ge from {sup 85}Ga β– decay. From radioactivity studies, the decay schemes of {sup 85}Zn and {sup 85}Mo are not known, and those for {sup 85}Ga, {sup 85}Ge, {sup 85}As and 10.9–s isomer of {sup 85}Zr are incomplete. Level lifetimes are not known for excited states in {sup 85}Se, {sup 85}Br, {sup 85}Nb and {sup 85}Mo. The {sup 85}Tc nuclide has not been detected in fragmentation experiments at GANIL, alluding to its unbound nature for proton emission. The {sup 85}Kr, {sup 85}Rb, {sup 85}Sr, and {sup 85}Y nuclides remain the most extensively studied from many different reactions and decays. The evaluation of A=85 nuclides has been done after a span of 23 years, thus includes an extensive amount of new data for almost each nuclide. This work supersedes the data for A=85 nuclides presented in earlier full NDS publication by J. Tepel in 1980Te04 and a later one published in an update mode by H. Sievers in 1991Si01.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=64

The evaluated experimental data are presented and evaluated for 13 known nuclides of mass 64 (Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Ga, Ge, As, Se). For each nuclide, the best values combining all available data are recommended for spectroscopic properties. No excited states have been identified in 64 Ti, 64 As, and 64 Se. Only one excited state in 64 V as an isomer, and three in 64 Cr have been identified. Data for excited states in 64 Mn, 64 Fe, and 64 Co remain limited. 64 Ni, 64 Cu, and 64 Zn are the most studied nuclides through various reactions and decays, followed by 64 Ga and 64 Ge. In the opinion of the evaluators, there are several incomplete or discrepant aspects of the high-spin portion of the level scheme for 64 Zn above ≈5 MeV excitation which need to be resolved in further experiments using large γ-detector arrays. The decay schemes of 64 Ti β - , 64 As ε and 64 Se ε are unknown, while very little information is available for 64 V β - and 64 Cr β - . The decay schemes of 64 Mn β - , 64 Fe β - , 64 Co β - and 64Ge ε are somewhat better known, but still considered incomplete by evaluators. The decay scheme of 64 Ga ε decay is known in detail, however there is the possibility of additional levels populated above 4713 keV, as the Q(ε) value is 7171 keV. The β - , β + and ε decay modes of 64 Cu are well known, as this radionuclide is of great importance in applications, for example, as a dosimeter for neutron flux determination in nuclear reactors, and as a radiopharmaceutical for positron emission tomography (PET). This work supersedes earlier full evaluations of A=64 by 2007Si04, 1996Si12, 1991Si03, 1979Ha35 and 1974Au04.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Nuclear Data Sheets for A=190

The evaluated experimental data are presented and evaluated for 15 known nuclides of mass 190 (Hf, Ta, W, Re, Os, Ir, Pt, Au, Hg, Tl, Pb, Bi, Po). This work supersedes earlier full evaluations of A=190 by 2003Si05, 1990Si09, 1982Le22 and 1973Sc42. For 190Hf, only the isotopic identification has been made, with no information about the half-life of the ground state or its decay properties. For 190 Ta, only one excited state as an isomer has been identified, but with no knowledge about its decay properties. For 190 W, 190 Re, 190 Bi and 190 Po, available spectroscopic data are scarce. Here, the decay schemes of 190 Ta, 190 W, 190 Au, 190 Hg, 190 Au isomer decay, 190 Tl (both the activities), 190 Pb, and 190 Bi (both the activities) are considered incomplete by the evaluators. At present, extensive level structures, both the low-spin and high-spin, are known for 190 Os, 190 Ir, 190 Pt, 190 Au, 190 Hg, 190 Tl and 190 Pb, but data for level lifetimes, and γ-ray transition probabilities are generally lacking.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Forward modeling approach to nuclear reaction cross sections: Applications in neutron inelastic scattering

The development of nuclear reaction models for the production of evaluated nuclear data has traditionally been performed by comparing measured cross sections with predictions from reaction model codes whose physical input parameters are adjusted to obtain the best agreement between measured and modeled results. To more directly probe reaction model inputs, this work introduces a forward modeling approach to experimental reaction cross-section determination, where the most important physical input parameters to reaction model calculations are obtained via 𝜒 2 minimization between measured and calculated observables. This was demonstrated using data collected by the Gamma Energy Neutron Energy Spectrometer for Inelastic Scattering (GENESIS) at the 88-inch cyclotron at Lawrence Berkeley National Laboratory, a detection array consisting of organic liquid scintillators and high-purity germanium (HPGe) detectors. Using a broad-spectrum neutron beam and a 99.98%-enriched 56 Fe target, GENESIS was used to perform a simultaneous measurement of 56 Fe 𝛾-ray production cross sections and secondary neutron energy and angle distributions. The results of the forward modeling approach to the determination of energy-differential 𝛾-ray production cross sections for the yrast 4 + → 2 + and 6 + → 4 + transitions, as well as eight other off-yrast transitions, were compared against those obtained using conventional techniques, and the results are in good agreement. In addition to discrete 𝛾-ray yield total scattered neutron energy-angular distributions as a function of incident neutron energy were also obtained using forward modeling and found to agree with evaluated data, with the exception of elastic scattering at small angles. The fitted reaction model parameters obtained through forward modeling were also used to calculate the cross section for the unobserved (𝑛, 2⁢𝑛) reaction; excellent agreement with the current evaluation was obtained, providing a validation of the predictive capabilities of the forward model approach. This work bridges the gap between nuclear data experiment and evaluation by providing a new means for extracting inelastic neutron-scattering cross sections and neutron-induced 𝛾-ray production data while directly probing reaction model physics.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗