Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Connection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Energy Systems Integration: Demonstrating the Grid Benefits of Connected Devices

Overview fact sheet about the Electric Power Research Institute (EPRI) and the University of Delaware Integrated Network Testbed for Energy Grid Research and Technology Experimentation (INTEGRATE) project at the Energy Systems Integration Facility. INTEGRATE is part of the U.S. Department of Energy's Grid Modernization Initiative.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Vehicle Energy Management Optimization through Digital Maps and Connectivity

There is an opportunity for using digital maps with real-time updates to improve the energy management of vehicles. In this paper, we present research on how this can be achieved in the particular case of plug-in hybrid electric vehicles. With perfect knowledge of the trip ahead, it is possible to find the optimal control of the vehicle. Digital maps, however, provide only averaged information about the future itinerary, such as locations of stops, types of intersection, and average speeds. First, we demonstrate how we can generate naturalistic speed profiles for a given itinerary. We do so by augmenting the information from digital maps by actual recorded speeds from a travel survey and Markov chains. Second, we detail how these speed profiles can be used for control optimization. We use the Pontryagin minimum principle to optimally tune the vehicle energy management and then evaluate the actual fuel savings using the Autonomie simulation tool.

Connectivity↗

Modeling Transitions to Connected and Automated Vehicles

Determine how cost, technology, and stakeholder behavior can accelerate or impede CAV adoption and affect energy use, both during transition and at end states with varying CAV use, through development of a semi-quantitative 'CAV scenario generation' model, identifying data gaps needing future research.

30 DIRECT ENERGY CONVERSION↗

GeoBridge: Connecting Communities to Geothermal Information and Opportunities: Preprint

The geothermal community is well established with long-standing events, organizations, and tools that are known across the geothermal community. But many of these tools and resources are located behind pay walls, require memberships, or are otherwise difficult to find, especially for people looking to join the geothermal community. These barriers to access can prevent outsiders from discovering valuable geothermal resources, limiting the geothermal community's potential for collaboration with other communities, such as clean energy entrepreneurs looking to expand into geothermal energy. The Department of Energy's (DOE) GeoBridge serves to bring these communities together by acting as a single, publicly accessible, searchable portal that facilitates easy access to available geothermal knowledge and information. It works to expand and diversify the pool of geothermal stakeholders by providing in-roads to geothermal information and community resources. It helps build a stronger geothermal community; one inclusive of individuals and groups from a variety of different backgrounds, including potential investors and start-up companies looking to accelerate innovation in geothermal technologies. By linking communities to geothermal information, analysis and expertise, GeoBridge serves as a launch point, directing interested parties to existing data and tools, events, educational resources, STEM programs, permitting and regulatory information, and other resources that can be used to evaluate, promote, and discover geothermal opportunities.

access↗

GeoBridge: Connecting Communities to Geothermal Information and Opportunities

The geothermal community is well established with long-standing events, organizations, and tools that are known across the geothermal community. But many of these tools and resources are located behind pay walls, require memberships, or are otherwise difficult to find, especially for people looking to join the geothermal community. These barriers to access can prevent outsiders from discovering valuable geothermal resources, limiting the geothermal community's potential for collaboration with other communities, such as clean energy entrepreneurs looking to expand into geothermal energy. The Department of Energy's (DOE) GeoBridge serves to bring these communities together by acting as a single, publicly accessible, searchable portal that facilitates easy access to available geothermal knowledge and information. It works to expand and diversify the pool of geothermal stakeholders by providing in-roads to geothermal information and community resources. It helps build a stronger geothermal community; one inclusive of individuals and groups from a variety of different backgrounds, including potential investors and start-up companies looking to accelerate innovation in geothermal technologies. By linking communities to geothermal information, analysis and expertise, GeoBridge serves as a launch point, directing interested parties to existing data and tools, events, educational resources, STEM programs, permitting and regulatory information, and other resources that can be used to evaluate, promote, and discover geothermal opportunities.

access↗

The connection between natural gas hydrate and bottom-simulating reflectors

Bottom-simulating reflectors (BSRs) on marine seismic data are commonly used to identify the presence of natural gas hydrate in marine sediments, although the exact relationship between gas hydrate and BSRs is undefined. In this paper, to clarify this relationship we compile a data set of probable gas hydrate occurrence as appraised from well logs of 788 industry wells in the northern Gulf of Mexico. We combine the well log data set with a data set of BSR distribution in the same area identified from 3-D seismic data. We find that a BSR increases the chances of finding gas hydrate by 2.6 times as opposed to drilling outside a BSR and that the wells within a BSR also contain thicker and higher resistivity hydrate accumulations. Finally, even so, over half of the wells drilled through BSRs have no detectable gas hydrate accumulations and gas hydrate occurrences and BSRs do not coincide in most cases.

58 GEOSCIENCES↗

Unusual Lattice-Magnetism Connections in MnBi Nanorods

Lattice parameter, particle size, and thermal expansion results obtained from high-temperature synchrotron transmission X-ray diffraction are reported for magnetostructual NiAs-type MnBi nanorods embedded in a Bi matrix. The structural data are consistent with elevated-temperature magnetic measurements that indicate a first-order nanorod Curie transition at 520 K, significantly depressed from the bulk MnBi Curie temperature of 633 K. The data suggest that the unit cell volume dependence of the magnetic behavior - also known as the volume exchange striction - of the MnBi compound is the determining factor underlying this phenomenon. The results imply that materials with magnetostructural transitions of technological interest may be altered by strain effects to tailor the interatomic distances towards the critical transition values.

43 PARTICLE ACCELERATORS↗

Interfacial Connections between Organic Perovskite/n + Silicon/Catalyst that Allow Integration of Solar Cell and Catalyst for Hydrogen Evolution from Water

Abstract The rapidly increasing solar conversion efficiency (PCE) of hybrid organic–inorganic perovskite (HOIP) thin‐film semiconductors has triggered interest in their use for direct solar‐driven water splitting to produce hydrogen. However, application of these low‐cost, electronic‐structure‐tunable HOIP tandem photoabsorbers has been hindered by the instability of the photovoltaic‐catalyst‐electrolyte (PV+E) interfaces. Here, photolytic water splitting is demonstrated using an integrated configuration consisting of an HOIP/n + silicon single junction photoabsorber and a platinum (Pt) thin film catalyst. An extended electrochemical (EC) lifetime in alkaline media is achieved using titanium nitride on both sides of the Si support to eliminate formation of insulating silicon oxide, and as an effective diffusion barrier to allow high‐temperature annealing of the catalyst/TiO 2 ‐protected‐n + silicon interface necessary to retard electrolytic corrosion. Halide composition is examined in the (FA 1‐x Cs x )PbI 3 system with a bandgap suitable for tandem operation. A fill factor of 72.5% is achieved using a Spiro‐OMeTAD‐hole‐transport‐layer (HTL)‐based HOIP/n + Si solar cell, and a high photocurrent density of −15.9 mA cm −2 (at 0 V vs reversible hydrogen electrode) is attained for the HOIP/n + Si/Pt photocathode in 1 m NaOH under simulated 1‐sun illumination. While this thin‐film design creates stable interfaces, the intrinsic photo‐ and electro‐degradation of the HOIP photoabsorber remains the main obstacle for future HOIP/Si tandem PEC devices.

08 HYDROGEN↗

Metal–Organic Frameworks with Zero and Low‐Valent Metal Nodes Connected by Tetratopic Phosphine Ligands

Abstract Metal–organic frameworks (MOFs) constructed with M 0 nodes are attractive targets due to the reactivity of these low‐valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three‐dimensional MOFs with Pd 0 and Pt 0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine–metal bonds as the sole structural component. The MOFs display solid‐state luminescence, with emission maxima that are significantly red‐shifted compared to Pd(PPh 3 ) 4 . In addition, a Rh I low‐valent coordination solid based on the same linker design is reported, which displays solid‐state luminescence that is not observed for the molecular analogue.

Sikma, R. Eric↗

Metal–Organic Frameworks with Zero and Low–Valent Metal Nodes Connected by Tetratopic Phosphine Ligands

Metal–organic frameworks (MOFs) constructed with M 0 nodes are attractive targets due to the reactivity of these low-valent metals, but examples of these MOFs remain exceedingly rare. The rational design of three-dimensional MOFs with Pd 0 and Pt 0 nodes using tetratopic phosphine ligands is reported. Five new MOFs have been synthesized by systematic variation of the phosphine ligands and metal precursors employed, and these represent the first examples of MOFs constructed using phosphine–metal bonds as the sole structural component. Furthermore, the MOFs display solid-state luminescence, with emission maxima that are significantly red-shifted compared to Pd(PPh 3 ) 4 . In addition, a Rh I low-valent coordination solid based on the same linker design is reported, which displays solid-state luminescence that is not observed for the molecular analogue.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Connecting research and teaching introductory cell and molecular biology using an Arabidopsis mutant screen

A complex research project was translated into a Course-based Undergraduate Research Experience (CURE), which was implemented in sections of an introductory Cell and Molecular Biology laboratory course. The research laboratory generated an engineered plant line producing a growth-inhibiting, lipid-derived plant hormone and mutagenized this line. Students in the CURE cultured the mutagenized plant population and selected and characterized suppressor mutants. They learned to observe phenotypes related to the biosynthesis and perception of the plant hormone and explored the genetic and biochemical basis of these phenotypes. As the students studied the relevant genetic, molecular and biochemical concepts during this CURE, they were able to translate this knowledge into practice and develop scientific arguments. This CURE was a successful collaboration between the teaching lab and the research lab. It benefited both parties as the students had a real-life, deep learning experience in scientific methodology, while the research lab gathered data and materials for further studies

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Increasing Ligand Denticity and Stability for a Water Oxidation Electrocatalyst using P(V) as Connecting Element

Carboxylate complexes have risen to prominence in the field of water oxidation catalysis. Here for the first time we use the higher valence of phosphinates [P(V)] relative to that of carboxylates [C(IV)] to increase ligand denticity. We describe the synthesis and characterization of a new dianionic pentadentate ligand, bcpq 2− that contains a tridentate 2,2’-bipyridine-6-carboxylato moiety, in addition to a 6’-phosphinato substituent that acts as fourth ligand and bears a side arm containing a quinoline, the fifth ligand. The new bcpq ligand allows formation of [Ru(II)(bcpq)(L)] (2 a–b, L=picoline or isoquinoline) and in preliminary results, of a Co(II) complex. NMR spectroscopy, X-ray diffraction, cyclic voltammetry, differential pulse and square wave voltammetry were used to characterize 2 a–b, with 2 b being characterized more extensively as a catalyst. Bulk electrolysis over 15 h at pH 7 was also used, showing that 2 b gave 100±5 % faradaic efficiency and remained completely homogeneous, whereas 1 b was no longer homogeneous; this comparison conclusively shows the advantage of the added denticity in the electrocatalytic context. Replacing carboxylate with P(V) phosphinate with an added arm may be used in other ligand systems to enhance the durability of homogeneous catalysts.

14 SOLAR ENERGY↗

Connecting Collisionless Landau Fluid Closures to Collisional Plasma Physics Models

In this work, collisionless Landau fluid models are combined with collisional fluid models using a Padé approximation that is accurate in both collisionality limits. The collisionless models capture Landau damping through a nonlocal integro-differential sub-diffusion operator with ballistic characteristics. Collisional extensions of Landau fluid models are derived by analyzing the higher order moment equations which combine a Landau closure with collisional friction forces. The model derived here evolves fluid moments for density, parallel velocity, and anisotropic pressure and includes the frictional heat flux, the parallel thermal force and anisotropic electrical conductivity. Since anisotropies must vanish in the collisional limit, a simple closure can be derived if the friction force neglects pitch-angle scattering for the closure moments themselves. The resulting plasma physics model is potentially quite useful for applications in magnetic fusion and astrophysics.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

A connection to deep groundwater alters ecosystem carbon fluxes and budgets: Example from a Costa Rican rainforest

Field studies of watershed carbon fluxes and budgets are critical for understanding the carbon cycle, but the role of deep regional groundwater is poorly known and field examples are lacking. Here we show that discharge of regional groundwater into a lowland Costa Rican rainforest has a major influence on ecosystem carbon fluxes. Furthermore, this influence is observable through chemical, isotopic, and flux signals in groundwater, surface water, and air. Not addressing the influence of regional groundwater in the field measurement program and data analysis would give a misleading impression of the overall carbon source or sink status of the rainforest. In quantifying a carbon budget with the traditional "small watershed" mass-balance approach, it would be critical at this site and likely many others to consider watershed inputs or losses associated with exchange between the ecosystem and the deeper hydrogeological system on which it sits.

54 ENVIRONMENTAL SCIENCES↗