Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Catalogs”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

LSE-163: Data Products Definition Document

This document describes the data products and processing services to be delivered by the NSF-DOE Vera C. Rubin Observatory whilst performing the Legacy Survey of Space and Time (LSST). LSST will deliver three levels of data products and services. Prompt data products are computed and released within 24 hours of observation, and include images, difference images, catalogs of sources and objects detected in difference images, and catalogs of Solar System objects. Their primary purpose is to enable rapid follow-up of time-domain events. Data Release data products are computed during annual processing campaigns, and include well-calibrated single-epoch images, deep coadds, and catalogs of objects, sources, and forced sources, enabling static sky and precision time-domain science. The Science Platform will allow for the creation of User Generated data products and will enable science cases that greatly benefit from co-location of user processing and/or data within the Rubin Observatory Data Access Center. LSST will also devote 10% of observing time to programs with special cadence. Their data products will be created using the same software and hardware as Prompt and Data Release products. All data products will be made available using user-friendly databases and web services.

79 ASTRONOMY AND ASTROPHYSICS↗
NASA NTRS1972

A catalogue of devices applicable to the measurement of boundary layers and wakes on flight vehicles

A literature search was conducted to assemble a catalog of devices and techniques which have possible application to boundary layer and wake measurements on flight vehicles. The indices used in the search were NACA, NASA STAR, IAA, USGRDR and Applied Science and Technology Index. The period covered was 1950 through 1970. The devices contained in the catalog were restricted to those that provided essentially direct measurement of velocities, pressures and shear stresses. Pertinent material was included in the catalog if it contained either an adequate description of a device and associated performance data or a presentation of applicable information on a particular measurement theory and/or technique. When available, illustrations showing the configuration of the device and test condition data were also included.

Miley, S. J.↗
NASA NTRS1972

Corrections to star catalogues from satellite observations.

Theoretical investigation of the possibility of obtaining systematic corrections to star catalogs from observations of artificial satellites. A model is established to represent the system of equations formed when such corrections are determined simultaneously with corrections to the geocentric position of the observer. An analytical expression for the covariance matrix is set up for the two-dimensional (planar) case. The resulting correlations and weights are discussed. Since this method presents an independent way of obtaining the systematic errors in star catalogs, apart from the orientation to the equatorial system, it is related to the measurement of all quantities which depend on star positions. This institutes a completely new principle of obtaining systematic corrections to star catalogs. It is based not on rotation, but on comparing the angle subtended at the satellite by two stars to the angle subtended at the satellite by two points on the surface of the earth.

Williams, C. A.↗
NASA NTRS1974

A survey of possible missions to the periodic comets in the interval 1974 - 2010

Catalogs are developed to survey the mission possibilities for the short period comets. In the first the physical and pertinent orbital characteristics are given for 65 short period comets. The second catalog is one containing the predicted perihelia for each of the 65 comets between 1974 and 2010. Geometry is included to indicate feasibility of Earth-based observation and sighting within 100 days of perihelion. The comets are divided on the basis of size and activity into three groups from the data in the first catalog: primary, secondary and low interest. The perihelia are separated into two groups: satisfactory and not satisfactory on the basis of earth-comet distance.

Bender, D. F.↗
NASA NTRS1974

Determination of selenographic coordinates of lunar surface points from single pictures obtained from Zond 6

Pictures of the lunar surface with an image of practically the entire lunar limb were obtained from the Zond 6 spacecraft. During the time of exposure, the entire lunar surface covered by these photographs was illuminated by the sun. Such single pictures were used to find the external orientation elements and selenographic coordinates of the photographed lunar surface points. The selenographic coordinate system was specified by the Goloseyev catalog and was realized by points of this catalog identified on the pictures and termed reference points. Craters located on the invisible side of the moon and also other points of the Goloseyev catalog, which could be used as control points, were taken as the points being determined. The technique used to compute the selenographic coordinates of the points is outlined.

Ziman, Y. L.↗
NASA NTRS1979

Positions and identifications of galactic X-ray sources

A catalog of compact Galactic X-ray sources with precise positions is presented together with a large bibliography. The catalog provides available X-ray, optical, and radio data for the 96 compact Galactic sources that have been identified and contains the most precise of the available optical, X-ray, or radio positions, the maximum and minimum published intensities, references to finding charts, and a comprehensive referenced list of X-ray, optical, and radio characteristics. The catalog also includes X-ray sources in the Magellanic clouds as well as all unidentified hard (greater than 2 keV) compact sources with an error radius of less than 60 arcsec and a Galactic latitude of less than 10 deg (absolute value). The sources list includes 14 X-ray Doppler or eclipsing binaries, seven or eight other X-ray pulsators, 23 transients or X-ray novae, 15 persistent bright bulge sources, seven X-ray sources associated with globular clusters, nine bursters, seven Galactic Center sources, and 18 other identified sources.

Bradt, H. V.↗
NASA NTRS1981

NALNET book system: Cost benefit study

The goals of the NASA's library network system, NALNET, the functions of the current book system, the products and services of a book system required by NASA Center libraries, and the characteristics of a system that would best supply those products and services were assessed. Emphasis was placed on determining the most cost effective means of meeting NASA's requirements for an automated book system. Various operating modes were examined including the current STIMS file, the PUBFILE, developing software improvements for products as appropriate to the Center needs, and obtaining cataloging and products from the bibliographic utilities including at least OCLC, RLIN, BNA, and STIF. It is recommended that NALNET operate under the STIMS file mode and obtain cataloging and products from the bibliographic utilities. The recommendations are based on the premise that given the current state of the art in library automation it is not cost effective for NASA to maintain a full range of cataloging services on its own system. The bibliographic utilities can support higher quality systems with a greater range of services at a lower total cost.

Dewath, N. V.↗
NASA NTRS1981

Endurance tests with large-bore tapered-roller bearings to 2.2 million DN

Endurance life tests were run with standard design and optimized high-speed design 120.65-mm-(4.750-in.-) bore tapered-roller bearings at shaft speeds of 12,500 and 18,500 rpm, respectively. Standard design bearings of vacuum melted AISI 4320 and CBS-1000M, and high-speed design bearings of CBS-1000M and through-hardened AISI M-50 were run under heavy combined radial and thrust load until fatigue failure or until a preset cutoff time of 1100 hours was reached. Standard design bearings made from CBS 1000M material ran to a 10 percent life approximately six times rated catalog life. Twelve identical bearings of AISI 4320 material ran to ten times rated catalog life without failure. Cracking and fracture of the cones of AISI M-50 high-speed design bearings occurred at 18,500 rpm due to high tensile hoop stresses. Four CBS 1000M high-speed design bearings ran to twenty-four times rated catalog life without any spalling, cracking or fracture failures.

Parker, R. J.↗
NASA NTRS1982

Documentation for the machine-readable version of the first Santiago-Pulkovo Fundamental Stars Catalogue (SPF1 catalogue)

The machine-readable version of the first Santiago-Pulkovo Fundamental Stars catalog is described. It is intended to enable users to read and process the computerized catalog without the problems and guesswork often associated with such a task. The source reference should be consulted for additional details regarding the measurements, instrument characteristics, reductions, construction of the quasi-absolute system of right ascension, and star positions in the catalog.

Warren, W. H., Jr.↗
NASA NTRS1981

Endurance tests with large-bore tapered-roller bearings to 2.2 million DN

Endurance life tests were run with standard-design bearings of vacuum-melted AISI 4320 and CBS-1000M at 12,500 rpm, and high-speed bearings of CBS-1000M and trough-hardened AISI M-50 at 18,500 rpm. Both sets of bearings were of 120.65 mm bore-tapered roller type, and were run under heavy combined radial and thrust loads until either fatigue failure or a preset cutoff time of 1100 hours was reached. It was found that: (1) the CBS-1000M standard-design bearings ran to a 10% life approximately six times that of the rated catalog life; (2) twelve identical bearings of AISI 4320 ran to ten times rated catalog life without failure; (3) cracking and fracture of the cones of AISI M-50 high-speed design bearings occurred at 18,500 rpm due to high tensile hoop stresses; and (4) four CBS 1000M high-speed bearings ran to twenty-four times rated catalog life without spalling, cracking or fracture failures.

Parker, R. J.↗
NASA NTRS1982

The astronomical data base and retrieval system at NASA

More than 250 machine-readable catalogs of stars and extended celestial objects are now available at the NASA/Goddard Space Flight Center (GSFC) as the result of over a decade of catalog acquisition, verification and documentation. Retrieval programs are described which permit the user to obtain from a remote terminal bibliographical listings for stars; to find all celestial objects from a given list that are within a defined angular separation from each object in another list; to plot celestial objects on overlays for sky survey plate areas; and to search selected catalogs for objects by criteria of position, identification number, magnitude or spectral type.

Mead, J. M.↗
NASA NTRS1983

Very large spiral galaxies

As a first step in the systematic study of large spirals, which may be useful in cosmological tests and studies of galaxy evolution, a catalog of the 107 largest known spiral galaxies is presented. Catalog galaxies have isophotal diameters greater than 90 kpc, assuming an H(zero) value of 50 km/sec per Mpc. UBVR photoelectric photometry is presented for 20 of these galaxies, and absolute magnitudes are derived for all galaxies in the catalog by transforming Zwicky magnitudes to the B(T) system.

Romanishin, W.↗
NASA NTRS1983

Documentation for the machine-readable version of the Fourth Cambridge Radio Survey Catalogue (4C) (Pilkington, Gower, Scott and Wills 1965, 1967)

The machine readable catalogue contains survey data from the papers of Pilkington and Scott and Gower, Scott and Wills. These data result from a survey of radio sources between declinations -07 deg and +80 deg using the large Cambridge interferometer at 178 MHz. The computerized catalog contains for each source the 4C number, 1950 position, measured flux density, and accuracy class. For some sources miscellaneous brief comments such as cross identifications to the 3C catalog or remarks on contamination from nearby sources are given at the ends of the data records. A detailed description of the machine readable catalog as it is currently being distributed by the Astronomical Data Center is given to enable users to read and process the data.

Warren, W. H., Jr.↗
NASA NTRS1983

Documentation for the machine-readable version of the SAO-HD-GC-DM cross index version 1983

An updated and extended machine readable version of the Smithsonian Astrophysical Observatory star catalog (SAO) is described. A correction of all errors which were found since preparation of the original catalog which resulted from misidentifications and omissions of components in multiple star systems and missing Durchmusterung numbers (the common identifier) in the SAO Catalog are included and component identifications from the Index of Visual Double Stars (IDS) are appended to all multiple SAO entries with the same DM numbers, and lower case letter identifiers for supplemental BD stars are added. A total of 11,398 individual corrections and data additions is incorporated into the present version of the cross index.

Roman, N. G.↗
NASA NTRS1984

Solar-terrestrial data access distribution and archiving

It is recommended that a central data catalog and data access network (CDC/DAN) for solar-terrestrial research be established, initially as a NASA pilot program. The system is envisioned to be flexible and to evolve as funds permit, starting from a catalog to an access network for high-resolution data. The report describes the various functional requirements for the CDC/DAN, but does not specify the hardware and software architectures as these are constantly evolving. The importance of a steering committee, working with the CDC/DAN organization, to provide scientific guidelines for the data catalog and for data storage, access, and distribution is also stressed.

Source record↗
NASA NTRS1986

Equipment for Microgravity Research

Illustrated catalog describes equipment and facilities available for experiments under low-gravity conditions. Catalog encourages scientific and commercial organizations to investigate benefits of conducting research and manufacturing activities in microgravity environment. Catalog covers equipment ranging from containers to spacecraft.

Fountain, J. A.↗
NASA NTRS1984

Documentation for the machine-readable version of the ANS Ultraviolet Photometry Catalogue of Point Sources (Wesselius et al 1982)

The machine-readable version of the Astronomical Netherlands Satellite ultraviolet photometry catalog is described in detail, with a byte-by-byte format description and characteristics of the data file given. The catalog is a compilation of ultraviolet photometry in five bands, within the wavelength range 155 nm to 330 nm, for 3573 mostly stellar objects. Additional cross reference data (object identification, UBV photometry and MK spectral types) are included in the catalog.

Warren, W. H., Jr.↗