Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CONE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Computation of supersonic turbulent flow past a spinning cone

Computational results are presented for supersonic laminar and turbulent flow past a pointed cone at angle of attack obtained with a parabolic Navier-Stokes marching code. The code takes into account the asymmetries in the flowfield resulting from spinning motion and computes the asymmetric shock shape, crossflow and streamwise shear, heat transfer, crossflow separation, and vortex structure. The Magnus force and moments are also computed. Comparisons are made with other analyses based on boundary-layer equations. For certain laminar flow conditions, an anomaly is discovered in the displacement thickness contribution to the Magnus force when compared with boundary-layer results. For turbulent flow, at small angles of attack, good agreement is obtained with the experimental data and other theoretical results.

Agarwal, R. K.↗
NASA NTRS1984

Planetary Mach cones - Theory and observation

The asymptotic behavior of planetary bow shocks and the ability of gas dynamic theory to describe it are studied. Spacecraft observations at Venus, earth, and Mars are used to model the shapes and positions of their distant bow waves. The measured planetary Mach cone angles are compared with the mean sonic and MHD fast wave Mach numbers at 0.7, 1.0, and 1.5 AU to assess the downstream influence of the interplanetary magnetic field. Numerical gas dynamic flow solutions extending to 50 obstacle radii behind each planet are obtained and tested against the observed location of the downstream bow shock.

Slavin, J. A.↗
NASA NTRS1984

Calculation of a hollow-cone liquid spray in a uniform air stream

Fluid dynamic computer codes for the simulation of flows in gas turbine engine combustion systems are being developed. NASA is currently sponsoring a two-phase program for the evaluation of the performance of current codes, taking into account also an improvement of accuracy, if needed. The present investigation forms a part of this program. The numerical technique used includes a Lagrangian spray model for liquid fuels. The spray model, in conjunction with the turbulence model, determines the distribution of fuel in the burning zone of the combustor. The numerical technique was applied to a hollow-cone pressure atomizer spraying water into a coflowing confined airstream.

Sturgess, G. J.↗
NASA NTRS1984

Comparative study of the loss cone-driven instabilities in the low solar corona

A comparative study of the loss cone-driven instabilities in the low solar corona is undertaken. The instabilities considered are the electron cyclotron maser, the whistler, and the electrostatic upper hybrid. It is shown that the first-harmonic extraordinary mode of the electron cyclotron maser instability is the fastest growing mode for strong magnetized plasma (the ratio of plasma frequency to cyclotron frequency being less than 0.35). For values of the ratio between 0.35 and 1.0, the first-harmonic ordinary mode of the electron cyclotron maser instability dominates the emission. For ratio values greater than 1.0, no direct electromagnetic radiation is expected since other instabilities, which do not escape directly, saturate the electron cyclotron maser (the whistler or the electrostatic upper hybrid waves). It is also shown that the second-harmonic electron cyclotron maser emission never grows to an appreciable level. Thus, it is suggested that the electron cyclotron maser instability can be the explanation for the escape of the first harmonic from a flaring loop.

Sharma, R. R.↗
NASA NTRS1984

Broadening of the Interplanetary Helium Cone Structure Due to Elastic Collisions of LISM Helium Atoms with Solar Wind Ions

Neutral interstellar particles penetrating into the heliosphere, besides being subject there to specific loss processes, suffer elastic collisions with KeV-solar wind ions. The momentum transfer to the neutrals connected with these collisions leads to a loss of angular momentum with respect to the Sun and to a fractional compensation of the effective solar gravity. The dynamical particle trajectories hence are changed into non-Keplerians leading to density and temperature distributions differing from those calculated in the past. This is found from a solution of the Boltzmann equation that linearizes the effect of this additional force. It is shown that the HeI-584A resonance glow of the heliospheric helium cone lead to substantially lower interstellar helium temperatures if re-interpreted on the basis of this revised theory. These temperatures now seem to be in accordance with the derived temperatures for interstellar hydrogen.

Fahr, H. J.↗
NASA NTRS1984

Electron-cyclotron maser radiation from a relativistic loss-cone distribution

A relativistic analysis of the electron-cyclotron maser instability in a loss-cone distribution is presented, extending the treatment of Lau and Chu (1983) to include the effects of finite k-perpendicular (as encountered in laboratory tandem-mirror devices with mean energies in excess of 50 keV). The results are presented in graphs, and it is found that the k-perpendicular effects are significant, so that emission perpendicular to the magnetic field is associated with most rapid growth of the instability. The persistence of the instability when the ratio of the plasma frequency to the electron-cyclotron frequency is less than 0.1 is demonstrated, and the factors which need to be accounted for in applying the results to actual mirror devices are indicated.

Pritchett, P. L.↗
NASA NTRS1985

Computational methods for hypersonic viscous flow over finite ellipsoid-cones at incidence

A numerical method, which is simpler than others currently in use, is proposed for determining the full viscous flow over a finite body in hypersonic stream at high altitude. It treats the shock layer surrounding the blunt foebody and the near wake behind the base simultaneously by formulating the Navier-Stokes equations in conformal and azimuthal-angle coordinates. The computational domain is confined to the body wall, outflow surface and the bow shock, which is adjusted along the coordinate normal to the wall in the course of iterations. Because of the optimal grid and a well developed alternating direction implicit factorization technique for the governing equations, reasonably accurate results can be obtained on a 30 by 36 by 6 grid with 400 time-marching iterations. Results for body shapes belonging to the ellipsoid-cone family are compared with the experimental data for the Apollo command module and the Viking aeroshell. Validation of the method based on self-consistency is also discussed.

Li, C. P.↗
NASA NTRS1984

Correlation of transonic-cone preston-tube data and skin friction

Preston-tube measurements obtained on the Arnold Engineering Development Center (AEDC) Transition Cone have been correlated with theoretical skin friction coefficients in transitional and turbulent flow. This has been done for the NASA Ames 11-Ft Transonic Wind Tunnel (11 TWT) and flight tests. The developed semi-empirical correlations of Preston-tube data have been used to derive a calibration procedure for the 11 TWT flow quality. This procedure has been applied to the corrected laminar data, and an effective freestream unit Reynolds number is defined by requiring a matching of the average Preston-tube pressure in flight and in the tunnel. This study finds that the operating Reynolds number is below the effective value required for a match in laminar Preston-tube data. The distribution of this effective Reynolds number with Mach number correlates well with the freestream noise level in this tunnel. Analyses of transitional and turbulent data, however, did not result in effective Reynolds numbers that can be correlated with background noise. This is a result of the fact that vorticity fluctuations present in transitional and turbulent boundary layers dominate Preston-tube pressure fluctuations and, therefore, mask the tunnel noise eff ects. So, in order to calibrate the effects of noise on transonic wind tunnel tests only laminar data should be used, preferably at flow conditions similar to those in flight tests. To calibrate the effects of transonic wind-tunnel noise on drag measurements, however, the Preston-tube data must be supplemented with direct measurements of skin friction.

Abu-Mostafa, A. S.↗
NASA NTRS1986

High-speed aerodynamics of several blunt-cone configurations

The experimental techniques and results from NASA Ames research into the aerodynamics of blunt shapes are described. Two facilities are used: the Hypersonic Free Flight Aerodynamic Facility (HFFAF) and the Pressurized Ballistic Range (PBR). The HFFAF features a 23 m test section through which projectiles can be fired by light-gas guns to achieve velocities up to 9 km/sec in pressures from 1 atm down to 20 microns Mg. Aerodynamic flight data are recorded with shadowgraphs. The 62 m long PBR, with 24 orthogonal spark shadowgraph stations, allows testing in up to 6 atm pressures but with only half the velocity of the HFFAF. Tests have been performed on the Galileo probe to be dropped into the Jovian atmosphere. The Galileo data for a 45 deg cone probe have been similar to Pioneer Venus probe data. Ballistic data are presently being obtained for the probe at Re below 1000, when the drag coefficients are expected to increase dramatically as the probe enters the Jovian atmosphere and begins braking from 4700 m/s speed. Sample test data from an OTV which can change orbits through aerodynamic maneuvers and for several asymmetric configurations ae also provided.

Intrieri, P. F.↗
NASA NTRS1986

A comparison of computed and experimental surface pressure and heating on 70 deg sphere cones at angles of attack to 20 deg

A method for handling the flow fields around 70 deg spherical cones at angles of attack up to 20 deg is described. Surface pressure and heating results are compared with existing wind tunnel data. Computed surface pressures are found to be in excellent agreement with experimental data, while the surface heating from approximate and finite difference forms of the boundary layer equations are in good agreement with the data. The effect of bluntness ratio on surface pressures and heating is very small. Body corner radius, while not having a significant impact on body aerodynamics, produced large changes in surface pressure and heating distribution.

Weilmuenster, K. J.↗
NASA NTRS1985

Discovery of an accretion shock cone in 22 Vulpeculae

A previous report that 22 Vul is a zeta Aurigae-type eclipsing binary is supported by the discovery of evidence for an accretion shock cone in 22 Vul similar to those found in zeta Aurigae and 32 Cygni. Such systems consist of a cool supergiant star primary and a hot dwarf secondary (G3 Ib-II and B9 in the case of 22 Vul) and undergo atmospheric eclipses.

Ahmad, I. A.↗
NASA NTRS1986

Saturation of cyclotron maser instability driven by an electron loss-cone distribution

The resonance diffusion of electrons in velocity space caused by the excited EM wave fields is considered to be the dominant saturation process of cyclotron maser instability that is driven by an electron loss-cone distribution. An upper bound of the saturation level is derived analytically. Since the resulting saturation level is low, the resonance diffusion is indeed responsible for the saturation of the cyclotron maser instability.

Kuo, S. P.↗
NASA NTRS1986

Bistatic scattering from a cone frustum

The bistatic scattering from a perfectly conducting cone frustum is investigated using the Geometrical Theory of Diffraction (GTD). The first-order GTD edge-diffraction solution has been extended by correcting for its failure in the specular region off the curved surface and in the rim-caustic regions of the endcaps. The corrections are accomplished by the use of transition functions which are developed and introduced into the diffraction coefficients. Theoretical results are verified in the principal plane by comparison with the moment method solution and experimental measurements. The resulting solution for the scattered fields is accurate, easy to apply, and fast to compute.

Ebihara, W.↗
NASA NTRS1986

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 1

A preliminary design and analysis was completed for a SLEEC (Shingle Lap Extendible Exit Cone) which could be incorporated on the Space Transportation System (STS) Solid Rocket Booster (SRB). Studies were completed which predicted weights and performance increases and development plans were prepared for the full-scale bench and static test of SLEEC. In conjunction with the design studies, a series of supporting analyses were performed to assure the validity and feasibility of performance, fabrication, cost, and reliability for the selected design. The feasibility and required amounts of bench, static firing, and flight tests considered necessary for the successful incorporation of SLEEC on the Shuttle SRBs were determined. Preliminary plans were completed which define both a follow on study effort and a development program.

Baker, William H., Jr.↗
NASA NTRS1986

SRB/SLEEC (Solid Rocket Booster/Shingle Lap Extendible Exit Cone) feasibility study, volume 2. Appendix A: Design study for a SLEEC actuation system

The results are presented of a design feasibility study of a self-contained (powered) actuation system for a Shingle Lap Extendible Exit Cone (SLEEC) for Transportation System (STS). The evolution of the SLEEC actuation system design is reviewed, the final design concept is summarized, and the results of the detailed study of the final concept of the actuation system are treated. A conservative design using proven mechanical components was established as a major program priority. The final mechanical design has a very low development risk since the components, which consist of ballscrews, gearing, flexible shaft drives, and aircraft cables, have extensive aerospace applications and a history of proven reliability. The mathematical model studies have shown that little or no power is required to deploy the SLEEC actuation system because acceleration forces and internal pressure from the rocket plume provide the required energies. A speed control brake is incorporated in the design in order to control the rate of deployment.

Thompson, D. S.↗
NASA NTRS1988

Computational validation of a parabolized Navier-Stokes solver on a sharp-nose cone at hypersonic speeds

Perfect gas computational results from a newly-developed upwind, parabolized Navier-Stokes (PNS) solver are compared with an existing set of experimental laminar results for a 10-deg half-angle circular cone at freestream Mach number of 7.95. Comparisons were performed with surface pressure and heat transfer data, as well as with flowfield pitot measurements. The PNS code predicted the surface quantities accurately up through 20-deg angle-of-attack, including crossflow separation, and correctly defined the location of the bow shock and the edge of the boundary layer. The importance of cell Reynolds number, grid density, and thermal boundary conditions to the accurate prediction of the flowfield are examined through numerical emamples.

Huebner, Lawrence D.↗
NASA NTRS1989

Study of hypersonic flow past sharp cones

Calculations using the direct simulation Monte Carlo (DSMC) method of Bird for flow past sharp cones in the near continuum to free molecule flow regime are presented and compared with experiment. It is found that results are sensitive to the grid and the interaction potential. Moreover, the time counter method was found to be as accurate as other methods when the solution is grid independent. Finally, the results show that the effects of the wake on the forebody surface properties are minimal.

Taylor, Jeff C.↗