Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAVITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Frequency characteristics of a gas coupled-cavity ring laser

Based on a theoretical model describing the lasing dynamics in a gas ring laser (GRL) with coupled cavities, we have investigated the frequency characteristics of radiation. The conditions are found under which an increase in the scale factor is the largest. The regime of frequency locking of counterpropagating waves is studied. It is shown that the lock-in region in a GRL with an antiphase optical coupling of the cavities remains the same as without an additional cavity. The conditions are determined under which multistability of the radiation characteristics arises in a coupled-cavity GRL. In the numerical solution of the equations of the considered theoretical model, three branches of the frequency response are found. (paper)

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Visualization of the Mode Shapes of Pressure Oscillation in a Cylindrical Cavity

Our work describes a novel experimental method to visualize the mode shapes of pressure oscillation in a cylindrical cavity. Acoustic resonance in a cavity is a grand old problem that has been under investigation (using both analytical and numerical methods) for more than a century. In this article, a novel method based on high speed imaging of combustion chemiluminescence was presented to visualize the mode shapes of pressure oscillation in a cylindrical cavity. By generating high-temperature combustion gases and strong pressure waves simultaneously in a cylindrical cavity, the pressure oscillation can be inferred due to the chemiluminescence emissions of the combustion products. We can then visualized the mode shapes by reconstructing the images based on the amplitudes of the luminosity spectrum at the corresponding resonant frequencies. Up to 11 resonant mode shapes were clearly visualized, each matching very well with the analytical solutions.

59 BASIC BIOLOGICAL SCIENCES↗

SHOCKS AND CAVITIES FROM MULTIPLE OUTBURSTS IN THE GALAXY GROUP NGC 5813: A WINDOW TO ACTIVE GALACTIC NUCLEUS FEEDBACK

We present results from new Chandra, GMRT, and SOAR observations of NGC 5813, the dominant central galaxy in a nearby galaxy group. The system shows three pairs of collinear cavities at 1 kpc, 8 kpc, and 20 kpc from the central source, from three distinct outbursts of the central active galactic nucleus (AGN), which occurred 3 x 10{sup 6}, 2 x 10{sup 7}, and 9 x 10{sup 7} yr ago. The H{alpha} and X-ray observations reveal filaments of cool gas that has been uplifted by the X-ray cavities. The inner two cavity pairs are filled with radio-emitting plasma, and each pair is associated with an elliptical surface brightness edge, which we unambiguously identify as shocks (with measured temperature jumps) with Mach numbers of M {approx} 1.7 and M {approx} 1.5 for the inner and outer shocks, respectively. Such clear signatures from three distinct AGN outbursts in an otherwise dynamically relaxed system provide a unique opportunity to study AGN feedback and outburst history. The mean power of the two most recent outbursts differs by a factor of six, from (1.5-10)x10{sup 42} erg s{sup -1}, indicating that the mean jet power changes significantly over long ({approx}10{sup 7} yr) timescales. The total energy output of the most recent outburst is also more than an order of magnitude less than the total energy of the previous outburst (1.5 x 10{sup 56} erg versus 4 x 10{sup 57} erg), which may be a result of the lower mean power, or may indicate that the most recent outburst is ongoing. The outburst interval implied by both the shock and cavity ages ({approx}10{sup 7} yr) indicates that, in this system, shock heating alone is sufficient to balance radiative cooling close to the central AGN, which is the relevant region for regulating feedback between the intracluster medium and the central supermassive black hole.

79 ASTRONOMY AND ASTROPHYSICS↗

Flux pinning characteristics in cylindrical ingot niobium used in superconducting radio frequency cavity fabrication

We present the results of from DC magnetization and penetration depth measurements of cylindrical bulk large-grain (LG) and fine-grain (FG) niobium samples used for the fabrication of superconducting radio frequency (SRF) cavities. The surface treatment consisted of electropolishing and low temperature baking as they are typically applied to SRF cavities. The magnetization data were fitted using a modified critical state model. The critical current density Jc and pinning force Fp are calculated from the magnetization data and their temperature dependence and field dependence are presented. The LG samples have lower critical current density and pinning force density compared to FG samples which implies a lower flux trapping efficiency. This effect may explain the lower values of residual resistance often observed in LG cavities than FG cavities.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Evaluation of predictive correlation between flux expulsion and grain growth for superconducting radio frequency cavities

Abstract A series of experiments were carried out in an effort to develop a simple method for predicting the magnetic flux expulsion behavior of high purity niobium used to fabricate superconducting radio frequency (SRF) cavities. Using conventional metallographic characterizations in conjunction with high spatial resolution electron backscattered diffraction-orientation imaging microscopy, we find that the flux expulsion behavior of 1.3 GHz single cell SRF Nb cavities is significantly associated with the grain growth of the Nb material during heat treatment. Most of the Nb grains rapidly grew during 900 °C heat treatment, and were likely full-recrystallized with 1000 °C HT. When compared to the magnetic flux expulsion ratio ( B sc / B nc ) at Δ T = 5 K, the flux expulsion efficiency of the cavities increases with the increase of grain size. Most interestingly, 900 °C HT shows a roughly linear trend that suggests that this criterion could be used to predict the appropriate heat treatment temperature for sufficient flux expulsion behavior in SRF-grade Nb. This result can be used to see if flux expulsion can be predicted by examining the materials coming from Nb vendors, prior to cavity fabrication.

43 PARTICLE ACCELERATORS↗

Revealing the loss mechanisms of a 3D superconducting microwave cavity for use in a dark matter search

Superconducting microwave cavities have found applications in many areas including quantum computing, particle accelerators, and dark matter searches. Their extremely high quality factors translate to very narrow bandwidth, which makes them key components of sensitive detectors. In this study, we aim to understand the loss mechanisms of an aluminium cavity, with a fundamental mode frequency of about 2.5123 GHz, and how they change as the cavity material transitions from the superconducting to normal state. We found that at temperatures not much lower than the transition temperature $T_c$, losses are dominated by quasiparticle excitations and are well described by the Bardeen–Cooper–Schrieffer theory. The exponential decrease of the quasiparticle density below $T_c$ results in a 1000-fold increase of the quality factor, as well as a shift of the resonance frequency due to the change of the kinetic inductance of the superconductor. At very low temperatures, losses due to two-level systems begin to dominate giving a peak in the quality factor of about 2.76 x 10 7 at 130 mK. Understanding the loss mechanisms is invaluable, as the working temperature of the cavity may vary during operation regardless of its application.

Physics - Physics of elementary particles and fiel↗

Design, fabrication, RF test at 2 K of 1050MHz, β=0.49 single cell large and fine grain niobium cavity

BARC is developing a technology for the accelerator driven subcritical system (ADSS) that will be mainly utilized for the transmutation of nuclear waste and enrichment of U233. Design and prototyping of a superconducting medium velocity cavity has been taken up as a part of the ADSS project. The cavity design for {beta} = 0.49, f = 1050 MHz has been optimized to minimize the peak electric and magnetic fields, with a goal of 5 MV/m of accelerating gradient at a Q > 5 x 10{sup 9} at 2 K. After the design optimization, two single cell cavities were fabricated from polycrystalline (RRR > 200) and large grain (RRR > 96) Niobium material. The cavities have been tested at 2 K in a vertical cryostat at Jefferson Lab and both achieved the performance specifications.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

SDO/AIA DETECTION OF SOLAR PROMINENCE FORMATION WITHIN A CORONAL CAVITY

We report the first analyses of SDO/AIA observations of the formation of a quiescent polar crown prominence in a coronal cavity. The He II 304 A (log T{sub max} {approx} 4.8 K) data show both the gradual disappearance of the prominence due to vertical drainage and lateral transport of plasma followed by the formation of a new prominence 12 hr later. The formation is preceded by the appearance of a bright emission 'cloud' in the central region of the coronal cavity. The peak brightness of the cloud progressively shifts in time from the Fe XIV 211 A channel, through the Fe XII 193 A channel, to the Fe IX 171 A channel (log T{sub max} {approx} 6.2, 6.1, 5.8 K, respectively) while simultaneously decreasing in altitude. Filter ratio analysis estimates the initial temperature of the cloud to be approximately log T {approx} 6.25 K with evidence of cooling over time. The subsequent growth of the prominence is accompanied by darkening of the cavity in the 211 A channel. The observations imply prominence formation via in situ condensation of hot plasma from the coronal cavity, in support of our previously proposed process of magnetothermal convection in coronal magnetic flux ropes.

79 ASTRONOMY AND ASTROPHYSICS↗

Ultrastable lasers based on vibration insensitive cavities

We present two ultrastable lasers based on two vibration insensitive cavity designs, one with vertical optical axis geometry, the other horizontal. Ultrastable cavities are constructed with fused silica mirror substrates, shown to decrease the thermal noise limit, in order to improve the frequency stability over previous designs. Vibration sensitivity components measured are equal to or better than 1.5x10{sup -11}/m s{sup -2} for each spatial direction, which shows significant improvement over previous studies. We have tested the very low dependence on the position of the cavity support points, in order to establish that our designs eliminate the need for fine tuning to achieve extremely low vibration sensitivity. Relative frequency measurements show that at least one of the stabilized lasers has a stability better than 5.6x10{sup -16} at 1 s, which is the best result obtained for this length of cavity.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optomechanical approach to cooling of small polarizable particles in a strongly pumped ring cavity

Cavity cooling of an atom works best on a cyclic optical transition in the strong coupling regime near resonance, where small-cavity photon numbers suffice for trapping and cooling. A straightforward application to the cooling of the translational motion of other polarizable particles without sharply defined two-level transitions (such as molecules) fails as optical pumping transfers the particle into uncoupled states. An alternative operation in the far-off-resonant regime generates only very slow cooling due to the reduced field-particle coupling. We suggest one can overcome this by using a strongly driven ring cavity operated in the sideband cooling regime. The dynamics can be mapped onto the optomechanics setup with a movable mirror and allows one to take advantage of a collectively enhanced field-particle coupling by large photon numbers. A linearized analytical treatment confirmed by full numerical quantum simulations predicts fast cooling despite the off-resonant small single-particle-single-photon coupling. Even ground-state translational cooling (in the external potential) can be obtained by tuning the cavity field close to the Anti-stokes sideband for sufficiently high trapping frequency. Numerical simulations show quantum jumps of the particle between the lowest two trapping levels, which can be directly and continuously monitored via scattered light intensity detection.

74 ATOMIC AND MOLECULAR PHYSICS↗

Casimir-Polder potential and transition rate in resonating cylindrical cavities

We consider the Casimir-Polder potential of particles placed inside a metallic cylindrical cavity at finite temperatures, taking account of thermal nonequilibrium effects. In particular, we study how the resonant (thermal nonequilibrium) potential and transition rates can be enhanced by fine tuning the radius of the cavity to match the transition wavelength of the dominant transitions of the particle. Numerical calculations show that the cavity-induced energy-level shift of atoms prepared in low-lying Rydberg states can be enhanced beyond 30 kHz, which is within the range of observability of modern experiments. Because the magnitude of the resonance peaks depends sensitively on the low-frequency dissipation of the cavity metal, experiments in this setup could be a critical test of the disputed thermal correction to the Casimir force between metal plates.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Periodic revival of entanglement of two strongly driven qubits in a dissipative cavity

We present a phenomenon of an asymptotic revival of bipartite entanglement between two stable solid-state qubits interacting via a single-mode cavity subject to dissipation. This effect is achievable in cavity quantum electrodynamics systems, assisted with strong classical pumping detuned from the cavity eigenmode, under the assumption of short system-bosonic reservoir correlation times. Moreover, we prove that this effect is independent of the initial cavity state and that all initially prepared Bell states experience the same qualitative effects. We present a method that can be used to generalize an arbitrary number of solid-state qubits.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Generating single-mode behavior in fiber-coupled optical cavities

We propose to turn two resonant distant cavities effectively into one by coupling them via an optical fiber which is coated with two-level atoms [J. D. Franson et al., Phys. Rev. A 70, 062302 (2004)]. The purpose of the atoms is to destructively measure the evanescent electric field of the fiber on a time scale which is long compared to the time it takes a photon to travel from one cavity to the other. Moreover, the boundary conditions imposed by the setup should support a small range of standing waves inside the fiber, including one at the frequency of the cavities. In this way, the fiber provides an additional decay channel for one common cavity field mode but not for the other. If the corresponding decay rate is sufficiently large, this mode decouples effectively from the system dynamics. A single nonlocal resonator mode is created.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Correlated two-photon transport in a one-dimensional waveguide side-coupled to a nonlinear cavity

We investigate the transport properties of two photons inside a one-dimensional waveguide side-coupled to a single-mode nonlinear cavity. The cavity is filled with a nonlinear Kerr medium. Based on the Laplace transform method, we present an analytic solution for the quantum states of the two transmitted and reflected photons, which are initially prepared in a Lorentzian wave packet. The solution reveals how quantum correlation between the two photons emerges after the scattering by the nonlinear cavity. In particular, we show that the output wave function of the two photons in position space can be localized in relative coordinates, which is a feature that might be interpreted as a two-photon bound state in this waveguide-cavity system.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Dynamics of cavity fields with dissipative and amplifying couplings through multiple quantum two-state systems

We consider simultaneous dissipative and amplifying coupling of cavity fields to multiple two-state systems. We derive a master equation for optical field in a leaky cavity coupled to a reservoir through multiple two-state systems. In our previous works we have limited our study to systems where the reservoir either solely absorbs energy (detector setup) or adds energy (amplifying setup) to the cavity through a single two-state system. In this work we allow both interactions simultaneously and derive a reduced dynamic model for the optical field. We also generalize our model to cover the coupling of the field to several two state systems and discuss its connection to macroscopic interaction, e.g., in semiconductors. Our model includes four physical parameters: the field two-state system coupling {gamma}, the excitation and deexcitation couplings of the two-state system by the reservoir {lambda}{sub A} and {lambda}{sub D}, respectively, and the mirror losses of the cavity C. We solve the steady-state fields at different regimes of these physical parameters. Furthermore, we show that, depending on the parameters, our model can describe the operation of a detector, a light emitting diode, or a laser.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Two-photon exchange between two three-level atoms in separate cavities

The temporal evolution of two coupled cavities, each containing a single three-level atom, is studied when the cavities exchange two coherent photons. The general state of the system is a linear superposition of symmetric and antisymmetric states with the symmetric states controlled by two of the four eigenfrequencies and the antisymmetric states by the other two. The system undergoes Rabi oscillations between the two symmetric (antisymmetric) states. There is state transfer between the cavities when both atoms are in the ground state and two photons are exchanged. In addition, there is also Rabi ''flopping'' whereby one atom is in the excited state and the other in the ground state and the roles are reversed in a periodic fashion by the exchange of two photons. The generation of entanglement can be explicitly given as a function of time. Models of coupled cavities are of interest in distributed quantum information and computation.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Understanding cavity resonances with intracavity dispersion properties

We experimentally study the strongly coupled three-level atom-cavity system at both cavity and coupling frequency detuning cases. Side peak splitting and anti-crossing-like phenomena are observed under different experimental conditions. Intracavity dispersion properties are used to explain qualitatively the complicated cavity resonance structures in the composite system of inhomogeneously broadened three-level atoms inside an optical ring cavity with relatively strong driving intensities.

74 ATOMIC AND MOLECULAR PHYSICS↗

Quantum-limited amplification with a nonlinear cavity detector

We consider the quantum measurement properties of a driven cavity with a Kerr-type nonlinearity that is used to amplify a dispersively coupled input signal. Focusing on an operating regime that is near a bifurcation point, we derive simple asymptotic expressions describing the cavity's noise and response. We show that the cavity's backaction and imprecision noise allow for quantum-limited linear amplification and position detection only if one is able to utilize the sizable correlations between these quantities. This is possible when one amplifies a nonresonant signal but is not possible in quantum nondemolition qubit detection. We also consider the possibility of using the nonlinear cavity's backaction for cooling a mechanical mode.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗