Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “CAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

The mixing mechanism by organised turbulence structures in a plane jet excited by a novel method

The effect on a plane subsonic turbulent jet of controlled high-amplitude periodic oscillations applied to the nozzle is investigated experimentally. A variable-speed motor and a gear-cam mechanism are used to make the lips of the nozzle reciprocate in opposite directions at the desired frequency. Velocity profiles, flow visualizations, and pressure-signal traces are presented and analyzed in detail. The complex vortex processes involved in the oscillation-induced spreading and entrainment of the jet are explored, and a critical Strouhal number for vortex formation and amplification is determined. The oscillation technique is found to augment the thrust of a jet/duct-diffuser configuration by a factor of 1.20; the thrust increases with oscillation frequency up to 20 Hz and remains constant if the frequency is further increased.

Badri Narayanan, M. A.↗

AVIRIS scan drive design and performance

The Airborne Visible/Infrared Imaging Spectrometer (AVIRIS) images the ground with an instantaneous field of view (IFOV) of 1 mrad. The IFOV is scanned 30 deg from left to right to provide the cross-track dimension of the image, while the aircraft's motion provides the along-track dimension. The scanning frequency is 12 Hz, with a scan efficiency of 70 percent. The scan mirror has an effective diameter of 5.7 in, and its positional accuracy is a small fraction of a milliradian of the nominal position-time profile. Described are the design and performance of the scan drive mechanism. Tradeoffs among various approaches are discussed, and the reasons given for the selection of the cam drive.

Miller, D. C.↗

Georeferencing airborne imagery over new deltas in Louisiana

An experiment to study the hypothesis that winter cold fronts are more important that violent summer storms in moving sediment in midlatitude coastal river deltas. The experiment is based on Calibrated Airborne Multispectral Scanner (CAMS) data. A new approach for the georeferencing of aircraft imagery has been developed for use in this experiment. The software for the approach uses the aircraft inertial navigation data and is able to automatically map a three-channel 1600 line file through a 90 deg rotation in less than 14 minutes. Results from tests of the technique show rms errors of less than 2/3 of a pixel.

Rickman, Doug↗

Robot Hand Would Adapt To Contours

Conceptual device uses hydraulic pressure to activate fingers. Projections on opposing fingers of proposed robot hand automatically conform to contours of object on contact. Pistons connected to common reservoir provide gentle, firm grip. Fingers communicate with each other via hydraulic pressure, without elaborate control system. Pistons move in and out, and tips slope to match contour of object. Their action tends to center object on finger. Hand used to grasp objects of various shapes and sizes. Conforming process passive; pressure of object on one or several pad elements forces other pad elements to touch it. Would not use elaborate mechanisms involving motors, cams, and cables.

Collins, Earl R., Jr.↗

Cost-effective use of liquid nitrogen in cryogenic wind tunnels, phase 2

Cryogenic seal tests were performed and Rulon A was selected for the subject nutating positive displacement expander. A four-chamber expander was designed and fabricated. A nitrogen reliquefier flow system was also designed and constructed for testing the cold expander. Initial tests were unsatisfactory because of high internal friction attributed to nutating Rulon inlet and outlet valve plates. Replacement of the nutating valves with cam-actuated poppet valves improved performance. However, no net nitrogen reliquefaction was achieved due to high internal friction. Computer software was developed for accurate calculation of nitrogen reliquefaction from a system such as that proposed. These calculations indicated that practical reliquefaction rates of 15 to 19 percent could be obtained. Due to mechanical problems, the nutating expander did not demonstrate its feasibility nor that of the system. It was concluded that redesign and testing of a smaller nutating expander was required to prove concept feasibility.

Mcintosh, Glen E.↗

IUE and optical data during the low state of H0538 + 608 (BY Camelopardalis)

IUE short- and long-wavelength spectra, CCD differential BR photometry, and a portion of a J light curve were obtained during January-March 1989 when H0538 + 608 (BY Cam) was in a low state about 3 magnitudes below its normal high-state V magnitude. The IUE short-wavelength spectrum showed that all the strong emission lines apparent at the high state had disappeared while the continuum flux had decreased by about a factor of 3. The B and R data show large (0.8 and 1.5 mag) spikelike increases in light near phase 0.75, while the B light curve shows a slow modulation with peak intensity near phase 0.3. The implications are that both poles are still producing some emission, although the accretion onto the main pole is much reduced from the high-state value. In comparison to the low state of AM Her, the UV and IR fluxes would be consistent with viewing a hot white dwarf and a late-main-sequence secondary at a distance of several hundred pc.

Szkody, Paula↗

Interplanetary crew exposure estimates for the August 1972 and October 1989 solar particle events

Detailed exposure estimates for the bone marrow, ocular lens, and skin of astronauts on manned missions beyond the earth's magnetosphere have been made for the large solar particle events (SPE) of August 1972 and October 1989. The estimates were made using the coupled neutron-proton space radiation transport computer code BRYNTRN and the CAM model for the human body. It is found that at least 10 g/sq cm aluminum shielding is needed to keep estimated dose equivalent values below current space radiation exposure guidelines recommended for LEO missions. Space suits currently being designed will not provide adequate crew protection and may not even ensure crew survival in the event of exposure to a large SPE during extravehicular activity.

Townsend, Lawrence W.↗

Two-Axis Track Rollers

Compact, lightweight design reduces side friction. Set of proposed two-axis track rollers enables sliding door to follow curved track in both directions without binding. Combination of cylindrical cam-follower-type roller and large ball end roller. Intended for use on sliding hatch covers on proposed Space Station Freedom, also useful on Earth to ensure ease and reliability of motion in sliding doors, windows, covers, and partitions.

Melinick, John M.↗

A basis for solid modeling of gear teeth with application in design and manufacture

A new approach to modeling gear tooth surfaces is discussed. A computer graphics solid modeling procedure is used to simulate the tooth fabrication process. This procedure is based on the principles of differential geometry that pertain to envelopes of curves and surfaces. The procedure is illustrated with the modeling of spur, helical, bevel, spiral bevel, and hypoid gear teeth. Applications in design and manufacturing are discussed. Extensions to nonstandard tooth forms, to cams, and to rolling element bearings are proposed.

Huston, Ronald L.↗

The first spectropolarimetric study of the wavelength dependence of interstellar polarization in the ultraviolet

The first UV spectropolarimetry along six lines of sight with significant interstellar polarization is reported. The observations were obtained with the Wisconsin Ultraviolet Photo-Polarimeter Experiment (WUPPE) during the Astro-1 mission. HD 37903, HD 62542 and HD 99264 show a wavelength dependence which follows the Serkowski relation extrapolated into the UV. HD 25443 and Alpha Cam have UV polarization well in excess of the Serkowski extrapolation. HD 197770 clearly shows a polarization bump which closely matches the 2175 A extinction feature. This bump polarization can be fitted by small aligned graphite disks. The differences along various lines of sight might be the result of differences in the environments which affect the size and alignment of the grains.

Clayton, Geoffrey C.↗

High-resolution imaging of QSO 2305 + 187 (= 4C 18.68)

Optical imaging of QSO 2305 + 187 with resolution ranging from 0.1 to 1.0 arcsec in continuum and line emission is presented. The data are from FOCAM and the HR Cam of the Canada-France-Hawaii Telescope, and the Wide Field Camera of the Hubble Space Telescope. These are compared with previously published optical and radio images. The QSO host galaxy has the basic properties of an elliptical, but has significant irregularities, and tidal tails which indicate an ongoing gravitational interaction with a close companion.

Hutchings, J. B.↗

H0538 + 608 (= BY Camelopardalis) - An asynchronously rotating AM Herculis binary?

Evidence from a concurrent X-ray/optical observing program is presented which indicates that the orbital period of the anomalous AM Her-type cataclysmic variable H0538 + 608 (BY Cam) differs from the rotational period by 1.3 +/- 0.1 percent. This finding would explain much of the unusual behavior previously exhibited in optical photometry and polarimetry. The model proposed by Ishida et al. (1991) is developed further using observations of accretion and the primary characteristics of optical and X-ray light curves and radial velocity measures of H-alpha. An optical QPO with a period of about 30 min was seen on two nights and possible causes of it are discussed.

Silber, A.↗

Magnetostrictive Roller-Drive Stepping Motor

Proposed motor based on magnetostrictive effect provides stepped angular motion with angular increments of order of 100 microradians. Driven to repeat stepping cycle rapidly enough to achieve maximum speed of about 20 rpm, provides torque an order of magnitude greater than electric motors, and brakes itself when power turned off. Magnetostrictive rods in electromagnet coils push against drive plate, causing it to rotate slightly. This slight rotation jams conical rollers between cam surfaces on outer drive ring and split drum, so rollers transmit rotation to drum. Suitable for precise, high-torque, fail-safe-braking, direct drive of robot joint, without bulk and weight of additional brake mechanism and gear train.

Vranish, John M.↗

Preloaded latching device

A latching device is disclosed which is lever operated sequentially to actuate a set of collet fingers to provide a radial expansion and to actuate a force mechanism to provide a compressive gripping force for attaching first and second devices to one another. The latching device includes a body member having elongated collet fingers which, in a deactuated condition, is insertable through bores on the first and second devices so that gripping terminal portions on the collet fingers are proximate to the end of the bore of the first device while a spring assembly on the body member is located proximate to the outer surface of a second device. A lever is rotatable through 90 deg to move a latching rod to sequentially actuate and expand collet fingers and to actuate the spring assembly by compressing it. During the first 30 deg of movement of the lever, the collet fingers are actuated by the latching rod to provide a radial expansion and during the last 60 deg of movement of the lever, the spring assembly acts as a force mechanism and is actuated to develop a compressive latching force on the devices. The latching rod and lever are connected by a camming mechanism. The amount of spring force in the spring assembly can be adjusted; the body member can be permanently attached by a telescoping assembly to one of the devices; and the structure can be used as a pulling device for removing annular bearings or the like from blind bores.

Wesselski, Clarence J.↗

Circuit design tool. User's manual, revision 2

The CAM chip design was produced in a UNIX software environment using a design tool that supports definition of digital electronic modules, composition of these modules into higher level circuits, and event-driven simulation of these circuits. Our design tool provides an interface whose goals include straightforward but flexible primitive module definition and circuit composition, efficient simulation, and a debugging environment that facilitates design verification and alteration. The tool provides a set of primitive modules which can be composed into higher level circuits. Each module is a C-language subroutine that uses a set of interface protocols understood by the design tool. Primitives can be altered simply by recoding their C-code image; in addition new primitives can be added allowing higher level circuits to be described in C-code rather than as a composition of primitive modules--this feature can greatly enhance the speed of simulation.

Miyake, Keith M.↗

An investigative study of multispectral data compression for remotely-sensed images using vector quantization and difference-mapped shift-coding

A study is conducted to investigate the effects and advantages of data compression techniques on multispectral imagery data acquired by NASA's airborne scanners at the Stennis Space Center. The first technique used was vector quantization. The vector is defined in the multispectral imagery context as an array of pixels from the same location from each channel. The error obtained in substituting the reconstructed images for the original set is compared for different compression ratios. Also, the eigenvalues of the covariance matrix obtained from the reconstructed data set are compared with the eigenvalues of the original set. The effects of varying the size of the vector codebook on the quality of the compression and on subsequent classification are also presented. The output data from the Vector Quantization algorithm was further compressed by a lossless technique called Difference-mapped Shift-extended Huffman coding. The overall compression for 7 channels of data acquired by the Calibrated Airborne Multispectral Scanner (CAMS), with an RMS error of 15.8 pixels was 195:1 (0.41 bpp) and with an RMS error of 3.6 pixels was 18:1 (.447 bpp). The algorithms were implemented in software and interfaced with the help of dedicated image processing boards to an 80386 PC compatible computer. Modules were developed for the task of image compression and image analysis. Also, supporting software to perform image processing for visual display and interpretation of the compressed/classified images was developed.

Jaggi, S.↗

Rutger's CAM2000 chip architecture

This report describes the architecture and instruction set of the Rutgers CAM2000 memory chip. The CAM2000 combines features of Associative Processing (AP), Content Addressable Memory (CAM), and Dynamic Random Access Memory (DRAM) in a single chip package that is not only DRAM compatible but capable of applying simple massively parallel operations to memory. This document reflects the current status of the CAM2000 architecture and is continually updated to reflect the current state of the architecture and instruction set.

Smith, Donald E.↗

Broad-band X-ray telescope observations of the magnetic cataclysmic variable H0538 + 608 = BY Camelopardalis

We report on BBXRT observations of the cataclysmic variable H0538 + 608 (BY Cam). The unexcelled energy resolution of BBXRT in the vicinity of the iron K line allows the line strength and energy to be constrained more tightly than has previously been possible. We are able to rule out a significant contribution from fluorescence on iron more neutral than Fe XVIII. Implications for the conditions in the accreting gas are discussed.

Kallman, T. R.↗