Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Band structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 1,081 records · Page 60

Low-energy excitations in type-II Weyl semimetal T d - MoTe 2 evidenced through optical conductivity

Molybdenum ditelluride, MoTe 2 , is a versatile material where the topological phase can be readily tuned by manipulating the associated structural phase transition. The fine details of the band structure of MoTe 2 , key to understanding its topological properties, have proven difficult to disentangle experientially due to the multiband character of the material. Through experimental optical conductivity spectra, we detect two strong low-energy interband transitions. Both are linked to excitations between spin-orbit split bands. The lowest interband transition shows a strong thermal shift, pointing to a chemical potential that dramatically decreases with temperature. Finally, with the help of ab initio calculations and a simple two-band model, we give qualitative and quantitative explanations of the main features in the temperature-dependent optical spectra up to 400 meV.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Molecular beam epitaxy of phase-pure antiperovskite Sr 3 SnO thin films

The antiperovskite oxide Sr 3 SnO has attracted substantial interest due to its topologically non-trivial band structure. Sr-deficient Sr3-xSnO can become superconducting, making it a candidate intrinsic topological superconductor. Here, we show that epitaxial, phase-pure Sr 3-x SnO films can be synthesized by molecular beam epitaxy (MBE) using solid Sr and SnO 2 sources. Here, we show that Sn-rich growth conditions result in a large amount of a Sn-rich impurity phase, which is challenging to detect in x-ray diffraction. Carrier densities and the amount of the impurity phase change systematically with the growth conditions, indicating that MBE provides excellent control over the films' stoichiometry. We discuss the electrical properties, including quantum interference phenomena, which support the topological nature of the films.

36 MATERIALS SCIENCE↗

Nonlinear optics in 2D materials: From classical to quantum

Nonlinear optics has long been a cornerstone of modern photonics, enabling a wide array of technologies, from frequency conversion to the generation of ultrafast light pulses. Recent breakthroughs in two-dimensional (2D) materials have opened a frontier in this field, offering new opportunities for both classical and quantum nonlinear optics. These atomically thin materials exhibit strong light–matter interactions and large nonlinear responses, thanks to their tunable lattice symmetries, strong resonance effects, and highly engineerable band structures. In this paper, we explore the potential that 2D materials bring to nonlinear optics, covering topics from classical nonlinear optics to nonlinearities at the few-photon level. We delve into how these materials enable possibilities, such as symmetry control, phase matching, and integration into photonic circuits. The fusion of 2D materials with nonlinear optics provides insights into the fundamental behaviors of elementary excitations—such as electrons, excitons, and photons—in low-dimensional systems and has the potential to transform the landscape of next-generation photonic and quantum technologies.

2D materials↗

Electronic Structure of In2O3 from Resonant X-ray Emission Spectroscopy

The valence and conduction band structures of In2O3 have been measured using a combination of valence band x-ray photoemission spectroscopy, O K-edge resonant x-ray emission spectroscopy, and O K-edge x-ray absorption spectroscopy. Excellent agreement is noted between the experimental spectra and O 2p partial density of states calculated within hybrid density functional theory. Our data are consistent with a direct band gap for In2O3.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Exploring transport mechanisms in atomic precision advanced manufacturing enabled pn junctions

We investigate the different transport mechanisms that can occur in pn junction devices made using atomic precision advanced manufacturing at temperatures ranging from cryogenic to room temperature. We first elucidate the potential cause of the anomalous behavior observed in the forward-bias response of these devices in recent cryogenic temperature measurements, which deviates from the theoretical response of a silicon Esaki diode. These anomalous behaviors include current suppression at low voltages in the forward-bias response and a much lower valley voltage at cryogenic temperatures than theoretically expected for a silicon diode. To investigate the potential causes of these anomalies, we studied the effects of a few possible transport mechanisms, including band-to-band tunneling, bandgap narrowing, potential impact of non-Ohmic contacts, band quantization, impact of leakage, and inelastic trap-assisted tunneling, through semi-classical simulations. We find that a combination of two sets of band-to-band tunneling (BTBT) parameters can qualitatively approximate the shape of the tunneling current at low bias. This can arise from band quantization and realignment due to the strong potential confinement in δ-layers. We also find that the lower-than-theoretically-expected valley voltage can be attributed to modifications in the electronic band structure within the δ-layer regions, leading to a significant bandgap narrowing induced by the high density of dopants. Finally, we extend our analyses to room temperature operation and predict that trap-assisted tunneling (TAT) facilitated by phonon interactions may become significant, leading to a complex superposition of BTBT and TAT transport mechanisms in the electrical measurements.

band gap↗

Quasiparticle dynamics across the full Brillouin zone of Bi 2 Sr 2 CaCu 2 O 8+δ traced with ultrafast time and angle-resolved photoemission spectroscopy

A hallmark in the cuprate family of high-temperature superconductors is the nodal-antinodal dichotomy. In this regard, angle-resolved photoemission spectroscopy (ARPES) has proven especially powerful, providing band structure information directly in energy-momentum space. Time-resolved ARPES (trARPES) holds great promise of adding ultrafast temporal information, in an attempt to identify different interaction channels in the time domain. Previous studies of the cuprates using trARPES were handicapped by the low probing energy which significantly limits the accessible momentum space. Using 20.15eV, 12 fs pulses we show for the first time the evolution of quasiparticles in the antinodal region of Bi 2 Sr 2 CaCu 2 O 8+δ and demonstrate that nonmonotonic relaxation dynamics dominates above a certain fluence threshold. The dynamics is heavily influenced by transient modification of the electron-phonon interaction and phase space restrictions, in severe contrast to the monotonic relaxation in the nodal and off-nodal regions.

36 MATERIALS SCIENCE↗

Electronic and magnetic properties of quasi-one-dimensional osmium halide OsCl 4

Using ab initio density functional theory, we study the electronic and magnetic properties of the van der Waals chain material OsCl 4 . In the nonmagnetic state, a strongly anisotropic band structure was observed, in agreement with its anticipated one-dimensional crystal geometry. Based on Wannier functions, we found that the four electrons of the 5d Os atom form a low-spin S = 1 state, with a large crystal field between the d xz/yz and d xy orbitals, corresponding to a strong Jahn–Teller distortion (Q 3 < 0). As a consequence, the magnetic properties are mainly contributed by the d xz/yz states. Furthermore, when a Mott gap develops after the introduction of the Hubbard U and Hund coupling J, we found that the staggered spin order is the most likely magnetic state, namely, spins arranged as (↑-↓-↑-↓) with π wavevector along the chain. In addition, the energy differences between various spin states are small, suggesting a weak magnetic exchange coupling along the chain. Overall, our results provide guidance to experimentalists and theorists working on quasi-one-dimensional osmium halides chain materials.

36 MATERIALS SCIENCE↗

Quasiparticle energies and dielectric functions of diamond polytypes

In this work, we perform ab initio many-body Green’s function calculations to investigate the quasiparticle energies and optical properties of diamond polytypes that have been predicted to be producible via a pressure-induced structural phase transition from carbon nanotube solids.We find, through quasiparticle band-structure calculations within the GW approximation, that the band gaps of two hexagonal (2H- and 4H-type) polytypes of diamond differ significantly from that of cubic diamond as well as from that of the crystalline sp 3 carbon phase with a body-centered-tetragonal structure, called bct C 4 . We also examine the dielectric functions of three polytypes of diamond (cubic, 2H, and 4H) by employing the GW plus Bethe-Salpeter equation approach. The calculated optical absorption spectra are found to be distinct from each other. The lattice mismatches of carbon layers of these diamond polytypes are very small and the total-energy differences are also small. Our work opens up the possibility of fabricating diamond superlattices with various electronic and optoelectronic properties by utilizing and controlling the different stacking sequences of carbon layers.

36 MATERIALS SCIENCE↗

Ortho-para interconversion in cation-water complexes: The case of V + (H 2 O) and Nb + (H 2 O) clusters

Vanadium and niobium cation-water complexes, V + (H 2 O) and Nb + (H 2 O), are produced by laser vaporization in a pulsed supersonic expansion, mass selected in a time-of-flight spectrometer, and studied with infrared photodissociation spectroscopy using rare gas atom (Ar, Ne) complex predissociation. The vibrational bands measured in the O–H stretching region contain K-type rotational sub-band structure, which provides insight into the structures of these complexes. However, rotational sub-bands do not exhibit the simple patterns seen previously for other metal ion-water complexes. We report the $A$ rotational constants are smaller than expected and the normal 1:3 intensity ratios for K = even:odd levels for independent ortho:para nuclear spin states are missing for some complexes. We relied on highly correlated internally contracted Multi-Reference Configuration Interaction (icMRCI) and Coupled Cluster [CCSD(T)] electronic structure calculations of those complexes with and without the rare gas atoms to investigate these anomalies. Rare gas atoms were found to bind via asymmetric motifs to the hydrated complexes undergoing large amplitude motions that vibrationally average to quasi-C 2v symmetry with significant probability off the C 2 axis, thus explaining the reduced $A$ values. Both vanadium and iobium cations exhibit unusually strong nuclear spin coupling to the hydrogen atoms of water, the values of which vary with their electronic state. This catalyzes ortho-para interconversion in some complexes and explains the rotational patterns. The rate of ortho-para relaxation in the equilibrated complexes must therefore be greater than the collisional cooling rate in the supersonic expansion (about 106 sec-1).

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Revealing the intrinsic transport properties of antiperovskite Sr 3 SnO thin films

A topologically non-trivial band structure and reports of superconductivity have motivated significant investigation into the transport properties of the antiperovskite oxide Sr 3 SnO. Phase-pure films of Sr 3 SnO can be grown by molecular beam epitaxy, but they do not have the required extremely high hole-doping densities (>1 × 10 21 cm –3 ) for which superconductivity has been observed in bulk materials. To date, high hole-doping densities have been achieved via inducing strontium deficiency, which inevitably results in impurity phases. Here, we show that indium acts as an effective hole dopant in Sr 3 SnO and can be used to achieve high hole doping densities in stoichiometric films. Films with carrier densities as high as 1.5 × 10 21 cm –3 remain non-superconducting. We, therefore, suggest that Sr 3 SnO is probably not an intrinsic superconductor. A second question addressed in this work is the measurement of the intrinsic electrical transport properties of Sr 3 SnO, given its rapid degradation in air. We show that even in inert atmospheres, reducing the time needed for establishing electrical contacts and protecting the Sr 3 SnO film result in improved electrical properties. Here, we demonstrate low carrier density films (4 × 10 18 cm –3 ) with carrier mobilities of 400 cm 2 V –1 s –1 at 10 K.

36 MATERIALS SCIENCE↗

Configuration Dependence of the Electronic Structure and Optical Property of BC2N Alloys

Using the first-principles band structure and total energy method, we have studied the general trend of physical properties of the BC{sub 2}N alloy as a function of atomic configurations. We found that the mechanical properties of the BC{sub 2}N alloy are basically determined by the bond components: structures with more C-C and B-N bonds have low energy, high density, and high bulk and shear moduli, which validates the so called the bond counting rule. We also show that the electronic and optical properties of the BC{sub 2}N alloy are more sensitive to the atomic configuration, thus could be used in future experimental measurement to identify the atomic configuration of BC{sub 2}N samples. A strong internal electric field produced by the polar interfaces is observed in the long period BC{sub 2}N{sub n x n} (111) superlattices, which explains the significant band gap decrease as the period n increases.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Magnetotransport and electronic structure of the antiferromagnetic semimetal YbAs

A number of rare-earth monopnictides have topologically nontrivial band structures together with magnetism and strong electronic correlations. In order to examine whether the antiferromagnetic (AFM) semimetal YbAs (TN=0.5 K) exhibits such a scenario, we have grown high-quality single crystals using a flux method, and characterized the magnetic properties and electronic structure using specific heat, magnetotransport, and angle-resolved photoemission spectroscopy (ARPES) measurements, together with density functional theory (DFT) calculations. Both ARPES and DFT calculations find no evidence for band inversions in YbAs, indicating a topologically trivial electronic structure. From low-temperature magnetotransport measurements, we map the field-temperature phase diagram, where we find the presence of a field stabilized phase distinct from the AFM phase at low temperatures. Additionally, an extremely large magnetoresistance (XMR) for both YbAs and the nonmagnetic counterpart LuAs is also observed, which can consistently be accounted for by the presence of electron-hole compensation. Moreover, an angle-dependent study of the Shubnikov-de Haas effect oscillations reveals very similar Fermi surfaces between YbAs and LuAs, with light effective masses down to at least 0.5 K, indicating that the Yb-4f electrons are well localized, and do not contribute to the Fermi surface. However, the influence of the localized Yb-4f electrons on the magnetotransport of YbAs can be discerned from the distinct temperature dependence of the XMR compared to that of LuAs, which we attribute to the influence of short-ranged spin correlations that appear well above TN.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Structural and thermoelectric properties of zintl-phase CaLiPn (Pn=As, Sb, Bi)

First-principles calculations were carried out to study the structural, mechanical, dynamical and transport properties of zintl phase materials CaLiPn (Pn=As, Sb and Bi). We have used two different approaches to solve the system based on density functional theory. The plane wave pseudopotential approach has been used to study the structural and dynamical properties whereas, full potential linear augment plane wave method is used to examine the electronic structure, mechanical and thermoelectric properties. The calculated ground-state properties agree quite well with experimental values. The computed electronic structure shows the investigated compounds to be direct band gap semiconductors. Further, we have calculated the thermoelectric properties of all the investigated compounds for both the carriers at various temperatures. We found a high thermopower for both the carriers, especially n-type doping to be more favourable, which enabled us to predict that CaLiPn might have promising applications as a good thermoelectric material. Further, the phonon dispersion curves of the investigated compounds showed flat phonon modes and we also find lower optical and acoustic modes to cut each other at the lower frequency range, which further indicate the investigated compounds to possess reasonably low thermal conductivity. We have also analysed the low value of the thermal conductivity through the empirical relations and discussions are presented here. - Highlights: • Electronic band structure and chemical bonding. • Single crystalline elastic constants and poly crystalline elastic moduli. • Thermoelectric properties of zintl phase. • Lattice dynamics and phonon density of states.

36 MATERIALS SCIENCE↗

Optical-Vibrational Properties of the Cs 2 SnX 6 (X = Cl, Br, I) Defect Perovskites and Hole-Transport Efficiency in Dye-Sensitized Solar Cells

We report the vibrational and optical properties of the ‘defect’ perovskites Cs 2 SnX 6 (X = Cl, Br, I) as well as their use as hole-transporting materials (HTMs) in solar cells. All three air-stable compounds were characterized using powder X-ray diffraction and Rietveld refinement. Far-IR reflectance, Raman, and UV–vis spectroscopy as well as electronic band structure calculations show that the compounds are direct band gap semiconductors with a pronounced effect of the halogen atom on the size of the energy gap and the vibrational frequencies. Scanning electron microscopy and atomic force microscopy confirmed that the morphology of the perovskite films deposited from $N,N$-dimethylformamide solutions on TiO 2 substrates also strongly depends on the chemical composition of the materials. The Cs 2 SnX 6 perovskites were introduced as hole-transporting materials in dye-sensitized solar cells, based on mesoporous titania electrodes sensitized with various organic and metal–organic dyes. The solar cells based on Cs 2 SnI 6 HTM and the Z907 dye performed best with a maximum power conversion efficiency of 4.23% at 1 sun illumination. The higher performance of Cs 2 SnI 6 is attributed to efficient charge transport in the bulk material and hole extraction at the perovskite-Pt interface, as evidenced by electrochemical impedance spectroscopy.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Signature of Metallic Behavior in the Metal–Organic Frameworks M 3 (hexaiminobenzene) 2 (M = Ni, Cu)

The two-dimensionally connected metal- organic frameworks (MOFs) Ni 3 (HIB) 2 and Cu 3 (HIB) 2 (HIB = hexaiminobenzene) are bulk electrical conductors and exhibit ultraviolet-photoelectron spectroscopy (UPS) signatures expected of metallic solids. Electronic band structure calculations confirm that in both materials the Fermi energy lies in a partially filled delocalized band. Together with additional structural characterization and microscopy data, our results represent the first report of metallic behavior and permanent porosity coexisting within a metal-organic framework.

36 MATERIALS SCIENCE↗

Advances in Two-Dimensional Organic-Inorganic Hybrid Perovskites

Two-dimensional (2D) perovskites have attracted considerable interest for their promising applications for solar cells and other optoelectronics, such as light-emitting diodes, spintronics, and photodetectors. In this paper, we review the recent achievements of 2D perovskites for various optoelectronic applications. First, we discuss the basic structure and optoelectronic properties of 2D perovskites, including band structure, optical properties, and charge transport. We then highlight recent achievements using 2D perovskites in solar cells and beyond solar cells, including progress on various synthesis strategies and their impact on structural and optoelectronic properties. Finally, we discuss current challenges and future opportunities to further develop 2D perovskites for various applications.

14 SOLAR ENERGY↗